INSTRUCTIONSEguardhouse

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Assembly instructions / hints and tips

Model: Guard House You will need:


Skill level: Intermediate 1) Sharp craft knife.
Construction time: +/- 2 hours 2) Pair of scissors.
3) Glue (white clear drying PVA glue is recommended).

Johan Kruger 2004 © Tips


miniature-games.com Score the edges that you need to fold, with a craft
knife.

Once the model is completed white edges, where the


model has been scored and folded, will be visible.
With diluted black paint gently run a small paintbrush
over these white edges. This will greatly enhance the
overall appearance of your model.

Cut out all sections that are diagonally lined.

The model should be assembled according to the


numbers displayed in the diagram.

1. Assemble the top wooden outlook room.


2. Fold the roof as shown and glue wooden outlook
room to roof.
3. Assemble first floor and glue roof and wooden
outlook room to first floor.
4. Assemble chimney
5. Assemble the centre archway.
6. Assemble the Ground floor gluing the chimney and
first floor into place, once dried insert the centre
archway and glue into place.

7. Download the free archery targets and short walls


from http://www.miniature-games.com

The use of sharp instruments should be done under the supervision of an adult.
The author and distributors of this product will not be held liable for any injuries caused during or after assembly of this product.

You might also like