Professional Documents
Culture Documents
RX-2 Datasheet
RX-2 Datasheet
General Description
The TX2/RX2 are a pair of CMOS LSIs designed for remote controlled car applications. TX2
Is the transmitter and RX2 is the receiver. They provide five function key to control forward, Backward,
Rightward, Leftward and Turbo motions. Beside,a combination of these five motions can be played.
RX2 Provide two high effective amplifiers and Enhance Signal Input recognition capacity to enhance remote
control distance.
Peripheral Features:
! 5-function remote controller controlling forward/ backward/ turbo/ right/ left.
! Few external components needed.
Application Field:
! remote controlled toy.
! remote electric appliance controller.
1
http://www.hlec.com.cn
深圳市高地电子有限公司
EC HIGHLAND (SHENZHEN) ELECTRONICS CO., LTD
TX2/RX2
2
http://www.hlec.com.cn
深圳市高地电子有限公司
EC HIGHLAND (SHENZHEN) ELECTRONICS CO., LTD
TX2/RX2
VO2 1 16 VI2
GND VO1 Decoding
2 15 SI AMP Circuit Counter
SI 3 14 VI1
OSCI 4 13 VDD
RX2C VI1 VO1 PLA
RIGHT
OSCO 5 12 TURBO
6 11 FORWARD
VI2 VO2 RIGHT
LEFT 7 10 BACKWARD LEFT
RDB LDB Latch TURBO
8 9 LDB Control BACKWARD
RDB Logic
FORWARD
3
http://www.hlec.com.cn
深圳市高地电子有限公司
EC HIGHLAND (SHENZHEN) ELECTRONICS CO., LTD
TX2/RX2
Electrical Characteristics
TX2
(VDD=4.5V, Fosc = 128KHz, TA=25°C, unless otherwise specified.)
Parameter Symbol Min. Typ. Max.
Operating Voltage VDD 2.2V 4.5V 5.0V
Operating Current Idd - - 1mA
Stand-by Current Istb - - 1µA
DC O/P Driving Current Idrive 3mA - -
AC O/P Driving Current Idrive 3mA - -
AC O/P Frequency Faudio 500Hz - 1KHz
RX2
(VDD=4.5V, Fosc = 128KHz, TA=25°C, unless otherwise specified.)
Parameter Symbol Min. Typ. Max.
Operating Voltage VDD 2.2V 4.5V 5.0V
Operating Current Idd - - 0.7mA
O/P Driving Current Idrive 0.6mA - -
O/P Sinking Current Isink 0.6mA - -
Effect Decoding
Ftolerance -20% - 20%
Frequency Variation
4
http://www.hlec.com.cn
深圳市高地电子有限公司
EC HIGHLAND (SHENZHEN) ELECTRONICS CO., LTD
TX2/RX2
Pin Description
TX2
Pin No. Designation Description
1 RIGHTB The rightward function will be selected when this pin is connected to GND.
2 TESTB This pin is used for testing purpose only.
3 GND Negative power supply
4 BACKWARDB The backward function will be selected when this pin is connected to GND.
5 FORWARDB The forward function will be selected when this pin is connected to GND.
6 TURBOB The turbo function will be selected when this pin is connected to GND.
7 SC Output pin of the encoding signal with carrier frequency
8 SO Output pin of the encoding signal without carrier frequency
9 VDD Positive power supply
10 PC Power control output pin
11 OSCO Oscillator output pin
12 OSCI Oscillator input pin
13 FOSC This pin is used for testing purpose.
14 LEFTB The leftward function will be selected when this pin is connected to GND.
RX2
Pin No. Designation Description
1 VO2 Inverter 2 output pin for power amplify
2 GND Negative power supply
3 SI Input pin of the encoding signal
4 OSCI Oscillator input pin
5 OSCO Oscillator output pin
6 RIGHT Rightward output pin
7 LEFT Leftward output pin
8 RDB Rightward function is disabled when this pin is connected to GND.
9 LDB Leftward function is disabled when this pin is connected to GND.
10 BACKWARD Backward output pin
11 FORWARD Forward output pin
12 TURBO Turbo output pin
5
http://www.hlec.com.cn
深圳市高地电子有限公司
EC HIGHLAND (SHENZHEN) ELECTRONICS CO., LTD
TX2/RX2
Bit Format
1KHz
W2
500Hz 75% Duty cycle
Data Format
W2 W2 W2 W2 (n) x W1 W2 W2 W2 W2 (n) x W1 W2 W2 W2 W2
W2 W2 W2 W2 W2 W2 W2 W2
W1 W1 W1 W1 W1 W1
1 2 3 4
1 2 3 4 n-th
start code
function code
1 word
7
http://www.hlec.com.cn
深圳市高地电子有限公司
EC HIGHLAND (SHENZHEN) ELECTRONICS CO., LTD
TX2/RX2
Encode/Decode Timing
(A)
Decode output
9ms 9ms
(B)
SI
Decode output
T= 17 ms + (nW1) x 1 ms
8
http://www.hlec.com.cn
深圳市高地电子有限公司
EC HIGHLAND (SHENZHEN) ELECTRONICS CO., LTD
TX2/RX2
B500K Ω
VCC
SI R.F.
14 13 12 11 10 9 8 Circuit
LEFTB FOSC OSCI OSCO PC VDD SO GND
TX2C
RIGHTB TESTB GND BACKWARDB FORWARDB TURBOB SC
1 2 3 4 5 6 7
9
http://www.hlec.com.cn
深圳市高地电子有限公司
EC HIGHLAND (SHENZHEN) ELECTRONICS CO., LTD
TX2/RX2
power switch
+ 16 15 14 13 12 11 10 9
100 µ F - VI2 VO1 VI1 VDD TURBO FORWARD BACKWARD LDB
4.3V RX2C
VO2 GND SI OSCI OSCO RIGHT LEFT RDB
VCC 1 2 3 4 5 6 7 8
R.F.
Circuit
GND
B500K Ω
+
DC:3V 100 µ 1-4.7 Ω
-
f=114KHz
Photo Diode
14 13 12 11 10 9 8
LEFTB FOSC OSCI OSCO PC VDD SO
TX2C
RIGHTB TESTB GND BACKWARDB FORWARDB TURBOB SC
1 2 3 4 5 6 7
8050
10
http://www.hlec.com.cn
深圳市高地电子有限公司
EC HIGHLAND (SHENZHEN) ELECTRONICS CO., LTD
TX2/RX2
100K
VDD
+ 16 15 14 13 12 11 10 9
OUT 57KHz
DC: 5V - 100 µ F VI2 VO1 VI1 VDD TURBO FORWARD BACKWARD LDB
IR Receiver
1815 GND
RX2C
VO2 GND SI OSCI OSCO RIGHT LEFT RDB
1 2 3 4 5 6 7 8
f=114KHz
Testing Circuit
Fosc for TX2 ≅ Fosc, RX2 ≅ 128 ΚΗz
FORWARD
TURBO BACKWARD
14 13 12 11 10 9 8 16 15 14 13 12 11 10 9
+
100 µ -
TX2C RX2C
1 2 3 4 5 6 7 1 2 3 4 5 6 7 8
11
http://www.hlec.com.cn
深圳市高地电子有限公司
EC HIGHLAND (SHENZHEN) ELECTRONICS CO., LTD
TX2/RX2
Bonding Diagram
TX2
Designation X Y
FORWARDB
OSCO
Unit:in um
X: 1240 Y: 1240
BACKWARDB
Note: Substrate is connected to VDD
OSCI
RIGHTB
LEFTB TESTB GND
FOSC
about 1.24 mm
12
http://www.hlec.com.cn
深圳市高地电子有限公司
EC HIGHLAND (SHENZHEN) ELECTRONICS CO., LTD
TX2/RX2
RX2
Designation X Y
13
http://www.hlec.com.cn