Professional Documents
Culture Documents
Velocimeter 330500 Datasheet
Velocimeter 330500 Datasheet
Datasheet
Bently Nevada Machinery Condition Monitoring 141632 Rev. R
Description
Bently Nevada Velomitor Piezo-velocity Sensors are designed
to measure absolute (relative to free space) bearing housing,
casing, or structural vibration. The 330500 is a specialized
piezoelectric accelerometer that incorporates embedded
integrated electronics in a solid-state design.
Because the 330500 incorporates solid-state electronics and
has no moving parts, it does not suffer from mechanical
degradation and wear, and can be mounted vertically,
horizontally, or at any other angle of orientation
2/14
330500 Velomitor Piezo-velocity Sensor
Datasheet 141632 Rev. R
Transverse
Less than 5% of sensitivity.
Sensitivity
Mounted
Resonant Greater than 12 kHz.
Frequency
Dynamic
Output Less than 2400 Ω
Impedance
Broadband
0.004 mm/s (160 μin/s) rms,
Noise Floor (4.5
nominal
Hz to 5 kHz)
3/14
330500 Velomitor Piezo-velocity Sensor
Datasheet 141632 Rev. R
Physical
Weight 142 grams (5.0 oz), typical.
2-pin Mil-C-5015
Connector hermetically-sealed, 316L
stainless steel shell.
Recommended
cable length
(assuming
max vibration
of 50g,
frequency 10
kHz, and cable 208 ft (63m)
capacitance
200 pf/m.) For
longer lengths,
contact Bently
Nevada Tech
Support.)
4/14
330500 Velomitor Piezo-velocity Sensor
Datasheet 141632 Rev. R
Compliance and
Certifications
FCC
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
EMC
EMC Directive 2014/30/EU
RoHS
RoHS Directive 2011/65/EU
Maritime
DNV rules for classification – Ships
DNV rules for classification – High
speed and light craft
DNV offshore standards
5/14
330500 Velomitor Piezo-velocity Sensor
Datasheet 141632 Rev. R
330525 Ex ia IIC T4
AEx ia IIC T4
Hazardous Area Approvals Class I, Division 1, Groups A, B, C and D
Class II, Groups E, F, G
Class III
For the detailed listing of country and
product specific approvals, refer to T4 @ -40°C ≤ Ta ≤ 100°C
the Approvals Quick Reference Guide Ex nL IIC T4
(108M1756) available from Bently.com. AEx nA IIC T4
Class I, Div 2, Groups A, B, C, D
Install per dwg 167539
CSA/NRTL/C T4 @ -40°C ≤ Ta ≤ 100°C
Intrinsically Ex nL IIC T4
Safe and Class I, Division 2, Groups A, B, C and D
Non-
AEx nA T4
Incendive
Class I, Division 2, Groups A, B, C and D
Install per drawing 167536
T4 @ -40°C ≤ Ta ≤ +100°C
(-40°F ≤ Ta ≤ +212°F)
330400, Ex ia IIC T4
330425 AEx ia IIC T4
Class I, Div 1 Groups A, B, C and D
Class II, Groups E, F, and G
Class III
T4 @ -40°C ≤ Ta ≤ 100°C
Install per dwg 167538
330500 Ex ia IIC T4
AEx ia IIC T4
Class I, Division 1, Groups A, B, C and D
Class II, Groups E, F, G
Class III
Install per dwg 167537
T4 @ -40°C ≤ Ta ≤ 100°C
Ex nL IIC T4
AEx nA IIC T4
Class I, Div 2, Groups A, B, C, D
Install per dwg 167537
T4 @ -40°C ≤ Ta ≤ 100°C
6/14
330500 Velomitor Piezo-velocity Sensor
Datasheet 141632 Rev. R
ATEX/IECEx
Li= 0
330400, 330425,
330500, 330525
II 1 G
Ex ia IIC T4 Ga
II 3 D
Ex na IIC T4 Gc
Ex tc IIIC T130°C Dc
Entity
T4@ Ta = -55°C to 121°C
Parameters
Ci-10.8nF
Li= 0
7/14
330500 Velomitor Piezo-velocity Sensor
Datasheet 141632 Rev. R
20 ft 6.0 m
Velomitor Piezo-velocity Sensor
25 ft 7.6 m
330500-AA-BB
30 ft 9.0 m
A: Mounting Thread Adaptor Option
33 ft 10.0 m
00 No adapter
50 ft 15.2 m
01 1/2 - 20 UNF
99 ft 30.0 m
02 M8 x 1
6 ft 1.8 m
8 ft 2.4 m
8/14
330500 Velomitor Piezo-velocity Sensor
Datasheet 141632 Rev. R
01 Unthreaded
02 3/4 - 14 NPT
03 1/2 - 14 NPT
04 1/2 - 14 BSP
9/14
330500 Velomitor Piezo-velocity Sensor
Datasheet 141632 Rev. R
10/14
330500 Velomitor Piezo-velocity Sensor
Datasheet 141632 Rev. R
Individual M8 x 1 mounting
89410-01
adapter.
11/14
330500 Velomitor Piezo-velocity Sensor
Datasheet 141632 Rev. R
12/14
330500 Velomitor Piezo-velocity Sensor
Datasheet 141632 Rev. R
13/14
330500 Velomitor Piezo-velocity Sensor
Datasheet 141632 Rev. R
Bently Nevada, Velomitor and Orbit Logo are registered trademarks of Bently Nevada, a Baker Hughes business, in the
United States and other countries. The Baker Hughes logo is a trademark of Baker Hughes Company. All other
product and company names are trademarks of their respective holders. Use of the trademarks does not imply any
affiliation with or endorsement by the respective holders.
Baker Hughes provides this information on an “as is” basis for general information purposes. Baker Hughes does not
make any representation as to the accuracy or completeness of the information and makes no warranties of any
kind, specific, implied or oral, to the fullest extent permissible by law, including those of merchantability and fitness
for a particular purpose or use. Baker Hughes hereby disclaims any and all liability for any direct, indirect,
consequential or special damages, claims for lost profits, or third party claims arising from the use of the
information, whether a claim is asserted in contract, tort, or otherwise. Baker Hughes reserves the right to make
changes in specifications and features shown herein, or discontinue the product described at any time without
notice or obligation. Contact your Baker Hughes representative for the most current information.
The information contained in this document is the property of Baker Hughes and its affiliates; and is subject to
change without prior notice. It is being supplied as a service to our customers and may not be altered or its content
repackaged without the express written consent of Baker Hughes. This product or associated products may be
covered by one or more patents. See Bently.com/legal.
14/14