Ul THRP Improvement Proposalul Scheduler Power Control

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

UL Throughput improvement Proposal

-UL scheduler control power

• Author: g00201526

HUAWEI TECHNOLOGIES CO., LTD.


Content

1 Introduction and Impact

2 Trial Result

3 Summary and Activation

HISILICONTECHNOLOGIES
HUAWEI SEMICONDUCTOR
CO., LTD. Page 2
Introduction
As described in 3GPP 36.213, The setting of the UE Transmit power for the PUSCH transmission in subframe i is
defined by
PPUSCH (i)  min{ PCMAX , PCAL (i)}
PCAL (i)  10 log10 ( M PUSCH (i))  PO_PUSCH ( j )   ( j )  PL   TF (i)  f (i)
CAL: Pusch Power by UE Calculate

 The PUSCH has maximum limit that is PCMAX. Normally, the PCMAX is 23dBm.
 As described in 3GPP 36.213, the UE power headroom PH valid for subframe i is defined by

PH (i)  PCMAX  PCALC (i)


•eNB Constraint PUSCH RB
Num by PH(i);
•Especially PH target=0 for cell
Middle/edge UE;

HISILICONTECHNOLOGIES
HUAWEI SEMICONDUCTOR
CO., LTD. Page 3

You might also like