Abrasive Blasting Inspection Checklist - Rev 00

You might also like

Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 1

SOUTH WEST GAS FIELDS DEVELOPMENT PROJECT, ALGERIA

Realization of Gas Treatment Units (EPC 2 – Phase 1) Document No.:


LTHE/OHSE/HSE/F/28.1
Revision No.: 00
Date: 18.10.2016
ABRASIVE BLASTING INSPECTION CHECKLIST (WEEKLY)

Name of Site/Yard :
Date :
Location :
Supervisor Name :

Sl. Observation
Description Remarks
No (Yes/No/NA)
1 Blasting area covered to prevent the
escape of grit or dust?
2 Is Blasting area barricaded to keep out
personnel not involved in the job?
3 Is operator wearing blasting hood
supplied with clean air, coveralls, haring
protection and footwear?
4 Is blasting gun fitted with Dead-man
switch?
5 Is air compressor located upwind
direction and away from blasting area?
6 All air supply and blasting hoses are
provided with coupling pins and hose
whip checks?
7 Is blast hose free from wear and soft
spots?
8 Are the base materials secured for free
moving or rolling?
9 Abrasive materials are free from
moisture?
10 Operator is trained and competent for
blasting operation?
11 A positive means of communication shall
be established between the operator
and the pot attendant, when working in
confined space?
12 Wastes are collected, stored and
disposed properly?

Inspected By :

Signature :

You might also like