Full Automatic Kammpro Grooving Machine

SUNWELL E500KGM-B

A new concept grooving machine for producing

Kammprofile Gasket.
It has the properties of CNC lathe, and supported by a
special designed fast clamping system. After setting the
data on PLC, the operator only needs to put the
workpiece on the work table, and press “ AUTO” botton,
the machine will complete the whole processing
automatically as per your setting data.

On the interface touch screen, preset the data for

required kammprofile gasket, by the control of PLC, the
variable speed gear will drive the workpiece to rotate at
high speed, at the same time, the servo system move
the cutter to groove the surface of the workpiece.

Special design fast clamping system can suit different

thickness with width of the gasket, don’t need any more
custom made clamp for different sizes.

One normal square shape cutter can machine many

kinds of shapes and sizes of gasket,
Benefit to save you from expensive cost for cutters.

Specification:
Kammprofile surface (Whole range of different sections, Eg. Flat, Convex,
etc.)
Machinable Products Wave tooth gasket;
Inner ring angling;
Guide ring grooving;

Machinable Sections of
KAMMPRO

Thickness 3mm ~ 5mm

ID Min 380mm
OD Max. 3,000mm
Flatness Tolerance 0.05mm
Spindle Speed 0~575 round/min

1 NINGBO SUNWELL SEALING MATERIALS CO.,LTD

Add: No.16 Hengpeng Rd, Henghe Industrial Zone, Cixi, Ningbo, China
www.sunwellseals.com E-mail: sales@sunwellseals.com
 Gasket Linear Speed 0~170 m/minute
Spindle Motor 1.5KW x 2 1/5 gear reducer motor
Spindle Motor Controller 4.0G frequency transformer
XY Axis Servo Motor MS-60ST-MO1330B-20P4 x 2
Planetary Gear Reducer 60ZDF10-400T3 x 2
XY Axis Servo Motor Controller DS2-20P4-BS x 2
PLC XCC-32T-E x 1 XCL-E8X8YT x 1 XCT-E8YT x 1
Touch Screen THA62-MT
Total Power 5KW
Power Supply (As per name plate) 380V 3P4W or 220V 3P3V, 50~60HZ
Air Compressor 0.6~0.8MPa
Production Rate 120S
Main Machine Packaging Size 1370 x 1050 x 1950mm
Whole Machine Expand Size 3880 x 3000 x 1950mm
Net Weight 1,050 KGS

Note:
1. Unpack the machine, check the machine, spare parts and tools according to the packing list, to confirm no
damage during the transportation;
2. Arrange the professional workers operate the machine;
3. Connect the air compressor of 0.6~0.8Mpa (SUNWELL recommend air compressor by 0.6m3/min)
4. Connect the machine supply of 380V, 3 phase 4 wires ( or 220 V, 3 phases 3 wires as indicated on the
nameplate), please read the machine electric name plate before connect to power supply, or enquire dealer or
SUNWELL;
5. Must comply with your local law of safe using electricity, and ensure all the connections of power supply are
firm.

2 NINGBO SUNWELL SEALING MATERIALS CO.,LTD

Add: No.16 Hengpeng Rd, Henghe Industrial Zone, Cixi, Ningbo, China
www.sunwellseals.com E-mail: sales@sunwellseals.com