Professional Documents
Culture Documents
6fm200se X PDF
6fm200se X PDF
com
6FM200SE-X
Sealed Lead Acid Battery
12V 200Ah(10hr)
The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid
electrolyte is absorbed by separators and plates and thus immobilized. Should the
battery be accidentally overcharged producing hydrogen and oxygen, special one-
way valves allow the gases to escape thus avoiding excessive pressure build-up.
Otherwise, the battery is completely sealed and is, therefore, maintenance-free,
leak proof and usable in any position.
Battery Construction
Component Positive plate Negative plate Container Cover Safety valve Terminal Separator Electrolyte
Raw material Lead dioxide Lead ABS ABS Rubber Copper Fiberglass Sulfuric acid
General Features
Performance Characteristics
´ Absorbent Glass Mat (AGM) technology
for efficient gas recombination of up to Nominal Voltage 12V
99% and freedom from electrolyte Number of cell 6
maintenance or water adding. Design Life 10 years
´ Not restricted for air transport-complies
Nominal Capacity 77oF(25oC)
with IATA/ICAO Special Provision A67.
´ UL-recognized component. 10 hour rate (20.0A, 10.8V) 200Ah
´ Can be mounted in any orientation. 5 hour rate (34.7A, 10.5V) 173.5Ah
´ Computer designed lead, calcium tin alloy 1 hour rate (129A, 9.6V) 129Ah
grid for high power density. Internal Resistance
´ Long service life, float or cyclic Fully Charged battery 77oF(25oC) 3.5mOhms
applications. Self-Discharge
´ Maintenance-free operation. 3% of capacity declined per month at 20oC(average)
´ Low self discharge.
Operating Temperature Range
Discharge -20~60oC
Dimensions and Weight Charge -10~60oC
Storage -20~60oC
Length(mm / inch) 522 / 20.55
Max. Discharge Current 77oF(25oC) 1000A(5s)
Width(mm / inch) 238 / 9.37
Height(mm / inch) 218 / 8.58 Short Circuit Current 3300A
Total Height(mm / inch) 223 / 8.78 Charge Methods: Constant Voltage Charge 77oF(25oC)
Approx. Weight(Kg / lbs) 59.1 / 130 Cycle use 14.4-14.7V
Maximum charging current 60A
Temperature compensation -30mV/oC
Standby use 13.6-13.8V
Temperature compensation -20mV/oC
page1 of 2
www.allsai.com 6FM200SE-X 12V 200Ah
O
Discharge characteristic (25 C)
Constant voltage charging
characteristic (0.25CA,25 oC)
13.0
(%) (XCA) (V)
12.0 140
120 0.25
11.0 15.0 ÝØßÎÙÛÜ ÊÑÔËÓÛ
100 0.20
10.0
20.4A 10.55A 14.0 CHARGE VOLTAGE
80
0.15
9.0 13.0
60
0.10
8.0 40 12.0
20 0.05
11.0 CHARGING CURRENT
0
0 1 2 3 5 10 20 30 60 2 3 5 10 îð 30 0 0
min h 0 2 4 6 8 10 12 14 16 18 20
Charging time (hours)
100
90
15.6 10.4 7.8 5.2 2.6
80
15.0 10.0 7.5 5.0 2.5
-10 0 10 20 30 40 50 60 40
0 2 4 6 8 10 12 14 16 18 20
Ambient temperature( oC) Storage time: months
100
100
80
80
60
60 30% D epth of di scharge
40 40
20 20
100
10
80
60
5
40
20
0 0
10 20 30 40 50
-20 -10 0 10 20 30 40 50(o C)
Temperature( oC)
Page 2 of 2