Professional Documents
Culture Documents
En Remak X Ig 2021
En Remak X Ig 2021
En Remak X Ig 2021
The new AHU Remak X series can fit into every building
– thanks to 25 available cross-sections with the air-flow
from 1.000 to 30.000 m3/h, the dismountable frameless
construction and the custom made length.
THEY CAN FIT INTO ANY BUILDING
unit size
BLOCKS ASSEMBLY
SINGLE-STEP LARGE BLOCKS IN THE INACCESSIBLE
ASSEMBLY HANDLING PLACES
Elastic connections, dampers, The transport blocks are placed The self-aligning connections
inlet and outlet louvers as well on frames with handling holes on can be relocated from
as seals between the individual all four sides enabling loading by the unit outside to inside,
transport blocks are factory- a forklift truck from all directions. which allows to place the
installed, which significantly They are also equipped with individual blocks right next
reduces installation time. circular openings either for to the machine- room wall
handling by crane or manual and consequently to connect
manipulation using bars, as well the blocks. Therefore, there
as with galvanized steel transport is no need to manipulate
legs replacing the pallets for the entire assembled unit
transport by a hand pallet truck. or help yourself with non-
Thanks to pallet omitting there is original couplings with the
no risk of getting moisturized and risk of paint damage and the
no need of pallet disposal. leakage between the blocks.
THEY PROVIDE A LOT OF PRACTICAL DETAILS
Door locks allow height, The service side casing panels The casing is equipped with
longitudinal and closing force are fitted using metric screws factory-installed PG grommets
adjustment all in the range of which allows repeatable for control cables as well
up to 4 mm to compensate disassembly. as with hose nipples for
the floor unevenness. connecting the airflow meter
The easy door closing is also to the fans and measuring
aided by the high mechanical the filter’s pressure loss.
stability of the casing and Therefore, there is no need to
massive base frame. drill holes additionally into the
panels.
THEY LOOK GOOD AND SAVE ENERGY
THEY PROVIDE A LOT OF PRACTICAL DETAILS
CONDENSATE COLLECTION
SERVICE IN CONFINED REPLACEMENT OF AND DRAINAGE UNDER
MACHINE-ROOMS OVERSIZED FILTERS ALL CIRCUMSTANCES
Thanks to the multifunctional In case of such filter module The DN 40 condensate pan
locks, the door can be the particular filter cells can side connector practically
opened on both sides and be replaced in parts , which is never clogs and there is no
can be completely removed. highly practical when it comes risk of damage when handling
This is useful, for example, to high two -storey units or the unit. The 3D sloped
in installations where there confined machine-rooms. pan empties quickly and
is not enough free space in The modules have standard completely, the edge of the
front of the unit. dimensions, which simplifies pan prevents overflow even at
the purchase and storage of high air speeds and pressures.
cells replacement. A system of safety drip ledges
directs the condensate drain
towards the pan even in case
of extreme humidity.
THEY PROVIDE A LOT OF PRACTICAL DETAILS
olivky?
ALMOST
FULL-FLEDGED ONE PAGE INDESTRUCTIBLE
HINGES SPECIFICATIONS DESIGN