Professional Documents
Culture Documents
Muntajat Data Sheet (Booklet)
Muntajat Data Sheet (Booklet)
Muntajat Data Sheet (Booklet)
H I G H D E N S I T Y P O LY E T H Y L E N E
(HDPE)
03| INTRODUCTION
19|MARLEX® HDPE
www.muntajat.qa 01
Aligned with Qatar National
Vision 2030’s aim to develop
a competitive and diversified
economy, Muntajat serves as a
gateway for the State of Qatar’s
chemical and petrochemical
industries, by consolidating
marketing and distribution efforts
into a single entity to meet the
needs of customers worldwide.
02
INTRODUCTION
03
04
New look, same quality products
New bag designs released
Low Density Polyethylene Linear Low Density Polyethylene
07
GRADE FB3003 FE3000
MFI (dg/min)
(target, ASTM D1238) 0.30 0.30
Density
(target, ASTM D1505/D792*) 0.920 0.923*
Slip (Eurucamide)
(target, ppm) No No
Antiblock
(target, ppm) No No
Antioxidants No No
Applications Heavy duty bags, industrial shrink Heavy duty bags, industrial
film, shrink film for pallets shrink, shrink film, construction film,
construction film, agricultural agricultural film
film, drip irrigation pipe, small
blow moulded bottles
08
FB5026 FE8000 FE8004
300 No 300
No No No
No No No
Milk bags (pouches), shopping Shrink wrap film for light and Shrink wrap film for light and
bags, medium duty carrier bags, medium duties, shopping bags, medium duties, shopping bags,
industrial liners, shrink wrap for lamination film bakery bags, milk pouches,
light and medium duty lamination film
Lotrène® FB5026 is mainly Films produced with Lotrène® Films produced with Lotrène®
recommended for medium duty FE8000 are sufficiently rigid for FE8004 are sufficiently rigid for
film applications. It contains automatic packaging machines, automatic packaging machines,
additive that gives good slip suitable for shrink wrapping and suitable for shrink wrapping and
properties. have good optical properties. have good optical properties.
Films produced with Lotrène® Lotrène® FE8000 mainly Lotrène® FE8004 is mainly
FB5026 are strong, sufficiently rigid recommended for light and recommended for light and
for automatic packaging machines, medium duty film applications medium duty film applications
suitable for shrink wrapping and with good optical properties and with good optical properties and
have good dimensional stability. medium rigidity. medium rigidity.
09
GRADE FD0270 FD0274
MFI (dg/min)
(target, ASTM D1238) 2.4 2.4
Density
(target, ASTM D1505/D792*) 0.923* 0.923*
Slip (Eurucamide)
(target, ppm) No 600
Antiblock
(target, ppm) No 900
Antioxidants No Yes
Applications High clarity bags, thin shrink film, Thin transparency film, thin shrink
lamination film, foamed products. film, laundry film, foam products,
food packaging, deep freeze,
lamination film.
10
FD0374 FD0474
3.5 4.0
0.923 0.923
Tubular Tubular
600 600
900 900
Yes Yes
Lotrène® FD0374 provides excellent clarity, gloss The molecular structure of Lotrène® FD0474
and haze. It also shows excellent processability and provides excellent clarity, high gloss
draw down. and low haze films.
Lotrène® FD0374 is mainly recommended for the This structure also leads to excellent processability.
extrusion of very thin film for light duty applications. Lotrène® FD0474 is mainly recommended for the
extrusion of very high clarity blown and cast films.
11
GRADE LA0710
MFI (dg/min)
(target, ASTM D1238) 8
Density
(target, ASTM D1505/D792*) 0.918
Process Autoclave
Antiblock
(target, ppm) No
Antioxidants No
Applications
Coating and /or lamination of:
paper, paper board, aluminum,
cellophane film, photographic
paper, polymer film, tarpaulin,
paper / aluminum, pe film /
aluminum.
Product Description
The structure of Lotrène® LA0710 allows it to be
used for thin gauge coating at very high speeds
onto various substrates. Lotrène® LA0710 has good
mechanical properties, low neck-in and excellent
heat sealability. It has also a good adhesion to both
porous and non-porous substrates.
Lotrène® LA0710 is mainly recommended for the
extrusion coating at high speed. It contains no
additives.
12
MG20 MG70
20 70
0.918 0.918
Autoclave Autoclave
No No
No No
No No
Lotrène® MG20 is an injection moulding grade Lotrène® MG70 is an injection moulding grade
mainly recommended for the injection moulding of mainly recommended for the injection of thin and
thin and flexible items. The high melt flow index of flexible items and the preparation of masterbatches.
Lotrène® MG20 leads to good flow properties. It is The high melt flow index of Lotrène® MG70 leads
ideal for filling the cavities of the complex moulds to excellent flowability and processability. The items
with high surface gloss. produced from this grade possess high flexibility and
glossy surface.
13
14
Muntajat is the sole distributor of
Linear Low Density Polyethylene
(LLDPE) produced in Qatar by Qatofin.
Antiblock 0 3200
(target, ppm)
Product Description Lotrène® Q1018 Series are Linear Low Density Polyethylene resins produced
in a gas phase reactor using Butene (C4) co-monomer. They are designed for
blown film applications and can be used in pure form as well as blended with
other PE resins, such as LDPE or HDPE and mPE resins for mono extrusion or
co-extrusion process to modify film properties.
16
Q2018N Q2018H Q2018C
0 1500 0
0 3200 0
Consumer, industrial, food or hygiene packaging such as freezer film, Cast stretch film for melt index 2.0
bread bags, shoppers and bags as well as lamination film and market. Consumer, industrial, food
multilayer packaging film. or hygiene packaging as well as
non-packaging applications like
agricultural films
e.g. mulching films.
Lotrène® Q2018 Series are Linear Low Density Polyethylene resins produced Lotrène® Q2018C is a Linear
in a gas phase reactor using Butene (C4) co-monomer. They are designed for Low Density Polyethylene resins
film applications and can be used in pure form as well as blended with other produced in a gas phase reactor
PE resins, such as LDPE or HDPE and mPE resins for mono extrusion or co- using Butene (C4) co-monomer.
extrusion process to modify film properties. Lotrène® Q2018C can be
processed at optimal output rates
with moderate extrusion pressure,
good web stability and gauge
control on cast film machines
designed for LLDPE.
Lotrène® Q2018C can
advantageously be blended with
LDPE or other PE resins used in cast
film mono extrusion or co-extrusion
to improve film properties.
Operated by QAPCO
17
18
Muntajat is the sole distributor of Qatar Chemical Company Ltd.
High Density Polyethylene (HDPE) (Q-Chem) is a Qatari company
and Medium Density Polyethylene owned by Mesaieed Petrochemical
(MDPE) produced by Q-Chem and Holding Company Q.S.C. (MPHC)
Q-Chem II in Qatar. (49%), Chevron Phillips Chemical
International Qatar Holdings LLC
These polyethylene resins are (Chevron Phillips Chemical Qatar)
produced in Phillips Slurry reactors, (49%), and Qatar Petroleum (QP) (2%).
using hexene as comonomer.
Muntajat markets a wide range of The Q-Chem facility is a world-class
MDPE/HDPE grades suitable to integrated petrochemical plant capable
various thermoplastic techniques: of producing high-density and medium
blown film, blow molding, pipe, density polyethylene (HDPE and
geomembranes. MDPE), 1-Hexene and other products.
19
20
BLOWN FILM PRODUCTS
HLMI, (dg/min), 15 15
(target, ASTM D1238)
21
BLOW MOULDING PRODUCTS
Density,
0.964 0.955
(target, ASTM D1505
MI-2, (dg/min),
0.7 0.35
(target, ASTM D1238)
HLMI, (dg/min), 58 33
(target, ASTM D1238)
22
HHM 5202BN HXM 50100 HXM TR-571
33 10 2.5
Containers for packaging Shipping containers (up to Large. Part blow moulding
food, household 210L), large blow moulded drums
chemicals (bleaches, parts, sheets
detergents, etc)
Oil bottles, household & Large blow-moulded and Jerrycans open top drums 220L
industrial chemical thermoformed parts, 220 L L-ring drums
containers, toys & personal shipping containers,
care products, bleach & gasoline tanks, agricultural
detergent bottles chemical tanks, pallets,
automotive dunnage,
truck bedliners, boats
23
PIPE
Density, 0.938
(target, ASTM D1505)
HLMI, (dg/min), 15
(target, ASTM D1238)
24
GEOMEMBRANE APPLICATIONS
MI-2, (dg/min),
(target, ASTM D1238) 0,11
HLMI, (dg/min), 11 21
(target, ASTM D1238)
25
26
STORAGE, SAFETY AND
FOOD CONTACT
TECHNICAL DISCLAIMER
27
Global Reach
28
29
GLOBAL NETWORK CONTACTS
Netherlands (HQ)
WTC The Hague, 19th Floor, Toren E, Prinses Margrietplantsoen 78-A, 2595 BR Den
Haag, The Hague, The Netherlands
Tel.: +31 70 2055630
Australia
Level 6, 330 Collins St, Melbourne, Australia
Tel.: +61 3 9008 5603
China - Guangzhou:
City Development Plaza 25F, No. 189 West Tiyu Road,
Tianhe District, Guangzhou 510620, P.R. China
Tel.: +86 20 8718 1250
China - Shanghai:
Room 1904, South Tower, Hong Kong Plaza, 283 Huaihai Middle Road, Shanghai,
China
Tel.: +86 21 5116 0583
Dubai
22nd Floor, The Citadel Tower, Business Bay Area, Dubai, U.A.E.
Tel.: +971 4 4534980
Egypt
10 El Nozha St. - Ard Al Golf, Heliopolis, Cairo, Egypt
Tel.: +2 02 26901223
Jordan
Mecca St., AL-Husseini Complex, Building No.152 , 5th Floor,
Office No.502 , Amman - Jordan
Tel.: +962 6 5522676/5522678
India
914 , 9th Floor The Capital Building, Bandra Kurla Complex ,
Bandra East, Mumbai, Maharashtra, India, Pin Code – 400051
Tel.: +91 22 42465700
Indonesia
World Trade Centre 2, 19th Floor, Jl. Jend. Sudirman Kav. 29-31,
Jakarta 12920 - Indonesia
Tel.: +6221 30000 485 / 486 / 488
Malaysia
Lot 17-04, Level 17, Menara HLA,
No. 3 Jalan Kia Peng, Kuala Lumpur
Tel.: +603-21667122
Morocco
8 rue Ali Abderrazak, Residence, PLEIN CIEL. Casablanca
Tel.: +212 522 23 38 86
Pakistan
2nd Floor, Bahria Complex II, M. T. Khan Road, Karachi, Pakistan
Tel.: +9221 35611595-7 Ext 106
Philippines
17-D Petron Mega Plaza Senator, Gil Puyat, Makati City
Tel.: +632 856-9836 / 7 / 8
South Africa
204, The Gate House, Century Way, Century City, Cape Town, South Africa
Tel.: +27 21 55 22 11 7
Sri Lanka
Level 9 unit LO9/ET/01, World Trade Center, Echelon Square,
Colombo 1, Sri Lanka
Tel.: +94 011 2445777
Thailand
9th floor, Unit 904, 208 Wireless Road, Lumpini, Patumwan,
Bangkok 10330, Thailand
Tel.: +662 651 5111
Turkey
Buyukdere Cad. Noramin Is Merkezi NO:237 A111 Maslak Sariyer - Istanbul
Tel.: +902 1 2329 8250