Professional Documents
Culture Documents
SS Materials
SS Materials
Introduction
ASTM standards A297, A351, A743, A744 and A890 specify castings for corrosion and heat-resisting service. The grade designations used in these standards
As an alternative to scanning down the list try the 'find' facility on your keyboard, using the 'Ctrl' and 'F' keys together. Type in the term you are looking for in the
The data given is not intended to replace that shown in individual standards to which reference should always be made.
ACI No UNS No C Si Mn P S Cr Mo Ni
CA6N - 0.06 1 0.5 0.02 0.02 10.5/12.5 - 6.0/8.0
CA28MW
V J91422 0.20/0.28 1 0.50/1.00 0.03 0.03 11.0/12.5 0.90/1.25 0.50/1.00
CA40 J91153 0.20/0.40 1.5 1 0.04 0.04 11.5/14.0 0.5 1
CA40F J91154 0.20/0.40 1.5 1 0.04 0.20/0.40 11.5/14.0 0.5 1
CB6 J91804 0.06 1 1 0.04 0.03 15.5/17.5 0.5 3.5/5.5
CF10SMn
CF10MC - 0.1 1.5 1.5 0.04 0.04 15.0/18.0 1.75/2.25 13.0/16.0
N J92972 0.1 3.50/4.50 7.00/9.00 0.06 0.03 16.0/18.0 - 8.0/9.0
CF16F J92701 0.16 2 1.5 0.17 0.04 18.0/21.0 1.5 9.0/12.0
CF16FA - 0.16 2 1.5 0.04 0.20/0.40 18.0/21.0 0.40/0.80 9.0/12.0
20.50/23.
CG6MMN J93790 0.06 1 4.00/6.00 0.04 0.03 50 1.50/3.00 11.5/13.5
CG3M J92999 0.03 1.5 1.5 0.04 0.04 18.0/21.0 3.0/4.0 9.0/13.0
CG8M J93000 0.08 1.5 1.5 0.04 0.04 18.0/21.0 3.0/4.0 9.0/13.0
CG12 J93001 0.12 2 1.5 0.04 0.04 20.0/23.0 - 10.0/13.0
CH8 J93400 0.08 1.5 1.5 0.04 0.04 22.0/26.0 0.5 12.0/15.0
CH10 J93401 0.1 2 1.5 0.04 0.04 22.0/26.0 - 12.0/15.0
CH20 J93402 0.2 2 1.5 0.04 2 22.0/26.0 - 12.0/15.0
CK20 J94202 0.2 2 2 0.04 0.04 23.0/27.0 - 15.0/19.0
CK3MCu
N J93254 0.025 1 1.2 0.045 0.01 19.5/20.5 6.0/7.0 17.5/19.5
CK35MN - 0.035 1 2 0.035 0.02 22.0/24.0 6.0/6.8 20.0/22.0
CN3M J94652 0.03 1 2 0.03 0.03 20.0/22.0 4.5/5.5 23.0/27.0
CN3MN J94651 0.03 1 2 0.04 0.01 20.0/22.0 6.0/7.0 23.5/25.5
CN7M N08007 0.07 1.5 1.5 0.04 0.04 19.0/22.0 2.0/3.0 27.5/30.5
CN7MS J94650 0.07 1.5 1.5 0.04 0.04 19.0/22.0 2.0/3.0 27.5/30.5
CT15C N08151 0.05/0.15 0.50/1.50 0.15/1.50 0.03 0.03 19.0/21.0 - 31.0/34.0
ACI No UNS No C Si Mn P S Cr Mo Ni
HC - 0.5 2 1 0.04 0.04 26.0/30.0 0.5 4.0/7.0
HD - 0.5 2 1.5 0.04 0.04 26.0/30.0 0.5 4
HE - 0.20/0.50 2 2 0.04 0.04 26.0/30.0 0.5 8.0/11.0
HF - 0.20/0.40 2 2 0.04 0.04` 18.0/23.0 0.5 8.0/12.0
HH - 0.20/0.50 2 2 0.04 0.04 24.0/28.0 0.5 11.0/14.0
HI - 0.20/0.50 2 2 0.04 0.04 26.0/30.0 0.5 14.0/18.0
HK - 0.20/0.60 2 2 0.04 0.04 24.0/28.0 0.5 18.0/22.0
HK30 J94203 0.25/0.35 1.75 1.5 0.04 0.04 23.0/27.0 0.5 19.0/22.0
HK40 J94204 0.35/0.45 1.75 1.5 0.04 0.04 23.0/27.0 0.5 19.0/22.0
HL - 0.20/0.60 2 2 0.04 0.04 28.0/32.0 0.5 18.0/22.0
HN - 0.20/0.50 2 2 0.04 0.04 19.0/23.0 0.5 23.0/27.0
HP - 0.35/0.75 2.5 2 0.04 0.04 24/28 0.5 33/37
HT - 0.35/0.75 2.5 2 0.4 0.4 15.0/19.0 0.5 33.0/37.0
HT30 N08030 0.25/0.35 2.5 2 0.04 0.04 13.0/17.0 0.5 33.0/37.0
HU - 0.35/0.75 2.5 2 0.4 0.4 17.0/21.0 0.5 37.0/41.0
HW - 0.35/0.75 2.5 2 0.4 0.4 10.0/14.0 0.5 58.0/62.0
HX - 0.35/0.75 2.5 2 0.4 0.4 15.0/19.0 0.5 64.0/68.0
ng steel castings grades
nations used in these standards are those originally developed by the ACI, the Alloy Casting Institute. (Now the Steel Founder's Society of America). These standards include th
he term you are looking for in the dialog box that then appears.
Wrought
N Cu Nb Others Grade
- - - - -
- - - - -
- - - - 410
- - - - -
W
0.90/1.25;
V
- - - 0.20/0.30 -
- - - - 420
- - - - -
- - - - -
0.90/1.20
optional - - - -
0.22/0.33 1.40/1.90 - - 1C
0.10/0.30 1 - - 2205 (4A)
Zeron 100
0.20/0.30 0.5/1.0 - W 0.5/1.0 (6A)
- 2.75/3.25 - - 1A
0.10/0.25 2.7/3.3 - - 1B
0.15/0.25 - - - 3A
0.08/0.20 - - - -
Alloy 958
0.10/0.30 - - - (5A)
- - - - -
Escoloy
0.10/0.30 - - - (2A)
- - - - 304L
- - - - 304
- - 8x C/1.0 - 347
- - - - 302
- - - - 316L
0.10/0.20 - - - 316LN
- - - - 316
- - - - -
- - - - -
- - - - -
- - 10xC/1.20 - -
0.08/0.18 - - - -
Se
- - - 0.20/0.35 303Se
- - - - -
V
0.20/0.40 - 0.10/0.30 0.10/0.30 -
- - - - 317L
- - - - 317
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -