Msds-Sodium Butyrate

You might also like

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 5

Material Safety Data Sheet

1. Identification of the substance

Product name: SODIUM BUTYRATE


Business area: PT. Baahirah Medica Farma applied science
Product line: not applicable
Sodium butyrate CAS No.: 156-54-7
Instrument type: not applicable
Supplier: PT. Baahirah Medica Farma
Add: Ruko Golden Road Blok C 27 No. 50 ITC BSD, Desa/Kelurahan Lengkong Gudang,
Kec. Serpong, Kota Tangerang Selatan, Provinsi Banten, Indonesia
Tel: +62 81222222138

2. Composition of ingredients

Formula: C4H7O2Na

Molecular Weight: 110.09 g/mol

Component Weight (%) OSHA PEL OSHA STEL ACGIH TLV ACGIH STEL

Sodium butyrate 100 NA NA NA NA

3. Hazards identification

Emergency overview
NFPA Ratings: health=0 flammability=0 reactivity=0
Special definitions: A=Allergen CA=Carcinogen CO=Corrosive F=Flammable H=Harmful
Ox=Oxidizer PB=Potential biohazard R=Reproductive S=Sensitizer T=Toxic T+ =Heavy Toxic
W=Water reactive

4. Principle routes of exposure

Principle routes of exposure: ingestion, skin and/or eye contact


Inhalation: none
Ingestion: ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea
Skin contact: contact with skin may cause irritation
Eye contact: contact with eyes may cause irritation
Sensitization: none
Medical conditions aggravated by exposure: none known
Additional information: none
Target organ effects: none

5. First aid measures


General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a
physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a
physician

6. Fire fighting measures

6.1 Extinguishing media


Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
6.2 Special hazards arising from the substance or mixture
Carbon oxides, Sodium oxides
6.3 Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
6.4 Further information
no data available

7. Accidental release measures


7.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas.
Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
7.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
7.3 Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable,
closed
containers for disposal.
7.4 Reference to other sections
For disposal see section 13.

8. Handling and storage


8.1 Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
8.2 Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
hygroscopic
8.3 Specific end uses
no data available

9. Exposure controls

Engineering measures: not applicable


Respiratory protection: respiratory protection is not required under normal use of this product
Hand protection: wear appropriate protective gloves to prevent skin contact
Skin and body protection: wear appropriate body protection to prevent skin contact
Eye protection: wear appropriate eye protection to prevent eye contact
Hygiene measures: avoid contact with skin, eye and clothing

10. Physical and chemical properties

Color: dark yellow or brown


Odor: weak oder
Physical state: powder
Melting point/freezing point: not applicable
Solubility in water: depends on the solubility of the coating material

11. Stability and reactivity

11.1 Reactivity
no data available
11.2 Chemical stability
stable under recommended storage conditions
11.3 Possibility of hazardous reactions
no data available
11.4 Conditions to avoid
no data available
11.5 Incompatible materials
Strong oxidizing agents

12. Toxicological information


EPA-IRIS oral EPA-IRIS inhalation
NIOSH selected LD50s
component reference dose reference concentration
and LC50s
(Rfd) information (Rfc) information

Sodium butyrate none none > 15 g/kg oral LD50 rats

Inhalation: no data available


Skin: no data available
Oral: > 15 g/kg acute oral LD50 rats
Mutagenic effects: no data available
Carcinogenic effects: no data available

13. Ecological information

Bioaccumulation: not determined


Aquatic toxicity: not applicable
Eco-toxicity effects: not applicable

14. Disposal considerations

Waste from residues/unused products: waste disposal must be in accordance with appropriate
federal, state, and local regulations. This product, if unaltered by use, may be disposed of by
treatment at advised by your local hazardous waste regulation authority.

15. Transport information

Non-Hazardous for air, sea and road freight.Keep product in closed container.Avoid high
temperature ,evaporation, ignition sources(heat,open flame,spark) or incompatible materials.

16. Other information

Issued/valid data:October 10,2022


Disclaimer:The information provided in the Safety Data Sheet is correct at the date of issued(valid
date).However, along with the development of science and technology,this information may be
mistaken at the later of time.
Reason for revision: not applicable
References: none
Additional advice: none
Prepared by: technical centre, PT. Baahirah Medica Farma
This information data and recommendations contained here are based upon information believed by PT.
Baahirah Medica Farma (BMF), after reasonable investigation and research, to be accurate, however, BMF
doesn’t warrant the accuracy of this information. All materials and mixtures may present unknown hazards and
should be used with caution. When necessary or appropriate, independent opinions regarding the risk of handling
or exposure should be obtained from trained professionals. BMF disclaims any warranty against patent
infringement and the implied warranties of merchantability and fitness for a particular purpose. Customer’s sole
and exclusive remedy shall be replacement of the product or return of the product and refund of purchase price,
at BMF’s option, in no case shall BMF be liable for incidental or consequential damages, including lost profits.

You might also like