Professional Documents
Culture Documents
Sa14 Uk
Sa14 Uk
Application: Function:
TIMCO End Stop switch SA14 is used for When the contact FORWARD or RETURN is
control of DC-actuators and DC-motors in e.g. closed, the motor will run and when the contact
lifting devices, agricultural machinery and is released, the motor will stop.
hospital beds. If the motor is blocked or encounters a stop,
the current in the motor will increase and the
End Stop switch disconnects the motor.
Description: The current-stop is adjusted on the trim
potentiometer.
The End Stop switch will stop the motor or the
actuator automatically when it encounters a
stop or load exceeding the value preset on the
potentiometer.
Setting of
current-stop
(Dimensionen in mm)
Technical data:
T:\Produkter\Industri\Brochure
SA14 Eng 14.11.03 www.timco.dk