Professional Documents
Culture Documents
CSL Elite RP1X QG ENvaR5x5c5iXCMw PDF
CSL Elite RP1X QG ENvaR5x5c5iXCMw PDF
3 3
Turn the steering wheel up side down to see the bottom Store fixing screw and hex key safely for later
side of the clamp ring to follow next step below. use.
4
Push steering wheel
until the screw hole EXCHANGEABLE BUTTON CAPS
matches with hole on
wheel base axle.
To detach the button caps, simply pull them out by hand.
They can be replaced with the included set of racing style
5 button caps for CSL Elite Steering Wheel P1.
QuickGuide
Place and tighten the fixing screw to
fix the clamp ring mechanism.
Use only the hex key
from box contents. EN
Manufactured by
To switch between modes simultaneously press and hold the To enter shifter calibration mode, simultaneously press the
Button Button no. PC Xbox One
two buttons + , highlighted below, for one second. two buttons + , highlighted below.
LT 8 LT 100% (brake) The wheel base LED indicates the active mode: For the detailed process read shifter manual.
RT 7 RT 100% (accelerator)
- Green means Xbox One mode
- Red means PC mode
LSB 12 LSB -> LB (shift down) - Blue means PS4TM mode*
RSB 11 RSB -> RB (shift up) - Purple means CSW V2
compatibility mode*
10 MENU
9 VIEW
A 2 A
B 3 B
* not applicable for every Fanatec wheel
X 1 X base, please check the individual user
manuals of your Fanatec wheel base.
Y 4 Y
6 LB
Shifter Paddle L
5 RB
Shifter Paddle R
CENTER CALIBRATION TUNING OPTIONS
D-pad press 26 Horn
D-pad right D-pad right D-pad right If a center calibration is needed (e. g. after firmware update of To enter tuning menu press button . To navigate inside
wheel base) you need to enter the tuning menu by pressing the menu, use the D-pad stick:
D-pad up D-pad up D-pad up
button as shown on the graphic “S_...” will appear on - Press D-pad up or down to access 5 setups
D-pad down D-pad down D-pad down
the display. Now turn the wheel to its center position and - Press D-pad right or left to go through the options
25 Guide and press or hold it up or down to change option values
then press two buttons + at the same time to calibrate
the wheel center.
2
S_...
11
9 1
6 5
12 4 1
3
8 2