Professional Documents
Culture Documents
Ce3020 Tutorial05 2023
Ce3020 Tutorial05 2023
Ce3020 Tutorial05 2023
Date: 03-03-2023
Tutorial-04 Time: 11:00-12:00
1. Determine the capacity of the joint shown in Fig., if 20mm HSFG bolts are used on clean mill
scale surface.
2. A tension member (Tie) of a roof truss consisting of an angle section ISA 90×60×8 in Fe410
grade steel is to be connected in the field to a 10mm gusset plate through bigger leg using fillet
welds. Design a moment-free welded connection.
3. Determine the design tensile strength of plate (160×8mm) connected to 10mm thick gusset using
16mm bolts, as shown in fig., if the yield and the ultimate stress of the steel used are 250Mpa and
410Mpa respectively.