Professional Documents
Culture Documents
GCSVWN
GCSVWN
Ceiling Mount
Speakers and
Speaker-Strobes
Genesis LED GCS Series
S218,
S5389
73201657:0516
Overview
Genesis LED GCS Series speakers and speaker-strobes new LED technology. In fact, GCS strobes can be mixed on the
combine high performance output with a sleek low profile same circuit and used in the same field of view as Xenon-based
design and energy-efficient technology that makes them less strobes. This makes Genesis LED GCS Series ideal for new
expensive to install and operate. High performance LEDs require installations and retrofits alike.
fewer power supplies, backup power, and batteries. These
Field-configurable sound output levels provide the flexibility
new appliances are designed with energy-efficiency, and life
modern life safety projects demand, while the Genesis LED
safety in mind.
control protocol keeps multiple strobes on compatible NAC
Speakers feature selectable wattage taps, while speaker- circuits synchronized to well within NFPA 72 requirements.
strobes allow for both wattage and light output levels to be They also meet NFPA and UL 520Hz requirements for sleeping
configured in the field. Both settings remain clearly visible areas making them ideal for new construction or retrofits.
— even after final installation. Speakers are also capable of
GCS Series speakers produce crisp, clear voice audio output
both 25V and 70V and voltage in a single model with a field
that is highly intelligible over large areas. In an emergency,
selectable switch. All this flexibility allows devices to be easily
intelligibility is critical to life safety. Understanding the content of
fine-tuned to exactly how they’re needed to perform. All Genesis
the message is as important as knowing there is an emergency.
speakers include a DC blocking capacitor to allow electrical
Intelligibility is measured in Speech Transmission Index and
supervision of the audio distribution circuit.
anything above .76 is considered excellent. GCS Series
Genesis LED GCS Series uses high efficiency optics, combined speakers deliver audio with an STI of .81 ensuring the message
with patented electronics, to deliver a highly controlled and is clear.
efficiently focused light distribution pattern in exchange for lower
Serviceability is another area where GCS Series appliances
current requirements. Strobes feature field-selectable 15, 30,75,
shine. The universal room side wiring plate allows for pre-
or 115 cd light output.
installation and electrical wiring as well as checking continuity with
Compared with Xenon-type strobes, Genesis LED GCS Series the included diagnostics check bar. GCS Series devices can then
appliances offer greatly reduced current draw which provides be easily snapped into place with the confidence of knowing the
benefits in longer circuit lengths, more devices per circuit, smaller wiring is correct. The innovative under-cover diagnostic test points
wire gauge and reduced power supply quantities for an installation. provide easy access to device circuit testing while mounted.
They are also backwards compatible with legacy strobes, so
there’s no need to replace all your existing devices to upgrade to
Removing Cover
Wiring
Removing Device
Speaker Speaker
Circuit In Circuit Out
Strobe Strobe
Circuit In Circuit Out
Shorting Clip
Test points indicated above are used to validate the Notification Appliance Circuit and verify device function.
Sound Output
Sound pattern (ULC)
Axis Angle Change in output
120° and 60° –3 dBA
Horizontal
140° and 40° –6 dBA
Field Configuration Vertical
120° and 60° –3 dBA
145° and 40° –6 dBA
Genesis LED speakers are capable of both 25V and 70V operation
depending on the system, The voltage is set via a switch under
the cover. Speakers also may be set for ¼, ½, 1, or 2 watt
operation. The wattage setting is visible through a small window
on the side of the device and is changed by simply sliding the
switch under the cover until the desired setting appears in the
Light Distribution
window. The speaker does not have to be removed to change
the wattage, only the cover skin. Horizontal Left Horizontal Right
Accessories
Cover
GCSVRF Housing Marking
N = None
GCSVRF-CVR Designation
* ALERT Marking
F-FR = FEU available on white Cover Marking
F-SP = FUEGO strobe model only. N = None
Functions F = FIRE See replacement Functions F-FR = FEU
S = Speaker only A = ALERT* covers for more S = Speaker only F-SP = FUEGO
V = Strobe only options. V = Strobe only F = FIRE
SV = Speaker-Strobe SV = Speaker-Strobe A = ALERT