Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

Work Instructions for Big Generators Spark Arrestor Removal for Transportation Purposes

Preparation: Before removing the spark arrestor, ensure that the generator is shut down and that all
power sources are disconnected. Verify that the area surrounding the generator is free of any hazards or
obstacles.

Access: Locate the spark arrestor on the generator and use appropriate tools to remove any mounting
hardware or clamps that are holding it in place. Carefully remove the spark arrestor from the generator.

Inspection: Conduct a visual inspection of the spark arrestor to ensure that it is free of any damage or
defects. Look for any signs of wear or corrosion that may indicate that the spark arrestor needs to be
replaced.

Cleaning: If the spark arrestor is dirty or clogged, use appropriate cleaning techniques and equipment to
remove any debris or buildup. Take care to avoid damaging any of the spark arrestor components during
the cleaning process.

Transportation: Once the spark arrestor has been removed and inspected, properly label and store it in a
secure location for transportation. Ensure that all safety protocols, including wearing appropriate
personal protective equipment, are followed during the transportation process.

Reinstallation: After transportation, properly reinstall the spark arrestor onto the generator using
appropriate tools and mounting hardware. Follow any manufacturer guidelines or service instructions for
proper installation procedures.

Testing: Once the spark arrestor is reinstalled, conduct a functional test to ensure that the generator is
working correctly. Test any associated systems or components to ensure that they are functioning
correctly.

Final Inspection: After testing, conduct a final inspection of the generator to ensure that all parts and
components are properly installed and secured. Double-check all connections and wiring to ensure that
there are no loose or damaged components.
Note: It is important to follow all safety protocols when removing and reinstalling spark arrestors on big
generators, including using appropriate personal protective equipment and adhering to local and federal
regulations for proper disposal of any waste generated during the process. Additionally, proper testing
and inspection should be conducted before and after any spark arrestor removal or installation to ensure
that the generator is functioning correctly and safely.

You might also like