Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Formation Level

· Ev 2 > 60MPa
· Rayleigh wave velocity) >
1.6 x design train speed
s
le ALW SCEW cl. 5.8.7)

r ab
l ive Sub-Formation Level
de
IFC Upper Embankment Fill (UEF)
In · Ev 2>60MPa Average / Min individual result of 50Mpa per km
with 1 test / 200m Centre Line every 1m height
Down Up

(Table at the end of App. B in ALW SCEW - Contract-specific Tables to 600 Series Appendices )

1m above Lower Embankment Fill Level(LEF)


· Ev 2>45MPa
Track Bed
(Table at the end of App. B in ALW SCEW - Contract-specific Tables to 600 Series Appendices ) 4 4

X
1 1
5.0% 5.0%
Lower Embankment Fill (LEF) Protection Layer
4%

· Ev 2>45MPa Average / Min individual result of 30Mpa per km Prepared Subgrade


with 1 test / 200m Centre Line every 1m height 2.5% 2.5%
(Table in end of App. B in ALW SCEW - Contract-specific Tables to 600 Series Appendices )

2
Top of Foundation Level 1
· Ev 2 >60MPa when Where the top of Upper Embankment Fill - Class 9J
Foundation is <2.0m below Formation Level
(HS2-HS2-GT-STD-000-000001 P08 Table 4.2/2)

Bottom of Foundation Level(?) 1000


· Undrained shear strength >50kPa @0.2m below Subsoil strip
Lower Embankment Fill - Class 9J before installing Landscape Bund
Existing Ground Level excavated "formation level (for soft spots)
114.565 ALW SCEW cl. 5.3.4.1)
Starter Layer - Class 6C

Foundation - Class 1A1 above Water / 6A or Class 6C below Water


1
1
1
1

INTERESTING SCEW FROM AYLESBURY AREA

Termination Criteria (in Julian Case's e-mail)


· Minimum Su: 60kPa*
+Where there is Rayleigh Waves Mitigation
· Rayleigh Wave Velocity of 1.6xDS

* Minimum Su value is based on interpreted characteristic geotechnical parameters


presented in the Geotechnical Design Report. Depth provided in the combined mitigation
table are minimum required depth for excavate and replace, subject to termination criteria.
If soil with adequate undrained shear strength is encountered at shallower level, additional
analysis should be undertaken to determine the feasibility to reduce the depth extent of
excavate and replace.

CONSTRUCTION SEQUENCE
A. WORKS TO BE CONSTRUCTED IN ACCORDANCE WITH THE SEQUENCING SPECIFIED IN THE HS2
SPECIFICATION FOR CIVIL ENGINEERING WORKS SERIES 0600: EARTHWORKS
(HS2-HS2-CV-SPE-000-010600).

LEGENDS:

TOPSOIL
NO
FILTER MATERIAL
T
STARTER LAYER LANDSCAPE EARTHWORKS FILL In
TOPSOIL STRIPPING OR ZONE 1
IF
SUBSOIL STRIPPING LANDSCAPE EARTHWORKS FILL C
UPPER EMBANKMENT FILL
ZONE 2
de
LANDSCAPE EARTHWORKS
liv
LOWER EMBANKMENT FILL FILL ZONE 3 (CLASS 4)
e ra
PROTECTION LAYER DRAINAGE STONE
bl
PREPARED SUBGRADE GEOTEXTILE SEPARATOR es
NATURAL GROUND EXISTING GROUND LEVEL

WALKWAY

You might also like