Professional Documents
Culture Documents
Penyelaras Kursus / Pensyarah Ketua Program
Penyelaras Kursus / Pensyarah Ketua Program
Penyelaras Kursus / Pensyarah Ketua Program
PERANCANGAN KURSUS
COURSE OUTLINE
MAKLUMAT KURSUS
(COURSE INFORMATION)
Kursus Pra-syarat (Pre-Requisite Course) : DMA 1132 - PENGURUSAN DAN KESELAMATAN BENGKEL
NamaPensyarah (Name of Lecturer) :
Tandatangan : Tandatangan :
(Signature) (Signature)
Tarikh(Date) : Tarikh(Date) :
MATLAMAT (GOALS):
The aims of this course is to give a comprehensive understanding of maintenance to the students. So they can perform the
knowledge of machine specification to develop a periodic maintenance schedule, and then respond to the maintenance schedule to
ensure the machine and equipment in a good condition.
SINOPSIS (SYNOPSIS ):
Introduction of Maintenance, Preventive Maintenance, Corrective Maintenance, Predictive Maintenance, Prepare Maintenance
Report
Practical : None
3-5 CHAPTER 2 : PREVENTIVE MAINTENANCE UJIAN BERTULIS,
AMALI (MAINTENANCE)
2.1 Introduction Of Preventive Maintenance
2.2 Activities Of Preventive Maintenance
2.3 Mean Preventive Maintenance Time
2.4 Benefits Of Preventive Maintenance
Practical:
1. Maintenance the machine
6-8 CHAPTER 3 : CORRECTIVE MAINTENANCE UJIAN BERTULIS,
AMALI (MAINTENANCE)
3.1 Introduction Of Corrective Maintenance
3.2 Corrective Maintenance Type
3.2.1 Repair and Adjustment
3.2.2 Breakdown maintenance
3.3 Corrective Maintenance Step
3.4 The Need For Corrective Maintenance
Practical :
1. Maintenance the machine
Practical:
1. Maintenance the machine
12 - 14 PROJEK (SCHEDULE
CHAPTER5 : PREPARE MAINTENANCE REPORT
MAINTENANCE)
5.1 Inspection check sheet verification such as Product drawing and
Filled up check sheet
5.2 Inspection sheet report
5.3 Report endorsement
Practical:
1. Complete the report with endorsement.
15
STUDY WEEK
16
FINAL EXAMINATION WEEK
17
FINAL EXAMINATION WEEK
PENILAIAN (ASSESSMENT):
Hasil Pembelajaran
PROJEK (SCHEDULE
CONTENT
UJIAN BERTULIS
(MAINTENANCE)
MAINTENANCE)
AMALI
CHAPTER 1 INTRODUCTION OF MAINTENANCE √
Remark:
1. Time for
UJIAN BERTULIS: 120 minutes
AMALI (MAINTENANCE): 180 minutes
PROJEK (SCHEDULE MAINTENANCE):-
PENILAIAN AKHIR AMALI : 120 minutes
2. 2. 40 Notional hours is equivalent to 1 credit.
RUJUKAN (REFERENCES):
Amali
(Maintenance) 100%
Practice the knowledge of preparing , Projek student
Practical & s obtain
2 maintenance schedule and report in the P3 (Schedule
Demonstration 50%
practical activities. (P3,PLO2) Maintenance)
& Peperiksaan marks
Akhir Amali and
Case Study, above
Projek
Project, Group
Initiate the preventive maintenance (Schedule
Work & Student
3 activities to ensure the machine in good A3 Centered
Maintenance)
condition. (A3,PLO7) & Peperiksaan
Learning
Akhir Amali
Activities
Jumlah 1 1 1