Professional Documents
Culture Documents
EI8751-Industrial Data Networks
EI8751-Industrial Data Networks
com
DEPARTMENT
OF
ELECTRONICS AND INSTRUMENTATION ENGINEERING
QUESTION BANK
VII SEMESTER
Regulation – 2017
Prepared by
QUESTION BANK
SUBJECT : EI8751-INDUSTRIAL DATA NETWORKS
SEM / YEAR: VII /IV
UNIT I - DATA NETWORK FUNDAMENTALS
Networks hierarchy and switching – Open System Interconnection model of ISO - Data link control
protocol - Media access protocol - Command / response - Token passing - CSMA/CD, TCP/IP.
PART – A
Q.No Questions BT Competence
Level
1. Define line configuration. BTL-1 Remember
2. Discuss any three criteria for a network based
BTL-2 Understand
communication.
3. Summarize the limitations of using a circuit-switching network for
BTL-2 Understand
data transmission.
4. Compose the applications of networks. BTL-6 Create
5. Discuss about the term packet switching. BTL-2 Understand
6. Distinguish X-modem and Y-modem. BTL-4 Analyze
7. Define protocol and also classify the types of data link protocol. BTL-3 Apply
8. Assess the features of hypertext transfer protocol. BTL-5 Evaluate
9. Write the mechanism of sliding window flow control. BTL-6 Create
10. Illustrate open system model. BTL-3 Apply
11. Define topology. What are the different types of topologies? BTL-1 Remember
12. Distinguish between Token Bus and Token Ring. BTL-2 Understand
13. List the disadvantages of asynchronous communication. BTL-1 Remember
14. Define CSMA/CD protocol. BTL-1 Remember
15. List the three main methods of accessing the communication
BTL-1 Remember
media.
16. Compare token passing method with master slave based
BTL-4 Analyze
communication.
17. Mention the modes in HDLC data link control protocol. BTL-5 Evaluate
18. List the benefits of token passing protocol for media access. BTL-1 Remember
19. Analyze How the three HDLC frame types differ from one
BTL-4 Analyze
another.
20. Classify different categories of networks. BTL-3 Apply
PART B
1. i. Mention the advantages and disadvantages of different
network topologies.(4)
BTL-3 Apply
ii. Draw the IP header and explain each field. Explain the
sliding window protocol.(9)
2. Discuss in detail about the functions of ISO-OSI layers.(13) BTL-2 Understand
3. Examine HDLC in terms of frame format and frame contents.(13) BTL-1 Remember
PART C
1. Draw the segment format of TCP and explain the steps involved in
BTL-6 Create
connection establishment and connection termination.(15)
2. Summarize the CSMA/CD MAC technique with necessary
BTL-5 Evaluate
diagrams.(15)
3. Design the Go-back N ARQ and selective reject ARQ selective
BTL-6 Create
error mechanism with flow diagram.(15)
4. Explain the network hierarchy and compare the performances of
BTL-5 Evaluate
Packet switching, Message switching and Circuit switching.(15)
PART B
1. i. Describe the topology, cabling, and encoding scheme used in
Ethernet communication.(8) BTL-1 Remember
ii. List the different types of routers and explain in detail.(5)
2. i. Discuss about the ARC net configuration with neat
BTL-2 Understand
diagram.(10)
ii. Summarize the salient features of ARC net.(3) BTL-5 Evaluate
3. i. Discuss about the Ethernet standards for networks.(6) BTL-2 Understand
ii. Explain bridges and gateways in detail.(7) BTL-5 Evaluate
4. i. List the various Ethernet technologies and explain each
type.(6)
ii. Explain the connectionless gateway configuration and BTL-1 Remember
describe the process of transmitting a datagram from
network to network.(7)
5. i. Explain open system with bridge configuration.(6)
BTL-3 Apply
ii. Illustrate the issues involved in the design of bridges.(7)
6. i. What is the importance of using Gateways?(5)
BTL-1 Remember
ii. Quote the requirements for networks used for control.(8)
7. i. Write the functions of repeaters and explain each in
detail.(8) BTL-3 Apply
ii. Show the importance of Routers in an internet.(5)
8. i. Tabulate the difference between the RS 232 and RS 485
standard.(6) BTL-1 Remember
ii. Describe about the communication used in RS 232.(7)
9. Explain the topology, media access and formats of Actuator sensor
BTL-4 Analyze
interface network solution.(13)
10. Discuss the working of physical layer of AS-i interface, AS-i
BTL-2 Understand
Master call up and slave response frame format.(13)
11. Explain about the communication profile for Device net with
BTL-4 Analyze
necessary diagram.(13)
12. Describe about the RS 485 configuration with neat diagram.(13) BTL-2 Understand
13. Show in detail about Hall-duplex operational sequence of RS-232
with neat flow sketch between DTE and DCE over public BTL-6 Create
switched telephone network.(13)
14. Explain about the operation modes in RS 485. Can you convert RS
BTL-4 Analyze
232 to RS485? Justify.(13)
PART C
1. i. Explain the token passing mechanism of PROFIBUS
standard.(8)
ii. List the three OSI layers used in data highway protocol. BTL-5 Evaluate
Summarize the symbols ,type and description for full duplex
type of same protocol.(7)
2. With respect to MODBUS protocol, elaborate the following
function codes with associated example for request message and
response frame formats.
(i) Read Coil Status (function code 01) (4) BTL-6 Create
(ii) Preset Single Register (function code 06) (4)
(iii) Loop Back Test(function code 08) (4)
(iv) Force Multiple Register(function code 10) (3)
3. i. Compare the features of FF with Profibus. (8)
BTL-5 Evaluate
ii. Explain the installation and troubleshooting of Profibus.(7)
4. Discuss in detail about system operation of PROFIBUS and
BTL-6 Create
classification of PROFIBUS.(15)
PART B
1. i. Describe the modem hardware used for modulation and
demodulation with a neat diagram.(7)
BTL-2 Understand
ii. Write short notes on radio spectrum and frequency
allocation.(6)
2. i. Describe 10 Base-2 Ethernet in detail.(7)
ii. Explain 10 Base-5 Ethernet media system with neat BTL-1 Remember
diagram.(6)
3. i. Illustrate about wireless technologies based on channel rate,
transmit power and range.(7) BTL-3 Apply
ii. Explain the components of radio links and radio modems.(6)
4. i. Summarize the various cable media and transmission rate at
10 Mbps.(7) BTL-5 Evaluate
ii. Write short notes on 10BASE-T.(6)
5. i. Infer the range of frequency bands of radio transmission and
give its applications.(7) BTL-4 Analyze
ii. Compare the features of thin and thick Ethernet.(6)
6. i. Examine the cabling requirement of thin Ethernet.(7)
ii. Draw the schematic of radio modem configuration and BTL-3 Apply
explain in detail.(6)
7. Brief the topology, cabling, media access and collision detection
BTL-1 Remember
schemes of Ethernet Communication.(13)
8. i. Describe 100 Mbps Ethernet with its specifications in
brief.(7) BTL-1 Remember
ii. Quote the features of wireless LAN.(6)
9. i. Distinguish between the IEEE 802.3 and Ethernet V2.(7)
BTL-2 Understand
ii. Discuss about the MAC Frame format.(6)
10. Describe about IEEE 802.3 Frame format.(13) BTL-1 Remember
11. i. Explain how a radio path profile is created while
implementing a radio link.(7)
BTL-6 Create
ii. Explain the modes and features of radio MODEM in
detail.(6)
12. i. Discuss in detail about the components of radio link with BTL-2 Understand
PART C
1. Discuss the features of industrial Ethernet and comment on its
BTL-6 Create
superiority over standard Ethernet.(15)
2. i. Write short notes on ISA 100.(8)
ii. Compare 10 Mbps Ethernet with 100 Mbps Ethernet in BTL-5 Evaluate
detail.(7)
3. Explain briefly about
(i) Topology used in thick and thin Ethernet.(8) BTL-5 Evaluate
(ii) Connectors used in industrial Ethernet.(7)
4. i. Discuss in detail about current ongoing issues of wireless
protocol implementation.(8) BTL-6 Create
ii. Elaborate in detail about clock recovery in modem.(7)