Professional Documents
Culture Documents
Attach 138979952620640150 PDF
Attach 138979952620640150 PDF
Approved RF Components
Issue 3.9
Approved RF Components
Summary: This Datasheet lists the approved RF Components for use in all VMO2 site
build. The use of RF Components not listed is permitted only with the
prior approval of the site Solutions team.
Target Audience: This Datasheet is intended for use by anyone involved in the planning, design and
maintenance of cell sites for VMO2
Issue 3.9 Update: This update reflects the 2022 RFI award results.
Legacy Products: The VMO2 network contains many legacy products, which must not be used for any
new cell build and so are not listed in this datasheet but may remain on site where
they are working correctly.
Contact: matthew.neck@virginmediao2.co.uk
Version Control
Document
Release Comments Author Approval Date
Reference
Issue 3.8 DS7201 Up issued following 2021 RFI Dave Westrup Ian Jenkins 3 August 2021
rd
Issue 3.9 DS7201 Up issued following 2022 RFI Matthew Neck Ian Jenkins 7th February 2023
Issue 3.9 In Confidence - VMO2 & External Partners Less Vodafone Page 1 of 7
11 Jan 2023
DS7201
Approved RF Components
Issue 3.9
RF Combiners
Frequency Bands Supplier Part Number Use Connector Combiner No Data Sheet
C1 - High Band / Low Band
Band 1: 380 to 960 MHz
Ericsson 78211468V01 Click here
Band 2: 1427 to 3800 MHz
Band 1: 555 to 960 MHz Low band / High band combining with 2100 MHA or L800 RET control -
Microdata MI-2944A 4.3-10 C1a Click here
Band 2: 1695 to 2690 MHz Auto Sense DC Bypass
Band 1: 380 to 960 MHz
Rosenberger DCB-2-KH-64F-A02D Click here
Band 2: 1710 to 2690 MHz
C2 - 800 / 900
Band 1: 694 to 862 MHz
Commscope E14F06P45 Click here
Band 2: 880 to 960 MHz
Band 1: 699 to 862 MHz
Microdata MI-5814A Click here
Band 2: 876 to 960 MHz
800 / 900 combining with L800 RET Control – Auto Sense DC Bypass 4.3-10 C2a
Band 1: 694 to 862 MHz
Radio Design RD0696-H4-07 Click here
Band 2: 876 to 960 MHz
Band 1: 694 to 862 MHz
Rosenberger DCB-2-YZ-64F-A02D Click here
Band 2: 880 to 960 MHz
C4 - 1800 / 2100
Commscope E14F06P41YY Click here
Band 1: 1710 to 1880 MHz Microdata MI-5464A Click here
1800 / 2100 combining with MHA – Auto Sense DC Bypass 4.3-10 C4a
Band 2: 1920 to 2170 MHz Radio Design RD0665-H4-01 Click here
Rosenberger DCB-2-DU-64F-A03D Click here
C8 – (1800 + 2100) / (2300 + 2600)
Band 1: 1427 to 2200 MHz
Ericsson 78211798V01 Click here
Band 2: 2300 to 2690 MHz
Band 1: 1695 to 2200 MHz
Microdata MI-5483A (1800 + 2100) / (2300 + 2600) combining – Auto Sense DC Bypass 4.3-10 C8a Click here
Band 2: 2300 to 2700 MHz
Band 1: 1710 to 2180 MHz
Rosenberger DCB-2-BM-64F-A02D Click here
Band 2: 2300 to 2690 MHz
Issue 3.9 In Confidence - VMO2 & External Partners Less Vodafone Page 2 of 7
11 Jan 2023
DS7201
Approved RF Components
Issue 3.9
C9 – 1800 / 2100 / (2300 + 2600)
Band 1: 1710 to 1880 MHz
Band 2: 1920 to 2170 MHz Ericsson 78211408V44 Click here
Band 3: 2300 to 2700 MHz
Band 1: 1710 to 1880 MHz
Band 2: 1920 to 2170 MHz Microdata MI‐2179A 1800 / 2100 / (2300 + 2600) combining – Auto Sense DC Bypass 4.3‐10 C9a Click here
Band 3: 2300 to 2690 MHz
Band 1: 1710 to 1880 MHz
Band 2: 1920 to 2180 MHz Rosenberger DCB‐3‐DUM‐64F‐A02D Click here
Band 3: 2300 to 2690 MHz
C11 ‐ 800 / 900 / 1800 / (2100 + 2600)
Band 1: 694 to 862 MHz Microdata MI‐7574A Click here
Band 2: 880 to 960 MHz Radio Design RD0812‐H4‐01 Click here
800 / 900 / 1800 / (2100 + 2600) combining ‐ Auto Sense DC Bypass 4.3‐10 C11a
Band 3: 1710 to 1880 MHz
Rosenberger DCB‐4‐YZDJ‐64F‐A02D Click here
Band 4: 1920 to 2690 MHz
C12 ‐ 1800 / 2100 / 2300 / 2600
Band 1: 1325 to 1880 MHz
Band 2: 1920 to 2170 MHz
Commscope E14F15P31 Click here
Band 3: 2300 to 2400 MHz
Band 4: 2500 to 2690 MHz
Band 1: 1710 to 1880 MHz
Band 2: 1920 to 2170 MHz
Microdata MI‐26141 1800 / 2100 / 2300 / 2600 combining ‐ No DC Bypass 4.3‐10 C12a Click here
Band 3: 2300 to 2400 MHz
Band 4: 2500 to 2690 MHz
Band 1: 1710 to 1880 MHz
Band 2: 1920 to 2170 MHz
Radio Design RD0799‐H4‐01 Click here
Band 3: 2300 to 2400 MHz
Band 4: 2496 to 2690 MHz
C14 – 2300 / 2600
4.3‐10 &
Band 1: 2300 to 2400 MHz Commscope E14F06P04 Click here
2300 / 2600 8 way combining – No DC bypass NEX10
Band 2: 2570 to 2595 MHz C14
Radio Design RD0821‐H4‐01 Band rejection in 2645 – 2690 MHz bands (20 dB) Click here
4.3‐10
Band 1: 2300 to 2400 MHz Rosenberger QCB‐2‐NE‐64F‐A04 Click here
Issue 3.9 In Confidence - VMO2 & External Partners Less Vodafone Page 3 of 8
11 Jan 2023
DS7201
Approved RF Components
Issue 3.9
Issue 3.9 In Confidence - VMO2 & External Partners Less Vodafone Page 4 of 7
11 Jan 2023
DS7201
Approved RF Components
Issue 3.9
RF Routers
Please contact matthew.neck@virginmediao2.co.uk for required RF Configuration and suppliers for active RF Routers
TDD 2600 Interference Mitigation Filters (See next Page for further information)
Band Pass 1: 2500 to 2570 MHz Commscope E16V87P63 Band rejection in 2575-2615 MHz band – DC Bypass Click here
4.3-10 F1
Band Pass 2: 2620 to 2690 MHz Rosenberger DFT-26-70-64F-A02 Band rejection in 2575-2615 MHz band – No DC Bypass Click here
Commscope E14V00P58 Band rejection in 2500-2570MHz & 2620-2690MHz bands Click here
Band Pass 1: 2575 to 2615 MHz 4.3-10 F2
Rosenberger DFT-26-40-64F-A02 NOTE: P58 quad unit replaces P64 dual unit. RB is a dual unit. Click here
In the event of the above components not being suitable for a particular requirement, please contact matthew.neck@virginmediao2.co.uk for further advice
Issue 3.9 In Confidence - VMO2 & External Partners Less Vodafone Page 5 of 7
11 Jan 2023
DS7201
Approved RF Components
Issue 3.9
Where TDD 2600 is deployed for Telefonica, Interference Mitigation Filters (IMF) are required to avoid interference into and from other MNO’s FDD 2600 (Vodafone and EE) – this is due to
the nature of the TEF TDD downlink transmitting into the FDD receive bands, and VF / EE FDD downlink Transmitting into TEF TDD Receive band as per below diagram – See REC/21/008,
Issue 3, 11/03/212600 MHz filtering and isolation requirements for further information. The filters must be installed as shown in the generic RF Schematic below.
Where VF FDD 2600 is not deployed, the TEF TDD 2600 filters (F2) are still required to be installed to protect TEF TDD from nearby VF or EE FDD 2600 emissions.
Issue 3.9 In Confidence - VMO2 & External Partners Less Vodafone Page 6 of 7
11 Jan 2023
DS7201
Approved RF Components
Issue 3.8
END OF DOCUMENT
The author of this document is Matthew Neck, Radio Design. For any questions or issues, please contact the Author
Issue 3.9 In Confidence - VMO2 & External Partners Less Vodafone Page 7 of 7
11 Jan 2023
Dual-Band Combiner
380 – 960 MHz 1427 – 3800 MHz
Port 3
Priority table for the variants 78211467V01 and 78211468V01
with Priority Controlled Function
380-960 MHz Priority 2 (lowest)
1427-3800 MHz Priority 1 (highest)
For more information see Auto-Sense quick guide later in DC / AISG
Auto-Sense
this datasheet.
Port 1 Port 2
380 - 960 1427 - 3800
Technical Data
Type No.
DC/AISG transparency
1. First In - First Out Function 78211467 78211468
2. Priority Controlled Function 78211467V01 78211468V01
3. Exclusive User Function 78211467V02 78211468V02
Unit Single Double
Pass band
Band 1 MHz 380 – 960
Band 2 MHz 1427 – 3800
Insertion loss
Port 1 ↔ Port 3 dB < 0.2 (380 – 960 MHz)
Port 2 ↔ Port 3 dB < 0.2 (1427 – 3800 MHz)
Isolation
Port 1 ↔ Port 2 dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300 / < 200 (1427 – 2700 MHz); < 100 (2700 – 3800 MHz)
Intermodulation products dBc < −160 (3rd order; with 2 x 20 W)
Subject to alteration.
DC stop
50-Ohm load
Diagramm II
Dimensions in mm
Port 1 ↔ Port 3 Port 2 ↔ Port 3
380-960 MHz 1427-3800 MHz
54,4
70,4
30,8
22
52,5
28 22
130,4
89,4
90,8
30,8
29,4
30
235
15
7
38
Please Note:
liability, we are obliged to point out certain risks that may arise when products are
290
used under extraordinary operating conditions.
270
249,9 Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress
183 Erdungsschraube M8 (e.g. strain caused by oscillating support structures), may result in the breakage of a
Grounding screw M8
mast mounted device or even cause it to fall to the ground.
The combiners are designed to operate under the environmental conditions as described
in ETS 300 019-1-4 class 4.1 E and have passed environmental tests as recommended in
936.0000039d
59
40
The installation team must be properly qualified and also be familiar with the
relevant national safety regulations.
TECHNICAL SPECIFICATIONS
BAND NAME 555 - 960 1695 - 2690
Passband 555 - 960MHz 1695 - 2690MHz
Insertion loss 0.1dB typical (0.2dB maximum) 0.1dB typical (0.2dB maximum)
Return loss > 20dB > 20dB
Maximum input power 250W (average) / 2kW (PEP) 250W (average) / 2kW (PEP)
Intermodulation products < -160dBc at 2 x 43dBm TX Carrier
Rejection high band 50dB min N/A
Rejection low band N/A 50dB min
DC / AISG
Feature DC-FIXED DC-AUTOSENSE
Compliance 3GPP, TS 25.461 3GPP, TS 25.461
Passband 0 - 3MHz 0 - 3MHz
Insertion loss, single DC/AISG pass 1dB maximum 1dB maximum
Return loss, single DC/AISG pass 12dB minimum 12dB minimum
Insertion loss, two DC/AISG pass 4.5dB maximum 4.5dB maximum
Return loss, two DC/AISG pass 6dB typical 6dB typical
Input voltage range 8 – 31V DC 8 – 31V DC
DC current rating 3A 2A
Power consumption 0.3W
Port priority (combiner mode) N/A Refer Ordering Information
ORDERING INFORMATION
PART NUMBER CONFIGURATION OPTIONAL FEATURES CONNECTORS DC/AISG CONFIGURATION
DBC0115F1V71-1 SINGLE 1 in /2 out DC AUTOSENSING 4.3-10 (F) PRIORITY 1695 - 2690/555 - 960
KAELUS BRAND
DBC0115F1V71-2 TWIN 2 in / 4 out DC AUTOSENSING 4.3-10 (F) PRIORITY 1695 - 2690/555 - 960
KAELUS BRAND
MI-29431 SINGLE 1 in /2 out FIXED DC 4.3-10 (F) NO DC
MICRODATA BRAND
MI-2943A SINGLE 1 in /2 out DC AUTOSENSING 4.3-10 (F) PRIORITY 1695 - 2690/555 - 960
MICRODATA BRAND
MI-2944A TWIN 2 in / 4 out DC AUTOSENSING 4.3-10 (F) PRIORITY 1695 - 2690/555 - 960
MICRODATA BRAND
Main Features
Compact, low weight
Low PIM
High reliability
Simple installation
Electrical Data
Frequency CH1: 380~960MHz
CH2: 1710~2690MHz
Return loss -18dB
Insertion loss 0.5dB
Isolation ≥ 50dB
Power handling 200W per port
DC Bypass Auto sense
Intermodulation (3rd order) -117dBm@2x20W
Impedance 50
Environmental Data
Operating temperature range -25°C to +65°C
Storage temperature range -40°C to +85°C
Relative humidity 5%- 95%
Applications IP68
QP-TQ4TE-067/7.0
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 1/2
BRW-DS-T-2268
Data Sheet
Mechanical Data
Dimension 181 x 110 x107 (mm, excluding connectors and brackets)
Weight 3.6kg
Connectors type 4.3-10 female
Mounting Wall or pole
Packing 1pcs in box
Outline Drawing
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our
part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we
reserve the right to make changes judged to be necessary.
QP-TQ4TE-067/7.0
Draft Date Checker Approved Date Rev. Engineering change number Name Date
XQ.W 15/Apr/2022 Rex Joson 15/Apr/2022 0.1 XQ.W 15/Apr/2022
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 2/2
E14F06P45
New 4.3-10 connectors for improved PIM performance and size reduction
Minimal Insertion Loss
DC/AISG SMART bypass functionality
Product Classification
Product Type Diplexer
General Specifications
Color Gray
Modularity 2-Twin
Dimensions
Height 110 mm | 4.331 in
Outline Drawing
Page 1 of 4
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: April 6, 2022
E14F06P45
Electrical Specifications
Impedance 50 ohm
License Band, Band Pass APT 700 | CEL 900 | EDD 800 | LMR 750 | LMR 800 | LMR 900 | USA
700 | USA 750
Electrical Specifications
Page 2 of 4
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: April 6, 2022
E14F06P45
Sub-module 1|2 1|2
Branch 1 2
Port Designation PORT 1 694-862 PORT 2 880-960
License Band APT 700, Band Pass LMR 900, Band Pass
LMR 750, Band Pass CEL 900, Band Pass
LMR 800, Band Pass
USA 700, Band Pass
USA 750, Band Pass
EDD 800, Band Pass
Block Diagram
Environmental Specifications
Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Page 3 of 4
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: April 6, 2022
E14F06P45
Packaging and Weights
Included Mounting hardware
Volume 2.7 L
Regulatory Compliance/Certifications
Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
Page 4 of 4
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: April 6, 2022
MI-581nn
MICRODATA Diplexer 700-800/900
TELECOM The MI-581nn family of cavity diplexer products, include:
- MI-581nA, diplexer with DC/AISG Auto-Sense
- MI-581n1, diplexer with all ports DC grounded This picture is showing MI-5813n
MASS™ Specifications
Microdata Advanced Site Solutions ww
Low band
With our expertise in site
Frequency Band 699 - 862 MHz
system design we are able
to provide a solution for Insertion Loss 0.2 dB*, 0.4 dB max.
any site sharing or upgrade Return Loss >18 dB
scenario. Rejection 925 - 960 MHz >50 dB
Continuous Average Power 400 W
Our focus area is RF-filter Intermodulation, 2x43 dBm TX Carrier -117 dBm
based solutions including High Band
combiners, multi band TMAs,
Frequency Band 876 - 960 MHz
di-, tri- and quadruplexers.
Insertion Loss 0.2 dB*, 0.4 dB max.
* Typical
All values in spec are subject to change without notice Page 1/2 MI-581nn_210331_C.pdf
Selection Guide
Connector (F)
7/16 4.3-10
Auto-Sense: MI-581nA
*The dual filter configuration is mounted on a single bracket for hose clamp or wall mount.
Auto-Sense Priority
Common Common Common Common
700-800 900
Mechanical Drawing MI-581nA.1 FPO FPO
The picture is showing MI-5813n
MI-581nA.3 2 1
MI-581nA.4 1 2
All values in spec are subject to change without notice Page 2/2 MI-581nn_210331_C.pdf
GENERAL
Integrated lightning strike
Return loss on all ports >18 dB
protection
Port to port isolation >35 dB
Sheet 1 of 6
RD0696-XX
694-862 MHz / 876-960 MHz Dual Combiner with Auto BypassTM
Variants
The required variant can be ordered using the following variant numbering format in conjunction with the
variant table:
Channel 1 Channel 2
Variant
(RD0696-XX)
Smart Bias-T DC/AISG Path Smart Bias-T DC/AISG Path
01 No None No None
02
No None No None
(See Note 1)
Yes
03 Smart Bias-T to Port 3 No Ports 4 & 5 to Port 6
(Note 2)
Yes Auto Bypass on Ports 1, 2 and Yes Auto Bypass on Ports 4, 5 and
08
(Note 2) Smart Bias-T (Note 2) Smart Bias-T
The RD0696 provides the option of a built in smart bias-T allowing DC/AISG signals to be injected and removed
from the Common Port(s) of the unit. The smart bias-T specifications are as follows:
Auto Bypass detects the presence of DC on the input ports of the combiner and connects the highest priority
port on which DC is present to the COMMON port according to a pre-programmed precedence table.
This functionality promotes flexibility in the choice of controlling base station and allows the controlling
base station to be changed without the need to swap combiners.
2 X X DC DC/AISG - PORT 3
3 DC X No DC PORT 1 - PORT 3
4 No DC DC No DC PORT 2 - PORT 3
2 DC X PORT 1 - PORT 3
3 No DC DC PORT 2 - PORT 3
Auto Bypass path switching occurs when DC is detected for >500 ms. LEDs indicate from which port the
DC/AISG is provided. The quiescent current consumption is <=15 mA. The low quiescent current consumption
of the unit enables deployment in both CWA and AISG site configurations.
The Auto Bypass requires DC to be present in order to function correctly – it will not detect an AISG signal
alone.
When more than one source is connected, the non-selected ports are seen as high impedance loads (>1 k
ohm).
The operation of the auto bypass unit in combiner configuration is indicated by the LEDs as follows:
LED continuously ON: The port is powered, connected to the common port and provides the
DC/AISG path through the unit.
LED Blinking (10% ON/90% OFF): The port is powered but is low priority and not connected to the common
port.
LED Blinking (50% ON/50% OFF): Indicates a fault on the common port. The LED associated with the port
connected to the common port at the point the fault occurred indicates
the fault. All other LEDs are OFF. The auto bypass unit must be powered
down completely to reset the unit.
The Auto Bypass functionality enables the combiner to be deployed in the field as a splitter with a transparent site
upgrade path for ALDs connected to the unit.
Auto Bypass detects if DC is present and, if so, establishes DC/AISG paths from the common port(s) to all output ports
connected to ALDs requiring DC/AISG connectivity. Multiple output ports can be supplied simultaneously with the DC/AISG
feed.
Auto Bypass path switching occurs when DC is detected for >500 ms. LEDs indicate to which ports the DC/AISG is
provided.
In splitter operation the unit detects malfunctions in the connected ALDs that result in excessive current and disables
the DC/AISG connection to the corresponding port thus protecting the system.
The operation of the auto bypass unit in splitter configuration is indicated by the LEDs as follows:
LED continuously ON: The common port is powered. The port indicated by the LED is connected to the
common port and provides a DC/AISG path. CROSS BAND COMBINERS
All LEDs OFF: The common port is not powered. There is no DC/AISG connectivity through the
unit.
LED Blinking (50% ON/50% OFF): The port indicated by the LED is not connected to or has been disconnected from
the common port due to a s/c fault detected on the port (i.e. a fault in the connected
equipment has been detected at start-up or has developed during operation). There
is no DC/AISG connectivity through the unit on this path. To re-establish the
DC/AISG path the fault must be rectified and the auto bypass unit reset by cycling
common port power.
Main Features
Compact, low weight
Low PIM
High reliability
Simple installation
Electrical Data
Frequency CH1: 694~862MHz
CH2: 880~960MHz
Return loss -18dB
Insertion loss 0.5dB
Isolation ≥ 50dB
Power handling 200W per port
Intermodulation (3rd order) -117dBm@2x20W
DC/AISG Bypass Auto sense
Impedance 50
Environmental Data
Operating temperature range -25°C to +65°C
Storage temperature range -40°C to +85°C
Relative humidity 5%- 95%
Applications IP68
QP-TQ4TE-067/7.0
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 1/2
BRW-DS-T-2269
Data Sheet
Mechanical Data
Dimension 166 x 133 x 165(mm, excluding brackets and connectors)
Weight 5.5kg
Connectors type 4.3-10 female
Mounting Wall or pole
Packing 1pcs in box
Outline Drawing
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our
part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we
reserve the right to make changes judged to be necessary.
QP-TQ4TE-067/7.0
Draft Date Checker Approved Date Rev. Engineering change number Name Date
XQ.W 15/Apr/2022 Rex Joson 15/Apr/2022 0.1 XQ.W 15/Apr/2022
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 2/2
DESCRIPTION: CS-DPX 14-18/21-23-26 DCauto
Document version: 00
Change number: 7096697
Document issue date: 14 September 2021 Page 1 of 5
DESCRIPTION: CS-DPX 14-18/21-23-26 DCauto
ELECTRICAL SPECIFICATION
1350-1880 port to COMMON port
Frequency Band 1350 to 1525 MHz
1710 to 1880 MHz
Impedance 50 Ω
Insertion Loss 0.35 dB Typ / 0.45 dB Max
Insertion Loss ripple 0.3 dB Typ / 0.35 dB Max
Return Loss 1350-1880 port 20 dB Typ / 18 dB Min
Return Loss COMMON port 20 dB Typ / 18 dB Min
Group Delay 20 ns Typ / 30 ns Max
Group Delay variation 15 ns Typ / 25 ns Max
Rejection in 1920-2690 port band 52 dB Typ / 50 dB Min
IMD in any RX band COMMON port (2 CW tones +43 dBm each) -119 dBm Typ / -117 dBm Max
Input TX RMS Power (CW tone, each module) 200 W Max
Input TX Peak Power (CW tone, each module)1 2000 W Max
Document version: 00
Change number: 7096697
Document issue date: 14 September 2021 Page 2 of 5
DESCRIPTION: CS-DPX 14-18/21-23-26 DCauto
DC/AISG TRANSPARENCY
AISG
Frequency AISG 2.176 MHz
Impedance 50 Ω
Insertion Loss single path split (max current, min voltage) 1.2 dB Typ / 1.4 dB Max
Insertion Loss combiner (max current, min voltage) 0.8 dB Typ / 1 dB Max
Return Loss combiner (max current, min voltage) 12 dB Typ / 10 dB Min
DC
DC bypass Autosense
DC bypass modes Combiner or Splitter MODE
DC bypass power-up to operating time 300 ms Max
Current single path 2 A Max
Current COM path 2 A Max
Overcurrent protection Combiner (HICCUP-MODE) >2A
Overcurrent protection Splitter (one shot) >2A
DC voltage bypass (operational) 7 - 30 V
Power Supply Voltage (survival) 0 - 30 V
All Port DC impedance See truth table
Voltage Drop @ 1 A 1 V Max
Current consumption @ 10-19 V 10 mA Max
DC/AISG LOGIC
NOTE:
It is to be understood that in AISG1.1 or AISG2.0, only 1 of the connected BTS must be the primary AISG
controller to drive up to 2 TMAs or RETs.
The AISG protocol only allows 1 DC+AISG to be put on the same physical feeder.
Document version: 00
Change number: 7096697
Document issue date: 14 September 2021 Page 3 of 5
DESCRIPTION: CS-DPX 14-18/21-23-26 DCauto
COMBINER mode: One of two Ports (1-2) is selected to the COMMON port
1920-2690
1350-1880
1920-2690
1350-1880
1920-2690
1350-1880
COMMON
COMMON
Port
Port
Port
Port
Port
Port
MODE
SPLITTER mode: COMMON port is split to Ports (1-2) with valid impedance
1920-2690
1350-1880
1920-2690
1350-1880
1920-2690
1350-1880
COMMON
COMMON
Port
Port
Port
Port
Port
Port
MODE
FAULT/OFF mode
1920-2690
1350-1880
1920-2690
1350-1880
1920-2690
1350-1880
COMMON
COMMON
Port
Port
Port
Port
Port
Port
MODE
Document version: 00
Change number: 7096697
Document issue date: 14 September 2021 Page 4 of 5
DESCRIPTION: CS-DPX 14-18/21-23-26 DCauto
MECHANICAL SPECIFICATION
RF Connectors 4.3-10 F (Neck > 25 mm)
RF Connectors Configuration In-line
Weight 3.6 kg
Weight without mounting brackets 3.1 kg
Volume without connectors and mounting brackets 2.15 L
Dimensions without connectors and mounting brackets 141 x 143 x 106 mm (+/- 1 mm)
Outside finish RAL 7047
Product Configuration Clam-shell of single modules
Mounting option Wall / Pole (Ø 43 to 122 mm)
Mounting orientation Any
Ground screw M5
PACKAGING SPECIFICATION
Single box Ref. ETSI EN 300 019-2-2 class T2.2
ENVIRONMENTAL SPECIFICATION
Category Outdoor (ref. ETSI EN 300 019-1-4)
Ambient Operating Temperature Range -40 to 65 °C
Wind Speed 67 m/s (240 km/h) Max
IP Class IP67, connectors unmated
Lightning protection any port 10 kA, 8/20 us pulse
(ref. IEC 61000-4-5)
EMC / EMI Ref. EN 55024, EN 55032,
GR-CORE1089
Electrical safety IEC/EN/UL 62368-1;IEC/EN 60950-22
(outdoor equipment)
Corrosion resistance Ref. IEC 60068-2-11; ASTM B-117,
28 days; connectors mated
RELIABILITY SPECIFICATION
MTBF (Telcordia SR-332 @ 25°C ambient) 1000000 hours/failure Min
Lifetime 10 years Min
REGULATORY
RoHS compliance 2.0
CE marking Yes
Document version: 00
Change number: 7096697
Document issue date: 14 September 2021 Page 5 of 5
MI-546nn
MICRODATA Diplexer 1800/2100 MHz
TELECOM
The MI-546nn family of cavity diplexer products include:
- MI-546nA, diplexer with DC/AISG Auto-Sense
- MI-546n1, diplexer with all ports DC grounded
- MI-546n2, diplexer with DC/AISG on Common – High & Low Band
- MI-546n3, diplexer with DC/AISG on Common - High Band, Low port DC grounded
- MI-546n4, diplexer with DC/AISG on Common - Low Band, High port DC grounded
MASS™ Specifications
This picture is showing MI-5464n
Selection Guide
Connector (F)
7/16 4.3-10
*The dual filter configuration is mounted on a single bracket for hose clamp or wall mount.
All values in spec are subject to change without notice Page 1/2 MI-546nn_210331_C.pdf
Auto-Sense Priority
1800 2100
MI-546nA.3 2 1
MI-546nA.4 1 2
Mechanical Drawing
*This picture is showing MI-5460n *This picture is showing MI-5461n
All values in spec are subject to change without notice Page 2/2 MI-546nn_210331_C.pdf
Passive Intermodulation <-110 dBm (2x43 dBm carriers) Enables efficient sharing of feeder
cables
DC / AISG path AISG1.1, AISG2.0 & 3GPP compliant
DC Bypass Voltage 8-30 V -40°C to +65°C operating range
Max Bypass Current (normal operation) 1A
(COMMON PORT) Available with 7-16 connectors or
Max Bypass Current (≤60 s) 3A 4.3-10 connectors
Earth Stud M8
Sheet 1 of 5
RD0665-XX
1710-1880/1920-2170 MHz Dual Combiner with Auto BypassTM
Auto Bypass
The Auto Bypass function enables the combiner to be deployed in the field as a combiner with a
transparent site upgrade path if the controlling base station for antenna line devices is changed.
Auto Bypass detects if DC is present and, if so, connects the input port on which DC is detected to the
common output port depending on the port precedence shown in the following table.
2 DC X PORT 1 - PORT 3
3 No DC DC PORT 2 - PORT 3
X = Don’t care state (i.e. it is irrelevant whether DC is applied to these ports or not)
2 DC X PORT 4 - PORT 6
3 No DC DC PORT 5 - PORT 8
X = Don’t care state (i.e. it is irrelevant whether DC is applied to these ports or not)
Auto Bypass path switching occurs when DC is detected for >500 ms. LEDs indicate from which port the
DC/AISG is provided. The quiescent current consumption ≤15 mA. The low quiescent current consumption of
the unit enables deployment in both CWA and AISG site configurations.
The Auto Bypass requires DC to be present in order to function correctly – it will not detect AISG signal alone.
When more than one source is connected, the non-selected ports are seen as high impedance loads (>1 k
ohm).
The operation of the auto bypass unit in combiner configuration is indicated by the LEDs as follows:
LED continuously ON: The port is powered, connected to the common port and
provides the DC/AISG path through the unit.
LED Blinking (10% ON/90% OFF): The port is powered but is low priority and not connected to the
common port.
LED Blinking (50% ON/50% OFF): Indicates a fault on the common port. The LED associated with
the port connected to the common port at the point the fault
occurred indicates the fault. All other LEDs are OFF. The auto
bypass unit must be powered down completely to reset the unit.
Sub Heading
The Auto Bypass functionality enables the combiner to be deployed in the field as a splitter with a transparent
site upgrade path for ALDs connected to the unit.
Auto Bypass detects if DC is present and, if so, establishes DC/AISG paths from the common port(s) to all
output ports connected to ALDs requiring DC/AISG connectivity. Multiple output ports can be supplied
simultaneously with the DC/AISG feed.
Auto Bypass path switching occurs when DC is detected for >500 ms. LEDs indicate to which ports the DC/AISG
is provided.
In splitter operation the unit detects malfunctions in the connected ALDs that result in excessive current and
disables the DC/AISG connection to the corresponding port thus protecting the system.
The operation of the auto bypass unit in splitter configuration is indicated by the LEDs as follows:
LED continuously ON: The common port is powered. The port indicated by the LED is
connected to the common port and provides a DC/AISG path.
All LEDs OFF: The common port is not powered. There is no DC/AISG
connectivity through the unit.
LED Blinking (50% ON/50% OFF): The port indicated by the LED is not connected to or has been
disconnected from the common port due to a s/c fault detected
on the port (i.e. a fault in the connected equipment has been
detected at start-up or has developed during operation). There is
no DC/AISG connectivity through the unit on this path. To re-
establish the DC/AISG path the fault must be rectified and the
auto-bypass unit reset by cycling common port power.
Variants
Sub Heading
Connector Options:
To specify 7-16 connectors, please order RD0665-XX
To specify 4.3-10 connectors, please order RD0665-H4-XX
Main Features
Compact, low weight
Low PIM
High reliability
Simple installation
Electrical Data
Frequency CH1: 1710~1880MHz
CH2: 1920~2170MHz
Return loss -18dB
Insertion loss 0.5 dB
Isolation ≥ 50dB
Power handling 200W per port
Intermodulation (3rd order) -117dBm@2x20W
DC/AISG Bypass Auto sense
Impedance 50
Environmental Data
Operating temperature range -25°C to +65°C
Storage temperature range -40°C to +85°C
Relative humidity 5%- 95%
Applications IP68
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 1/2
BRW-DS-T-2270
Data Sheet
Mechanical Data
Dimension 150×1 63×1 05.5 (mm, excluding brackets and connectors)
Weight 3.8kg
Connectors type 4.3-10 female
Mounting Wall or pole
Packing 1pcs in box
Outline Drawing
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our
part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we
reserve the right to make changes judged to be necessary.
QP-TQ4TE-067/7.0
Draft Date Checker Approved Date Rev. Engineering change number Name Date
XQ.W 15/Apr/2022 Rex Joson 15/Apr/2022 0.1 XQ.W 15/Apr/2022
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 2/2
Dual-Band Combiner
Type No.
DC/AISG transparency
1. First In - First Out Function 78211797 78211798
2. Priority Controlled Function 78211797V01 78211798V01
3. Exclusive User Function 78211797V02 78211798V02
Unit Single Double
Pass band
Band 1 MHz 1427 – 2200
Band 2 MHz 2300 – 2690
Insertion loss
Port 1 ↔ Port 3 dB < 0.2 (1427 – 2200 MHz)
Port 2 ↔ Port 3 dB < 0.2 (2300 – 2690 MHz)
Isolation dB > 50
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300
Intermodulation products dBc < −160 (3rd order; with 2 x 20 W)
Temperature range °C | °F −55 ... +60 | −67 ... +140
936.0000016d | Subject to alteration.
DC stop
Diagram 2
Dimensions in mm
Please Note:
The combiners are designed to operate under the environmental conditions as described
in ETS 300 019-1-4 class 4.1 E and have passed environmental tests as recommended in
ETS 300 019-2-4.
The installation team must be properly qualified and also be familiar with the
relevant national safety regulations.
MASS™ Specifications
Microdata Advanced Site Solutions Low band
Frequency Band 1695 - 2200 MHz
With our expertise in site
system design we are able Insertion Loss < 0.1 dB*
to provide a solution for Return Loss > 18 dB
any site sharing or upgrade Rejection high band 50 dB
scenario. Continuous Average Power 250 W
Intermodulation, 2x43 dBm TX Carrier -117 dBm
Our focus area is RF-filter High band
based solutions including
Frequency Band 2300 - 2700 MHz
combiners, multi band TMAs,
Insertion Loss < 0.12 dB*
di-, tri- and quadruplexers.
Return Loss > 18 dB
Our product portfolio Rejection low band 50 dB
supports all frequencies Continuous Average Power 250 W
for mobile communication Intermodulation, 2x43 dBm TX Carrier -117 dBm
bands ranging from 450 MHz Environmental
to 6 GHz. Operating Temperature Range -40 to +60°C | -40 to +140°F
Operation ETS 300 019-1-4 Class 4.1E
Site and network sharing
Storage ETS 300 019-1-1 Class 1.2
makes it cost efficient to
reach sparsely populated Ingress Protection IP67
areas where new subscribers Electrical With Auto-Sense
can contribute to revenue. Lightning Protection 10 kA 8/20 µs 5 kA 8/20 µs
DC By Pass 3A 2 A, drop max 2.4 V
AISG pass Yes
AISG RL >12 dB
MASS™ AISG Loss < 1dB
Advantage
Input Voltage Power 8-30 V max 0.3 W
Increases coverage Impedance 50 Ω 50 Ω
more traffic & higher ARPU Mechanical 4:2 8:4
Dimensions (WxHxD) 239x110x48.5 mm 239x110x89 mm
Increases capacity 9.41x4.33x1.91 in 9.41x4.33x3.50 in
more traffic & higher ARPU With Auto-sense 239x110x60 mm 239x110x118 mm
9.41x4.33x2.36 in 9.41x4.33x4.65 in
Reduces the cost Volume 1.3 l 2.3 l
of network expansion With Auto-sense 1.6 l 3.1 l
Weight 2.6 kg | 5.73 lb 4.4 kg | 9.70 lb
Minimizes
With Auto-Sense 2.8 kg | 6.17 lb 5.0 kg | 11.02 lb
site acquisition issues
Connectors 2XANT, 4XBTS 4xANT, 8xBTS
Mounting Hose clamps or wall mount (Supporter Pole Diameter: 40-140mm)
Colour NCS 1502-R
Bracket Included
Shipping Information 4:2 8:4
Carton Size 275x215x110 mm TBA
10.83x8.46x4.33 in
Carton Qty/Pallet 72
*typical
Selection Guide
Connector (Female, long neck)
7/16 4.3-10
Auto-Sense: MI-548nA
All values in spec are subject to change without notice Page 1/2 MI-548nn_210331_C.pdf
Common Common
Auto-Sense Priority
Common Common
1695-2200 2300-2700
MI-548nA.3 2 1
Mechanical Drawing
MI-548nA.4 1 2
*This picture is showing MI-5484n
All values in spec are subject to change without notice Page 2/2 MI-548nn_210331_C.pdf
Main Features
Compact, low weight
Low PIM
High reliability
Simple installation
Electrical Data
Frequency CH1: 1710~2180MHz
CH2: 2300~2690MHz
Return loss -18dB
Insertion loss 0.5 dB
Isolation ≥ 50dB
Power handling 200W per port
Intermodulation (3rd order) -117dBm@2x20W
DC/AISG Bypass Auto sense
Impedance 50
Environmental Data
Operating temperature range -25°C to +65°C
Storage temperature range -40°C to +85°C
Relative humidity 5%- 95%
Applications IP68
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 1/2
BRW-DS-T-2271
Data Sheet
Mechanical Data
Dimension 145 x 123 x 109.5(mm, excluding brackets and connectors)
Weight 3.0kg
Connectors type 4.3-10 female
Mounting Wall or pole
Packing 1pcs in box
Outline Drawing
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our
part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we
reserve the right to make changes judged to be necessary.
QP-TQ4TE-067/7.0
Draft Date Checker Approved Date Rev. Engineering change number Name Date
XQ.W 15/Apr/2022 Rex Joson 15/Apr/2022 0.1 XQ.W 15/Apr/2022
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 2/2
Triple-Band Combiner
Attenuation / dB
734360 34 – 60 | 1.34 – 2.36 -10 1710 - 1880 1920 - 2170 2300 - 2700
734364 120 – 140 | 4.72 – 5.51
734365 45 – 125 | 1.77 – 4.92 -20
-30
DC stop
-40
-50
-80
1680 1780 1880 1980 2080 2180 2280 2380 2480 2580 2680 2780
Frequency / MHz
Dimensions in mm
-0,10
-0,20
64
82
22
-0,30
40
-0,50
-0,60
135
153
71
-0,70
-0,80
22
40
-0,90
102
64
-1,00
66,5 35
1680 1780 1880 1980 2080 2180 2280 2380 2480 2580 2680 2780
Frequency / MHz
8,5
98,75
Please Note:
(e.g. strain caused by oscillating support structures), may result in the breakage of a
332
302
The combiners are designed to operate under the environmental conditions as described
in ETS 300 019-1-4 class 4.1 E and have passed environmental tests as recommended in
ETS 300 019-2-4.
The installation team must be properly qualified and also be familiar with the
relevant national safety regulations.
MASS™ Specifications
Microdata Advanced Site Solutions Port 1 (1800) - Common
Frequency Band 1710 - 1880 MHz
With our expertise in site
system design we are able Insertion Loss 0.15 dB*, 0.2/0.4 dB max (RX/TX)
to provide a solution for Return Loss > 18 dB
any site sharing or upgrade Rejection 1920 - 2170 MHz 50 dB
scenario. Rejection 2300 - 2690 MHz 50 dB
Continuous Average Power 250 W
Our focus area is RF-filter Intermod. (IM3), 2x43 dBm TX Carrier 160 dBc
based solutions including
Port 2 (2100) - Common
combiners, multi band TMAs,
Frequency Band 1920 - 2170 MHz
di-, tri- and quadruplexers.
Insertion Loss 0.2 dB*, 0.5 dB max
Our product portfolio Return Loss > 18 dB
supports all frequencies Rejection 1710 - 1880 MHz 50 dB
for mobile communication Rejection 2300 - 2400 MHz 50 dB
bands ranging from 450 MHz Rejection 2500 - 2690 MHz 50 dB
to 6 GHz. Continuous Average Power 250 W
Intermod. (IM7), 2x43 dBm TX Carrier 160 dBc
Site and network sharing
Port 3 (2300-2600) - Common
makes it cost efficient to
reach sparsely populated Frequency Band 2300 - 2690 MHz
areas where new subscribers Insertion Loss 0.2 dB*, 0.3 dB max
can contribute to revenue. Return Loss > 18 dB
Rejection 1710 - 2170 MHz 50 dB
Continuous Average Power 250 W
Intermod. (IM3), 2x43 dBm TX Carrier 160 dBc
MASS™ Environmental
Advantage
Operating Temperature Range -40° to +65°C | -40° to +149°F
Increases coverage Environmental ETS 300 019-1-4 Class 4.1E
more traffic & higher ARPU Ingress Protection IP67
Safety IEC/EN 62368-1
Increases capacity Electrical With Auto-Sense
more traffic & higher ARPU
Lightning Protection +/-5 kA 8/20 µs +/-5 kA 8/20 µs
DC Pass Current 3.0 A continous max. 2 A, drop max 2.4V
Reduces the cost
of network expansion AISG pass Yes
AISG RL > 12 dB
Minimizes AISG Loss < 1 dB
site acquisition issues Input Voltage Power 8-30 V Max 0.3W
Impedance 50 Ω 50 Ω
Mechanical Single Mount Dual Mount
Dimensions (WxHxD) 190x150x51 mm 190x150x94 mm
7.48x5.91x2.00 in 7.48x5.91x3.70 in
With Auto-Sense 190x150x62 mm 190x150x123 mm
7.48x5.91x2.44 in 7.48x5.91x4.84 in
Volume 1.5 l 2.7 l
With Auto-Sense 1.8 l 3.5 l
Weight gross/net 3.1 kg/2.6 kg | 6.8 lb/5.7 lb 5.3 kg/4.7 kg | 11.8 lb/10.3 lb
With Auto-Sense 3.6 kg/3.1 kg | 8.0 lb/6.9 lb 5.8 kg/5.2 kg | 12.9 lb/11.6 lb
Connectors See Selection Guide
Mounting Hose clamps or wall mount, (Supporter Pole Diameter: 40-140mm)
Colour NCS 1502-R (light grey)
Bracket Included
Shipping Information Single Mount Dual Mount
Carton Size 300x267x155 mm 300x267x200 mm
11.81x10.51x6.10 in 10.24x9.45x7.87 in
Carton Qty/Pallet 108 60
* typical
Selection Guide
Single Mount Dual Mount Connector (Long neck)
Block Diagram
MI-217nA MI-217n1 MI-217n2 MI-217n3 MI-217n4 MI-217n5 MI-217n6 MI-217n7
1800 2100 2300-2600 1800 2100 2300-2600 1800 2100 2300-2600 1800 2100 2300-2600 1800 2100 2300-2600 1800 2100 2300-2600 1800 2100 2300-2600
DC/ AISG
Auto-Sense
Mechanical Drawing
*This picture is showing MI-2170n *This picture is showing MI-2171n
Main Features
Compact, low weight
Low PIM
High reliability
Simple installation
Electrical Data
Frequency CH1: 1710~1880MHz
CH2: 1920~2180MHz
CH3: 2300~2690MHz
Return loss -18dB
Insertion loss 0.5dB
Isolation ≥ 50dB
Power handling 200W per port
Intermodulation (3rd order) -117dBm@2x20W
DC/AISG Bypass Auto sense
Impedance 50
Environmental Data
Operating temperature range -25°C to +65°C
Storage temperature range -40°C to +85°C
Relative humidity 5%- 95%
Applications IP68
QP-TQ4TE-067/7.0
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 1/2
BRW-DS-T-2272
Data Sheet
Mechanical Data
Dimension 168x146x105.5 (mm, excluding brackets and connectors)
Weight 4.8kg
Connectors type 4.3-10 female
Mounting Wall or pole
Packing 1pcs in box
Outline Drawing
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our
part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we
reserve the right to make changes judged to be necessary.
QP-TQ4TE-067/7.0
Draft Date Checker Approved Date Rev. Engineering change number Name Date
XQ.W 15/Apr/2022 Rex Joson 15/Apr/2022 0.1 XQ.W 15/Apr/2022
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 2/2
MI-757nn
MICRODATA Quadruplexer
TELECOM 700-800/900/1800/2100-2600 MHz
MASS™ Specifications
Microdata Advanced Site Solutions Port 1 (800) - Common
Frequency Band 694 - 862 MHz
With our expertise in site
system design we are able Insertion Loss 0.2 dB *, 0.5 dB max
to provide a solution for Return Loss, normal modes, all ports > 18 dB
any site sharing or upgrade Rejection 880 - 2690 MHz > 50 dB (>30 dB 900 RX)
scenario. Continuous Average Power 250 W, max 500 W combined on common port
Intermod. (IM3), 2x43 dBm TX Carrier -117 dBm
Our focus area is RF-filter Port 2 (900) - Common
based solutions including
Frequency Band 880 - 960 MHz
combiners, multi band TMAs,
Insertion Loss 0.2 dB *, 0.4 dB max
di-, tri- and quadruplexers.
Return Loss > 18 dB
Our product portfolio Rejection 790 - 862 MHz > 50 dB TX >30 dB RX
supports all frequencies Rejection 1710 - 2170 MHz 50 dB
for mobile communication Rejection 2300-2400 MHz 50 dB
bands ranging from 450 MHz Rejection 2500-2690 MHz 50 dB
to 6 GHz. Continuous Average Power 250 W, max 500 W combined on common port
Intermod. (IM3), 2x43 dBm TX Carrier -117 dBm
Site and network sharing
Port 3 (1800) - Common
makes it cost efficient to
reach sparsely populated Frequency Band 1710 - 1880 MHz
areas where new subscribers Insertion Loss, 1710 - 1880 MHz 0.2 dB *, 0.6 dB max
can contribute to revenue. Return Loss > 18 dB
Rejection 790 - 960 MHz & 1920 - 2690 MHz 50 dB
Continuous Average Power 250 W, max 500 W combined on common port
Intermod. (IM3), 2x43 dBm TX Carrier -117 dBm
MASS™ Port 4 (2100-2600) - Common
Advantage
Frequency Band 1920 - 2690 MHz
Increases coverage Insertion Loss, 1920 - 2690 MHz 0.2 dB*, 0.7 dB max
more traffic & higher ARPU Return Loss > 18 dB
Rejection 790 - 1880 MHz 50 dB
Increases capacity Continuous Average Power 250 W, max 500 W combined on common port
more traffic & higher ARPU
Intermod. (IM3), 2x43 dBm TX Carrier -117 dBm
Environmental
Reduces the cost
of network expansion Operating Temperature Range -40° to +65°C | -40 to +149°F
Environmental ETS 300 019-1-4 Class 4.1E
Minimizes Ingress Protection IP68
site acquisition issues Safety IEC/EN 62368-1
Electrical With Auto-Sense
DC By Pass 3A 2 A, drop max 2.4 V
AISG pass Yes
AISG RL >12 dB
AISG Loss < 1dB
Lightning Protection 10 kA 8/20 µs
Input Voltage Power 8-30 V max 0.3 W
Mechanical Single Mount Dual Mount
Dimensions (WxHxD) 267x160x58 mm 267x160x116 mm
10.5x6.3x2.3 in 10.5x6.3x4.6 in
With Auto-Sense 267x160x72 mm 267x160x138 mm
10.5x6.3x2.8 in 10.5x6.3x5.4 in
Volume 2.5 l 5.0 l
With Auto-Sense 3.0 l 5.8 l
Weight 4 kg | 8.82 lb 6 kg | 13.23 lb
Connectors See Selection Guide
Mounting(Supporter Pole Diameter: 40-140mm) Hose clamps or wall mount
Colour NCS 1502-R (light grey)
Bracket Included
Shipping Information Single Mount Dual Mount
All values in spec are subject to change without notice Page 1/2 MI-757nn_210331_C.pdf
Selection Guide
Connector (F)
7/16 4.3-10
Block Diagram
MI-757nA MI-757n1 MI-757n2 MI-757n3 MI-757n4 MI-757n5 MI-757n6
DC/ AISG
Auto-Sense 2100- 2100- 2100- 2100- 2100- 2100-
700-800 900 1800 2600 700-800 900 1800 2600 700-800 900 1800 2600 700-800 900 1800 2600 700-800 900 1800 2600 700-800 900 1800 2600
MI-757n1 Block Block Block Block MI-757nA.2 XOR XOR XOR XOR
Mechanical Drawing
The diagram is showing MI-7574A
All values in spec are subject to change without notice Page 2/2 MI-757nn_210331_C.pdf
Sheet 1 of 5
RD0812-H4-01
700-800/900/1800/2100-2600 MHz Dual Combiner with Auto BypassTM
Group Delay
Auto Bypass detects the presence of DC on the input ports of the combiner and connects the highest priority port on
which DC is present to the COMMON port according to a pre-programmed precedence table.
This functionality promotes flexibility in the choice of controlling base station and allows the controlling base station
to be changed without the need to swap combiners.
2 X X X DC PORT 4 - PORT 5
3 DC X X No DC PORT 1 - PORT 5
5 No DC No DC DC No DC PORT 3 - PORT 5
2 X X X DC PORT 9 - PORT 10
3 DC X X No DC PORT 6 - PORT 10
4 No DC DC X No DC PORT 7 - PORT 10
5 No DC No DC DC No DC PORT 8 - PORT 10
Auto Bypass path switching occurs when DC is detected for >500 ms. LEDs indicate from which port the DC/AISG
is provided. The quiescent current consumption is <=15 mA. The low quiescent current consumption of the unit
enables deployment in both CWA and AISG site configurations.
The Auto Bypass requires DC to be present in order to function correctly – it will not detect an AISG signal alone.
When more than one source is connected, the non-selected ports are seen as high impedance loads (>1 k ohm).
The operation of the auto bypass unit in combiner configuration is indicated by the LEDs as follows:
LED continuously ON: The port is powered, connected to the common port and provides the DC/AISG
path through the unit.
LED Blinking (10% ON/90% OFF): The port is powered but is low priority and not connected to the common port.
LED Blinking (50% ON/50% OFF): Indicates a fault on the common port. The LED associated with the port connected
to the common port at the point the fault occurred indicates the fault. All other
LEDs are OFF. The auto bypass unit must be powered down completely to reset
the unit.
The Auto Bypass functionality enables the combiner to be deployed in the field as a splitter with a transparent site
upgrade path for ALDs connected to the unit.
Auto Bypass path switching occurs when DC is detected for >500 ms. LEDs indicate to which ports the DC/AISG is
provided.
In splitter operation the unit detects malfunctions in the connected ALDs that result in excessive current and disables
the DC/AISG connection to the corresponding port thus protecting the system.
The operation of the auto bypass unit in splitter configuration is indicated by the LEDs as follows:
LED continuously ON: The common port is powered. The port indicated by the LED is connected to the
common port and provides a DC/AISG path.
All LEDs OFF: The common port is not powered. There is no DC/AISG connectivity through the
unit.
LED Blinking (50% ON/50% OFF): The port indicated by the LED is not connected to or has been disconnected from
the common port due to a s/c fault detected on the port (i.e. a fault in the connected
equipment has been detected at start-up or has developed during operation). There
is no DC/AISG connectivity through the unit on this path. To re-establish the
DC/AISG path the fault must be rectified and the auto bypass unit reset by cycling
common port power.
Main Features
Compact, low weight
Low PIM
High reliability
Simple installation
Electrical Data
Frequency CH1: 694~862MHz
CH2: 880~960MHz
CH3: 1710~1880MHz
CH4: 1920~2690MHz
Return loss -18dB
Insertion loss 0.5dB
Isolation ≥ 50dB
Power handling 200W per port
DC bypass Auto sense
Intermodulation (3rd order) -117dBm@2x20W
Impedance 50
Environmental Data
Operating temperature range -25°C to +65°C
Storage temperature range -40°C to +85°C
Relative humidity 5%- 95%
Applications IP68
Mechanical Data
Dimension 186 x 256 x 125 (mm, excluding brackets and connectors)
Weight 6.6 kg
Connectors type 4.3-10 female
Mounting Wall or pole
Packing 1pcs in box
QP-TQ4TE-067/7.0
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 1/2
BRW-DS-T-2273
Data Sheet
Outline Drawing
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our
part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we
reserve the right to make changes judged to be necessary.
QP-TQ4TE-067/7.0
Draft Date Checker Approved Date Rev. Engineering change number Name Date
XQ.W 15/Apr/2022 Rex Joson 15/Apr/2022 0.1 XQ.W 15/Apr/2022
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 2/2
E14F15P31
New 4.3-10 connectors for improved PIM performance and size reduction
dc/AISG blocking on all ports
Clam shell configuration
Product Classification
Product Type Quadplexer
General Specifications
Color Gray
Modularity 2-Twin
Dimensions
Height 88 mm | 3.465 in
Outline Drawing
Page 1 of 3
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: September 18, 2020
E14F15P31
Electrical Specifications
Impedance 50 ohm
Electrical Specifications
Sub-module 1|2 1|2 1|2 1|2
Branch 1 2 3 4
Port Designation PORT 1 1325- PORT 2 1920- PORT 3 2300- PORT 4 2500-
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: September 18, 2020
E14F15P31
1880MHz 2170MHz 2400MHz 2690MHz
Block Diagram
Mechanical Specifications
Wind Speed, maximum 240 km/h | 149.129 mph
Environmental Specifications
Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Volume 2.3 L
Page 3 of 3
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: September 18, 2020
MI-261nn
MICRODATA Quadruplexer
TELECOM 1800/2100/2300/2600
Specifications
Port 1 (1800) - Common
Frequency Band 1710 - 1880 MHz
Our focus area is RF-filter Insertion Loss, 2110 - 2170MHz < 0.2 dB*
based solutions including Return Loss > 18 dB
combiners, multi band TMAs, Rejection to other bands 50 dB
di-, tri- and quadruplexers. Continuous Average Power 250 W, 500 W total on common port
Intermod. (IM7), 2x43 dBm TX -117 dBm
Our product portfolio Carrier
supports all frequencies Port 3 (2300) - Common
for mobile communication Frequency Band 2300 - 2400 MHz
bands ranging from 450 MHz Insertion Loss < 0.2 dB*
to 6 GHz.
Return Loss > 18 dB
Rejection to other bands 50 dB
Site and network sharing
makes it cost efficient to Continuous Average Power 250 W, 500 W total on common port
reach sparsely populated Intermod. (IM7), 2x43 dBm TX -117 dBm
areas where new subscribers Carrier
can contribute to revenue. Port 4 (2600) - Common
Frequency Band 2500 - 2690 MHz
Insertion Loss, 2500 - 2690 MHz < 0.2 dB*
Return Loss > 18 dB
MASS™ Rejection to other bands 50 dB
Advantage Continuous Average Power 250 W, 500 W total on common port
Increases coverage Intermod. (IM3), 2x43 dBm TX -117 dBm
Carrier
more traffic & higher ARPU
Environmental
Increases capacity Operating Temperature Range -40° to +65°C | -40° to +149°F
more traffic & higher ARPU Environmental ETS 300 019-1-4 Class 4.1E
Ingress Protection IP67
Reduces the cost Safety IEC/EN 62368-1
of network expansion Electrical With Auto-Sense
Lightning Protection +/-5 kA 8/20 μs +/-5 kA 8/20 μs
Minimizes
DC Pass Current 3.0 A continous max. 2 A, drop max 2.4V
site acquisition issues
AISG pass Yes
MTBF 1 Mh min. 1 Mh min.
Input Voltage Power 8-30 V Max 0.3W
Mechanical Single Mount Dual Mount
Dimensions (WxHxD) 225x160x49 mm 225x160x89 mm
8.86x6.30x1.93 in 8.86x6.30x3.50 in
With Auto-Sense 225x160x63 mm 225x160x118 mm
8.86x6.30x2.48 in 8.86x6.30x4.65
Connectors See Selection Guide
Volume 1.7 l 2.9 l
All values in spec are subject to change without notice Page 1/2 MI-261nn_201110_C.pdf
Block Diagram
Mechanical Drawing
This picture is showing MI-2613n and MI-2614n
All values in spec are subject to change without notice Page 2/2 MI-261nn_201110_C.pdf
Sheet 1 of 3
RD0799-XX
1800 / 2100 / 2300 / 2600 MHz Dual Combiner
Options Table
The required RD0799-XX variant can be ordered using the following product variant table:
Variants
Connector Options:
To specify 7-16 connectors, please order RD0799-XX
To specify 4.3-10 connectors, please order RD0799-H4-XX
Group Delay
Product Classification
Product Type Diplexer
General Specifications
Color Gray
Modularity 8-Octa
Dimensions
Height 83 mm | 3.268 in
Outline Drawing
Page 1 of 4
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: June 29, 2022
E14F06P04
Electrical Specifications
Impedance 50 ohm
Electrical Specifications
Sub-module 1|2 1|2
1 2 Page 2 of 4
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: June 29, 2022
E14F06P04
Branch 1 2
Port Designation Port 2300-2400 Port 2570-2595
Block Diagram
Environmental Specifications
Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
3.9 L Page 3 of 4
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: June 29, 2022
E14F06P04
Volume 3.9 L
Page 4 of 4
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: June 29, 2022
RD0821-H4-XX
2300TDD/2600TDD 8-Way Combiner
2300TDD Paths
Passband See Variants Table Enables 8x8 MIMO systems in two
Insertion Loss <0.15 dB (typ) different TDD bands to share the
<0.20 dB (max) same feeder cables
Maximum Input Power: Peak Instantaneous 200 W
Maximum Input Power: Average 20 W Extremely low insertion loss
2600TDD Paths
Provides protection against co-
Passband See Variants Table
located 2600FDD systems
Insertion Loss <0.25 dB (typ)
<0.35 dB (max) -40°C to +65°C operating range
Attenuation of 2600FDD D/L Band >20dB (See Variants Table)
Maximum Input Power: Peak Instantaneous 200 W All ports present a short circuit at DC
Maximum Input Power: Average 20 W
Earth Stud M8
Sheet 1 of 2
RD0821-H4-XX
2300TDD/2600TDD 8-Way Combiner
RD0821-H4-01 shown
RD0821-H4-01 shown
Available Variants
2300TDD Path 2600TDD Path 2600FDD
Passband Passband Stopband
Main features
Compact, low weight
High Isolation,Low VSWR and Loss
High reliability
Low PIM
Multiple system, including 2300 and 2600
Electrical data
Frequency CH1:2300-2400 MHz
CH2:2500-2690 MHz
Return loss ≤ -18dB
Insertion loss 0.2 dB Typical / 0.5dB Maximum
Isolation (CH1-CH2) ≥ 20dB
Power handling 200W Average per port
Intermodulation ≤-117dBm@2x20W
Impedance 50 Ω
DC characteristic DC Stop
Environmental data
Operating temperature range -25°C to +65°C
Storage temperature range -40°C to +85°C
Relative humidity 5% - 85%
Applications IP68
QP-TQ4TE-067/ 7.0
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 1/3
Data Sheet
BRW-DS-T-2278
Mechanical data
Connectors type 4.3-10 female
BTS Ports 18 (16 RF ports and 2 CAL ports)
2300 9 (8 RF ports and 1 CAL ports)
2600 9 (8 RF ports and 1 CAL ports)
ANT Ports 9 (8 RF ports and 1 CAL ports)
Dimensions 340.6 x 139.6 x 86 (mm, excluding connectors and baskets)
Weight ≤5.5kg
Mounting Wall or pole
Packing 1pcs in box
Outline drawing
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on
our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our
products, we reserve the right to make changes judged to be necessary.
QP-TQ4TE-067/ 7.0
Draft Date Checker Approved Date Rev. Engineering Change Number Name Date
XQ.W 15/Apr/2022 Rex Joson 15/Apr/2022 0.1 XQ.W 15/Apr/2022
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 2/2
KA-3003
TRIPLEXER 1800-2100/2300/2600
The Kaelus KA-3003 is a bi-directional Triplexer, designed to combine or
split 1800-2100, 2300 and 2600 bands. The KA-3003 provides low
insertion loss and high return loss with excellent passive inter-modulation
performance in an extremely small and lightweight IP67 capable package
FEATURES
Enables antenna & coax sharing for 1800, 2100, 2300 and 2600
systems
Compact & lightweight
Low insertion loss & high return loss
Low passive IM performance
Single twin and dual twin models available
Hard Wired and DC Autosense versions available
TECHNICAL SPECIFICATIONS
BAND NAME 1800-2100 2300 2600
Passband 1710 - 2170MHz 2300 - 2400MHz 2500-2690MHz
Insertion loss 0.2dB typical, 0.3dB max 0.2dB typical, 0.3dB max 0.2dB typical, 0.35dB max
Return loss 20dB typical, 18dB minimum
Maximum input power 250W (average) * 250W (average) * 250W (average) *
Intermodulation products < -160dBc at 2 x 43dBm TX Carrier
Rejection 50dB minimum in 2300 and 2600 50dB minimum in 1800-2100 and 50dB minimum in 1800-2100 and
band 2600 band 2300 band
(*) Limited to 500W (average) combined power at the common port.
ELECTRICAL
Impedance 50Ohms
DC / AISG
DC/AISG path is factory configurable, see ordering information
Passband 0 – 3MHz
Insertion loss 1dB maximun
Return loss 12dB minimun
Input voltage range ± 30V
DC current rating 3A continuous
Compliance 3GPP TS 25.461
ENVIRONMENTAL
For further details of environmental compliance, please contact Kaelus.
Temperature range -40ºC to +70ºC | -40ºF to +158ºF
Ingress protection IP67
Lightning protection 5kA maximum (8/20us)
MTBF > 1,000,000 Hours
Operation: ETSI EN 300 019 class 4.1E
Storage: ETS 300 019-1-1 class 1.3E
Compliance
Transport: ETS 300 019-1-2 class 2.3
RoHS
MECHANICAL
Dimensions H x D x W 150 x 95 x 190mm | 5.89 x 3.73 x 7.48in
Weight 2.6kg | 5.7lbs
Finish Powder Coated, light grey, NCS 1502-R
Connectors 4.3-10 (F) long neck
Mounting Pole/wall bracket supplied with two metal clamps for 45-178 mm diameter poles
ORDERING INFORMATION
DC/AISG
PART NUMBER CONFIGURATION OPTIONAL FEATURES CONNECTORS
CONFIGURATION
FIXED DC
KA-3003-2032 2 in / 6 out FACTORY 4.3-10 (F) DC TO ALL
CONFIGURABLE
Note: DC autosense versions available, contact Kaelus for information
Sheet 1 of 3
RD0846-XX - Preliminary
2100 / 2300 / 2600 MHz Dual Combiner
Options Table
The required RD0846-XX variant can be ordered using the following product variant table:
Variants
Connector Options:
To specify 7-16 connectors, please order RD0846-XX
To specify 4.3-10 connectors, please order RD0846-H4-XX
Group Delay
Main Features
Compact, low weight
Combiner
Contain WCDMA, LTE2300,2600 band
Low PIM
Simple installation
Double units
Electrical Data
Frequency CH1: 1920~2180MHz
CH2: 2300~2400MHz
CH3: 2500~2690MHz
Return loss -18dB
Insertion loss 0.5dB
Isolation(CH1-CH2-CH3) ≥50 dB
Power handling 250 W (Average)
Intermodulation (3rd order) -117dBm@2x20W
DC characteristic DC Stop
Impedance 50
Environmental Data
Operating temperature range -30°C to +65°C
Storage temperature range -40°C to +85°C
Relative humidity 5% - 95%
LightningProtection 10KA,8/20us
Applications IP68
QP-TQ4TE-067/7.0
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 1/2
Data Sheet
BRW-DS-T-2274
Mechanical Data
Dimensions 151 x 140 x 105 (mm, excluding connectors and brackets)
Weight 2.8kg
Connectors type 4.3-10 female (Long neck)
Number of input ports 6
Number of output ports 2
Mounting Wall or pole
Installation hoop 40-135mm
Packing 1pcs in box
Outline Drawing
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our
part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we
reserve the right to make changes judged to be necessary.
QP-TQ4TE-067/7.0
Draft Date Checker Approved Date Rev. Engineering change number Name Date
XQ.W 15/Apr/2022 Rex Joson 15/Apr/2022 0.1 XQ.W 15/Apr/2022
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 2/2
E14F06P08
Product Classification
Product Type Diplexer
General Specifications
Modularity 4-Quad
Dimensions
Height 71 mm | 2.795 in
Depth 61 mm | 2.402 in
Dimension Drawing
Page 1 of 4
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: November 14, 2022
E14F06P08
Electrical Specifications
Sub-module 1|2 1|2
1 2 Page 2 of 4
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: November 14, 2022
E14F06P08
Branch 1 2
Port Designation 80-2690 3300-5925
License Band APT 700, Band Pass LAA 5000, Band Pass
EDD 800, Band Pass TDD 3500, Band Pass
CEL 850, Band Pass
CEL 900, Band Pass
DCS 1800, Band Pass
IMT 2100, Band Pass
TDD 2300, Band Pass
TDD 2600, Band Pass
IMT 2600, Band Pass
Block Diagram
Mechanical Specifications
Wind Loading @ Velocity, frontal 10.0 N @ 150 km/h (2.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 4.0 N @ 150 km/h (0.9 lbf @ 150 km/h)
Environmental Specifications
Operating Temperature -40 ºC to +65 ºC (-40 ºF to +149 ºF)
Page 3 of 4
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: November 14, 2022
E14F06P08
Packaging and Weights
Volume 1L
Page 4 of 4
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: November 14, 2022
MI-707nn
MICRODATA Diplexer 2300-2690/3400-3800 MHz
TELECOM
MASS™ Specifications
Microdata Advanced Site Solutions Low Band
Frequency Band 2300 - 2690 MHz
With our expertise in site
system design we are able Insertion Loss < 0.15 dB typ, < 0.20 dB max
to provide a solution for Return Loss > 18 dB min
any site sharing or upgrade Continuous Average Power 100 W
scenario. Isolation High Band > 50 dB min
Intermodulation, 2x43 dBm TX Carrier min 160 dBc (-117 dBm)
Our focus area is RF-filter High Band
based solutions including
Frequency Band 3400 - 3800 MHz
combiners, multi band TMAs,
Insertion Loss < 0,15 dB typ, < 0.20 dB max
di-, tri- and quadruplexers.
Return Loss > 18 dB min
Our product portfolio Continuous Average Power 100 W
supports all frequencies Isolation Low Band > 50 dB min
for mobile communication Intermodulation, 2x43 dBm TX Carrier min 160 dBc (-117 dBm)
bands ranging from 450 MHz Environmental
to 6 GHz. Operating Temperature Range -40 to +65°C | -40 to +149°F
Operation ETS 300 019-1-4 Class 4.1E
Site and network sharing
Storage ETS 300 019-1-1 Class 1.2
makes it cost efficient to
reach sparsely populated Ingress Protection IP67
areas where new subscribers Electrical
can contribute to revenue. Lightning Protection 5 kA 8/20 µs
Mechanical 4:2 8:4
Dimensions (WxHxD) excl connectors 172x97x37 mm 172x97x68 mm
8.3x4.2x1.6 in 3.74 x6.77x2.68 in
MASS™ Volume 0.6 l 1.15 l
Advantage Weight (including brackets) 1.3 kg | 2.87 lb 2.5 kg | 5.51 lb
Minimizes
site acquisition issues
Selection Guide
Connector
4.3-10 (F)
4:2 MI-70731
Mount
8:4 MI-70741
All values in spec are subject to change without notice Page 1/2 MI-707nn_200527_C.pdf
2300-2690 3400-3800
Mechanical Drawing
All values in spec are subject to change without notice Page 2/2 MI-707nn_200527_C.pdf
Main features
Compact, low weight
High Isolation,Low VSWR and Loss
High reliability
Low PIM
Multiple system, including 2600 and 3500
Electrical data
Frequency CH1:2300-2690 MHz
CH2:3400-3800 MHz
Return loss ≤ -18dB
Insertion loss 0.15 dB Typical / 0.5dB Maximum
Isolation (CH1-CH2) ≥ 20dB
Power handling 200W Average per port
Intermodulation ≤-117dBm@2x20W
Impedance 50 Ω
DC characteristic DC Stop
Environmental data
Operating temperature range -25°C to +65°C
Storage temperature range -40°C to +85°C
Relative humidity 5% - 85%
Applications IP68
QP-TQ4TE-067/ 7.0
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 1/3
Data Sheet
BRW-DS-T-2279
Mechanical data
Connectors type 4.3-10 female
BTS Ports 18 (16 RF ports and 2 CAL ports)
2600 9 (8 RF ports and 1 CAL ports)
3500 9 (8 RF ports and 1 CAL ports)
ANT Ports 9 (8 RF ports and 1 CAL ports)
Dimensions 340.6 x 139.6 x 86 (mm, excluding connectors and baskets)
Weight ≤5.5kg
Mounting Wall or pole
Packing 1pcs in box
Outline Drawing
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our
part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we
reserve the right to make changes judged to be necessary.
QP-TQ4TE-067/ 7.0
Draft Date Checker Approved Date Rev. Engineering Change Number Name Date
XQ.W 15/Apr/2022 Rex Joson 15/Apr/2022 0.1 XQ.W 15/Apr/2022
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 2/2
E14F05P81
New 4.3-10 connectors for improved PIM performance and size reduction
Industry leading PIM performance
Designed for network modernization application, introduction of LTE700 and LTE800 on
existing site
dc/AISG pass-through on high frequency ports
Twin configuration
Product Classification
Product Type Diplexer
General Specifications
Product Family CBC789
Color Gray
Modularity 2-Twin
Dimensions
Height 165 mm | 6.496 in
Page 1 of 4
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: September 18, 2020
E14F05P81
Outline Drawing
Electrical Specifications
Impedance 50 ohm
License Band, Band Pass APT 700 | CEL 900 | EDD 800 | LMR 800 | USA 700
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: September 18, 2020
E14F05P81
Lightning Surge Current Waveform 8/20 waveform
Electrical Specifications
Sub-module 1|2 1|2
Branch 1 2
Port Designation PORT 1 703-778 PORT 2 790-862
License Band APT 700, Band Pass EDD 800, Band Pass
USA 700, Band Pass LMR 800, Band Pass
Block Diagram
Environmental Specifications
Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: September 18, 2020
E14F05P81
Ingress Protection Test Method IEC 60529:2001, IP67
Volume 3.9 L
Regulatory Compliance/Certifications
Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
Page 4 of 4
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: September 18, 2020
RD0877-H4-XX
700/800-900 MHz Dual Combiner with Auto BypassTM
GENERAL
Industry leading Auto BypassTM feature
Return loss on all ports >18 dB
Sheet 1 of 3
RD0877-H4-XX
700/800-900 MHz Dual Combiner with Auto BypassTM
PORT 3 PORT 6
COMMON COMMON
DC Autosense
Variant 700 Passband 800-900 Passband
Priority
Group Delay
RD0877 Frequency Band (MHz) Typical Group Delay (ns)
Group Delay Start Stop Mid-band Band-edge
DC Autosense detects the presence of DC on the input ports of the combiner and connects the highest priority
port on which DC is present to the COMMON port according to a pre-programmed priority table. Path switching
occurs when DC is detected for >500 ms. LEDs indicate from which port the DC/AISG is provided.
This functionality promotes flexibility in the choice of controlling base station and allows the controlling
base station to be changed without the need to swap combiners.
DC Autoforward detects the presence of DC on the common port of the combiner and establishes DC/AISG
paths to all output ports connected to ALDs requiring DC/AISG connectivity. Multiple output ports can be
supplied simultaneously with the DC/AISG feed.
Path switching occurs when DC is detected for >500 ms. LEDs indicate to which ports the DC/AISG is provided.
In addition the unit detects malfunctions in the connected ALDs that result in excessive current and disables
the DC/AISG connection to the corresponding port thus protecting the system.
This functionality enables the combiner to be deployed in the field as a splitter with a transparent site upgrade
path for ALDs connected to the unit.
EMAIL FOR MORE DETAILS: INFO@RADIODESIGN.EU
Sheet 3 of 3 All specifications are subject to change without notice
Data Sheet
BRW-DS-T-2276
Main features
Dual-band combiner
Compact, low weight
High reliability
Low PIM
Simple installation
Electrical data
Port1 Port2
Frequency 703~788MHz 796~960MHz
Return loss ≤-18dB ≤-18dB
Insertion loss 0.2dB Typical/0.5 dB Maximum 0.2dB Typical/0.5 dB Maximum
Isolation ≥50dB
Intermodulation ≤-117dBm@2x20W
Power handling 300W average per port
DC/AISG Bypass Auto sense
Impedance 50
Environmental data
Operating temperature range -25°C to +65°C
Storage temperature range -40°C to +85°C
Relative humidity 5%-95%
Applications IP68
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 1/2
Data Sheet
BRW-DS-T-2276
Mechanical data
Dimensions 250 x190 x111 (mm, excluding brackets and connectors)
Weight ≤6.5 kg
Connectors type 4.3-10 female
Mounting Wall or pole
Packing 1pcs in box
Outline drawing
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our
part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we
reserve the right to make changes judged to be necessary.
Draft Date Checker Approved Date Rev. Engineering Change Number Name Date
XQ.W 15/Apr/2022 Rex Joson 15/Apr/2022 0.1 XQ.W 15/Apr/2022
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 2/2
STX42342T-43 | E14F10P68
Product Classification
Product Type Triplexer
General Specifications
Color Gray
Modularity 2-Twin
Dimensions
Height 110 mm | 4.331 in
Depth 86 mm | 3.386 in
Outline Drawing
Page 1 of 4
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: March 18, 2022
STX42342T-43 | E14F10P68
Electrical Specifications
Impedance 50 ohm
License Band, Band Pass APT 700 | AWS 1700 | CEL 850 | CEL 900 | DCS 1800 | EDD 800 | IMT
2100 | IMT 2600 | LMR 750 | LMR 800 | LMR 900 | PCS 1900 | TDD
3500 | USA 600 | USA 700 | USA 750 | WCS 2300
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: March 18, 2022
STX42342T-43 | E14F10P68
Electrical Specifications
Sub-module 1|2 1|2 1|2
Branch 1 2 3
Port Designation 380-2200 2300-2700 3300-4200
License Band PCS 1900, Band Pass TDD 2300, Band Pass TDD 3500, Band Pass
USA 700, Band Pass IMT 2600, Band Pass
USA 750, Band Pass
AWS 1700, Band Pass
USA 600, Band Pass
AWS 2000, Band Pass
CEL 850, Band Pass
CEL 900, Band Pass
DCS 1800, Band Pass
IMT 2100, Band Pass
Block Diagram
Page 3 of 4
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: March 18, 2022
STX42342T-43 | E14F10P68
Environmental Specifications
Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Volume 1.1 L
Page 4 of 4
©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: March 18, 2022
Data Sheet
BRW-DS-T-2277
Main Features
Compact, low weight
Combiner
Contain DCS&WCDMA, LTE2300&2600,B41 band
Low PIM
Simple installation
Double units
Electrical Data
Frequency CH1: 1710~2170MHz
CH2: 2300~2690MHz
CH3: 3400~3800MHz
Return loss -18dB
Insertion loss 0.5dB
Isolation(CH1-CH2-CH3) ≥50 dB
Power handling 250 W (Average)
Intermodulation (3rd order) -117dBm@2x20W
DC characteristic DC Stop
Impedance 50
Environmental Data
Operating temperature range -30°C to +65°C
Storage temperature range -40°C to +85°C
Relative humidity 5% - 95%
LightningProtection 10KA,8/20us
Applications IP68
QP-TQ4TE-067/7.0
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 1/2
Data Sheet
BRW-DS-T-2277
Mechanical Data
Dimensions 180 x 162 x 106 (mm, excluding connectors and brackets)
Weight 4.0kg
Connectors type 4.3-10 female (Long neck)
Number of input ports 6
Number of output ports 2
Mounting Wall or pole
Installation hoop 40-135mm
Packing 1pcs in box
Outline Drawing
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our
part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we
reserve the right to make changes judged to be necessary.
QP-TQ4TE-067/7.0
Draft Date Checker Approved Date Rev. Engineering change number Name Date
XQ.W 15/Apr/2022 Rex Joson 15/Apr/2022 0.1 XQ.W 15/Apr/2022
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 2/2
E14R00P55
Product Classification
Product Type 2-BTS:2-ANT (Uniplex) | Tower mounted amplifier
General Specifications
Color Gray
Modularity 2-Twin
Dimensions
Height 280 mm | 11.024 in
Depth 98 mm | 3.858 in
Outline Drawing
Page 1 of 4
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: December 15, 2020
E14R00P55
Electrical Specifications
License Band, LNA DCS 1800 | IMT 2100
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: December 15, 2020
E14R00P55
Protocol AISG 2.0
Electrical Specifications
Sub-module 1|2 1|2
Branch 1 1
Port Designation ANT ANT
License Band DCS 1800, LNA IMT 2100, LNA
Return Loss, typical, dB 20 20
Return Loss - Bypass Mode, typical, dB 16 16
Block Diagram
Page 3 of 4
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: December 15, 2020
E14R00P55
Environmental Specifications
Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Volume 4.8 L
* Footnotes
License Band, LNA License Bands that have RxUplink amplification
Page 4 of 4
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: December 15, 2020
MI-127
TMA TWIN 1800/2100
Designed to be deployed in collocated 1800, 2100 systems, the Kaelus MI-
127 enhances cell uplink coverage in 1800, 2100 through improved system
noise figure, thereby saving operational and capital expenditure.
TECHNICAL SPECIFICATIONS
BAND NAME 1800 2100
DOWNLINK
Passband 1805 - 1880MHz 2110 - 2170MHz
Insertion loss 0.5dB typical 0.3dB typical
Return loss 20dB typical, 18dB minimum
Maximum input power 200W (average) 200W (average)
Intermodulation products -160dBc in RX band at ANT -168dBc in RX band at ANT
UPLINK
Passband 1710 - 1785MHz 1920 - 1980MHz
Gain 12dB
Return loss 16dB
Bypass return loss 14dB
Bypass loss 2dB typical 2.2dB typical
Noise figure 1.4dB typical 1.3dB typical
Output IP3 25dBm typical
Maximum input power with no 12dB typical
damage
ELECTRICAL
Impedance 50Ohms
ENVIRONMENTAL
For further details of environmental compliance, please contact Kaelus.
Temperature range -40ºC to +65ºC | -40°F to +149°F
Ingress protection IP67
Lightning protection IEC61312-1, RF: ±5kA (8/20us), AISG: ±2.5kA (8/20us)
MTBF >1,000,000 hours
EMC: EN 301 489-8
Compliance Safety: IEC/EN 62368-1
Operation: ETSI EN 300 019-1-4 class 4.1E
Storage: ETS 300 019-1-1 class 1.2
MECHANICAL
Dimensions H x D x W 224 x 109 x 209 mm | 8.8 x 4.3 x 8.21in (excluding brackets and connectors)
Weight 6.7kg | 14.8lbs
Finish Powder coated, NCS 1502-R
Connectors See ordering information
Mounting Pole/wall bracket using two metal clamps, suits 40-140mm diameter poles
SHIPPING INFORMATION
Carton size 360 x 270 x 180mm │ 14.7 x 10.63 x 7.09in
Gross weight (including
7.5kg │ 16.5lb
packaging)
Carton Qty / Pallet 48
ORDERING INFORMATION
PART NUMBER CONFIGURATION OPTIONAL FEATURES CONNECTORS AISG MODE
7/16 (F) COMMON MODE
MI-12751 TWIN, 2 in / 2 out BASE MODEL
1xAISG ONETWO (*)
7/16 (F) COMMON MODE
MI-12752 TWIN, 2 in / 2 out BASE MODEL
1xAISG TWOTWO (**)
7/16 (F)
MI-12756 TWIN, 2 in / 2 out BASE MODEL INDEPENDENT
2xAISG
4.3-10 (F) COMMON MODE
MI-12731 TWIN, 2 in / 2 out BASE MODEL
1xAISG ONETWO (*)
4.3-10 (F) COMMON MODE
MI-12732 TWIN, 2 in / 2 out BASE MODEL
1xAISG TWOTWO (**)
Tx Power Handling: Peak Instantaneous 1000 W (1800 MHz) Supports use with higher DC Voltage
(Typical) 1000 W (2100 MHz) BTS Platforms
Tx Power Handling: Average (typical) 200 W (1800 MHz)
200 W (2100 MHz) Retains full system functionality
from -40°C to +65°C
Passive Intermodulation @ ANT Ports <-110 dBm (2x43 dBm carriers)
Receive Filter design ensures
AISG path AISG2.0/3GPP Release 8 compliant operation when deployed with
broadband antennas
Power Consumption (AISG mode) <3 W
DC Power Supply 8.5-30 V (CWA mode) Very low Noise Figure overcomes
10-30 V (AISG mode) feeder losses and enhances site
coverage
RF Connectors (long neck) 7-16 or 4.3-10 Female
Highly selective filters improve TX-
Mounting (Stainless Steel jubilee clips included) Pole (Ø 40-Ø 160 mm) or Wall.
RX isolation and reduce noise and
Lightning Protection (all ports) ±3 kA, 10/350 μs pulse interference
(between centre conductor & shield)
LNA By-pass paths incorporated as
Ingress Protection (unmated) IP67 standard, improving system
reliability
Mean Time Between Failure >500,000 hours
Sheet 1 of 3
RD0448-XX
1800/2100 MHz Dual TMA
Options
* AISG Mode option enables Dual Band MHA’s to be represented in different formats depending upon the BTS deployed
2sn - 2su: Two separate devices are represented for the MHA [high band/low band], each with two subunits [main/div]
1sn - 4su: One device represents the MHA [high band/low band], with four subunits [main HB, div HB, main LB, div LB]
1sn - 2su LB: One device represents the MHA [Low Band frequencies reported], with two subunits [main/div]
1sn - 2su HB: One device represents the MHA [High Band frequencies reported], with two subunits [main/div]
1sn - 2su WB: One device represents the MHA [Band Limit frequencies reported], with two subunits [main/div]
Connector Options:
To specify 7-16 connectors, please order RD0448-XX
To specify 4.3-10 connectors, please order RD0448-H4-XX
Group Delay
ELECTRICAL SPECIFICATIONS
Powering and control in AISG mode DC: via BTS1, BTS2, or both. AISG: via BTS1 or BTS2
Powering and control in DC mode DC: via BTS1 and BTS2
Dimensions (H x W x D) 231 x 201 x 68 mm (without connectors)
Weight 2.8 kg approx.
RF connectors 2x ANT 4.3-10 (female), 2x BTS 4.3-10 (female)
RET connector 1x AISG female 8 pin circular (IEC 60130-9)
Grounding stud M8
Block diagram
ORDERING
Public. NSN is a trademark of Nokia Solutions and Networks. Nokia is a registered trademark of Nokia Corporation. Other product names mentioned in this document may be
trademarks of their respective owners, and they are mentioned for identification purposes only. Any information or statements concerning the suitability, capacity, fitness for
purpose or performance of the Product are given solely on an “as is” and “as available” basis in this document, and Nokia Solutions and Networks reserves the right to change
any such information and statements without notice. ©2013 Nokia Solutions and Networks. All rights reserved.
Smart Bias Tee
617 – 2700 MHz
4.3-10 connectors
The Smart Bias Tee combines the performance of a standard Bias Tee with
the function of an additional modem (AISG standard) in order to provide Port 1
either DC voltage as well as remote control signals via an RF feeder cable to 78211592 BTS
a TMA or RCU.
The Smart Bias Tee provides low RF signal insertion loss from port 1 to port
Port 2
2 and vice versa. The measures taken to protect against static discharge
Feeder
and lightning ensure a high level of reliability and operational safety.
• 78211592:
+8 ... 32 VDC (DC on pin6) version for use near the BTS, in order to
feed-in DC voltage and RCU control signals into a feeder cable
• 78211593: Port 1
78211593
+8 ... 32 VDC (DC on pin6) version for use near the antenna, in order to Antenna
control an RCU (only required if no TMA is in use)
Port 2
Feeder
Abbreviations:
RCU = Remote Control Unit for remote electrical control of antenna tilt
BTS = Base Transceiver Station
TMA = Tower Mounted Amplifier
AISG = Antenna Interface Standards Group
Port 1 = Port for BTS or for Antenna
Port 2 = Port for Feeder Cable
Port DC/ = Port for DC voltage and Remote Control Unit signals
RCU
Technical Data
Input power
Port 1 or Port 2 W < 500 (617 – 2700 MHz)
Port DC/RCU < 2.5 A / +8 ... +32 VDC
Power consumption W Typically 0.6
Lightning protection kA 3, 10/350 μs pulse
Intermodulation products dBc < – 160 (3rd order; with 2 x 20 W)
Temperature range °C | °F –40 ... +60 | –40 ... +140
Modem carrier frequency MHz 2.176
Application Indoor or outdoor (IP 66)
Weight kg | lb 0.4 | 1.0
Dimensions (w x h x d) mm | in 81 x 81 x 42 | 3.2 x 3.2 x 1.6
Packing size (w x h x d) mm | in 167 x 102 x 86 | 6.6 x 4.0 x 3.4
Port 1
(Antenna)
78211593
78211592 78211592
Port 1
(BTS)
Pin connections:
78211592 78211593
Subject to alteration.
936.0000675a
Dimensional drawings:
78211592
78211593
Subject to alteration.
936.0000675a
Please note:
The Smart Bias Tees are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E and have passed environmental tests as recommended in
ETS 300 019-2-4.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
No lateral pressure may be placed on the Smart Bias Tee when mounting directly on an antenna.
MASS™ Specifications
Microdata Advanced Site Solutions Electrical
Frequency range 555 - 3800 MHz
With our expertise in site
system design we are able IL 0.1 dB typ
to provide a solution for Min RL 20 dB
any site sharing or upgrade Max RF power 750 W
scenario. Peak RF power 5000 W
Max DC current 2.7 A
Our focus area is RF-filter Max voltage drop 1V
based solutions including
Max intermodulation -117 dBm @2x43 dBm
combiners, multi band TMAs,
Min isolation RF - DC 65 dB
di-, tri- and quadruplexers.
Modem frequency 2.176 MHz
Our product portfolio Environmental
supports all frequencies Temperature -40 °C to +65 °C | -40 °F to +149°F
for mobile communication Ingress protection IP 67
bands ranging from 450 MHz Operation ETS 300 019-1-4 Class 4.1E
to 6 GHz. Lightning protection 5 kA 8/20 µs
3 kA 10/350 µs
Site and network sharing
makes it cost efficient to Miscellaneous
reach sparsely populated EMC EN 301 489-50
areas where new subscribers Safety Standards EN 60950
can contribute to revenue. Mechanical
Weight 0.4 kg | 0.88 lb
Size (WxHxD) 61x83x48 mm | 2.40x3.27x1.89 in
Connectors
MASS™ BTS-Side - 4.3-10 F (DC+AISG)
Advantage
ANT-Side - 4.3-10 M
Increases coverage
more traffic & higher ARPU AISG 8-pin circular F (IEC 60130-9)
Pin Function
Increases capacity 3 RS485-B
more traffic & higher ARPU
5 RS485-A
Reduces the cost 6 9-30 VDC
of network expansion
7 DC return (ground)
Block Diagram
Mechanical Drawing
Main features
Connector definition
Connector data
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 1/2
Data Sheet
BRW-DS-x-1983
Electrical data
Frequency 694-2700MHz
VSWR 1.25
Insertion loss 0.3dB
Power consumption 0.6W typical
DC isolation
Port1 – Port2 >60dB
Port1 – Port DC/AISG >60dB
Port2 – Port DC/AISG 0dB
Power handling
Port1 or Port2 200W AVG, 2000W Peak
Port DC/AISG 2.5A / +10~+30VDC
Intermodulation (3rd order) -117dBm@2x20W
Modem communication 3GPP TS 25.461
Impedance 50
Environmental data
Mechanical data
Dimension 124×70×56mm
Weight 0.65kg
Connectors type
Port1 4.3-10
Port2 4.3-10
Port DC/AISG 8-pin
Packing 1pcs in box
QP-TQ4TE-014/ 4.0
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 2/2
Data Sheet
BRW-DS-x-1983
Outline Drawing
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on
our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our
products, we reserve the right to make changes judged to be necessary.
QP-TQ4TE014/ 4.0
Draft Date Checker Approved Date Rev. Engineering Change Number Name Date
XQ.W 21/Mar/18 CY.X Joson 22/Mar/18 0.1 XQ.W 22/Mar/18
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 3/2
DESCRIPTION: CS-IMF 26 RJ 2575-2615 46dB DC
Document version: 00
Change number:
Document issue date: 6 May 2021 Page 1 of 3
DESCRIPTION: CS-IMF 26 RJ 2575-2615 46dB DC
BTS 1 ANT 1
BTS 2 ANT 2
ELECTRICAL SPECIFICATION
TX Band
Frequency Band 2620 to 2690 MHz
Impedance 50 Ω
Insertion Loss 0.30 dB Typ / 1.90 dB Max
Return Loss BTS port 20 dB Typ / 18 dB Min
Return Loss ANT port 20 dB Typ / 18 dB Min
Group Delay 10 ns Typ / 130 ns Max
Group Delay variation 30 ns Typ / 120 ns Max
Group Delay variation over 5 MHz band 20 ns Typ / 90 ns Max
IMD in RX band ANT port (2 CW tones +43 dBm each) -110 dBm
Input TX RMS Power (CW tone, each module) 100 W Max
Input TX Peak Power (LTE FDD TM 3.1 5 MHz tone, each module)1 1000 W Max
RX Band
Frequency Band 2500 to 2570 MHz
Impedance 50 Ω
Insertion Loss 0.30 dB Typ / 1.75 dB Max
Return Loss BTS port 20 dB Typ / 18 dB Min
Return Loss ANT port 20 dB Typ / 18 dB Min
Group Delay 10 ns Typ / 130 ns Max
Group Delay variation 30 ns Typ / 120 ns Max
Group Delay variation over 5 MHz band 20 ns Typ / 90 ns Max
Stop Band
Frequency band 2575 to 2615 MHz
Rejection 48 dB Typ / 46 dB Min
Inter-module isolation
Frequency band 2500 to 2570 MHz
2575 to 2615 MHz
2620 to 2690 MHz
Isolation 65 dB Typ / 60 dB Min
DC/AISG TRANSPARENCY
Frequency AISG 2.176 MHz
Impedance 50 Ω
Insertion Loss (max current, min voltage) 0.1 dB Typ / 0.2 dB Max
Return Loss (max current, min voltage) 20 dB Typ / 18 dB Min
DC bypass BTS port to ANT port
Current single path 1.5 A Max
DC voltage bypass 0 – 35 V
1
Sea level at ambient temperature, COM port 50 loaded
Document version: 00
Change number:
Document issue date: 6 May 2021 Page 2 of 3
DESCRIPTION: CS-IMF 26 RJ 2575-2615 46dB DC
MECHANICAL SPECIFICATION
RF Connectors 4.3/10 F (Neck > 25 mm)
RF Connectors Configuration In-line
Weight 5.8 kg
Weight without mounting brackets 5.2 kg
Volume without connectors and mounting brackets 3.6 L
Dimensions without connectors and mounting brackets 147 x 273 x 91 mm (+/- 1 mm)
Outside finish RAL7047
Product Configuration Clam shell of single modules
Mounting option Wall / Pole (Ø 43 to 122 mm)
Mounting orientation Any
Ground screw M5
PACKAGING SPECIFICATION
Single box Ref. ETSI EN 300 019-2-2 class T2.2
ENVIRONMENTAL SPECIFICATION
Ambient Operation Temperature Range -40 to 65° C
Category Outdoor (ref. ETSI EN 300 019-1-4)
Wind Speed 42 m/s (150 km/h) Max
IP Class IP67
Lightning protection any port[1] 10 kA, 8/20 us pulse
Corrosion resistance Ref. IEC 60068-2-11; ASTM B-117,
28 days; connectors mated
RELIABILITY SPECIFICATION
MTBF (Telcordia SR-332 @ 25°C ambient) 1000000 hours Min
Lifetime 10 years Min
[1]
Tested with ports short circuited
Document version: 00
Change number:
Document issue date: 6 May 2021 Page 3 of 3
Data Sheet
BRW-DS-T-2280
Main features
Electrical data
Frequency 2500-2570MHz / 2620-2690MHz
Return loss -18dB
Insertion loss 1.0dB typical
Rejection ≥30 dB @ 2575-2615MHz
Power handling 100W (Average)
Intermodulation (3rd order) -117dBm@2x20W
DC Characteristic DC Stop
Impedance 50
Environmental data
Applications IP68
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 1/2
Data Sheet
BRW-DS-T-2280
Mechanical data
Dimension 150 x145 x83 (mm, excluding brackets and connectors)
Weight 3.5kg
Connectors type 4.3-10 female
Mounting Wall or pole
Packing 1pcs in box
Outline Drawing
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our
part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we
reserve the right to make changes judged to be necessary.
QP-TQ4TE067/ 7.0
Draft Date Checker Approved Date Rev. Engineering Change Number Name Date
XQ.W 15/Apr/2022 Rex Joson 15/Apr/2022 0.1 XQ.W 15/Apr/2022
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 2/2
DESCRIPTION: 4X-IMF 2575-2615 RJ 26 38dB
Document version:
Change number:
Document issue date: Page 1 of 3
DESCRIPTION: 4X-IMF 2575-2615 RJ 26 38dB
ELECTRICAL SPECIFICATION
TX/RX Band
Frequency Band 2575 to 2615 MHz
Impedance 50 Ω
Insertion Loss 0.5 dB Typ / 1.3 dB Max
Insertion Loss ripple 0.2 dB Typ / 0.9 dB Max
Insertion Loss ripple over 5 MHz band 0.3 dB Typ / 0.7 dB Max
Return Loss BTS port 20 dB Typ / 18 dB Min
Return Loss ANT port 20 dB Typ / 18 dB Min
Group Delay 55 ns Typ / 110 ns Max
Group Delay variation 30 ns Typ / 70 ns Max
Group Delay variation over 5 MHz band 15 ns Typ / 50 ns Max
IMD in any band ANT port (2 CW tones +43 dBm each) -99 dBm Typ / -97 dBm Max
Input TX RMS Power (CW tone, each module) 250 W Max
Input TX Peak Power (CW tone, each module)1 1000 W Max
Stop Band
Frequency band 2500 to 2570 MHz
2620 to 2690 MHz
Rejection 39 dB Typ / 38 dB Min
Inter-module isolation
Frequency band 2575 to 2615 MHz
Isolation 45 dB Typ / 40 dB Min
Frequency band 2500 to 2570 MHz
2620 to 2690 MHz
Isolation 65 dB Typ / 60 dB Min
DC/AISG TRANSPARENCY
No DC/AISG bypass
Any port DC impedance Grounded
MECHANICAL SPECIFICATION
RF Connectors 4.3-10 F (Neck > 25 mm)
RF Connectors Configuration In-line
Weight 6.8 kg
Weight without mounting brackets 6.3 kg
Document version:
Change number:
Document issue date: Page 2 of 3
DESCRIPTION: 4X-IMF 2575-2615 RJ 26 38dB
PACKAGING SPECIFICATION
Single box Ref. ETSI EN 300 019-2-2 class T2.2
ENVIRONMENTAL SPECIFICATION
Category Outdoor (ref. ETSI EN 300 019-1-4)
Ambient Operating Temperature Range -40 to 55 °C
Wind Speed 55 m/s (200 km/h) Max
IP Class IP67, connectors unmated
Lightning protection any port 5 kA, 8/20 us pulse
(ref. IEC 61000-4-5)
Corrosion resistance Ref. IEC 60068-2-11; ASTM B-117,
28 days; connectors mated
RELIABILITY SPECIFICATION
MTBF (Telcordia SR-332 @ 25°C ambient) 1000000 hours/failure Min
Lifetime 10 years Min
REGULATORY
RoHS compliance 2.0
CE marking Yes
Document version:
Change number:
Document issue date: Page 3 of 3
Data Sheet
BRW-DS-T-2281
Main features
Electrical data
Frequency 2575-2615MHz
Return loss -18dB
Insertion loss 1.2 dB Typ
Rejection ≥30 dB @ 2500-2570MHz&2620-2690MHz
Power handling 100W
Intermodulation (3rd order) -117dBm@2x20W
DC Characteristic No DC bypass
Impedance 50
Environmental data
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 1/2
Data Sheet
BRW-DS-T-2281
Mechanical data
Dimension 170 x165 x40 (mm, excluding brackets and connectors)
Weight 1.5kg
Connectors type 4.3-10 female
Mounting Wall or pole
Packing 1pcs in box including mounting accessories
Outline Drawing
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our
part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we
reserve the right to make changes judged to be necessary.
QP-TQ4TE067/ 7.0
Draft Date Checker Approved Date Rev. Engineering Change Number Name Date
XQ.W 15/Apr/2022 Rex Joson 15/Apr/2022 0.1 XQ.W 15/Apr/2022
Rosenberger Hochfrequenztechnik GmbH & Co. KG Prose Technologies Co., Ltd. Page
Tel.: +49 8684 18-0 Fax: +49 8684 18-499 Tel.: +86 21 69214567 Fax: +86 21 69212923
www.rosenberger.de email : info@rosenberger.de www.prosetechnologies.com 2/2