Professional Documents
Culture Documents
Tech Spec of 05 Tone Unit PDF
Tech Spec of 05 Tone Unit PDF
Tech Spec of 05 Tone Unit PDF
2.1.1. The equipment will operate in the following temperatures and conditions
2.1.1.1 In general components up to 50°C or higher
2.1.1.2 In electronic components up to 55°C or higher
2.1.2. To operate with a relative humidity of 90% or higher, non-condensing.
2.1.3. The goods will be painted, according to the colors indicated in Annex N.
2.2.2. Dashboard:
The instrument panel will have indicators of the following parameters of the cab chassis:
2.2.2.1 Engine oil temperature.
2.2.2.2 Water temperature.
2.2.2.3 Air pressure of the tank or tanks that store air.
2.2.2.4 Fuel level.
2.2.2.5 Vehicle speed (Km/hr).
2.2.2.6 Engine speed in RPM.
2.2.2.7 odometer.
2.2.2.8 Battery voltage indicator.
2.2.4. Accessories
Will have the following accessories
2.2.4.1 Front wheels and tires: 2 wheels with tires.
2.2.4.2 Rear wheels and tires: 8 wheels with tires.
2.2.4.3 Spare wheel with tire.
2.2.5. Front spare tire carrier
2.2.5.1 Include according to the manufacturer's design.
2.2.6. Dimensions
2.2.6.1 General dimensions and gross vehicle weight will comply with NOM-012-SCT-2-2017.
2.4. CABIN.
2.4.1. Operator cabin.
According to the manufacturer's design, which will have at least the following characteristics and
technical specifications:
2.4.1.1 doors and windows
2.4.1.1.1 Access door to the operating cabin.
2.4.1.1.2 Sliding or folding window with security glass.
2.4.1.3 Accessories
2.4.1.3.1 12 VDC socket (Volts of Direct Current).
2.4.1.3.2 Captain's chair for winch operator with high backrest, with swivel base.
2.4.1.3.3 It will have an air conditioning system with a capacity of 18,000 BTUS or higher.
2.10.2. Feather
2.10.2.1 The boom shall be of a sectional telescopic or articulated design which shall be
hydraulically operated.
2.10.2.2 It will operate with an angle of inclination from its initial position up to + 78º or higher.
2.10.2.3 The boom will be provided with an angle indicator mounted near the operator's station.
2.10.2.4 Boom capacities will meet the minimum requirements for each boom section, while
also meeting all SAE J-765 stability test requirements, SAE J1063 tension
requirements , and ANSI B30. 5.
2.10.4. Rotation.
2.10.4.1 The boom shall be able to rotate a minimum of 360 °.
2.10.4.2 The brake shall have the ability to slip to reduce shock loads on the swing system.
2.10.4.3 The rotation system shall be capable of rotating, holding, and resetting capacity loads
up to a 5 ° slope.
2.10.5. controls
2.10.5.1 The operator's station in the rear platform will allow an optimal visual range that Contd……
allows him to carry out the pertinent maneuvers.
2.10.5.2 The crane will be equipped with at least one control station, located at its base
2.10.5.3 Each station will consist of a throttle, engine start/stop switch, horn, control levers,
and load charts.
2.10.5.4 It will have at least one manometer to monitor the hydraulic pressure in operation.
2.10.5.5 There will be at least one bubble level at both operator stations on a surface parallel
to the pivot bearing.
2.10.6. stabilizers
2.10.6.1 The crane will be equipped with outriggers located according to the manufacturer's
design to provide stability for the slickline unit, with the crane operating at its maximum
capacity.
2.10.6.2 Audible motion alarm shall be standard.
2.10.6.3 The crane will be equipped with an outrigger monitoring system and outrigger
movement alarms.
2.10.6.4 Crane cylinders will be completely closed to prevent debris from entering the cylinder.
2.10.6.5 The stabilizers will have the retract, half and full positions with a range of vertical
movement.
TM-ZT500
For Medium / Large Size Vehicles
NEW
MODEL
TM-ZT500 Series
THREE-POINT SUPPORT SYSTEM
(Equalizer Crane Support) ELECTROSTATIC PAINTING
The equalizer crane support Our high deposit and efficient
system protects the chassis electrostatic painting method, which
frame by evenly distributing the maintains the external appearance
load applied to the frame during fine and beautiful, prevents the
vehicle traveling to prevent machine from rusting, and provides
excessive stress from uniform painting quality equally at
concentrating at any one point. every corner.
LOCK SYSTEM
305 m mm
m 160
STRONG PENTAGONAL BOOM HOOK IN (Hook In model only)
TADANO's traditional strong pentagonal TADANO original HOOK IN
boom is thoroughly designed and well system enhances work efficiency.
proven for its quality, strength and No more manual belaying. Just
smoothness, with a rigid and fine-tuned push the HOOK IN button and
telescoping boom providing comfortable operate the hoist up lever for
crane operation. automatic hook stow.
WINCH
An upgraded stronger winch motor
provides a stable lifting operation.
CABLE FOLLOWER
(4- and 5-section boom models only)
The cable follower prevents disorderly
cable (wire rope) winding by always
pressing the cable onto the winch drum
and puts the wire rope at a right
position.
TM-ZT500 Series
TECHNICAL SPECIFICATIONS
MODEL TM-ZT504 TM-ZT504H TM-ZT503
TM-ZT505 TM-ZT505H TM-ZT503H
CRANE CAPACITY 5,050 kg at 2.5 m (5-parts of line)
BOOM Fully hydraulic telescoping boom of Fully powered partly synchronized telescoping boom of
pentagonal box construction pentagonal box construction
Number of sections 3 4 5
Length 3.47 m–8.31 m 3.55 m–10.8 m 3.77 m–13.34 m
Extending speed 4.84 m / 18 s 7.25 m / 21 s 9.57 m / 25 s
Elevating range/speed 1˚ to 78˚ / 12 s
Max. lifting height** Approx. 10.3 m** Approx. 12.7 m** Approx. 15.2 m**
Max. load radius** 8.09 m** 10.58 m** 13.12 m**
WINCH Hydraulic motor driven. Hydraulic motor driven. Spur gear
Spur gear speed reduction, speed reduction, provided with
provided with mechanical brake. mechanical brake and cable follower.
Max. Single line pull 9.90 kN {1,010 kgf}
Max. Single line speed 66 m/min. (at 4th layer)
Wire rope (Diameter x length) 8 mm x 67 m 8 mm x 82 m 8 mm x 97 m
SLEWING Hydraulic motor driven. Worm gear speed reduction.
Continuous 360˚ full circle slewing on ball bearing slew ring. Automatic slewing lock.
Slewing speed 2.5 min-1 {rpm}
OUTRIGGERS Manually extended sliders and hydraulically extended jacks.
Integral with crane frame.
Extension width Max. : 3.8 m Mid. : 3.0 m Min. : 2.20 m
HYDRAULIC SYSTEM
Pump Single gear pump
Control valves Multiple control valves with integral safety valves
STANDARD SAFETY DEVICES •Load meter •Load indicator •Over-winding alarm •Hook safety latch
•Hydraulic safety valves, check valves and holding valves •Level gauge •Anti-two-block device*
SUITABLE TRUCKS Gross vehicle mass 12,000 kg or more
Model name with "H": Hook Stowing Device is equipped.
* For crane with hook stowing device only.
** Boom deflection, and subsequent radius and boom angle change must be accounted for when applying load to hook.
78°
TM-ZT504 13.34-m Boom
70°
16
10.97-m Boom
°
15 15
60
10.8-m Boom 8.59-m Boom
78°
14 14
TM-ZT503
70°
°
8.39-m Boom
50
6.21-m Boom
13 13
°
60
5.99-m Boom
12 12 12 °
40
78°
8.31-m Boom
50
3.77-m Boom
70°
11 11 11
°
°
60
3.55-m Boom
40 °
10
5.91-m Boom
10 10 30
°
50
9 ° 9 ° 9
40 30
Lifting height (m)
Lifting height (m)
3.47-m Boom
8 8 8
20°
°
30
7 7 20° 7
6 20° 6 6
10°
5 5 10° 5
10°
4 4 4
1° 1° 1°
3 3 3
2 2 2
1 1 1
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 10 11 12 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
-1 -1 -1
Lifting depth below ground level (m)
-2 -2 -2
-3 -3 -3
Lifting depth below ground level (m)
-4 -4 -4
Lifting depth below ground level (m)
-5 -5 -5
-6 -6 -6
-7 -7 -7
-8 -8 -8
-9 -9 -9
-12 -12
-13 -13
Load radius (m)
-14
-15
-16
Load radius (m)
TM-ZT503, ZT503H
• 3.47-m boom
Load radius (m) 2.5 and
below 2.95 3.25
Rated lifting capacity (kg) 5,050 4,050 3,700
• 5.91-m boom
Load radius (m) 2.95 and
below 3.8 4.1 4.5 5.0 5.69
Rated lifting capacity (kg) 4,050 3,130 2,930 2,580 2,280 1,950
• 8.31-m boom
Load radius (m) 3.8 and
below 4.1 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.09
Rated lifting capacity (kg) 3,130 2,930 2,580 2,280 2,030 1,830 1,680 1,550 1,430 1,280
TM-ZT504, ZT504H
• 3.55-m boom
Load radius (m) 2.5 and
below 2.95 3.33
Rated lifting capacity (kg) 5,050 4,050 3,630
• 5.99-m boom
Load radius (m) 2.95 and
below 3.8 4.1 4.5 5.0 5.77
Rated lifting capacity (kg) 4,050 3,130 2,930 2,580 2,280 1,900
• 8.39-m boom
Load radius (m) 3.8 and
below 4.1 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.17
Rated lifting capacity (kg) 3,130 2,930 2,580 2,280 2,030 1,830 1,680 1,550 1,430 1,280
• 10.8-m boom
Load radius (m) 4.5 and
below 5.0 6.0 7.0 8.0 9.0 10.0 10.58
Rated lifting capacity (kg) 2,030 1,830 1,480 1,230 1,080 980 880 830
TM-ZT505, ZT505H
• 3.77-m boom
Load radius (m) 2.5 and
below 2.85 3.55
Rated lifting capacity (kg) 5,050 4,050 3,230
• 6.21-m boom
and
Load radius (m) 2.85 below 3.6 3.9 4.5 5.0 5.5 5.99
Rated lifting capacity (kg) 4,050 3,180 2,930 2,430 2,130 1,880 1,650
• 8.59-m boom
Load radius (m) 3.6 and
below 3.9 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.37
Rated lifting capacity (kg) 3,130 2,930 2,430 2,130 1,880 1,650 1,480 1,350 1,230 1,080
• 10.97-m boom
Load radius (m) 4.5 and
below 5.0 6.0 7.0 8.0 9.0 10.0 10.75
Rated lifting capacity (kg) 2,030 1,830 1,480 1,230 1,030 880 780 730
• 13.34-m boom
and
Load radius (m) 5.0 below 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.12
Rated lifting capacity (kg) 1,330 1,100 950 830 730 650 600 550 500
TADANO LTD. (International Sales Division) TADANO (THAILAND) CO., LTD. (Head Office/ Factory)
4-12, Kamezawa 2-chome, Sumida-ku Tokyo 130-0014, Japan 500/70 Moo 2, T.Tasit, A. Pluak Daeng, Rayong 21140
Phone: +81-3-3621-7750 Fax: +81-3-3621-7785 Phone: +66 (0) 33-01-0939 Fax: +66 (0) 33-01-0940
http://www.tadano.com/ E-mail: info@tadano.com http://www.tadanothailand.co.th/
Email: tadanothailand.sales@tadano.com, tadanothailand.service@tadano.com
2016-06
Translated from Spanish to English - www.onlinedoctranslator.com
A NEW GENERATION
FOCUSED ON EFFICIENCY
The all-new Kenworth T380 and
AND RESISTANCE
are vehicleswith greater capacity, greater efficiency in
fuel consumption, longer times between maintenance
and with technology at the service of the operator and
the environment.The TruckTech Plus system enables
remote telemetry diagnosis of engine operation and can
sendupdates safely and easily from wherever the drive
is.
GREATER VISIBILITY AND
DRIVING SAFETY
The design of the new models allows
greater visibility while drivingand project
an image of power and quality. The hood is
shorter with the DayCab, its windshield,
wider side windows and strategically placed
mirrors, andIts large illumination of the
headlights improve the visibility of the driver
making it easier to maneuver safely and react in a
timely manner to any unforeseen events.
We know that during the work day you will probably get on
and off the unit many times, soWe designed three points
of support (two handles and handrails) and more
ergonomic steps, for a firmer footing that will make
your day safer and more comfortable.
The steering column is adjustable to give more
room when climbing.
Greater lighting
TALKING ABOUT THE CABIN IS TALKING
KW 20-DEC-2022 * Terms, conditions and costs of these programs are available from participating Kenworth Dealers.
08
07
20
T
16
Y1 Y2
10
22 Breather Cap and Filling Neck 1
21 Hydraulic Tank 1
20 Solenoid Valve 1
B
04 01 Hydraulic Pump Winch Drum Drive 1
02 19 S. NO. DESCRIPTION QTY.
PTO
03 PART LIST
X
MANUFACTURED BY-
vks,uthlh
DT
UNITED DRILLING TOOLS LTD.
Email - enquiry@udtltd.com
Phone - 0120 4842400 ONGC
ENGINE DRUM HYDRAULICS EMERGENCY
MANUFACTURED BY-
AIR PRESSURE SAFETY VALVE CHARGE HYD. OIL SYSTEM HOOTER
PRESSURE TEMPERATURE PRESSURE
TACHOMETER
H DN
LOCK UNLOCK AIR BRAKE SPOOLING MOTOR
RPM OFF
L
ENGINE RPM
H UP
RPM SLEW RING ON
SPEED CONTROL SYSTEM PRESSURE EMERGENCY
OFF
RESET CONTROL STOP
DRUM CONTROL
LH RH
DIRECTION STEERING WHEEL
ON
05 TONE