Professional Documents
Culture Documents
Power Management: Guide
Power Management: Guide
management
Guide
Contents
4 Introduction 58 Products
58 Gallium nitride (GaN) Power ICs
6 Applications 60 AC-DC conversion ICs
6 Energy generation and distribution
66 Battery management ICs
12 Power supplies
68 DC-DC switching conversion ICs
33 Wearable devices - power management
72 Digital power controllers and microcontrollers
34 Medical power supply
76 Diodes and rectifiers
36 LED lighting and controls
78 eFuses and hot-swap ICs
43 Electro-Mobility
80 Galvanic isolated Sigma-Delta ADC
52 Industrial power & tools
82 IGBTs
55 Major home appliances
84 Intelligent power module - SLLIMM
57 Software tools 86 Intelligent power switches
57 eDesignSuite 88 LED drivers
93 Linear voltage regulators
94 Metering ICs
95 Photovoltaic ICs
96 Power MOSFETs
100 Power module – ACEPACK packages options
101 Power over ethernet ICs
102 Protection devices
104 STDRIVE and STGAP gate drivers
106 Thyristors
108 USB Type-C® and power delivery controllers
Introduction When designing a power management system or sub-
system, regardless of whether it is an energy generation
or distribution system, a power supply or a LED driving
circuit, an industrial SMPS or an electric vehicle power
application, it must provide high efficiency and low
standby power, as well as high power density, reliability
and safety, while respecting specific cost constraints.
The key enablers for any such system are discrete and
integrated power semiconductors, which play a crucial
role in every step along the energy supply chain and,
when applied in conjunction with advanced control
technologies, can drive continuous improvement in
energy savings for homeowners and communities, and
ultimately for the entire planet.
The technological innovation, which persists at the core
of ST strategy for more than 30 years, is the reason
why ST today can offer an extensive range of cutting-
edge products for power and energy management. ST
portfolio includes higher-efficiency power technologies
such as:
• Silicon carbide power • AC-DC converters and
discretes controllers
• GaN Power ICs • DC-DC converters
• HV and LV power MOSFET • Linear voltage regulators
and IGBTs • Analog ICs
• Customized power • Battery management ICs
modules
• STM32 microcontrollers
• Diodes and Thyristors
• MOSFET and IGBT gate
• Protection devices and drivers
Filters
Moreover, ST offers a variety of wireless and wired
connectivity ICs as well as high-performance sensors
to complement the latest smart power electronics
More than 30 years of technology applications with additional sensor-driven features and
monitoring functions.
innovation in power management directly ST is also committed to the development of GaN power
resulting in value creation for our customers, devices, which represent a major step forward in power
electronics by providing high-frequency operation with
from products to system solutions increased efficiency and higher power density than
silicon-based transistors.
Additionally, we provide a comprehensive range
of reference designs and hardware and software
evaluation and development tools, including the
eDesignSuite tool that helps engineers design and
optimize their high-efficiency power solutions.
4 5
Applications Typical Block Diagram for Central Inverter
Remote
Input Line Grid Monitoring AC grid
Relay Filter Relay
Inverter
DC-DC DC-AC
EMC = = EMC
Smart Filter Filter
String = 3 ~
Combiner
Box Optional
6 7
Solar Distributed Generation - Microinverter Solar Distributed Generation - Power Optimizer
In residential photovoltaic systems, Microinverters are often used as an alternative to string inverters to perform DC to AC power In architectures based on the use of power optimizers, the maximum power point tracking (MPPT) function is performed at the
conversion at the panel level, helping maximize energy yield and mitigate problems related to partial shading, dirt, or single panel failures. level of photovoltaic panels, individually operating each one at its optimal I-V point which ensures maximum power generation.
A microinverter consists of a DC-DC converter implementing maximum power point tracking MPPT, and a DC-AC inverter to shape This results in an improved energy yield of the overall solar system compared to traditional string or central inverter based
current and voltage for injection into the AC grid. Data (including voltage, current and power generated)nfrom all the microinverters in the architectures.
installation are collected by a concentrator and dispatched to a local or remote monitoring and control access point. Power optimizers can help minimize system design constraints as well as improve reliability and safety by helping ensure
Our solution includes MDmesh and STripFET power MOSFETs, high-voltage, galvanically isolated gate drivers, high-voltage silicon compliance with the latest NEC 2017 regulations that require rapid shut-down in the event of grid disconnection, while
carbide (SiC) diodes, together with high-performance STM32 microcontrollers featuring dedicated peripherals to help implement complex reducing maintenance costs.
power conversion control algorithms. A range of wireless and wired connectivity solutions including multi-standard power line modems We provide high-performance STM32 microcontrollers and high-efficiency STripFET F7 LV Power MOSFETs, Diodes, SiC
complete the solution. MOSFETs and trench gate field-stop IGBTs, galvanically-isolated gate drivers, and power line communication solutions to help
achieve superior efficiency and reliability for power optimizer based architectures.
ST product offering for Microinverter
Power MOSFFETs Diodes Protections Signal Conditioning ST product offering for Power Optimizer
60 V-100 V STripFET F7
ST*N6F7, ST*N8F7, ST*N10F7 MCUs Power MOSFETs Gate Drivers By Pass Diodes Diodes Protections Signal Conditioning
TVS for Power MOSFET and Power Rail 100 V to Precision Op Amps (<50 MHz)
600 V MDmesh DM9 ST*60N*DM9 Surge STM32F334 60 V to 100 V 30 V to 45 V
600 V-650 V MDmesh DM6 200 V Power TSZ*, TSV*, TS9*, LMV*
Protection STM32F0 STripFET F7 Power Schottky
ST*60DM6, ST*65DM6 Schottky Current Sensing TSC*
SMAJ, SM6T, SM15T series Power STPS*30
600 V Ultrafast STM32G0 ST*N6F7
HV HB Gate STPS*100 Connectivity
600 V-650 V MDmesh DM2 STTH*R06 Optimizer STPS*45
ST*60DM2, ST*65DM2 ST*N8F7Drivers STPS*200
Thyristors SCRs & Triacs STM32F3 45 V FERD
1200 V Ultrafast Precision Op Amps L649* 100 V FERD TVS for Power MOSFET
650 V MDmesh M9 STTH*S12 STM32G4 ST*N10F7 FERD*45
Microinverter ST*65N*M9 (<50 MHz) FERD*100 & IGBT Protection
100 V Power Schottky Isolated Gate SMAJ, SM6T, SM15T,
Power Stage 600 V MDmesh M6 TSZ*, TSV*, TS9*, LMV* MCUs Power MOSFETs Drivers IGBTs Diodes
STPS*100 SMC30J series
ST*60M6 Current Sensing TSC* STGAP* 600 V V series
SiC Diodes STG*V60DF TVS for Power Rail Surge
650 V MDmesh M5 STPSC*065 Thyristors SCRs & Triacs for Grid Relay
ST*65M5 STM32F334 650 V - 1200V Multiple LS Protection SMAJ, SM6T, Zigbee, Thread
STPSC*H12 TN815-800B, TN1515-600B, T1635H-8G, Gate Drivers 650 V HB series 600 V Ultrafast
800 V MDmesh K6 ST*80*K6 STM32G4 SiC MOSFETs SM15T, SMC30J series STM32WB1
T2550-12G PM8834 STG*H65DFB STTH*06
800 V-900 V MDmesh K5 SCT*65G3AG ESD Protection for I/O Bluetooth Low Energy BlueNRG
ST*80K5, ST*90K5 STM32H7 Single LS 650 V HB2 series STTH*R06
Inverter SCT*N65G2 interfaces STM32WB
650 V SiC MOSFETs STM32F3 Gate Drivers STG*H65DFB2 SiC Diodes
SCT*120G3AG STPSC*065 Power Line Transceivers
SCT*65G3AG, SCT*N65G2 STM32F4 PM88*1 1200 V H series
SCT*N120G2 STPSC*H12 ST8500, ST7580
MCUs MOSFET and IGBT Gate Drivers Sensors EEPROM STG*H120DF2
STM32F7 SCT*N120 Isolated Interfaces for wired connectivity
STM32F334 HV HB Gate Drivers Pressure - LPS22HH 1200 V M series
L638*, L639*, L649* Pressure water proof - LPS33W STISO62x
STM32G4 Standard Serial EEPROM STG*M120DF3
Isolated Gate Drivers Temperature - STTS22H MCUs EEPROM Protections
Microinverter STM32H7 STGAP* Humidity - HTS221
Driving & Data ESD and
STM32F3 Multiple LS Gate Drivers Protections Connectivity Logger/ STM32F0 Standard Serial High Speed Port series
Control stage
STM32F4 PM8834 TVS for Power Rail Surge Zigbee, Thread Internet EEPROM for Dataline ESD and EOS
STM32WB1 STM32G0
Single LS Gate Drivers Protection SMAJ, SM6T, SM15T, Gateway Protection
STM32F7 PM88*1 SMC30J series Bluetooth Low Energy
Note: * is used as a wildcard character for related part number 1 for Data Logger/Internet Gateway only
MCUs EEPROM Protections BlueNRG, STM32WB
Power Line Transceivers
ST8500, ST7580
Data Logger/ STM32F0 ESD and High Speed Port (HSP)
RS-422, RS-485 and RS-232
Internet Standard Serial EEPROM series for Dataline ESD and EOS ST3485*, STR485*, ST3232*
Gateway STM32G0 Protection
Typical Block Diagram
Isolated Interfaces for wired connectivity
STISO62x Remote Monitoring AC grid
Junction PV Voltage DC-DC with MPPT VBus
Note: * is used as a wildcard character for related part number 1 for Data Logger/Internet Gateway only
Box Sensing Power Sensing
Diodes
Transistors
Typical Block Diagram XFRM is optional
By-pass
DC/DC Diode
Input Filter Boost with MPPT DC/AC Output Filter Relay EMI Filter Signal Gate Signal Inverter
Conditioning Drivers Conditioning PLM Smart AC
Aux PS Meter Disconnect
Disconnect
Power Transistors Power Transistors
AC grid By-pass
AC
Vin Disconnect Junction Diode MCU
Diodes Diodes Box
Protections Aux PS
Communication Path
Power Path
8 9
Energy Distribution - Home & Commercial Battery Storage Typical Block Diagram - Commercial Battery Storage System
Systems DC-DC Converter Bidirectional DC-AC Converter AC grid
DC-DC Converter Bidirectional DC-AC Converter
The adoption of energy storage devices, whose reserve capacity can String
DC-DC Converter Bidirectional DC-AC Converter
be used for balancing purposes, peak-load shaving, or to shift loads, is Combiner
MOSFET/IGBT Power MOSFET/IGBT
Box SiC FETs/IGBT
increasingly widespread in energy distribution networks. Drivers Transistors Drivers
Two use cases are particularly important: in residential or commercial Diodes Diodes
Smart Meter
buildings to help reduce consumer electricity bills by reducing energy MCU Bidirectional DC-DC Converter MCU
consumption from the grid during peak hours, and to help avoid Connectivity
Signal Bidirectional DC-DC Converter
Connectivity
Signal
Junction Junction Conditioning Bidirectional DC-DC Converter Conditioning
problems with stability and voltage drop associated with the fast- Box Box MOSFET/IGBT Power
charging requirements of an increasing number of electric vehicles (EV). Aux PS Protections
Drivers Transistors
Aux PS Protections
By interacting with the grid, batteries, and potentially solar panels, Sensors Diodes Sensors
Remote Monitoring
power converters at the heart of these systems must operate with MCU
Sensors Bidirectional Internet Access
high-efficiency and superior reliability over time. Junction Junction
Sensors Connectivity
Signal
BMS
DC-DC
Box Box Conditioning Converter
We provide a range of power discretes, including silicon carbide (SiC) BMS IPS Data logger / Internet Gateway
Battery Aux PS Protections
and silicon power transistors, ACEPACK power modules, silicon Bank IPS
Junction Junction Local Monitoring
carbide and silicon diodes, isolated gate drivers and high-performance Box Box Sensors MCU
STM32 microcontrollers, as well as energy metering ICs for high- Battery n Connectivity EEPROM
PV panels PV panels
efficiency commercial battery storage systems. Protections Aux PS
devices Remote Monitoring
Communication Path
Typical Block Diagram - Home Battery Storage System Power Path Internet Access
Battery Bank
Bidirectional Hybrid Inverter ST product offering for Home & Commercial Battery Storage Systems
Temperature DC/DC DC/AC Power MOSFETs IGBTs Power Modules MOSFET and IGBT Gate Drivers Diodes & Discretes
Sensors
Power DC-DC Converter 40 V-100 V STripFET F71
AC grid ST*N4F7, ST*N6F7, ST*N8F7, ACEPACK
Battery Transistors & Bidirectional
ST*N10F7 Power Modules
Management Power DC-DC Converter 600 V MDmesh DM9 A1P50S65M2
Diodes Transistors ST*60N*DM9 A1P25S12M3 HV HB Gate Drivers 600 V Ultrafast
Power A1P35S12M3
Power Stage 600 V-650 V MDmesh DM6 L649* STTH*06
Breakers ST*60DM6, ST*65DM6 A2P75S12M3
Isolated Gate Drivers STTH*R06
MOS/IGBT 600 V-650 V MDmesh DM2 A2F12M12W2-F1
STGAP* 800 V to 1200 V Ultrafast
Drivers Smart ST*60DM2, ST*65DM2 A1F25M12W2-F13
600 V V series Multiple LS Gate Drivers STTH*08
Meter 650 V MDmesh M9 A2U12M12W2F1
STG*V60DF PM8834 STTH*10
ST*65N*M9 STTH*12
650 V HB series Thyristors SCRs Single LS Gate Drivers
Diodes 600 V-650 V MDmesh M6
ST*60M6, ST*65M6 STG*H65DFB PM88*1 SiC Diodes
DC/DC DC-AC 650 V HB2 series STPSC*065
600 V-650 V MDmesh M2 STPSC*H12
Remote Converter ST*60M2, ST*65M2 STG*H65DFB2
Power Monitoring 650 V M series TVS for Power MOSFET
800 V MDmesh K6
Transistors ST*80*K6 STG*M65DF2 Thyristors SCRs for & IGBT Protection and for
Power Stage Power Breakers Power Rail Surge Protection
String 800 V to 1200 V MDmesh K5 1200 V H series LDO
Local Monitoring Remote Monitoring TS110-8 SMA4F, SMA6F, SMB15F,
Combiner Diodes
ST*80K5, ST*9*K5 STG*H120DF2 series
MOS/IGBT ST*105K5, ST*120K5 X0115 LD1117xx, ST730/2, L78xx
Box 1200 V M series
Drivers 650 V to 1700V SiC MOSFETs DC-DC Converters
SCT*65G3AG, , SCT*N65G2, STG*M120DF3
PV panels MOS/IGBT SCT*120G3AG, SCT*N120G2,
Drivers L6983, L6982, L6981
SCT*N120, SCT*N170
MCUs Signal Conditioning EEPROM Sensors Connectivity
Standard Serial Pressure - LPS22HH
MCU EEPROM Pressure water proof - LPS33W
STM32F334 Protections Temperature - STTS22H
Data logger / Internet Gateway Humidity - HTS221 Power Line Transceivers
Signal STM32G4 Precision Op Amps ST8500, ST7580
Sensors (<50 MHz) BMS
Conditioning System STM32H7 RS-485 and RS-232
MCU TSZ*, TSV*, TS9*, LMV* TVS for Power Rail
Control Stage STM32F3 L9961, L9963E, L9963T STR485*, ST3232*
Current Sensing Surge Protection SMAJ,
EEPROM STM32F4 SM6T, SM15T and ESD Isolated Interfaces for wired
Connectivity EEPROM TSC* IPS
series connectivity STISO62x
Connectivity Protections STM32F7 IPS2050H, IPS2050H-32,
Protections Aux PS IPS1025H, IPS1025H-32,
Aux PS devices IPS4260L
Communication Path
Power Path MCUs Protections EEPROM Connectivity
Power Line Transceivers ST8500, ST7580
STM32F0 ESD and Bluetooth Low Energy BlueNRG, STM32WB
Data Logger/ STM32G0 High Speed Port series Standard Serial RS-485 and RS-232 STR485*, ST3232*
Sub-1GHz RF Transceivers2 S2-LP, SPIRIT1
Internet Gateway STM32F1 for Dataline ESD and EEPROM Sub-1GHz Wireless MCU2 STM32WL
STM32F3 EOS Protection Zigbee, Thread, STM32WB
Isolated Interfaces for wired connectivity STISO62x
Note: * is used as a wildcard character for related part number 1 only for bidirectional dc-dc converter 2 only for commercial battery storage systems 3 samples available in Q4 2022
10 11
POWER SUPPLIES Non-Isolated Auxiliary SMPS
Auxiliary SMPS In a number of applications, the reference of the secondary circuit is connected to the same reference as the primary; that is,
the AC mains. In such cases, an off-line non-isolated auxiliary power supply can be used to provide a regulated DC voltage
Appliances and equipment often require a switch-mode power supply (SMPS) that works separately from the main power supply
using an inductor or low-cost transformer, with simplified isolation, as an energy transfer element by modulating the power
to support auxiliary functions like standby operation. Power ratings can vary from a few watts to tens of watts for these auxiliary
supply’s duty-cycle.
supplies, which can be either isolated or non-isolated. To ensure good performance, engineers must choose the power topology
including fixed frequency or quasi-resonant flyback,that best meets the efficiency, size, safety, and cost requirements. A buck (step-down) topology can be used to generate a positive output with respect to the common terminal and a buck-boost
ST offers a wide portfolio of highly-integrated high-voltage converters for applications up to 100 W, with an extremely low total when the output voltage needs to be negative. A non-isolated flyback converter is the alternative when a higher output power
standby consumption (down to less than 4 mW) and breakdown voltages as high as 1050 V. In addition to PWM switching is required.
controllers, power MOSFETs, and diodes, we offer an extensive set of evaluation and development tools, as well as reference
designs to help engineers develop high-efficiency and compact auxiliary power supply solutions. ST recommended products for Non-Isolated Auxiliary SMPS
Isolated Auxiliary SMPS HV converters VIPer Protection Reverse blocking diodes Output diodes LDO
ST helps the designers of high-power-density and cost-effective isolated auxiliary power supplies with higher switching frequency Buck 600 V Ultrafast STTH*06
solutions to minimize transformer and output capacitor size. 800 V to 1200 V Ultrafast
In the 20 to 100 W power range, the need to meet increasingly tight efficiency and standby requirements for auxiliary power Buck-boost VIPer0P STTH*08 Low Dropout (LDO) Linear
supplies has pushed the use of quasi-resonant topologies in place of more mainstream fixed-frequency-based designs. The VIPer*1 STTH*10 Regulators
power stage is managed by a high-voltage converter. VIPer*6 600 V Ultrafast STTH*06 LDF, LDFM, LDK220,
VIPer122 Schottky, FERD LDK320, LDL212,
800 V to 1200 V Ultrafast STPS*
Non-isolated flyback VIPer222 SMAJ, SM6T, SM15T series ST730, ST732
STTH*08 FERD*45, FERD*50,
ST recommended products for Isolated Auxiliary SMPS STTH*10 FERD*60, FER*100
STTH*12
Offline MOSFET Voltage Ref Output
HV converters HV Power MOSFETs Synch Rect LDO Note: * is used as a wildcard character for related part number
controllers Protection CC/CV Ctrl diodes
PSR-CV HVLED001* 800 V MDmesh K6 ST*80*K6 Power MOSFET
Protection SR Controllers Low Typical configurations for Non-Isolated Auxiliary Power Supply
800 V to 1700 V MDmesh K5 Dropout
ST*80K5, ST*9*K5, SMAJ, SM6T, SRK1000*,
SM15T series (LDO) AC VOUTDC AC
ST*105K5, ST*120K5, Voltage Schottky, SRK1001
VIPer0P ST*150K5, ST*12N170K5 Linear
VIPer*5 Reverse Reference FERD LV Power
VIPer*1 Regulators
650 V MDmesh M9 blocking diodes T*431 STPS* MOSFETs
Isolated Regulation VIPer*7 VIPer*6 STCH03 ST65N*M9 LDF
VIPer*8 600 V Ultrafast T*432 FERD*45 40 V-100 V
flyback with VIPer122 L6566B LDFM
VIPerGaN50 VIPer222 L6566BH 600 V-650 V MDmesh M6 STTH*06 FERD*50 STripFET F7 IC Supply & Feedback
Voltage and LDK220 PWM
optocoupler ST*60M6, ST*65M6 800 V to 1200 V Current Ctrl FERD*60 ST*N4F7,
VIPerGaN65 ALTAIR* L6565 LDK320
VIPerGaN100 600 V MDmesh DM9 Ultrafast FER*100 ST*N6F7, Controller
TSM*, LDL212
ST60N*DM9 STTH*08 ST*N8F7, Direct feedback
SEA05* ST730 PWM VOUTDC
650 V SiC MOSFETs STTH*10 ST*N10F7 ST732 HV Converter
SCT*65G3AG, SCT*N65G2 STTH*12 Controller +
Note: * is used as a wildcard character for related part number
HV Converter Flyback Converter
Buck Converter
Typical configuration for Isolated Auxiliary Power Supply up to 100 W
AC
AC VOUTDC
MCU
or
Main application boards
Synch. Rect. ASIC
IC Supply & Feedback
Controller PWM STEVAL-VP12201B
Gate Drivers Controller 15 V/200 mA buck converter
Connectivity ICs HV Converter VOUTDC
Vref or
CC/CV Ctrl Sensors
PWM User Interface ICs
Controller STEVAL-VP319X1B
Buck-Boost Converter 5 V/600 mA buck converter
HV Converter
12 13
Smart Chargers and Adapters Typical block diagram with Certified Source and Sink Standalone Controllers
USB Type-C® PD Adapters and Quick Chargers Source port Sink port (high power up to 100 W (20 Vbus))
The new slim and reversible USB Type-C connector with USB Power Delivery (PD) feature provides up to 240 W (48 V, 5 A) USB Type-C receptacle USB Type-C receptacle
enabling a faster and more efficient charging solution.
Designers of USB Type-C and Power Delivery compliant adapters and wall chargers can benefit from the ST-ONE, the world’s
most integrated digital controller, the MasterGaN series, an advanced power system-in package integrating a gate driver and SRC path VBUS VBUS SINK path
two e-mode GaN transistors in half-bridge configuration, from standalone controllers, from STM32 microcontrollers and their DC/DC Load
associated protocol stack, as well as a specifically developed range of protection devices. Customers can also choose from
the VIPerGaN series, which can provide up to 100 W power. The VIPerGaN HV converter series embeds an innovative and
advanced quasi resonant PWM controller and a 650 V HEMT GaN-FET with highly efficient performance.
ST recommended products for USB Type-C Power Delivery Smart Chargers and Adapters STUSB47
CC CC
STUSB45
Power Stage Primary Side Power Stage Secondary Side
Fully integrated
Primary Integrated Secondary
HV MOSFET Diodes controller LV MOSFET Diodes
Controller Smart GaNs Controller
PFC L656* 600 V-650 V
SR Analog Output Diodes for Flyback
Isolation MDmesh M6 Schottky STPS*,
MASTERGAN1 ST*60M6, Controllers
Stage 600 V Ultrafast FERD FERD*45, FERD*50,
MASTERGAN2 ST*65M6 SRK1000, SRK1001 FERD*60, FERD*100
VIPerGaN50 for TM 100 V STripFET F7
MASTERGAN3 ST-ONE for Flyback
VIPerGaN65 650 V MDmesh M9 STTH*L06, ST*N10F7 Output Diodes for LLC
MASTERGAN4 SRK2000A,
VIPerGaN100 ST*65N*M9 STTH*06 Schottky STPS*,
MASTERGAN5 SRK2001, FERD FERD*45, FERD*50,
STCH03 650 V MDmesh M5 SRK2001A for LLC FERD*60, FERD*100
L6599*,L6699 ST*65M5 Power supply Consumer device
Type-C and USB-PD Controllers Protections standalone PD controller standalone PD controller
Programmable Solutions Single and multi lines Type C Port protection
High surge LDO/
Fully Standalone protection for MCUs Over voltage protection
Type-C Controller/ Vrm current compact DC-DC
integrated MCUs Solutions Communication Channel (CC) for USB-C and PD 3.0
interface protection (VBUS)
controller and Side Band Use (SBU) controllers
ESDA25P35-1U1M ESDL20-1BF4 STPD01
STM32G0, STM32G4, STM32L5 STUSB1600 20 V
STUSB1700 ESDA24P140-1U3M ESDA25W ST715
STUSB4500L 15 V ESDA17P100-1U2M TCPP01-M12 LDK320
ESDA17P20-1U1M ST730/2
ST-ONE STUSB4500 ESDA15P50-1U1M TCPP02-M18
STM32F0 STUSB4700 9 V ESDA13P70-1U1M
STUSB1602A TCPP03-M20 Load Switch
STM32F3 STUSB4710
STUSB4761 5 V ESDA7P120-1U1M ESDA6V1L STELPD01
ESD051-1F4
Note: * is used as a wildcard character for related part number
Typical configuration
Primary Secondary
Authentification
Primary Secondary
Controller Controller One Chip
Integrated USB Power Dp/Dn
Delivery Main application boards and reference designs
Smart GaNs LV
Controller USB Type-CTM CC lines USB
HV MOSFETs Type-CTM
Interface (PHY) Protections
MOSFETs receptacle
Diodes VBus
Diodes Power
Load switch
Management
STEVAL-ISC004V1 STEVAL-ISC005V1 EVAL-SCS001/2V1
STUSB4710A USB Power STUSB4500 USB Power Delivery SINK USB-PD reference design
Delivery evaluation board evaluation board (EVAL-SCS001V1: migration from DC barrel)
Main application boards and reference designs (with on-board DC-DC) (EVAL-SCS002V1: migration from USB micro-B)
14 15
Automotive-grade USB Type-C and Power Delivery solution Adapters for Tablets, Notebook and All-in-One (AIO) Computers
The USB Type-C and USB Power Delivery specifications allow smarter connectivity with fewer cables, less connectors and Power AC-DC adapters for notebooks, tablets and AIO need to be small, thin, lightweight, and provide excellent EMI
universal chargers. performance, as well as ultra-low, highly efficient standby power, regardless of the load conditions.
The Type-C connector supports all the features of previous standards, and ports can be configured to only supply power in a A typical high-efficiency design includes a flyback or an active clamp flyback stage with synchronous rectification, and for
Provider role,only sink power in a Consumer role, or be able to switch between both in a Dual role. Both data and power roles higher power, a Power Factor Corrector (PFC) working in Transition Mode (TM) followed by a flyback, forward, or half-bridge
can be independently and dynamically swapped using the USB Power Delivery protocol. Most of the automotive applications LLC resonant stage with synchronous rectification.
require support for the Provider role only. When a USB device is connected, the Provider and the device (Consumer) negotiate ST has recenlty introduced GaN Power ICs and offers a broad range of high-voltage MDmesh and low-voltage STripFET power
a contract for the power objects through configuration channels. MOSFETs, as well as standard and field-effect rectifiers (FERD). Our offering also includes a range of PFC, PWM primary
controllers, synchronous rectification controllers, and single-chip analog and digital combo controllers.
Typical Block Diagram for Automotive grade USB Power Delivery
ST recommended products for Tablets, Notebook and AIO Adapters
Controllers Power MOSFETs Diodes
650 V MDmesh M9
+12 V Step Down ST*65N*M9
3.3 V 600 V Ultrafast for TM
Switching 5 V TM Analog Controllers 600 V-650 V MDmesh M6 STTH*L06, STTH*06,
Power Supply Regulator PFC L6562A*, L6563*, L6564* ST*60M6, ST*65M6 STTH15AC06*
Protections STPM066S Block CCM Analog Controllers 600 V-650 V MDmesh M2
Low dropout L4985, L4986, L4981*, L4984D ST*60M2, ST*65M2, ST*60M2-EP 600 V Ultrafast for CCM
SMA6F28AY regulator STTH*R06, STTH*T06
650 V MDmesh M5
LD1117A ST*65M5
Ballast Converters & Controllers GaN Power ICs Diodes & Protections Voltage Reference, CC/CV Ctrl
2STN1360 3.3 V Load switch TVS
NPN STD45P4LLF6AG SM4T30AY Fully Integrated Controller for High Voltage GaN Converters Voltage Reference
SPI USB Type-C Active Clamp Flyback (ACF) VIPerGaN50, VIPerGaN65, VIPerGaN100 T*431, T*432
controller Data ESD Protection USB Type C ST-ONE Integrated Smart GaNs Output Diodes for Flyback Voltage and Current Ctrl
Control STUSB1702 HV Converters for Flyback 600 V MASTERGAN* Schottky, FERD, STPS*, TSM*, SEA05*
USBLC6-2SC6Y SSR: VIPer*5, VIPer*7, VIPer*8
Unit Current Sense Power MOSFETs
FERD*45, FERD*50,
Post Regulation
PSR: VIPer0P, VIPer*1, VIPer122, FERD*60, FERD*100
I2C USB Type-C TSC1031IYPT VIPer222, VIPer*6, ALTAIR* 600 V MDmesh DM9 ST*60N*DM9
TVS Clamping Diodes for Flyback
SPC58 controller Flyback Controllers 600 V MDmesh DM6 ST*60DM6 600 V to 1000 V Ultrafast
Chorus Load switch SM4T30AY STCH03, L6566A, L6566B, L6565 DC-DC Converters
STUSB1702 Isolation 600 V-650 V MDmesh DM2ST*60DM2, ST*65DM2 STTH*06, STTH*08, STTH*10
SPI STD45P4LLF6AG Stage
PFC & LLC 650 V MDmesh M9 ST*65N*M9 Output Diodes for LLC
ST1S*, ST1S40, ST1S50
ESD Protection Combo Controllers
USB Type C STCMB1, STNRG011, 600 V-650 V MDmesh M6 Schottky, FERD Low Dropout (LDO)
Data USBLC6-2SC6Y STNRG011A ST*60M6, ST*65M6 STPS* Linear Regulators
600 V-650 V MDmesh M2 FERD*45, FERD*50, ST715
LLC Analog Controllers LDK320
L6599*, L6699 ST*60M2, ST*65M2, ST*60M2-EP FERD*60, FERD*100
Complete USB Power Delivery version 3.0 including software stack available in AutoDevKit. 800 V MDmesh K6 ST*80*K6 ST715
SR Analog Controllers MOSFET protection for Flyback ST730
SRK1000, SRK1001 for Flyback 800 V to 950 V MDmesh K5 ST*80K5, ST*9*K5
SM6T, SM15T series ST732
SRK2000A, SRK2001, SRK2001A 40 V-100 V STripFET F7
AEK-POW-L5964V1 for LLC ST*N4F7, ST*N6F7, ST*N8F7,
ST*N10F7
Note: * is used as a wildcard character for related part number
Note: EU CoC ver. 5 Tier 2 and EuP lot 6 Tier 2 compliance ensured
16 17
Wireless Charging Desktop PC Power Supply
Wireless chargers, are expected to become ubiquitous in hotels, airports, cafes and other public places as they enable topping The requirements for the standard ATX PC power market are small form factor with better performance.
charging of portable and wearable devices without any cables. An intelligent control scheme that enables adaption to load variation to minimize power consumption, together with optimized
In a wireless battery charging system, power is transferred by electromagnetic induction (inductive power transfer) between a power semiconductors, are key to meeting market demands. Smart analog and digital controllers such as the STCMB1 and the
STNRG011, GaN Power ICs such as the MASTERGAN series and the GaN Drivers, high-voltage MDmesh Power MOSFETs,
transmitting pad (TX) and a battery-powered device (RX) such as a smartphone, smartwatch, or sports gear.
low-voltage STripFET Power MOSFETs, and SiC diodes (STPSC*) help designers develop the best PC power supply solutions to
The power transmitter unit controls the current in the transmitting coil to transfer the correct amount of power as required improve efficiency. ST DC-DC converters guarantee high power density for the post-regulation.
by the receiver unit, which continuously provides this information to the transmitter by modulating the transmitter carrier
frequency through controlled resistive or capacitive load insertion. Generating the correct amount of power guarantees the ST recommended products for Desktop PC’s Power Supply
highest level of end-to-end energy efficiency and helps limit the device’s operating temperature.
Controllers Power MOSFETs
Diodes & Discretes Opamp V/I Sensing
ST has a wide range of wireless charger IC solutions, including transmitters and receivers providing low standby power, 600 V Ultrafast for TM Precision Op Amps (<50 MHz)
accurate foreign object detection (FOD) and reverse charging features. In order to prevent unwanted damage to any NFC TM Analog Controllers 650 V MDmesh M9 ST*65N*M9 STTH*L06, STTH*06, STTH15AC06* TSZ*, TSV*, TS9*, LMV*
Cards that might be close to the wireless charging source during operation, it is recommended to add an NFC Reader. The L6562A*, L6563*, L6564* MOSFET and IGBT Gate Drivers
600 V-650 V MDmesh M6 600 V Ultrafast for CCM
NFC Reader is able to detect the presence of the NFC Card or Tag (ST Reader ICs can detect Type A, B, F, or V NFC Cards), CCM Analog Controllers ST*60M6, ST*65M6 STTH*R06, STTH*T06
and therefore instruct the operating system to stop transmitting power. PFC Block L4985, L4986, L4981*, L4984D Multiple LS Gate Drivers
600 V-650 V MDmesh M2 SiC Diodes PM8834
MCUs & Digital Controllers ST*60M2, ST*65M2, ST*60M2-EP STPSC*065
ST also offers evaluation and development tools and reference designs to help develop high-efficiency and compact wireless STM32F0, STM32G0, STM32F301, STM32F334, Single LS Gate Drivers
chargers that are Qi compliant for both Baseline Power Profile (BPP) and Extended Power Profile (EPP). Moreover, easy to STM32G4, STNRG388A 650 V MDmesh M5 ST*65M5 TVS for Power Rail Surge Protection PM88*1
use reference designs and evaluation boards enables customization with ST Super Charge protocol for personal electronics, SMAJ40CA-TR
industrial and medical applications. Controllers Power MOSFETs Diodes eFuses
600 V MDmesh DM9 ST*60N*DM9 STEF01
PFC & LLC Combo Controllers Output Diodes Schottky, FERD
600 V-650 V MDmesh DM6 STEF05-STEF05S
STPS*, FERD*45, FERD*50, FERD*60,
ST recommended products for Wireless Charging STCMB1, STNRG011, STNRG011A ST*60DM6, ST*65DM6 FERD*100 STEF12-STEF12S
LLC Analog Controllers STEF12H60M
Wireless charging Battery Charger 600 V-650 V MDmesh DM2
L6599*, L6699 Protections MOSFET and IGBT Gate Drivers
MCUs Power MOSFETs Protections Diodes NFC reader ST*60DM2, ST*65DM2
ICs ICs Asymmetrical HB Controllers TVS for Power MOSFET and Power
TVS Isolation 650 V MDmesh M9 ST*65N*M9 Rail Surge Protection Integrated smart GaNs
STM32G0 STL10N3LLH5, STL8DN6LF3, STPS*L30 L6591
STWBC86 SMAJ, SM6T, SM15T series DC-DC Stage 600 V-650 V MDmesh M6 SMAJ, SM6T, SM15T series 600 V MASTERGAN*
Transmitter STM32F334 ST*N2VH5, STL8DN10LF3, STPS*45/60/100 MCUs & Digital Controllers ST*60M6, ST*65M6
STWBC2-HP USB Port Protection ST25R3911B STM32F0, STM32G0, LDO HV HB Gate Drivers for GaNs
STM32G4 STL6N3LLH6, STL10N3LLH5 FERD*45/60/100 600 V-650 V MDmesh M2 STDRIVEG600
TCPP01-M12 ST25R3912 STM32F301, STM32F334, STM32G4,
STWLC38 ST25R3916B STNRG388A ST*60M2, ST*65M2, ST*60M2-EP Low Dropout (LDO)
Linear Regulators HV HB Gate Drivers
Receiver STWLC86 STBC02 ESDALC14V2-1U2 BAT30F4, BAR46 SR Analog Controllers 40 V-100 V STripFET F7 LDF, LDFM, LDK320, LDL212, L649*
STWLC98 SRK2000A, SRK2001, SRK2001A for LLC ST*N4F7, ST*N6F7, LD39200, LD117 Isolated Gate Drivers
ST*N8F7, ST*N10F7 STGAP*
Note: * is used as a wildcard character for related part number
Controllers Power MOSFETs Voltage Reference SR Multiple LS Gate Drivers
Post PM8834
Typical Block Diagram L6726A, L673*, PM6680 STL90N3LLH6 T*431, T*432, TS33*
Regulation
Transmitter Receiver Note: * is used as a wildcard character for related part number
AUX PS
48 V High Current
DC-DC Digital ASIC
Direct CPU, DDR, GPU STDES-3KWTLCP STEVAL-DPSTPFC1 STEVAL-SCR002V1
3 kW telecom rectifier reference design 3.6 kW PFC Totem-Pole with Inrush current limiter for 1
with Totem-Pole PFC and LLC Converter digital inrush current limiter kW AC/DC
20 21
Power Distribution for Modern Data Center Typical Configuration for Switched-Tank Converter (STC) System - 48 V to 12 V non isolated unregulated IBC
To support the evolution and expansion of cloud services, the internet ST*N6F7, ST*N8F7
Bootstrap Power MOSFTEs
of things, mobile apps, and new generation of telecommunication
VIN
infrastructure, the demand for data centers performance is growing
exponentially with more powerful CPUs, and this segment is expanding
in artificial intelligence and machine learning. Hot M1 M2 M3 M4
Swap Fly MOSFETs M5 M7 M9
In the newest architecture, a 48 V DC rail is generated from the AC-DC
Driver
power supply unit , which is then converted to provide the number
of DC rails needed to supply the various loads and circuits in the STPRDC02
server. This conversion must meet stringent efficiency targets requiring
innovative architectures like those developed by ST.
We offer a wide range of high-efficiency regulated and unregulated To M3, M4, Driver Bootstrap
DC-DC conversion solutions, including STB, STC, HSTC for 48 to 12 V
STNRG328A
intermediate bus conversion. STNRG328S STPRDC02 M6 M8 M10
To M7, M8, Driver
Moreover, we offer 12 V to Point of Load conversion, including multi- Synch MOSFETs
To M9, M10, Driver
phase digital controller and Smart Power Stages (SPS) to support the Driver
most recent INTEL and AMD CPU specifications.
Finally, ST offers direct conversion solutions, from 48 V to point-of-
load, based on the Power Stamp Alliance (PSA) products. Typical Configuration for STBUCK - 48 V to 12 V non isolated regulated IBC
22 23
Typical Configuration for 48 V Isolated Direct Conversion SSD Power Management
400 230 Solid State Drives (SSD) serve the same function as Hard Disk Drives,
MV VAC VAC AC/DC DC/DC 48 V DC 48 V but they have a different set of internal components; they have no
moving parts and data is stored in flash memory. SSDs can access
48 V 48 V 48 V 48 V 48 V 48 V
data faster than HDDs and have several other advantages such as
2 Cells 4 Cells 2 Cells 2 Cells 4 Cells 2 Cells
better performance and robustness and lower power consumption.
48 V PSU SSDs are widely used in desktop and notebook computers, as well as
CPU CPU
Generator for storage in data centers.
+ 48 V/12 V Others CPU rails
Battery - ST offers state-of-the-art products for SSD system architecture,
1 Cell Aux rails
including Power Management ICs featuring protections and
Stand-by rails
48 V - 40 V BBS 48 V/5 V communication bus. Our portfolio of high-quality components allows
1 Cell the design of solutions that meet the most demanding requirements of
both consumer SSD and enterprise-grade SSDs.
48 V/1 V
ASIC/FPGA/GPU The ST device family is ideal for designing advanced power
1 Cell
management solutions for microcontroller, DDR, Flash memory, on
SSD server and consumer applications.
The IC series features multiple Buck and LDOs with programmable
ST*N4LF7 outputs and supports conversions from a wide range of input voltage
ST*N6F7 ST*N6F7 buses like 12 V, 5 V and 3.3 V.
ST*N10F7 ST*N10F7 Electronic fuses (eFuses) for 3.3, 5 and 12 V located at the power
connector minimize system down-time by protecting the SSD and the
host from failures.
High switching frequency eases the design of compact applications,
while specific control techniques ensure best-in-class efficiency at
Full Bridge Synchronous
heavy and light load operation.
driver Rectifier
STPRDC02 STPRDC01 Full programmability via high speed serial interfaces like I2C and
PMBus® allows configurability for different application requirements.
Load
Typical Block Diagram for SSD Power Management
12V
Digital Digital eFuse & Power Power Loss
5.0V
Isolator controller Data & Power Load Switch Management ICs Protection & PLP Cap
(optional) STPDDC60 3.3V Cap Health Monitor
Connectors
SATA / SAS /
PCle / NVMe
24 25
STPMIC06 Power over Ethernet (PoE)
VIN = 4.5 V to 15.6 V Power over Ethernet (PoE) is a widely adopted technology used to transfer power and
supply the powered device (PD), including wireless access points, VoIP phones over
an RJ-45 cable also carrying data as described in the IEEE 802.3 standard, and its
evolutions including IEEE 802.3bt, IEEE 802.3at, and IEEE 802.3af.
PMBUSTM We offer a range of products for complete interface with all the functions required by the
VOUTA communication standard, including detection and classification, as well as protection
BUCK A BUCK C VOUTC features such as under-voltage lockout (UVLO) and in-rush current limitation. In addition,
3A NVM
3A these products can control hot-swap power MOSFETs that can greatly simplify the
development of IEEE 802.3 compliant solutions for powered devices (PD).
STPMIC06
Typical block biagram for PoE Power Management
VOUTB BUCK B BUCK D VOUTD
3A 3A PM8805 48 V Conversion and Utilization
48 V
PoE front-end SiP DC-DC
Ethernet switch Dual MOS Converter
UPS L7983
VOUTA-D = 0.5 V to 5.4 V Active Bridge
PoE end-span L7987*
Hot-swap MOSFET L3751
STPMIC07M switch (PSE)
VIN = 2.6 V to 5.5 V PoE interface Output
PWM
Mid-span 802.3BT Power Rect.
Controller
PoE injector (PSE) MOSFETs SRK100*
PM8804
Protections ST*N*F7
SM15T68CA Led Driver
I2C
LED6000
PDs
LED5000
BUCK 1 NVM BUCK 2 HVLED002
Power Data
STEVAL-POE005V1 STEVAL-POE006V1
3.3 V/20 A, active clamp forward converter,
12 V/8 A, active clamp forward converter,
Power Over Ethernet (PoE) IEEE 802.3bt
Power Over Ethernet (PoE) IEEE 802.3bt
compliant reference design
compliant reference design
26 27
LED TV Power Supply Typical Block Diagram: Analog Control Solutions with no Aux supply, for Small/Medium Panel Size
Beyond their outstanding image quality, new-generation televisions
have a very thin design, are highly power-efficient and feature a stand- VOUTDC
by power mode. Power Supply Units (PSUs) play a key role in ensuring AC Input Rect. PFC LLC Output Rect.
TVs meet market requirements and have an elegant form factor.
To achieve these stringent requirements, PSUs typically have a Power
Factor Corrector (PFC) stage and use advanced topologies like half-
TM/CCM PFC LLC Synch. Rect.
bridge LLC (HB-LLC) resonant.
controller controller controller
ST offers a broad portfolio of high-voltage MDmesh and low-voltage
STripFET power MOSFETs, field-effect rectifier diodes (FERD),
Schottky and Ultrafast diodes, a full range of protection ICs, as well as
dedicated analog and digital switching controllers, which negate the Analog/Digital combo controller
necessity of auxiliary power by consuming very low power at no load.
In addition, STM32 microcontrollers enable developers to exploit the
full potential of digital PSU implementations. Typical Block Diagram for Digital Control Solutions for Medium/Large Panel Size
28 29
DC-DC Conversion ST product offering for Switching Converters (DC-DC)
A DC-DC switching converter is used to locally supply any component or part of a system with the desired DC voltage and Pre-regulation (>24 V)
current. Depending on the application's relationship between the input and output voltage, engineers have to choose the best
IOUT
power topology: buck, boost, buck-boost or inverting, with or without synchronous rectification. In addition, they can decide to
L3751
use an implementation based on monolithic ICs, or with discrete power switches and controllers, or even an advanced digital A7987 / L7987
implementation. Whatever the choice, the right semiconductor products are key to meeting the specific efficiency and size ST1S14
design targets. STPD01**
3A L6983
ST broad product portfolio includes highly-integrated DC-DC converters and PWM controllers, power MOSFETs and rectifiers, A7986A / L7986
protection ICs, and linear voltage regulators to address a wide range of topologies and power requirements. We also provide L7981
a comprehensive range of hardware and software evaluation and development tools, including eDesignSuite, which that helps 2.5 A A5975AD
engineers design high-efficiency DC-DC converters. 2A
A7987 / L7987L
L6982
L6986
Typical buck configuration: up to 61 Vin/3 A Iout A7985A / L7985
L7980
Vin Vout Vin Vout
L6981
1.5 A A5972D / A5973AD / L5972D / L5973D
A6986F/L6986F
1A A5970D / A5970AD / L5970D / L5970AD
Controller Controller STPS* 500 mA A6985F / L6985F
400 mA A6984 / L6984
300 mA L7983
3.5 V 4V 4.5 V 5.5 V 6 V 28 V 36 V 38 V 48 V 60 V 61 V 75 V
Synchronous buck converter Asynchronous buck converter VIN
Legend: Asynchronous Synchronous Automotive Synchronous controller
Typical multi-phase configuration: up to 12 Vin, very high Typical single phase discrete configuration: up to Note: * under development, ** for USB PD, up to 60 W output power (20 V, 3 A)
output current 18 Vin, high output current
30 31
Typical 48 Vin, up to 65 W Pout, Synchronous Flyback configuration WEARABLE DEVICES - POWER MANAGEMENT
48 V Input Flyback Converter Output Wearable devices, by their very nature, must be compact and comfortable for the user. They need to deliver precise
Input Filter Filter information about user states and conditions, have low power consumption, and the right level of performance to make
them convenient and easy to use. ST products for wearable devices are designed to meet the needs of the most demanding
Load systems with a portfolio covering smart watches, fitness trackers, heart-rate monitors, sports equipment, and a variety of other
Active Clamp wearable devices. Our portfolio includes digital processing, sensors, connectivity, security, and power management solutions
Snubber that can make the difference in a challenging and competitive market.
Specifically for power management, ST provides a range of solutions to allow very small form factor with outstanding efficiency
N-channel Mosfet performance and longer battery life.
PWM peak current ST*N4F7
PM8804
mode controller ST*N6F7 Typical Block Diagram of a Smart Watch
SRK1000
User Interface
STP4CMP
Synchronous Adjustable shunt Display + LCD STLDC08
VCC Rectification Voltage Reference Touch Backlight STLED524
LED1202
Feedback Controller
Feedback OLED PSU
Circuit STOD32A
(TS431AILT)
Sensors Wireless
Optocoupler Motion Connectivity
Motion
Algorithms
Typical 48 Vin, > 65 W Pout, Active Clamp Forward configuration Bluetooth
Environmental Antenna
Low Energy
48 V Input Forward Converter Audio
Microphone NFC Antenna
Input Filter Algorithms
Proximity GPS
Synchronous Output Antenna
Active Clamp Rectification Filter GSM / UMTS
Reset MCU
Audio
Load Speaker Amplifier
eSIM
N-channel Mosfet
PWM peak current ST*N4F7 RTC Security
PM8804
mode controller ST*N6F7 Protections
Memory Secure NFC
STEVAL-ISA203V1 STEVAL-ISA204V1
• Input Voltage range: 42 - 56 V DC • Input Voltage range: 42 - 56 V DC
• Switching Frequency - 250 kHz • Switching Frequency - 250 kHz
• Output: • Output:
• Power - 60 W • Power - 100 W STEVAL-1PS01AJR/DJR/EJR STEVAL-1PS02B STEVAL-1PS03A STEVAL-LDO001V1
• Voltage - 12 V DC • Voltage - 5 V DC Evaluation board based on the ST1PS01 Evaluation board based on the ST1PS2 Evaluation board based on Quad high performance LDO evaluation
• Current - 5 A • Current - up to 20 A 400 mA nano-quiescent synchronous step- 400 mA nano-quiescent synchronous ST1PS03AQTR 400 mA nano-quiescent board based on LDBL20, LDLN025,
• Peak Efficiency > 94% • Peak Efficiency > 94% down converter with digital voltage selection step-down converter with digital synchronous step-down converter with LD39130S and STLQ020
voltage selection and AUX switch load switch
Note: * is used as a wildcard character for related part number
Note: * is used as a wildcard character for related part number
32 33
MEDICAL POWER SUPPLY
The mission critical nature of medical devices demands high quality, reliable, and safe products. Our goal is to consistently
deliver products that meet this criteria and help our customers meet this goal. Medical power supplies are a crucial part of the
equipment, usually you with open frame, enclosed, fanless, and configurable models, as well as wall-mount adapters and DC-
DC modules. Often, the backup battery is part of the power supply to guarantee continuity of operation when the main supply
is interrupted.
Optional
34
LED LIGHTING AND CONTROLS ST product offering for LED General Illumination
Controllers Power MOSFETs Diodes MOSFET and IGBT Gate Drivers
LED General Illumination 650 V MDmesh M9 ST*65N*M9
TM Analog Controllers 600 V-650 V MDmesh M6
LED lamps and bulbs can have a number of different form-factors, depending on the specific use, size, and dimensions of the L6562*, L6563*, L6564* ST*60M6, ST*65M6
600 V Ultrafast for TM
application, including retrofit bulbs, high-bay lights, low-bay lights and emergency lights. Driving a string of LEDs involves AC- STTH*L06, STTH*06, Single LS Gate Drivers
CCM Analog Controllers 600 V-650 V MDmesh M2 STTH15AC06* PM88*1
DC and DC-DC conversion designed using non-isolated, isolated, single stage or multi-stage topologies, which must ensure L4985, L4986, L4981*, L4984D ST*60M2, ST*65M2, ST*60M2-EP
high efficiency and reliability at a competitive cost point. PFC Block 600 V Ultrafast for CCM
MCUs & Digital Controllers 800 V MDmesh K6 ST*80*K6 STTH*R06, STTH*T06 Multiple LS Gate Drivers
Modern applications include a range of connectivity features to implement remote monitoring and control, making LED lighting STM32F0, STM32G0, STM32F301, 800 V to 1200 V MDmesh K5 PM8834
SiC Diodes
STM32F334, STM32G4, STLUX, ST*80K5, ST*9*K5, ST*105K5, ST*120K5
a pillar of smart home, smart building and smart city environments. ST portfolio includes a variety of RF transceivers, wireless STNRG388A
STPSC*065
650 V SiC MOSFETs
MCUs, network processor ICs and fully certified modules for key wireless connectivity technologies. Our embedded software SCT**65G3AG, SCT*N65G2
for BLE Mesh enables mesh networking of connected smart lighting end products. Controllers & Converters Power MOSFETs Diodes & Discretes Voltage Reference, CC/CV Ctrl
For the LED driving stage, we have a range of pulse-width modulation (PWM) and power factor correction (PFC) controllers, 600 V MDmesh DM9 ST*60N*DM9 Voltage Reference
power MOSFETs and diodes, as well as a comprehensive set of hardware evaluation and development tools, including Offline LED Drivers 600 V MDmesh DM6 ST*60DM6 T*431, T*432
HVLED101, HVLED001A/B, HVLED007, HVLED8* Clamping Diodes for Flyback
reference designs to help developers design high-efficiency LED lighting solutions. 600 V-650 V MDmesh DM2 600 V to 1000 V Ultrafast Voltage and Current Ctrl
HV Converters ST*60DM2, ST*65DM2 STTH*06, STTH*08, STTH*10 TSM*, SEA05*
VIPer0P, VIPer*1, VIPer*6, VIPer122, VIPer222, 950 V MDmesh DK5 ST*95DK5 Signal Conditioning
Typical Block Diagram VIPer*5, VIPer*7, VIPer*8 Output Diodes for Flyback
650 V MDmesh M9 ST*65N*M9 Schottky, FERD, Ultrafast TSB*, TSX*, TSV*
LLC Analog Controllers STPS*, FERD*, STTH*
LED General Illumination L6599*, L6699 600 V-650 V MDmesh M6
MOSFET and IGBT Gate Drivers
Isolation ST*60M6, ST*65M6 Output Diodes for LLC/LCC
PFC & LLC/LCC Schottky, FERD
Power Supply Block Stage Combo Controllers 600 V-650 V MDmesh M2
STPS*
STCMB1, STNRG011, STNRG011A, STNRG012 ST*60M2, ST*65M2, ST*60M2-EP FERD*45, FERD*50, HV HB Gate Drivers
~AC 800 V MDmesh K6 ST*80*K6 L649*
PFC Block MCUs & Digital Controllers FERD*60, FERD*100
STM32F0, STM32G0, STM32F301, STM32F334, 800 V to 950 V MDmesh K5 Isolated Gate Drivers
Clamp STM32G4, STM8S, STLUX, STNRG388A ST*80K5, ST*9*K5
MOSFET Protection for Flyback
SMAJ, SM6T, SM15T series STGAP*
Circuit SR Analog Controllers 60 V-100 V STripFET F7 SCR protection switch Multiple LS Gate Drivers
SRK1000, SRK1001 for Flyback ST*N6F7, ST*N8F7, ST*N10F7 TNx015H-6” PM8834
SRK2000A, SRK2001, SRK2001A for LLC Integrated Smart GaNs
CC/CV 600 V MASTERGAN*
Schottky Diodes STPS*
Rectifier 600 V-650 V MDmesh M2 FERD Diodes FERD* HV HB Gate Drivers
Offline LED Drivers ST*60M2, ST*65M2, ST*60M2-EP L649*, L6395
≥ 200 V Ultrafast Diodes
Multiple HVLED002
600 V-650 V MDmesh M6 STTH* Single LS Gate Drivers
strings MCUs & Digital Controllers DC-DC LED Drivers
ST*60M6, ST*65M6 PM88*1
management STM32F0, STM32G0, STM32F334, STM32G4,
STM8S, STLUX, STNRG388A STripFET F7 LED5000, LED6000, ST1CC40, Multiple LS Gate Drivers
PWM ST*N4F7, ST*N6F7, ST*N10F7 PM8834
LED2000, LED2001
Controller
2.4 GHz Multi Standard (ZigBee, Thread,
Bluetooth Low Energy (BLE MESH) Sub-1GHz
802.15.4)
HV Converter
BLE 5.2 SoC
Optocoupler BlueNRG-1, BlueNRG-2 BlueNRG-LP, BlueNRG-LPS Sub-1GHz Wireless MCU
BLE Network Processor BlueNRG Modules STM32WL
BlueNRG-2N BlueNRG-M0 2.4 GHz Dual Sub-1GHz Transceivers
Wireless Baluns BlueNRG-M2 Core Wireless STM32 Wireless Module S2-LP, SPIRIT1
Analog and Digital Connectivity BALF-NRG-0*D3, BALF-NRG-02J5 MCUs STM32WB5MMG
Connectivity STM32 Wireless MCUs
Controller Dual core MCUs BLE 5.2 Module STM32WB STM32F0, STM32G0, STM32L0
STM32WB STM32WB5MMG Baluns
Isolated LED Lighting System IPD (Integrated Passive Device) BALF-SPI-0*D3, BALF-SPI2-0*D3
MLPF-WB55-01E3, MLPF-WB55-02E3
DC Input
EVLHVLED007W35F EVAL-PSR01B-35W EVAL-SSR01B-35W
Option 35 W LED driver with very low THD, based on 35 W LED Driver with very high effciency based 35 W LED Driver with very high efficiency based
Transition Mode Flyback converter (CVout) on QR flyback converter with PSR (CVout) on QR flyback converter with SSR (CC /CV)
PWM
Connectivity
Controller
36 37
LED Street Lighting ST product offering for LED Street Lighting
Street lighting installations have evolved from basic energy-hungry illumination spots to central devices enabling a set of Controllers Power MOSFETs Diodes & Protections MOSFET and IGBT Gate Drivers
services, such as presence and traffic-level monitoring and incident-detection surveillance, while optimizing illumination levels 600 V MDmesh DM9 ST*60N*DM9 HV HB Gate Drivers for GaNs
to specific road and weather conditions to support administrations in transforming cities in smart cities. TM PFC Analog Controllers 600 V Ultrafast for TM PFC STDRIVEG600
L6562*, L6563*, L6564* 600 V MDmesh DM6 ST*60DM6 STTH*L06, STTH*06,
We have a broad range of wired and wireless connectivity, power management, and LED driving solutions. A range of high- CCM PFC Analog Controllers 600 V-650 V MDmesh DM2 STTH15AC06* Single LS Gate Drivers
performance and low-power STM32 microcontrollers, together with presence, proximity, camera, and environmental sensors, ST*60DM2, ST*65DM2 600 V Ultrafast for CCM PFC PM88*1
L4985, L4986, L4981*, L4984D
as well as MEMS microphones, enable design of advanced street lighting systems. 650 V MDmesh M9 ST*65N*M9 STTH*R06, STTH*T06 Multiple LS Gate Drivers
Offline LED drivers
HVLED101, HVLED001B, 600 V-650 V MDmesh M6 SiC Diodes PM8834
HVLED001A, HVLED007 ST*60M6, ST*65M6 STPSC*065 HV HB Gate Drivers
Typical Block Diagram
PFC & LLC/LCC 600 V-650 V MDmesh M2 Output Diodes for Flyback L649*
LED Street Lighting Combo Controllers ST*60M2, ST*65M2, ST*60M2-EP Schottky, FERD, Ultrafast
Isolated Gate Drivers
STCMB1, STNRG011, STNRG011A, STPS*, FERD*, STTH*
800 V MDmesh K6 ST*80*K6 STGAP*
Power Supply STNRG012 Clamping Diodes for Flyback
Power 950 V MDmesh DK5 ST*95DK5 Voltage Reference, CC/CV Ctrl
Protection LED Driver LLC/LCC Controllers 600 V to 1000 V Ultrafast
Supply L6599A*, L6699 800 V to 1050 V MDmesh K5 STTH*06, STTH*08, STTH*10 Voltage Reference
Switch ST*80K5, ST*9*K5, ST*105K5
MCUs & Digital Controllers Output Diodes for LLC/LCC T*431, T*432
STM32F0, STM32G0, STM32F301, 650 V SiC MOSFETs Schottky, FERD
SCT**65G3AG, SCT*N65G2 STPS* , FERD*45, FERD*50, Voltage and Current Ctrl
STM32F334, STM32G4, TSM*, SEA05*
Driver Voltage and STLUX, STNRG388A 60 V-100 V STripFET F7 FERD*60, FERD*100
Current Voltage and SR Analog Controllers ST*N6F7, ST*N8F7, ST*N10F7 MOSFET Protection for Flyback Signal Conditioning
Controller Current Controller SRK1000, SRK1001 for Flyback GaN Power ICs
SMAJ, SM6T, SM15T series
SRK2000A, SRK2001, SCR protection switch TSB*, TSX*, TSV*
SRK2001A for LLC Integrated Smart GaNs TNx015H-6
600 V MASTERGAN*
Controllers DC-DC Buck LED Drivers DC-DC Boost LED Drivers LED Array Drivers
Offline LED drivers LED5000, LED6000, ST1CC40, STP04/08/16/24, STCS*,
12 V LED Driver
HVLED002 LED2000, LED2001
LED6001, LED7707, LED7708
LED8102S
Solar DCDC
Converter 3.3 V Temperature Sensors Control Unit Protection Switch Diodes & Discretes
Control Sensing, STLM20
Temperature Processing, MCUs 60 V-100 V STripFET F7
Mains enable Unit STTS751 LBP01
Sensor Control, STM32F0, STM32G0 ST*N6F7, ST*N8F7, ST*N10F7
Power LED Bypass LM135Z
Switch Wired - Power Line
Connectivity Communication
Wireless - Sub-1GHz Wireless - Sigfox Wireless - LoRa
(Wired/Wireless) Sub-1GHz Wireless MCU
Sub-1GHz Wireless MCU STM32WL
STM32WL Sub-1GHz Transceivers LoRa Wireless MCU
Sub-1GHz Transceivers S2-LP STM32WL
Power Line Transceivers S2-LP, SPIRIT1 MCUs Embedded Software
Connectivity
ST7570, ST7580 MCUs STM32L0, STM32L4 I-CUBE-LRWAN
STM32F0, STM32G0, STM32L0 Baluns Secure MCUs
Balun BALF-SPI2-01D3 STSAFE-A100
BALF-SPI-0*D3, BALF-SPI2-0*D3 Secure MCUs
STSAFE-A100
Note: * is used as a wildcard character for related part number
38 39
LED POE Lighting Lighting Controls
Power over Ethernet (PoE) is a widely adopted technology used to Lighting controls have evolved from simple triac dimmers to more sophisticated architectures, including light sensors, digital
supply a powered device (PD) over an RJ-45 cable while carrying data. and PWM dimmers, DALI network-based systems, and wireless programming solutions.
Described in the IEEE 802.3 standard and its enhancements including ST long-term partnerships with major lighting suppliers combined with our leadership in discrete and integrated power devices
IEEE 802.3bt, IEEE 802.3at and IEEE 802.3af, this technology is enable us to offer high efficiency and cost-optimized solutions for all types of lighting applications and their control, both wired
becoming attractive for LED lighting. (e.g. Powerline) or wireless (RF), for industrial, residential, commercial, and architectural lighting applications.
We have a range of products providing a complete interface with
all the functions required by the communication standard, including DALI Lighting Solution
detection and classification, protection features such as under-voltage
Digital Addressable Lighting Interface (DALI) is a trademark for a network-based technology used to effectively control lighting
lockout (UVLO) and in-rush current limitation, as well as the control of
in building automation. Originally defined in IEC 60929 standards, it has been updated for IEC 62386, which includes LED
hot-swap power MOSFETs that can greatly simplify the development
device types.
of IEEE 802.3 compliant solutions for powered devices (PD). We also
have high-efficiency and optimized DC-DC conversion solutions for We provide a range of analog and digital controllers, including the STLUX family and the STM32 microcontrollers to implement
supplying LEDs. the AC-DC and DC-DC power converter and run the DALI protocol.
LED Driver
TX-RX
KNX KNX
Network DALI IC LED Driver
Transceiver
ST product offering for LED PoE Lighting
PoE Interface Protections Auxiliary Power Supply LED Driver Bluetooth LE
IEEE 802.3bt
PM8805 60 V-100 V STripFET F7 DALI
Buck Bluetooth Low Energy
TVS for Power Rail Surge Buck Converter ST*N6F7, ST*N8F7,
IEEE 802.3at LED6000, LED5000
ST*N10F7 SoC, Wireless MCUs, Network
Protection L7983
PM8803 Inverse Buck Modules
SMAJ, SM15T L7987L Schottky Diodes
IEEE 802.3af HVLED002
STPS*
BlueNRG-*, STM32WB* ST product offering for Lighting Controls
PM8800A
Note: * is used as a wildcard character for related part number LED Driver Power Management KNX Transceiver
Digital Controllers MCUs TVS Protection on KNX Bus
STLUX STM32F1, STM32L1, STM8 SMAJ40CA-TR
Development Tools Embedded Software Refer to LED General Illumination section
STSW-STLUXLIB02, STSW-DALI002, STSW-DALI001, STKNX
STSW-STLUXSMED02 STSW-STM8025
40 41
LED Wireless Programming ELECTRO-MOBILITY
Today's smart LED bulbs let users control features including brightness and color. These properties are controlled though the
driver and can be programmed and modified at any time during manufacturing, distribution, installation, or maintenance. Key applications
The use of NFC technology enables wireless programming using a smartphone, tablet, or portable RFID/NFC reader, without
having to power up the LED driver and brings enhanced flexibility and energy savings in addition to reducing development time
and cost.
DC Fast Charging Station
STMicroelectronics offers optimized and complete LED driver programming solutions with its comprehensive NFC portfolio,
fully addressing the lighting market and featuring all the functions needed for wireless LED programming.
48 V DC-DC 12 V
High-end Market ICE System HV/48 V/12 V System
48 V 12 V
NFC Reader + MCU LED Driver
Antenna Antenna
SPI NFC/RFID Data Dynamic NFC Not in BEV
Microcontroller tag with PWM LED Driver PHEV and BEV only
Reader IC
outputs
Solutions
ST key products and solutions for Electro-Mobility applications include:
Entry-level Market
44 45
48 V Start-Stop System On-Board Charger (OBC)
A start-stop system aims at reducing the amount of engine idle time At the heart of any electric (EV) or plug-in hybrid (HEV) vehicle lies the high-voltage (200
by shutting down and restarting the internal combustion engine to 800 Vdc) battery and its associated charging system. The on-board charger (OBC)
automatically when the vehicle stops. Thus, it contributes to improving provides the means to recharge the battery from the AC mains either at home or from
fuel economy and reducing CO2 emissions. This is especially useful in outlets found in private or public charging stations.
urban environments where vehicles can spend significant amounts of From a 3.6 kW single-phase to a 22 kW three-phase high-power converter, today’s OBCs
time in traffic. must have the highest possible efficiency and reliability to ensure rapid charging times, as
Start-stop operations require power electronics that can handle high well as meet the limited space and weight requirements.
current during cranking and ensure reliability during start-stop cycles, ST has a wide offer of discrete semiconductors, including AEC-Q101qualified silicon and
operating on/off at high temperatures.
silicon-carbide (SiC) MOSFETs and diodes, as well as IGBTs. These are complemented by
ST solutions include silicon power MOSFETs, protections, gate drivers, AEC-Q100 qualified galvanically isolated IGBT and MOSFET gate drivers and SPC5 32-
and microcontrollers in accordance with AEC-Q100 and AEC-Q101 bit automotive microcontrollers for implementing these challenging converters.
standards.
Typical Block Diagram - OBC
46 47
Battery Management
Automotive Battery Management System (BMS) must be able to meet critical features such
as voltage, temperature and current monitoring, battery state of charge (SoC), and cell
balancing of lithium-ion (Li-ion) batteries.
Indeed, the main functions of a Battery Management System for electric vehicles are:
• Battery protection in order to prevent operations outside its safe operating area
• Battery monitoring by estimating the battery pack state of charge (SoC) and state of
health (SoH) during charging and discharging
• Battery optimization thanks to cell balancing that improves the battery life and capacity,
thus optimizing the driving range for hybrid (HEV), plug-in (PHEV) and full electric vehicles
(BEV)
A discharge circuit is present using a HV Power MOSFET (MDmesh K5) working in linear mode to discharge the battery in case
of malfunctioning or accident.
ST25R NFC Reader and ST25D NFC dynamic tags will help fulfill government requirements in certain countries to track
batteries for light electric vehicles (like EV motorbikes) and exchange data between the battery and the vehicle.
12 V
HV power
interface
High-Side
Power Switch
Management
Power supply Safety
Power supply HV capacitor
protection protection
SMxTY discharge
SMxTY Interface SCRs
Voltage Optional ring config
regulator SPI to isolated
Isolated
SPI transceiver Pre-charge contactor
transceiver
L9963T Contactor +
Contactor –
Battery
Wired Control Unit management Battery pack
connectivity Automotive
CAN bus Cell management Sensing
CAN MCU Battery
L9963E V.I.T
transceiver SPC58 E Line
L9616 SPC57 4S Line 48 V - 800 V
Interface
SPI to isolated
Isolated
SPI transceiver
transceiver
L9963T
BMS
main controller
48
DC Fast Charging Station ST product offering for DC Fast Charging Station
The number of full electric vehicles (EVs) is rapidly growing and, as a result, the charging Control
DC/DC Current sensing Connectivity
infrastructure is also expanding, including DC fast charging stations, which have the Input 3ph units Driving Aux
& signal HMI Metering
attractive capability of providing the vehicle with a 100 km driving range in just 10-12 stage PFC 1^ 2^ 1^ 2^ stage SMPS 1^ 2^
conditioning
minutes. side side side side side side
While architectures based on renewable sources and battery storage technologies to take SiC series - 650 V • •
charging stations off-grid are emerging, mainstream solutions are fed from the grid, and a SiC series - 1200 V • •
converter, in the range of 120 kW or more, has a 3-phase input Power Factor Correction Ultrafast RQ series - 600 V • • •
Rectifiers
(PFC) stage and an isolated DC-DC converter. DC Charging stations also provide secure Ultrafast R series - 600 V • • •
connectivity and authentication with the vehicle. STBR series - 800 V/1200 V • •
We can provide a range of power discretes including silicon carbide (SiC) and silicon Schottky series - 40/45/60/100 V •
power MOSFETs and diodes, isolated gate drivers, as well as high-performance STM32 TN series - 1200 V •
microcontrollers to help develop high-efficiency, high-power density DC charging stations. TYN series - 1200 V •
Thyristors
ST25R NFC readers will help compliance with rules in certain countries to accept credit TM8050H series - 800 V •
cards following the EMVCo standard or accept closed-loop payment and even track TN3050H, TN6050HP series -1200 V •
charging in private environments. TVS protections SM4TY, SM6TY, SM15TY, SM30TY • • • •
HMI ESD protections ESDAxxY series, EMIF06-1005MX12Y •
Typical Block Diagram - DC Fast Charging Station SiC series - 650 V/1200 V • •
M5 series - 650 V •
M6 series - 600 V/650 V • •
DC Charging
DM6 series - 600 V/650 V •
station Power MOSFETs
DM2 series - 600 V/650 V •
3ph E-Car K5 series - 1200 V • •
AC input (HV battery pack) M9 series - 650 V • •
DC/DC DM9 series - 600 V •
Input
3ph PFC H series - 1200 V •
stage
HB series - 650 V • •
IGBTs
HB2 series - 650 V • •
V series - 600 V • •
Current sensing & Driving Driving Current sensing & ACEPACK Power A2F12M12W2-F1, A2U12M12W2-F2,
• •
signal conditioning stage stage signal conditioning Modules A1F25M12W2-F1
STM32F334, STM32G4, STM32F3 • • •
MCUs (32bit)
STM32F0, STM32F1, STM32G0 • •
L6491 •
Gate drivers
Control Control STGAP2* •
Unit Unit Iso Sigma-Delta ADC ISOSD61, ISOSD61L •
Auxiliary Current sense TSC102, TSC2010, TSC2011, TSC2012,
HMI amplifiers TSV*, TSZ*
• •
power supply
HV converters VIPer*7, VIPer*6, VIPer26K •
Offline controllers L6566BH, STCH03 •
Connectivity Protections Metering Connectivity STPM066S, L5965, L9396, A6986I,
•
Voltage regulators A798*, A698*
L798*, L698* •
Cloud Local
CAN transceivers L9616 •
CAN ESD protections ESDCAN*Y Series • • •
Power line ST2100 • •
transceivers ST7540, ST7580, ST8500 •
SoC and Wireless BlueNRG-*
•
MCUs STM32WB5*
Main application boards and reference designs Bluetooth
STM32 Wireless
Low Energy STM32WB5MMG •
Module
Transceiver
BlueNRG-M0,
Modules •
BlueNRG-M2
M24SR, ST25DV-
Dynamic tags • •
NFC/RFID I2C
Readers ST25R • •
STPM32, STPM33, STPM34, STPMS2,
Metering ICs •
STISO621
STDES-PFCBIDIR STDES-VIENNARECT STDES-30KWVRECT STEVAL-DPSTPFC1 LED1642, STP08, STP16, LED77*,
15 kW, three-phase, three- 15 kW, three-phase Vienna rectifier 30 kW Vienna PFC rectifier 3.6 kW PFC totem pole with
LED arrray drivers •
LED8102S, LED1202, STLED316S
level Active Front End (AFE) with low cost mixed-signal control reference design with digital digital inrush current limiter
bidirectional converter for power factor correction control Note: * is used as a wildcard character for related part number
50 51
INDUSTRIAL POWER & TOOLS Typical configuration for Single-Phase Architecture for Low/Medium Power Welding
52 53
Uninterruptable Power Supplies (UPS) MAJOR HOME APPLIANCES
Uninterruptable Power Supplies (UPS) ensure continuity of supply by converting the DC voltage from a battery or battery bank
to an AC voltage with the requested amplitude and frequency in case of power outages. Refrigeration, Washing, Drying, and Miscellaneous Equipment
Depending on application requirements, an UPS can be built with a simple off-line configuration or with a double conversion The white goods market requires low-cost and high-energy-efficiency solutions. The refrigeration, washing, drying, and
online method for high-end, medium, or high-power UPSs. This also improves the quality of the power supplied to sensitive miscellaneous (air conditioner, water heater) equipment are some of the major home appliance applications that ST, thanks
loads, including computers, servers, smart industry machines, instrumentation, and telecommunication equipment. We offer to the its wide product portfolio, is able to satisfy with suitable and dedicated power products and high-performing STM32
high-performance discrete devices, including high- and low-voltage power MOSFETs, IGBTs, thyristors, and silicon carbide microcontrollers combined with complementary gate drivers (L638* and L649*). Using SiC diodes (STPSC*), new high-voltage
(SiC) diodes and power MOSFET as well as galvanically-isolated and high-voltage gate drivers, PFC controllers, and high- MDmesh MOSFETs or suitable field stop trench-gate IGBTs, high-efficiency PFC is guaranteed. To reduce the 3-phase inverter
performance STM32 microcontrollers to enable high-efficiency, high-reliability UPS designs. design effort, ST offers the SLLIMM family (small low-loss intelligent molded module) of highly-integrated, high-efficiency
intelligent power modules (IPM) integrating the power stage (both on IGBT and MOSFET discretes), driving network and
ST product offering for Uninterruptable Power Supplies (UPS) protections. Another approach for designing a 3-phase inverter is based on the use of six discrete IGBTs/MOSFETs with the
new 3-phase gate drivers STDRIVE601. High reliability against the inrush current is ensured by new SCRs in the front-end
SCRs & TRIACs Diodes SCRs & TRIACs stage. STPW programmable electronic power breaker family provides a convenient, integrated solution for quickly and safely
Standard SCR
High Temp. SCR TYN6*, TYN8*, TYN10*, TYN12* disconnecting a faulty load from a 12 V bus.
Rect. & inrush TN*015H-6, TN*050H-8, TN*050H-12W Bridge Rectifier Diodes High Temp. SCR
Bypass
current limiter High Temp. Triacs STBR*08, STBR*12 TN5050H-12WY ST product offering for Refrigeration, Washing, Drying and Miscellaneous Equipment
T1635T Standard and Snubberless Triacs
T2550-12, TPDV* SCRs & TRIACs Diodes LED Drivers HV Converters
MCUs & Digital LED Array Drivers
Power MOSFETs IGBTs Diodes Opamp V/I Sensing Protections High Temp. SCR STP04/08/16/24
Controllers
Rect. & inrush TN*015H-6, TN1610H-6, TN*050H-12W Bridge Rectifier Diodes User LED12/16/24*
Precision Op Amps (<50 MHz) AUX SMPS VIPerPlus
650 V MDmesh M9 ST*65N*M9 600 V Ultrafast current limiter High Temperature T-Series and 8H-Triacs STBR*08, STBR*12 Interface STLED3165S
600 V V series TSZ*, TSV*, TS9*, LMV* STLED524
MCUs 600 V-650 V MDmesh M6 for CCM MOSFET and IGBT Gate Drivers Txx35T-8 and Txx35H-8
ST*60M6, ST*65M6 STG*V60F STCS*, LED8102S
STM32F0, STM32G0, STTH*R06 Multiple LS Gate Drivers
600 V-650 V MDmesh M2 650 V HB series STTH*T06 MCUs & Digital Controllers IGBTs Diodes Opamp V/I Sensing Power MOSFETs Power Breakers
STM32F301, PM8834
ST*60M2, ST*65M2 STG*HP65FB 650 V MDmesh M9
PFC Block STM32F334, 1200 V Ultrafast Single LS Gate Drivers
STM32G4 650 V MDmesh M5 ST*65M5 650 V HB2 series Precision Op Amps (<50 MHz) ST*65N*M9
STTH*12 PM88*1 STPW12
STG*HP65FB2 MCUs 600 V V series TSZ*, TSV*, TS9*, LMV* 600 V-650 V MDmesh M6
Digital Controllers 650 V - 1200 V SiC MOSFETs SiC Diodes HV HB Gate Drivers
SCT*65G3AG, , SCT*N65G2, STM32F0, STM32G0, STG*V60F ST*60M6, ST*65M6
STNRG388A 1200 V H series STPSC*065 L649* STM32F103, STM32F301,
SCT*120G3AG, SCT*N120G2, STTH*AC06 MOSFET and IGBT Gate Drivers Protections
STG*H120F2 STPSC*H12 Isolated Gate Drivers STM32F334, STM32G4, 650 V HB series 600 V-650 V MDmesh M2
SCT*N120 PFC Block STTH*R06
STGAP* TVS for Power MOSFET STM32F4 STG*HP65FB ST*60M2, ST*65M2
STPSC*065 DLF Multiple LS Gate Drivers TVS for Power Rail
MCUs Power MOSFETs Diodes MOSFET and IGBT Gate Drivers Protection 650 V HB2 series PM8834 650 V MDmesh M5 SMAJ, SM6T,
Digital Controllers
600 V MDmesh DM9 SMAJ, SM6T, SM15T series STNRG388A STG*HP65FB2 ST*65M5 SM15T, SMC30J
ST*60N*DM9 Single LS Gate Drivers
PM88*1 650 V SiC MOSFETs series
600 V-650 V MDmesh DM6 SCT**65G3AG, SCT*N65G2
ST*60DM6, ST*65DM6
HV HB Gate Drivers MCUs IGBTs IPM MOSFET and IGBT Gate Drivers Power MOSFETs Post Regulation
600 V-650 V MDmesh DM2 L649*
Charge ST*60DM2, ST*65DM2 IPM for compressor 3-Phase HV Gate Driver
Controller Isolated Gate Drivers and drum motor STDRIVE601
650 VMDmesh M9 ST*65N*M9 DC-DC Converters
STGAP* STGIPQ*60T-H HV HB Gate Drivers 600 V MDmesh DM9
600 V-650 V MDmesh M6 600 V H series L698*, ST1S14,
600 V Ultrafast STIPQ*M60T-H L638*, L649* ST*60N*DM9
ST*60M6, ST*65M6 3Ph STG*H60DF L7985, L7986,
STM32F334 STTH*06 STGIF*CH60(T)S-L(E)
600 V-650 V MDmesh M2 Inverter STM32F0, STM32G0, Isolated Gate Drivers 600 V-650 V MDmesh DM6 ST1S4*, ST1S50
STM32G4 1200 V Ultrafast 650 V M series STGIB*CH60(T)S-L(E) ST*60DM6, ST*65DM6
ST*60M2, ST*65M2 Compressor, STM32F103, STM32F301, STG*M65DF2 STGIB*M60(T)S-L(E) STGAP* Low Dropout
STM32F4 STTH*12 Drum Motor, STM32F334, STM32G4,
Power MOSFETs IGBTs MOSFET and IGBT Gate Drivers Post Regulation STIB*60DM2T-L Protections 600 V-650 V MDmesh DM2 (LDO) Linear
STM32F7 SiC Diodes Fan, STM32F4
600 V series ST*60DM2, ST*65DM2 Regulators
STM32H7 STPSC*065 Multiple LS Gate Drivers Pumps IPM for fan and pumps
STG*V60DF DC-DC Converters TVS for Power Rail Surge 650 V SiC MOSFETs LDF, LDFM,
STPSC*H12 PM8834 STIPNS*M50T-H
650 V-1200 V SiC MOSFETs 650 V HB series L698*, ST1S14, L7983, AC Switches & Protection SMA4F, SMA6F, SCT**65G3AG, SCT*N65G2 LDK220, LDK320,
STGIPNS*H60T-H
DC-AC SCT*65G3AG, SCT*N65G2, STG*H65DFB Single LS Gate Drivers L7985, L7986, L7987* Triacs SMB15F, SMC30J series LDK715, LDL212
STIPQ*M60
Stage SCT*120G3AG, SCT*N120G2, 650 V HB2 series PM88*1 Low Dropout (LDO) Linear ACST* STGIPQ*60T-H
SCT*N120 STG*H65DFB2 HV HB Gate Drivers Regulators
Note: * is used as a wildcard character for related part number
1200 V H series L649* LDF, LDFM, LDK220,
STG*H120DF2 Isolated Gate Drivers LDK320, LDK715, LDL212,
DC-DC 60 V-100 V STripFET F7 STGAP* ST730/2
Stage ST*N6F7, ST*N8F7, ST*N10F7 Typical configuration Main application boards
Note: * is used as a wildcard character for related part number
Rect. & PFC Power stage 1
AC STEVAL-IHT008V1
inrush
Typical block diagram for Online UPS with double conversion stage current Gate 1 kW, digital inrush current
limiter driver limiter based on Triac
Driving stage
Protections
Bypass Compressors,
Drum motors,
MCU Washing pumps
Rect. & inrush
AC PFC DC-AC AC load
current limiter AUX STEVAL-IPM*
SMPS
IPM 300 W to 3 kW Power
board based on SLLIMM™
Charge Power Fans,
DC-DC stage 2 Drain pumps
controller
Normal operation Backup operation
54 55
Induction Cooking
Software tools
Induction cooking ranges must be efficient, safe, and provide friendly
user interfaces. Resonant-switching topologies are typically used for
the power converter in these appliances as they also help achieve
lower levels of electro-magnetic interferences (EMI).
We have specifically developed trench gate field-stop IGBTs and
diodes that, together with a selection of high-voltage gate drivers
and high-performance STM32 microcontrollers, are ideal for high-
efficiency converters. ST also offers environmental sensors and LED
and LCD display drivers, touchscreen controllers, and proximity and
sensors required for touch or touch-less user interfaces. The ST25R eDesignSuite is a comprehensive
NFC reader portfolio will allow induction hubs to communicate with easy-to-use design aid tool supporting a
cookware to negotiate power transfer, making kitchen appliance, wide range of ST products
cordless.
AC-DC
Linear Voltage
Regulators MOS /IGBT Drivers MOS /IGBT Drivers
DC-DC
eDSim is a fast and powerful electrical simulation tool for SMPS and
analog ICs integrated in the eDesignSuite tool. It features enhanced
Sensors accuracy and higher convergence speed for SMPS, enabling a
Protections HMI Humidity sensor simulation time 10-50x faster than the classic analog SPICE simulators.
MCU Design your analog circuit using the eDesignSuite engine, display
Temperature sensor a preview with full annotated schematic and BOM, and then run
Power
Breakers Connectivity the electrical simulation through eDSim to get fast and accurate
Accelerometers
simulations and reliable design validation, thus reducing the effort and
risks related to hardware prototyping. With the eDSim tool, you can
also create your schematic from scratch using ST models or simulate
NFC your SMPS and analog ICs from a list of predefined ST application
schematics-test benches, that you can partially modify according to
your needs.
56 57
Products High-voltage GaN converters – VIPerGaN series
The high-voltage power converters series is enriched by the introduction KEY FEATURES AND BENEFITS
of GaN HEMT (high-electron-mobility transistor) technology, in a • Quasi-resonant (QR) protection
small QFN5x6 package. The VIPerGaN series offers excellent design flyback controller • Input voltage
opportunities for compact and light fast chargers, adapters, and power • 650 V E-mode power feedforward
supplies up to 100W with a wide input range. GaN transistor (850 V compensation for
transient voltage) mains independent
• Minimal standby OPP variation
Max GaN
GALLIUM NITRIDE (GaN) POWER ICs HEMT Max POUT @ Max POUT @ power consumptions • Brown-in and brown-
Part Number Package RON @ 25C out
transient 85-265 VAC 185-265 VAC • Embedded sense FET
Integrated Smart GaNs - MASTERGAN voltage • Dynamic blanking • Input OVP protection
Gallium nitride (GaN) is revolutionizing the power engineering world by enabling higher speed, efficiency and power density than ever VIPERGAN50TR 0.45 Ω 850 V 50 W 75 W
time and • Embedded thermal
before possible with silicon MOSFETs. Integrating GaN transistors and gate drivers, our advanced MASTERGAN system-in-package QFN 5x6 adjustable valley shutdown
offer high efficiency due to their optimized gate drive layout, high power density, and increased switching frequency due to minimal VIPERGAN65TR
with
0.26 Ω 850 V 65 W 85 W
synchronization delay • Frequency jitter for
exposed
parasitic effects, translating in a number of benefits for fast chargers, USB PD adapters, LED lighting drivers, TV power supplies, and • Output OVP EMI suppression
pad
server/telecom power designs. VIPERGAN100TR 0.26 Ω 850 V 75 W* 100 W
*100 W with a PFC in the front end
Output
High side Low side
KEY FEATURES AND BENEFITS Part Number
General current
RDS(on) RDS(on)
Supported
description max (A) topologies
• QFN 9 x 9 x 1 mm • Accurate internal (mΩ) (mΩ)
@25 °C
package timing match
• Embedded gate • Interlocking function MASTERGAN1 10 150 150 Resonant, ACF
driver easily supplied • -40 to 125°C High power
by the integrated MASTERGAN2 6.5 225 150 ACF
operating density 600 V
bootstrap diode temperature range MASTERGAN3 half-bridge high 4 450 225 ACF
voltage driver
• Overtemperature • High switching with two 650 V
protection Resonant, ACF,
frequency >1 MHz MASTERGAN4 enhancement 6.5 225 225
inverse buck
• Extended 3.3 to 15 V mode GaN HEMT
• No investment to
input range with learn GaN required MASTERGAN5 4 450 450 Resonant, ACF
hysteresis and pull-
down • Fast time-to-market
SMPS USB PD Adapter UPS Solar LED Lighting USB PD Adapter Air Conditioning TV Power Supply Home appliances
58 59
AC-DC CONVERSION ICs High-voltage converters
ST high-voltage AC-DC converters combine an advanced pulse width modulation (PWM) controller with a high-voltage power
ST-ONE all-in-one digital controller for USB-PD adapters MOSFET in a single package. This makes them ideally suited for offline switch mode power supplies (SMPS) with output power
ST-ONE (single USB port) and ST-ONEMP (multiple USB port) are the world’s first digital from a few watts to a few tens of watts.
controllers embedding ARM Cortex M0+ core, an offline programmable controller with The VIPerPlus series (VIPer0P, VIPer122, VIPer222, and VIPer*1, VIPer*5, VIPer*6, VIPer*7, VIPer*8 families) features an 800 V
synchronous rectification, and USB PD PHY in a single package. Such a system is avalanche-rugged power MOSFET and leading-edge PWM controller and consumes less than 4 mW for VIPer0P, 10 mW for VIPer*1
specifically designed to control ZVS non-complementary active clamp flyback converters and 30 mW in standby for the others. It also comes with the largest choice of protection schemes and supports different topologies.
to create high-power-density chargers and adapters with USB-PD interface. The device The VIPer26K belongs to VIPer*6 family and integrates a 1050 V avalanche-rugged power MOSFET, suitable for cost effective
includes an active clamp flyback controller and its HV startup on the primary side, a 1-phase/3-phases smart meters, industrial systems, and lighting power supplies.
microcontroller, and all the peripherals required to control the conversion and the
The Altair series has a built-in 800/900 V avalanche-rugged power MOSFET and a PWM controller specifically designed to work
USB-PD communication on the secondary side. The two sides are connected through
in constant-current/constant-voltage primary-side regulation (PSR-CC/CV). It offers opto-less implementation, thus significantly
an embedded galvanically isolated dual communication channel. By using a novel non-
reducing component count.
complementary control technique and specifically designed power modes, the device
enables high efficiency and low no load power consumption.
1050 V 10 W VIPer26K Very High Voltage SMPS
The device is delivered with pre-loaded firmware that handles both the power conversion Embedded E/A for direct output regulation/fly-back or buck converter
and the communication protocols for USB-PD including optional PPS and electronically
900 V 7W Altair04 Accurate Primary Side Regulation
marked cable management. Constant current/constant volatage
Flyback VAUX
Flyback Buck Converter
Primary side regulation Secondary side regulation Up to 600 mA Output Current
EA (IN)
KEY FEATURES & BENEFITS integrated 24 V USB-PD PHY >30 W/inch3 power density
• All-in-one digital controller for USB-PD • >94 % peak efficiency soft switching • 32bit Cortex M0+ core with 64 kB VIPer01-11-31 VIPer122-222 VIPer01-11-31 VIPer122-222 VIPer28-38 VIPer01-11-31 VIPer122-222
chargers up to 100 W topology embedded flash memory
• ZVS Active Clamp Flyback + • >1 Mhz operation with MasterGaN and • >6.4 kV reinforced galvanically VIPer26K VIPer06-16-26 VIPer26K VIPer06-16-26 VIPer25-35 VIPer26K VIPer06-16-26
Synchronous rectification planar transformers isolated dual communication channel
• USB-PD 3.1 PPS interface and • Small weight and size solution with Altair04-05 VIPer0P VIPer27-37 VIPer0P VIPer122-222 VIPer0P
MAIN APPLICATIONS
MAIN APPLICATIONS
Tablet AC chargers Smartphone AC chargers Power Adapter for laptops Wall plug USB-C chargers
and desktops
www.st.com/ac-dc-converters
www.st.com/pfc-controllers
Note: * is used as a wildcard character for related part number
60 61
PFC controllers PWM and resonant controllers
ST power factor correction (PFC) controllers operate in transition mode (TM, suitable for P ≤250 W) and continuous current ST portfolio of advanced controllers includes a variety of primary controllers intended to fit high-performance applications. Very high
mode (CCM, suitable for P >250 W), and are suitable for wide-range-mains operation. efficiency is achieved with single-ended topologies at a fixed switching frequency or with quasi-resonant operation. The new STCH03
These devices embed advanced protection features, which make the SMPS more robust and compact, requiring fewer offline constant-current primary-side regulation controller (PSR-CC) guarantees very low power consumption at no load condition.
external components. These features include output overvoltage, brown-out, feedback disconnection, and boost inductor For high-power, high-current applications, ST offers controllers for half-bridge resonant and asymmetrical half-bridge topologies. The
saturation protection.The high-voltage start-up capability present in the L6564H and L6563H helps improve the SMPS standby STCMB1 and STNRG011 combo controllers with high-voltage start-up, Xcap discharge circuit, and PFC and resonant driving stages,
efficiency in systems that do not include an auxiliary power supply. guarantee high performance and high integration with a smaller pinout. The new STNRG012 is specifically designed to support LED
lighting and industrial applications requiring DC source management, with additional THD optimizer function.
TM PFC controllers
Flyback controllers Analog combo controller (PFC+LLC/LCC)
Remote Tracking Interface for
IL Basic Advanced on/off boost cascaded STCH03 STCMB1
features protections control function converter
IAC
• Offline quasi-resonant controller in SO-8 package • 800 V start-up voltage
L6562A* • Constant-current primary-side regulation mode (PSR-CC) • Embedded X-cap discharge circuit
or constant-voltage regulation with optocoupler • Transition Mode (TM) PFC control method
• Advanced burst mode operation (< 10 mW consumption @ no load) • Enhanced fixed on time TM PFC controller
L6564* • UVP, autorestart/latched OVP and internal OTP • Self-adjusting dead-time and anticapacitive mode
• 650 V HV start up for LLC
• Time-shift control of resonant half-bridge
L6563* L6566*
Asymmetrical half-bridge controller
• Offline fixed-frequency or quasi-resonant controllers
CCM PFC controllers
• Suited for SMPS with PFC front-end (A version) L6591
IL • Suited for SMPS with 3-phase mains (BH version)
L4984D Line-modulated, fixed-off-time (LM-FOT) control
IAC • 700 V start up (A/B version), 840 V start up (BH version) • PFC interface
• Brownout protection • Brown out
• 700 V start-up voltage
L4981A Fixed frequency, average-current mode
L6565
L6599A*
MAIN APPLICATIONS
MAIN APPLICATIONS
Tablets and smartphones Laptops High-power adapters and TVs Desktop PCs, commercial
Adapters and TVs Commercial and street lighting Desktop PCs and Server L6565, L6566*, STCH03 L6565, L6566*, STCH03, L6565, L6566*; L6599A*, and street lighting
L6562A*, L6563*, L6564, L6562A*, L6563*, L6564*, L4985, L4986, STCMB1 L6699, STCMB1 L6599A*, L6699, STCMB1
L4985, L4986 L4985, L4986, L4981*, L4984D L4981*, L4984D
www.st.com/ac-dc-converters www.st.com/ac-dc-converters
www.st.com/pfc-controllers www.st.com/pwm-controllers
Note: * is used as a wildcard character for related part number Note: * is used as a wildcard character for related part number www.st.com/resonant-controllers
62 63
Synchronous rectification controllers Signal conditioning
Synchronous rectifiers are used to drive power MOSFETs that replace the rectification diodes in the secondary side of SMPS, Signal conditioning devices include Operational Amplifiers and Current Sense Amplifiers. These devices
thus providing high efficiency especially in low-output-voltage, high-current power supplies. enable accurate and fast current measurement in power supplies. Comparators are also very powerful allies
The product portfolio supports the most common flyback and LLC resonant topologies. The main benefits include high of the power supply designer to implement protection features such as over-temperature, over-current, and
efficiency, space saving, cost reduction, and high reliability. over/under voltage.
MAIN APPLICATIONS
High-power adapters and TVs Desktop PCs and Server/Telecoms
SRK1000, SRK1001 SRK2000A, SRK2001, SRK2001A
64 65
BATTERY MANAGEMENT ICs Wireless charging ICs
ST fully covers wireless charging applications with dedicated ICs for both transmitter and receiver. The
Battery chargers and battery monitoring ICs STWBC, compatible with Qi standard, and the STWBC86 dedicated to wearable applications, make up the
ST battery chargers are specifically designed for the portable and mobile markets and add value to new designs by ST wireless power transmitters (Tx) family. The receiver family (Rx) consists of the STWLC38 dedicated to Qi
minimizing power consumption and reducing the space on the PCB. These products offer charge currents from as little as 40 compliant consumer applications, the STWLC86 and the STWLC98 for higher power applications.
mA up to 1.2 A and can be used for any rechargeable lithium-ion and Li-Polymer battery. Using very simple topologies, some
of these devices also feature a power-path function, offering instant-on operation and thermal regulation according to the Wireless charger transmitter ICs Wireless charger receiver ICs
JEITA international standard.
STWBC2-HP STWBC86 STWLC38 STWLC86 STWLC98
Battery chargers
STWBC2-HP STWLC38
• Supports applications up to 70 W • Qi 1.3 compatible • Supports up to 5 W in Tx mode
• Qi 1.2.4 / 1.3 compatible • Supports up to 15 W Rx for Qi (coil dependent)
Linear charger for Li-Ion and
1A L6924U L6924D • Qi certified reference design with MP-A2 Extended Power Profile • ARC (Adaptive Rectifier
Li-Polymer battery packs
topology and supports MP-A22 • Supports up to 5 W Rx for Qi Configuration) mode for
STBC08 Thermal regulation, Baseline Power Profile enhanced spatial freedom
0.8 A STC4054
USB power specification supported
0.65 A STBC03 LDO integrated, USB compatible, Power path STWBC86 STWLC86/98
Linear
LDO integrated, USB compatible, battery charger • Optimized for standard Qi Baseline Power • Qi 1.3 compatible • ARC (Adaptive Rectifier
0.45 A STBC02 Profile (BPP) applications for up to 5 W • Supports up to 30 W (STWLC86) Configuration) mode for
Power path, Swire
• Monolithic solution with integrated full- /70W (STWLC98) Rx enhanced spatial freedom
0.2 A STNS01 LDO integrated, USB compatible bridge inverter • ARM 32-bit Cortex™-M3 core
• Supports up to 7.5 W (STWLC86)
Ultra low power for ThinFilm • Popular applications are not only Tx for /15 W (STWLC98) in Tx mode up to 64 MHz (STWLC98)
0.04 A STBC15
and Li-Ion batteries public spaces like restaurants, offices, and (coil dependent) • Optimized device size (STWLC98)
airports, but also chargers for wearable • Embedded OS for Qi 1.3
and hearable devices standalone certification (STWLC98)
STBC02/ • Embed a linear battery charger, a 150 mA LDO, 2 SPDT load switches and a protection circuit module
STBC03 • STBC02 embeds a smart reset/watchdog and a single wire interface for IC control Common features
• Use a CC/CV algorithm with programmable (only STBC02) fast charge, precharge and termination current
Vbus Digital Digital bridge • Industry leading efficiency • GUI for run-time analysis, tuning
monitor controller controller • Accurate foreign object and basic customization
• Microbatteries charging and monitoring circuit 5 or 3.3 V Topology specific Temperature detection (FOD) • Firmware customization via API
STBC15
• Charging current up to 40 mA (set by dedicated pin) input firmware protection • Best-in-class power • Robust device protection from
• 150 nA quiescent current (including Qi consumption with smart over-voltage, over-current and
2x LED certification) Overcurrent
standby over-temperature events
protection
ST battery fuel gauge ICs can be located in the battery pack or in the handheld
device and integrate functions to monitor the battery voltage, current, and ADC Signal and
FUEL GAUGE ICS MAIN BENEFITS
temperature. Using a built-in Coulomb counter, these fuel gauge ICs calculate protocol
• 3% accuracy of battery state of GPIOs
battery charge and store the data in 16-bit register resolution for retrieval by the demodulator
system controller. Access is via an industry-standard I2C interface, enabling the charge no need for shunt resistor UART FOD
controller to create an accurate graphical representation of the remaining battery- • Accurate estimation of battery
operating time. state of charge at power-up I2C Active object
• Reliable battery swap detection Customizable STWBC detector
• OptimGauge algoritm for STC3115
STC3115 • SoH and impedance tracking with
• OptimGauge+ algorithm for SCT3117
OptimGauge+ algorithm (ST IP)
• Coulomb counter and voltage gas gauge operations
• Charger enable and system reset
STC3117 • Programmable low battery alarm control for accurate OCV reading
• Internal temperature sensor
MAIN APPLICATIONS
MAIN APPLICATIONS
Wireless charger transmitters Smartphones, Tablets, and Laptops Wearables and Hearables
Bluetooth accessories USB Fitness Smartphones STWBC2-HP, STWBC86 STWLC86, STWLC98 STWLC38, STWBC86
STC4054 L6924U, STC4054, STBCFG01 STNS01, STBC02, STBC03 STBCFG01, STC3115, SCT3117
66 67
DC-DC SWITCHING CONVERSION ICs DC-DC controllers
ST offers a wide portfolio of DC-DC switching controllers for server and telecom applications according to market
DC-DC converters requirements: single-phase controllers with embedded drivers, advanced single-phase controllers with embedded non-volatile
ST offers a wide portfolio of monolithic DC-DC switching converters (i.e., controller and MOSFET in the same memory (NVM), and our newest controllers with or without SPS (Smart Power Stage) compatibility, as well as multiphase digital
package). This broad portfolio of ICs consists of highly specialized products to meet every market requirement. controllers for CPU & DDR memory power supplies.
High reliability and robustness for industrial (factory automation, UPS, solar, home appliances, lighting, etc.)
and other high-voltage applications. High efficiency at any load and a high level of performance for consumer Single-phase Buck controllers
(smartphones, digital cameras, portable fitness devices, LED TVs, set top boxes, Blue-ray players, computer & Vin Vout
storage, etc.) and server/telecom applications. L6726A Single-phase cost effective PWM controller
ST*N6F7
Vin Vout Vin Vout DC-DC CONVERTERS A6727 Single-phase cost effective PWM controller for automotive applications
Controller ST*N6F7
MAIN FEATURES
• Up to 61 VIN/3 A Single-phase PWM controller with embedded driver and light load
L6739 efficiency optimization
Controller Controller STPS* • Synchronization capability
Single-phase buck controller
• Internal compensation
PM6680 Dual-output PWM controller up to 36Vin
• Low consumption
• Adjustable fsw
Synchronous buck converter Asynchronous buck converter
• Internal soft start
• Low quiescent current Multi-phase Buck controllers
Fully digital buck controller
PM676* with PMBus for CPU/DDR Vin
L3751 ST*N6F7
Fully digital buck controller Ph 1
Buck-Boost STBB* PM677* Vout
with PMBus for advanced CPU/ Driver
Boost STOD1317 L6920* STOD1812 ST8R00W DDR
L6981
ST*N6F7
Vin
L6983
ST*N6F7
L6982
Ph 2
PM6641 ST1S10 A/L7986 Driver
ST1S12 ST1S31* ST1S06 ST1S4* A/L7985
Buck
ST1S15 ST1S3* ST1S09 ST1S50 STPM066S A/L6984 A/L6985 Controller ST*N6F7
ST2S* L692* PM890* ST1S03 L598* L9396 STPD01 PM6644 L5965 L597* A/L6986 ST1S14 L497* A/L7987*
ST1PS02 L7983
MAIN APPLICATIONS
Set-top boxes Wearables Server/Telecom Home Factory automation Server Microserver Telecoms PC desktop
appliances
www.st.com/dc-dc-switching-converters
www.st.com/single-phase-controllers
www.st.com/dc-dc-switching-converters www.st.com/multi-phase-controllers
Note: * is used as a wildcard character for related part number Note: * is used as a wildcard character for related part number
68 69
Highly integrated power management IC for micro-processor units
STPMIC1, a high performance fully integrated power management IC, is the ideal companion chip of the
STM32MP1 microprocessor series, being also optimized for power applications requiring low power and high
efficiency. The STPMIC1 integrates buck and boost converters, linear regulators with sink/source capability,
power switches specifically designed to supply all required power rails for the STM32MP1 and for other
components on the board such as DDR, Flash memory, Wi-Fi and Bluetooth connectivity ICs, providing a total
system solution.
STPMIC1 versions
5 V power supply Battery power supply Custom application, 5 V power supply Battery power supply
application application no output turned ON application application
STPMIC1A STPMIC1B STPMIC1C STPMIC1D STPMIC1E
Default output Default output Default output Default output Default output
Rank Rank Rank Rank Rank
Voltage (V) Voltage (V) Voltage (V) Voltage (V) Voltage (V)
LDO1 1.8 0 1.8 0 1.8 0 1.8 0 1.8 0
LDO2 1.8 0 2.9 2 1.8 0 1.8 0 1.8 0
LDO3 1.8 0 1.8 0 1.8 0 1.8 0 1.8 0
LDO4 3.3 3 3.3 3 3.3 0 3.3 3 3.3 3
LDO5 2.9 2 2.9 2 1.8 0 3.3 2 2.9 2
LDO6 1.0 0 1.0 0 1.0 0 1.0 0 1.0 0
REFDDR 0.55 0 0.55 0 0.55 0 0.55 0 0.55 0
BOOST 5.2 N/A 5.2 N/A 5.2 N/A 5.2 N/A 5.2 N/A
BUCK1 1.2 2 1.2 2 1.1 0 1.2 3 1.2 3
BUCK2 1.1 0 1.1 0 1.1 0 1.1 0 1.1 0
BUCK3 3.3 1 1.8 1 1.2 0 3.3 1 1.8 1
BUCK4 3.3 2 3.3 2 1.15 0 1.2 2 1.2 2
Rank = 0: rail not autom. turned ON Rank = 1: rail autom. turned ON after 7 ms
Rank = 2: rail autom. turned ON after further 3 ms Rank = 3: rail autom. turned ON after further 3 ms
VTT LPDDR2/3
VDD2
2.8 to 5.5 V (0,75 V/0.625 V) DDR3/DDR3L
VREF
PWR SW1 PWR SW2 BUCK4 LDO5 LDO2 LDO1 LDO6 PMIC CONTROL:
VBUSOTG SWOUT 0.6 - 3.9 V 1.7 - 3.9 V 1.7 - 3.3 V 1.7 - 3.3 V 0.9 - 3.3 V • I2C
@ 0.5 A @1A @2A @ 350 mA @ 350 mA @ 350 mA @ 350 mA • INTn
• WAKEUP
• POWER ON
USB OTG GP PWRSW GP DC/DC GP LDO GP LDO GP LDO GP LDO • RESETn
Vbus (USB Vbus) (Peripherals) (user app.) (SD card) (user app.) (LCD analog)
MAIN APPLICATIONS
70 71
DIGITAL POWER CONTROLLERS AND MICROCONTROLLERS Microcontrollers for digital power
The 32-bit microcontrollers most suitable for power management applications are the STM32F334 and the STM32G474 MCU
STNRG Digital Power Controllers from the mixed-signal STM32F3 series and STM32G4 series, the STM32H743 MCU from the high performance STM32H7
The high level of integration of today’s latest features and functions make STNRG011, STNRG11A, and STNRG012 ideal for series, and those of the entry-level STM32G0 series.
SMPS and lighting applications required to comply with the most stringent energy-saving regulations and guarantees high The STM32G0 series has a 32-bit ARM® Cortex®-M0+ core (with MPU) running at 64 MHz, and is well suited for cost-sensitive
reliability, safety and BOM optimization. Configurable through an intuitive GUI, ST STNRG digital controllers provide high-end applications. STM32G0 MCUs combine real-time performance, low-power operation, and the advanced architecture and
performance and flexibility and do not require any firmware implementation. All the key application parameters of the device peripherals of the STM32 platform.
are stored in an internal NVM, allowing wide configurability and calibration. The STM32F3 series MCU combines a 32-bit ARM® Cortex®-M4 core (with FPU and DSP instructions) running at 72 MHz with
a high-resolution timer and complex waveform builder plus event handler.
Simplified 2-stage digital smps design with high performance and low component count
The STM32G4 series with 32-bit ARM® Cortex®-M4 core running at 170 MHz continues the STM32F3 series, keeping
leadership in analog, leading to cost reduction at the application level and a simplification of the application design.
Traditional ~AC Active PFC Primary Synchronisation CC / CV Finally, the STM32H7 series has a 32-bit ARM® Dual core Cortex®-M7 + Cortex®-M4 (480 MHz + 240 MHz) or single-core
x-cap rectification Load
partitioning main with HV start up controller controller Cortex®-M7 (480 MHz) with precision FPU, DSP, and advanced MPU.
discharge IC driver
STM32 F3, G4, and H7 series contain a flexible high-resolution timer to generate highly accurate pulse-width modulated
(PWM) signals for stable control of switched-mode power circuits.
With ~AC Synchronisation These MCUs specifically address digital power conversion applications, such as digital switched-mode power supplies,
CC / CV Load
rectification controller lighting, welding, solar, wireless charging, motor control, and much more.
STNRG011 main IC driver
MAIN APPLICATIONS
STM32H743 MAIN APPLICATIONS
• Cortex®-M7 core
• High performance up to
TV Power Supply and High power adapters LED Lighting Industrial and medical 480 MHz
Emergency Lighting Energy Welding Commercial, architectural Server/ UPS
All-in-One STNRG011, STNRG012 equipment • High resolution timer V1 (2.1ns
STNRG012 resolution) for real time control Generation and and street lighting Telecom
STNRG011, STNRG011A STNRG011A STNRG012 Distribution
• High-speed ADCs for precise
and accurate control (3.6 Msps)
www.st.com/stm32 STM32 Digital Power Ecosystem
72 73
Automotive microcontrollers for in-car digital power AutoDevKit, a viable, simple, low-cost toolset for automotive application engineers
SPC5 automotive microcontrollers are suited for in-car digital power applications, such as traction inverters, on-board AutoDevKit is a new development flow and toolset dedicated to the Automotive & Transportation market, offering engineers
chargers, bidirectional DC/DC, and Battery Management Systems. the best and easiest approach to quick evaluation and rapid prototyping in a common, integrated, and flexible environment
SPC58 E-line combines real-time behavior with ISO26262 ASIL-D safety. supporting complete ECU-like development.
The embedded hardware security module (HSM) ensures protection against cyber security attacks. AutoDevKit is an Eclipse plugin running under the SPC5Studio Integrated Development Environment.
The Generic Time Module (GTM) completes the peripheral set by delivering a high-performance timer, synchronization units,
embedded hardware DPLL, and micro-cores.
SPC58 Chorus family provides a connected, secure, and scalable platform delivering a wide range of communication
interfaces and low-power capabilities to complete the in-car connectivity needs.
SPC58
E Line
Triple
Core
3x e200z4d @ 180 MHz
eFlash Code 4 MB to 6 MB
Timers GTM3
Safety ASIL-D
8x CAN-FD
Advanced Networking FlexRay
2x Ethernet
Security HSM medium
5x 12 bit (SAR)
ADC 3x 10 bit (SAR)
6x 16 bit (SigmaDelta)
High Temperature support (165 Tj) Qualified
MAIN APPLICATIONS
Vehicle Software Parking Remote Maintenance Safety HEV Find out more at www.st.com/autodevkit
Security over-the-air Services Assistance free Software download www.st.com/autodevkitsw
Join our Community at https://community.st.com/autodevkit
74 75
DIODES AND RECTIFIERS SiC diodes
ST Schottky and Ultrafast diode portfolio includes 650 to 1200 V SiC and 45 to 100 V field-effect rectifier In addition to ensuring compliance with today’s most stringent energy efficiency regulations (Energy Star, 80Plus, and European
diodes (FERD), ensuring that designers can take advantage of the very latest technologies to develop cost- Efficiency), ST silicon carbide diodes feature four times better dynamic characteristics with 15% less forward voltage (VF) than
efficient, high-efficiency converter/inverter solutions. Depending on the targeted application and its voltage, standard silicon diodes. Silicon carbide diodes belong to the STPOWER family.
developers can choose from a wide range of devices to ensure the best compromise in terms of forward voltage The efficiency and robustness of solar inverters, motor drives, uninterruptible power supplies, and circuits in electrical vehicles are
drop (VF) and leakage current (IR) as well as other characteristics. therefore greatly improved by the use of silicon carbide (SiC) diodes.
ST proposes a 600 to 1200 V range with single and dual diodes in packages ranging from DPAK to TO-247, including the ceramic
insulated TO-220 and the slim and compact PowerFLAT 8x8 featuring excellent thermal performance and representing, the new
AEC-Q101 automotive-grade qualified diodes and rectifiers >
standard for high-voltage (HV) surface-mount (SMD) packages and available for 650 V SiC Diodes from 4 to 10 A.
Current
I0 (A)
SIC DIODES BENEFITS
240 A • High efficiency adding
value to the power
200 A converter
Ultrafast bipolar • Reduced size and cost of
rectifiers the power converter
Power Schottky diodes SiC diode • Low EMC impact,
ST tandem diode
simplifying certification and
60 A speeding time to market
Bridge
40 A diodes Time • High robustness ensuring
30 A high reliability of the power
Field-effect converter
20 A SiC diodes
rectifiers Si diode • Gain on PCB and mounting
4A cost with the dual diodes
3A
1A
>1 A Signal Schottky diodes
SiC diodes provide zero recovery time
15 V 40 V 60 V 100 V 150 V 200 V 600 V 1200 V VRRM (V) with negligible switching losses
Field-effect rectifiers (FERD) Power Schottky diodes Ultrafast rectifiers 650 V SiC diodes in insulated TO-220 packages: the solution to speed production
Low voltage diodes, Power Schottky diodes Ultrafast high voltage
FERD* for high efficiency and STPS* for low voltage general STTH* diodes for general
STPSC*065 STPSC*H12
high power density purpose applications purpose application
• 650 V (STPSCx065)
applications
• 1200 V (STPSC*H12)
• 2 available trade-offs, low VF and High surge
MAIN APPLICATIONS
Adapters and TVs Battery Solar inverters, welding, HEVs, and Residential, commercial,
chargers UPS architectural and street lighting
MAIN APPLICATIONS
PC Desktop and Server/ HEV charging Factory Home Consumer Solar inverters HEV UPS Charging Station Server/Telecoms and PFC
Telecoms stations automation appliances electronics STPSC*065, STPSC*H12 STPSC*065 STPSC*065, STPSC*H12 STPSC*065, STPSC*065, STPSC*H12
STPSC*H12
www.st.com/schottky
www.st.com/ultrafast-rectifiers
www.st.com/field-effect-rectifier-diodes www.st.com/sic-diodes
Note: * is used as a wildcard character for related part number Note: * is used as a wildcard character for related part number
76 77
eFuses AND HOT-SWAP ICs Power breakers
Connected in series to the power rail, ST power breakers are able to disconnect the electronic circuitry when power
eFuses consumption exceeds the programmed limit. When this happens, the device automatically opens the integrated power switch,
eFuses are electronic fuses that can replace larger conventional fuses or other protections, reducing disconnecting the load, and notifies the remote monitoring feature.
ownership costs in production and in the field. The STPW programmable electronic power breaker family provides a convenient and integrated solution for quickly and safely
Unlike fuses, they offer complete and flexible management of the fault (overcurrent/overvoltage) without disconnecting a faulty load from a 12 V bus.
requiring replacement after actuation. They thus help improve equipment uptime and availability, and also Inserted between the power rail and the load, STPW power breakers contain a low-resistance (50 mΩ) power switch and
reduce maintenance costs and false returns. Compared to traditional protection devices, these new electronic precision circuitry for sensing the load power. If the user-programmed limit is exceeded, the switch turns off and a signal on the
fuses enable versatile and simple programming of protection parameters such as overcurrent threshold and dedicated monitor/fault pin informs the host system. In normal operation, this output presents an analog voltage proportional
start-up time. to the load power to permit continuous monitoring.
eFuse Also featuring built-in auto-restart after a user-adjustable delay and programmable PWM masking time to prevent protection
eFuse MAIN FEATURES triggering by inrush current, the STPW family simplifies design for safety and eases certification for standards such as the UL
Vcc Vcut/Source 60730 specifications for abnormal operation. This integrated solution effectively replaces discrete circuitry or a combination
• Do not degrade or require of ICs such as a current-sense amplifier or a hot-swap controller plus MOSFET switches, by offering improved accuracy and
CIN COUT replacement after a trip event saving board space and bill of materials for each load protected.
R-lim Load • Programmable over-current
EN/fault
Controller I-limit protection and turn-on time Power breakers
• Latched or autoretry function
• Overvoltage clamp STPW12
dV/dT UVLO
VIN
• Over-temperature protection • Auto-retry function with programmable EN
CdV/dT • Integrated power device delay
GND
• Internal undervoltage lockout • Adjustable precise power limitation Thermal
from 11 to 16 W shutdown
• 12 V rails
www.st.com/efuse PWM VIN VOUT
• Programmable power limit masking time PWM
LOGIC Rset
eFuses, a smart offer for a lots applications • Over-temperature protection
Typical voltage rail (V)
Legend: Power Breaker
• Integrated N-channel power MOSFET
(Not to scale)
Standard eFuses • Internal undervoltage lockout Rdelay GND Cset Monitor/Fault
Dual rail 5 V + 12 V
80
Fully programmable Typical home appliance block diagram for STPW12
48 3,3 V or 5 V rail
3.3 V
Low side timed switch
12 V MCU
16 STEF01 High power eFuse AC/DC 5V
STEF12
Controlled load switch
EN
12 STPW12 STEF12S
STEF12E STEF12H60M PWM
STEF512GR
STPW12
STEF05
STEF512PUR
STELPD01 Imon
STEF512SR
STEF05D
5 STEF05S STEC01 STEL12H24 EN, PWM, Subsystem 1
(Safety IC) (UI, display, control panel, connectivity)
STEF05L Imon
STEF4S
STPW12 Subsystem 2
(Fans, other motor driver, relay driver)
3.3 STEF033
Continuous current (A)
(Not to scale) STPW12 Subsystem n
(.......)
1.5 3 4 5 7 24 60
MAIN APPLICATIONS
MAIN APPLICATIONS
Home appliances Server and Data Storage USB connections Factory automation Set-top boxes
STEF05, STEF01, STEF033, STEF05, STEF05L, STEF05, STEF05L, STEF01, STEF12,
STEF12, STEF12S STEF4S, STEF12, STEF05S, STELPD01 STEF12, STEF12S, STEF12S
STEF05S, STEF12S, STELPD01 Home appliances Air conditioning Factory automation
STEF512, STEF512SR, STPW12 STPW12 STPW12
STEL12H24
78 79
GALVANIC ISOLATED SIGMA-DELTA ADC
The galvanically isolated ISOSD61/ISOSD61L second order Sigma-Delta modulator,
based on the highly successful ST transformer coupling technology, is available in the
single-ended (ISOSD61) and differential (ISOSD61L) signaling versions. It converts
analog input signals into high-speed single-bit digital data streams, from which analog
information can be recovered by a low-pass filter and further processed by a host
controller. The modulator protects the output peripheral interface with a galvanic isolation
barrier that separates low and high voltage domains and blocks stray currents between
different grounds. The silicon-based isolation technology offers a number of advantages
over traditional opto-coupling, including significantly lower power consumption, higher
data transfer rates, and greater reliability for longer device lifetime, and over Hall-effect
sensors in terms of accuracy, noise rejection, latency, form factor, and cost.
VDDISO VDD
Vin + MDAT+
∑∆ modulator
Vin –
Galvanic Isolator MDAT–
Galvanic Isolator
Low Voltage side
High Voltage side
LVDS transceivers MCLKIN+
Digital
Vref MCLKIN–
Controller
GNDISO GND
KEY FEATURES
• 2nd order 16-bit Sigma-Delta • - 83 dB typical THD • 1.2 kV VPEAK Maximum Working
Modulator • 30 kV/μs typical Common-Mode Insulation Voltage (VIORM)
• ±320 mV Full Scale Differential Input Transient Immunity • Flexible interface options: Low Voltage
Signal Range • 6 kV VPEAK Highest Allowable Over- Differential Signaling (LVDS) and Single
• Up to 25 MHz external clock input for Voltage (VIOTM) Ended (TTL/CMOS) options
easier synchronization • 6 kV VPEAK Maximum Surge Insulation • –40 °C to +125 °C extended industrial
• Up to 50 kHz Bandwidth Voltage (VIOSM) temperature range
• 86 dB typical SNR • SO-16 wide package
Product table
Max. Clock
Part Number Version Input Range Resolution SNR Isolation CMTI Package & Packing
Frequency
ISOSD61 TTL/CMOS SO16W Tray
ISOSD61TR TTL/CMOS SO16W Tape & Reel
±320 mV 25 MHz 16-bit 86 dB 1.2 kV Viorm 30 kV/us
ISOSD61L LVDS SO16W Tray
ISOSD61LTR LVDS SO16W Tape & Reel
MAIN APPLICATIONS
Servo drive Factory automation EV charging station Server & telecom power
80 81
IGBTs H series V series M series
ST offers a comprehensive portfolio of IGBTs (Insulated Gate Bipolar Transistors) ranging from 600 to 1700 V in trench gate STG*H* STG*V60*F STG*M*
field-stop (TGFS) technologies.
Featuring an optimal trade-off between switching performance and on-state behavior (variant), ST IGBTs are suitable for H* - 600 V family • Optimized for high 650 V family
industrial and automotive segments in applications such as general-purpose inverters, motor control, home appliances, HVAC, switching frequencies
UPS/SMPS, welding equipment, induction heating, solar inverters, traction inverters, on-board chargers, and fast chargers.
• 3 µs of short-circuit capability • 6 µs of min short-circuit capability @ starting TJ =
• Low saturation voltage • Negligible current tail at 150 °C
Industrial turn-off • Wide safe operating area (SOA)
• Minimal collector turn-off
• Very low turn-off • Very soft and fast recovery antiparallel diode
Breakdown Voltage • Series optimized for home appliance switching losses
600 V 650 V 1200 V 1250 V 1700 V applications • Suitable for any inverter system up to 20 kHz
• Soft and very fast
recovery antiparallel AEC-Q101 qualified devices
Nominal Current
H - 1200 V family diode
4 to 20 A 20 to 80 A 4 to 200 A 15 to 100 A 20 to 50 A 8 to 75 A 15 to 75 A 20, 30 A 50 A (bare die) • 5 µs of short-circuit capability @ 1200 V family
• Up to 100 kHz in hard
Switching frequency starting switching topologies • 10 µs of min short-circuit capability @ starting TJ =
TJ = 150 °C 150 °C
8 to 30 kHz 50 to 100 kHz 2 to 20 kHz 16 to 60 kHz 2 to 20 KHz 20 to 100 kHz 16 to 60 kHz 2 to 20 KHz • AEC-Q101 qualified
• Low turn-off losses device • Freewheeling diode tailored for target application
IGBT Series
• Up to 100 kHz as switching frequency • Suitable for any inverter system up to 20 kHz
H V M HB/HB2 IH M H IH M
Focus Applications HB series HB2 series IH series
Industrial
Welding, motor Welding, Induction STG*H*B STG*H*FB2 STG*IH*
PFC, Solar, Induction Industrial Industrial
PFC, control, PFC, heating,
Home UPS, Charger, heating motor motor • Low saturation voltage • Very low saturation voltage 650 V IH family
solar, automotive solar, microwave
appliances Welding and and soft control, control,
UPS, traction UPS, and soft • Minimal tail current turn-off • Reduced gate charge • Very low VCE(sat): 1.5 V @ ICN
soft switching switching GPI, Air-Con GPI, Windmill
charger inverter, charger switching
• Different diode option • Different diode option • Very low Eoff
GPI, Air-Con
• Optimum trade-off between • Optimum trade-off between • Low drop forward voltage diode
conduction and switching losses conduction and switching losses • Designed for soft commutation
• Low thermal resistance • Low thermal resistance application only
• 4 leads package available • 4 leads package available 1250 V IH family
Automotive • Very high robustness in final • High efficiency in final application • Minimized tail current
application • Automotive eligible
Breakdown Voltage • Very low drop freewheeling diode
• Automotive eligible
600 V 650 V 750 V 1200 V • Tailored for single-switch topology
Nominal Current MH series MS series
20 to 80 A 30 to 200 A 20 to 80 A 15 to 100 A 200 to 500 A 15 to 40 A
STG*MH* STG*MS*
Switching frequency
50 to 100 kHz 2 to 20 kHz 16 to 60 kHz 2 to 20 KHz 2 to 20 KHz • Increased BV robustness and current density • Designed for automotive application
IGBT Series • Low VCE(sat) = 1.3 V (typ.) @ IC = 300A • 8 µs of short-circuit withstanding time @
V M HB HB2 (eligible) MH MS • Integrated Kelvin and current sensing option VCC=800 V, VGE=15 V,TJ-start=150 °C
• Enhanced switching performances • Maximum continuous operating junction
Focus Applications temperature: TJ=175 °C
• Dice top and back metallization suitable for high performance linking
• Low VCE(sat) = 1.95 V (typ.) @ IC = 40A
Motor Control, • High current and temperature fully tested
Traction inverter, Aux loads, • Rebuilt wafers for customized modules
OBC Motor Control, OBC (PFC), EV, HEV PTC heaters,
(PFC section) Aux loads, Air-Con Traction inverter Battery
PTC heaters thermal
management MAIN APPLICATIONS
Development
Welding Solar UPS Home appliances Air conditioning Motor control Induction heating
www.st.com/igbt
Note: * is used as a wildcard character for related part number
82 83
INTELLIGENT POWER MODULE - SLLIMM
The SLLIMM, small low-loss intelligent molded module, is the ST family of compact, high efficiency, dual-in-line intelligent
power modules (IPM) with extra optional features. This family includes different solutions in terms of package (SMD,
through hole, full molded, and DBC) and silicon technology (IGBT, MOSFET and superjunction MOSFET). Optimally balancing
conduction and switching energy with an outstanding robustness and EMI behavior makes the new products ideal to enhance
the efficiency of compressors, pumps, fans, and any motor drives working up to 20 kHz in hard switching circuitries and for an
application power range from 10 W to 7 KW.
Power rating: Power rating: Power rating: Power rating: Power rating:
10 to 80W 60 to 110W 100 to 600W 300W to 3kW 3 to 7kW
www.st.com/igbt
84 85
INTELLIGENT POWER SWITCHES
STMicroelectronics offers intelligent power switches (IPS) for low- and high-side configurations. ST IPS feature a supply
voltage range from 6 to 60 V, overload and short-circuit protection, current limitation set for industrial applications, different
diagnostic types, high-burst, surge and ESD immunity, very low power dissipation, and fast demagnetization of inductive
loads.
The devices are designed using ST latest technologies for state-of-the-art solutions in any application field.
DCVDD VREF
IPS MAIN FEATURES
PHASE DC/DC • Logic
converter Undervoltage
BOOT Vcc • Driving
detection
FB • Protections
SDI/IN5 Vcc-out clamp • Diagnostic
SS/IN7 • Power stage
CLK/IN6 • Isolation
SDO/IN8 SPI ...all an a single chip
WD/IN4 parallel Logic Current limit Output 1..8
OUT_EN/IN3 watchdog Junction temp
WD_EN/IN2 detection X8 www.st.com/ips
SEL1/IN1
SEL2 LED Case temp Vcc
driving detection clamp
5 IPS1025H(Q)-32² IPS2050H(Q)-32²
MAIN APPLICATIONS
86 87
LED DRIVERS DC-DC LED drivers
ST monolithic buck switching regulators offer input voltage capability up to 61 V and deliver output currents up to 4 A with high
Offline LED drivers switching frequency. They enable simple, efficient, and cost-effective solutions for driving high-brightness LEDs. They also
Dedicated LED drivers operating from the AC mains ensure highly accurate LED control to provide a high level of light feature dedicated circuitry for dimming. Boost regulators provide the necessary high voltages to drive multiple LEDs in series,
quality and avoid flickering. By combining state-of-the-art low-voltage technology for the controller and extremely robust guaranteeing accurate LED current matching.
800 V technology for the power MOSFET in the same package, HVLED8* converters (i.e., controller + MOSFET in the same
package) feature an efficient, compact, and cost-effective solution to drive LEDs directly from the rectified mains. This family DC-DC LED drivers converters
of converters works in constant-current/constant-voltage primary-side regulation (PSR-CC/CV). HVLED001A and HVLED001B Buck Buck-boost IoutMax Dimming VinMax Synchronous
controllers are also available for high power needs working in constant-voltage (PSR-CV) primary-side regulation; a dimming
function is also available. For both families (HVLED converters and controllers), the primary-side regulation cuts bill-of-material LED2000 3A 18 V
costs, while also simplifying design and reducing the space occupied by LED control circuitry.
LED2001 4A 18 V
Offline LED converters with PSR
Internal power
HPF PSR-CC PSR-CV PoutMax* MOSFET Flyback Buck-boost ST1CC40 3A 18 V
MAIN APPLICATIONS
MAIN APPLICATIONS
www.st.com/led www.st.com/led
Note: * output power for european input voltage 230 Vac
88 89
LED array drivers LED row drivers
ST LED array drivers fully integrate all functions required to drive high-brightness LEDs. These devices allow constant-current LED row drivers are essentially boost regulators that provide the necessary high voltages to drive multiple LEDs in series,
control in a single-chip solution. The external parts are reduced to only one resistor that sets the preferred maximum current guaranteeing accurate LED current matching.
for all outputs. Devices also come with additional features such as high current, high precision, local and global LED brightness ST offers both single- and multi-channel high-efficiency boost LED drivers featuring a wide dimming range, low noise, and
adjustment, thermal shutdown, error detection, and auto power-saving functionalities. small footprint. They also embed protection functions such as overvoltage and overcurrent protection, thermal shutdown, and
LED-array protection.
Global dimming
LED7706 • 30 mA/row
24 LED2472G STP24DP05
STLA02*
LED1642GW STP16CPC26 STP16C*/D* • 20 mA/row
16 LED7706/7
STP16C*/D* 1 row STLD40D
• 0.5 A/1.5 A/
12 LED1202 STCS*
2 A/row
LED8102S
8 LED row driver controllers
STP08 • 85 mA/row VIN
16 rows LED7708
4 STP4CMP STP04 • Grouped or independent
row dimming
20 30 40 72 80 90 100 400 mA/channel
24 channel RGB (8x3) drivers 12/16 channel drivers 4/8 channel drivers 16 Digit, 56 LED Matrix
• Current gain control • Current gain control • Constant current • 40 mA Current capability LED7708
(LED2472G), constant (LED1642GW), constant • Direct I/O (LED8102S) • 6 Key-scanning
current (STP24DP05) current (STP16C*/D*) (8 x 2 matrix)
• Error detection (STP08)
• Error detection • Error detection • 3-wire serial bus interface
• Global dimming
• Autopower saving (STP16C*/D*)
(LED2472G) • Dot correction (LED1202)
• Autopower saving
5x24 matrix drivers • Local dimming
(LED1642GW, LED1202),
• 20 mA/dot global dimming
• Adjustable luminance for (STP16C*/D*)
each LED (dot)
MAIN APPLICATIONS
MAIN APPLICATIONS
Traffic signals Large panel signs Home appliances Special lighting Smartphones /
LED8102S, LED2472G, LED1642GW, LED2472G, LED8102S, STP16, STP04, LED1642GW, Wearable
STP24DP05, STP04 STP24DP05, STP16, STP08, LED1642GW, LED2472G, LED8102S STLED524, LED1202 Smartphones Keyboard and accessories Home appliances and ATMs
STP08 STP4CMP, STLED524 STLA02, STLD40D STLA02* LED7706, LED7707, LED7708, STCS*
www.st.com/led www.st.com/led
Note: * is used as a wildcard character for related part number Note: * is used as a wildcard character for related part number
90 91
LED bypass protection LINEAR VOLTAGE REGULATORS
The LBP01 series of LED bypass protection devices are bypass switches that can be connected in parallel with 1 or 2 LEDs. ST offers a complete portfolio of industry-standard high-performance regulators for both positive and negative outputs.
In the event of a LED failure, this device shunts the current through other LEDs. It also provides overvoltage protection against Among our products, you can find the optimal combination of ultralow dropout voltage (from 50 to 220 mV for 100 mA to 3 A
surges as defined in IEC 61000-4-2 and IEC 61000-4-5 load current) and low quiescent current - for the highest efficiency design – (from 0.3 to 20 μA for 50 mA to 2 A) or dynamic
performance for the best transient response, power supply ripple rejection (up to 92 dB at 1 kHz), and low noise (as low as
6.3 μVrms). This is coupled with a range of the smallest form factor packages for size-conscious applications, such as a 0.47 x
0.47 mm STSTAMP package.
MAIN APPLICATIONS
Tablets, smartphones, and wearables Healthcare Home appliances Automotive ADAS, ECU
MAIN APPLICATIONS
LD39115, LD39130, LD39020/30, STLQ015, STLQ020, LDK220/320, LDK130, LD39100,
ST1L08, LDBL20, LD59015, ST715, LD39130 LDF, LDFM, LD59150, LDO40L,
LDLN025/30 /50, STLQ020, LDL212, ST730/2 L5050, L5150,
LD56030, LD56050, LD56100, L99VR01, L4949,
Display panels Residential, commercial, architectural and street lighting Emergency lighting Traffic signals LD57100, L99VR01 L4995, L5300
www.st.com/lbp01 www.st.com/linear-regulators
92 93
METERING ICs PHOTOVOLTAIC ICs
STPM32, STPM33, and STPM34 are high accuracy AFE (Analog Front End) for DC and AC energy measurement, offering high
accuracy down to extremely low current typical of home appliances in standby. A full set of on-board features provides high DC-DC converters with embedded MPPT algorithm
system integration and enables on-chip power quality monitoring, reducing smart-meter cost of ownership, and contributing to The maximum power point tracking (MPPT) algorithm maximizes the power output by photovoltaic panels according to
a fast and easy design to dramatically reduce manufacturing time and cost. temperature and solar irradiation conditions.
The SPV1040 is a monolithic DC-DC synchronous boost converter able to harvest the energy generated by even a single solar
STPM34: 4 indipendent channels block diagram
cell characterized by a very low output voltage. It is especially designed to work in outdoor environments with loads up to
about 3 W.
Voltage sensor 1 24-bit ∑∆ ADC The SPV1050 is an ultra-low-power battery charger and energy harvester (from photovoltaic cells or thermo-electric
generators) that guarantees a very fast charge of supercapacitors and any type of battery, including thin-film solid-state
Current sensor 1 24-bit ∑∆ ADC batteries. It is specifically designed to work in indoor environments or with very small thermal gradients with loads up to about
Digital SPI/UART 350 mW.
Voltage sensor 2 24-bit ∑∆ ADC Filters signal MCU
processing Input Power Harvesting Target Other
Capability Source Battery Topology Features
Current sensor 2 24-bit ∑∆ ADC
Current (mA)
Power (mW)
Power (mW)
Voltage (V)
9.0 12.0 40
STPMS2 7.5 10.0
0.40
30
The STPMS2, also called smart-sensor, is a dual SD modulator with embedded PGA. In combination with a microcontroller that 6.0 8.0 0.20
embeds DFSDM filters, it allows you to position the A/D conversion (STPMS2) very close to the current transducers, therefore 4.5 6.0 20
minimizing noise capture from the analog tracks. Once converted, the SD streaming of voltage and current are multiplexed and 3.0 4.0 10 0.10
transferred through a single-wire data line to the MCU. 1.5 2.0
0.0 0.0 0 0.00
STPMS2 0.0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35
Voltage (V) Current (A)
KEY FEATURES 2nd order ∑∆ mod. DAT
VIP DATN
• Two 2nd order SD modulators IEC 62053-23, ANSI C12.1-2001, VIN
ANSI C12.10-1997, Digital MS3
• 0.1% active energy max. error MS2
over 1:2500 dynamic range ANSI C12.20-2002 LNA front end MS1
CIP
• Fast digital calibration CIN 2x, 8x MSO
• Standards supported: 2nd order ∑∆ mod. CLK
EN 50470-1, EN 50470-3, • Allows the use of multiple VCC LDR Bias ref.
IEC 62053-21, IEC 62053-22, shunts MAIN APPLICATIONS
VSS VDDA VDDac VDDav VBG
MAIN APPLICATIONS Smartphones, digital cameras, and camcorders Fitness, climate, home and factory automation monitoring
SPV1040 SPV1050
Energy metering EV charging Lighting Smart plug Servers power monitor Solar charging www.st.com/photovoltaic-ics
www.st.com/mppt-dcdc-converters
Note: * A CC-CV battery charger is needed to apply lithium batteries charging profile
94 95
POWER MOSFETs M9 series M5 series M6 series
MAIN APPLICATIONS
www.st.com/mosfet
Note: * is used as a wildcard character for related part number
96 97
SiC MOSFETs Low-voltage power MOSFETs
Based on the advanced and innovative properties of wide-bandgap materials, ST silicon carbide (SiC) MOSFETs feature ST LV Power MOSFET portfolio offers a broad range of breakdown voltages from -100 V to 100 V, with low gate charge and
very low RDS(on) per area for the 650 V/1200 V Gen2 and the new Gen3 product families, combined with excellent switching low on-resistance, combined with state-of-the art packaging.
performance, translating into more efficient and compact designs. ST STripFET low-voltage MOSFETs support a wide voltage range for synchronous rectification, UPS, motor control, SMPS,
ST is among the first companies to produce high-voltage SiC MOSFETs. These new families feature the industry’s highest power-over-Ethernet (PoE), inverter, automotive, and other applications in a wide range of miniature and high-power packages:
temperature rating of 200 °C for improved thermal design of power electronics systems. DPAK, D2PAK, SOT-223, TO-220, TO-220FP, TO-247, PowerFLAT (5 x 6)/(3.3 x 3.3)/(2 x 2), SO-8 and SOT23-6L.
Compared to silicon MOSFETs, SiC MOSFETs also feature significantly reduced switching losses and minimal variation with
the temperature. These features render the device perfectly suitable for high-efficiency and high-power-density applications. RDSon(mΩ)
HU3PAK H2PAK-7
MAIN APPLICATIONS
MAIN APPLICATIONS
Small motor control and HDD, power tools, STB, Server/Telecoms UPS, e-bikes, Solar inverters,
Motor drive & HEVs / EVs Charging station UPS & Data center Solar inverters USB battery chargers and game consoles and SMPS and fans forklifts, and EHVs
factory automation (Traction Inverter, OBC, DC/DC) Power supply F6 H6 F7 F6, F7 F7
www.st.com/sicmos www.st.com/mosfet
Note: * is used as a wildcard character for related part number Note: * is used as a wildcard character for related part number
98 99
POWER MODULE – ACEPACK PACKAGES OPTIONS POWER OVER ETHERNET ICs
ST ACEPACK power modules come with several topologies that address industrial applications such as motor drives, solar Power over Ethernet (PoE) is a widely adopted technology used to transfer both data and electrical power over an RJ-45 cable.
inverters, charging stations, UPS, welding tools, and power converter solutions, while they are also suitable for electric vehicle ST offers solutions for PoE applications on the powered devices (PD) side that integrate a standard Power over Ethernet (PoE)
power applications like on-board chargers (OBC), electric traction drives, and power converter solutions. interface and a current mode PWM controller to simplify the design of the power supply sections of all powered devices. ST
These highly reliable and compact power modules feature an embedded NTC thermistor and offer the best compromise PoE-PD ICs are compliant with the more recent IEEE 802.3bt specification.
between conduction and switching losses, maximizing the efficiency of any converter system in hard-switching circuitries
for an application range from few kW to hundreds of kW. For flexible and stable mounting, PressFIT and additional soldered Ethernet Swtich
pin options are provided. These power modules implement power semiconductor switches based on ST state-of-the-art SiC PoE - PSE
MOSFET and IGBT technologies.
ACEPACK 1 ACEPACK 2
Up to 15 kW Up to 30 kW KEY FEATURES CONFIGURATIONS PoE-PD
• Very low Stray inductance • CIB (Powered device)
VoIP phone Wireless LAN LED lighting Network
• 2.5 KVrms electrical isolation • Six-pack
access point camera
• Pin out flexibility • Three level t-type
• Custom configurations • Four Pack PoE-PD devices
• Optimized thermal behavior • Half Brige
• Different DBC Options • Boost PM8803 PM8800A
(Al2O3–AlN) • Customized configurations
• Press-fit and solder pin options • IEEE 802.3at PD interface • IEEE 802.3af PD interface
• PWM current mode controller with double • PWM current mode controller
gate driver • Integrated 100 V, 0.5 W, 800 mA
ACEPACK DRIVE • Integrated 100 V, 0.45 W, 1 A hot-swap MOSFET
120 kW to 300 kW hot-swap MOSFET • Supports both isolated and
KEY FEATURES CONFIGURATIONS
• Supports flyback, forward active non-isolated topologies
• AMB substrate for enhanced • Six-pack
clamp, and flyback with synchronous
thermal dissipation rectification topologies
• 3 different bus bar
configuration options
• Extremely low energies
dissipation PM8804 PM8805
• Direct Cooled Cu Base Plate • PWM current mode controller • IEEE 802.3bt PoE-PD interface
with pin fins • Double Gate Driver • System in Package
• Support Isolated Active Forward • Dual Active bridges
Converter • HotSwap MOSFET
ACEPACK DMT32
120 kW to 300 kW • Input voltage up to 75 VDC • Compact package (10 times smaller than discrete BOM) with high thermal
KEY FEATURES CONFIGURATIONS
• Embedded start-up (20 mA) performances
• Designed for automotive • Six-pack
• Slope compensation • 100 W capability
applications • Four Pack
• Programmable fixed frequency
• Different DBC Options • Customized configurations (up to 1 MHz)
(Al2O3–AlN)
• 2.5 kV insulation voltage Main standards
• 1200 V SiC MOSFET, Rectifiers PM8800A PM8803 PM8805+PM8804
• Several configurations PoE-PD PoE-PD PoE-PD
• Integrated NTC temperature (IEEE 802.3af) (IEEE 802.3at) (IEEE 802.3bt)
sensor Power at
13 W 25 W 71 W PoE-PD input
PEP01-5841
100 101
PROTECTION DEVICES ESD protection
Driven by market needs, ST ESD protection devices Line capacitance
TVS are available as single line devices for flexibility
The TVS Transient Voltage Suppressor is an avalanche diode designed to clamp over-voltages and and multi-line arrays for integration in compact Power Rail ESD Protection
applications. All these devices are rated according ESD Multi purpose
dissipate high transient energy. TVS are power devices to protect applications against Electrical Over-Stress >= 3 pF
(EOS), specifically against surge events as defined by IEC 61000-4-5. to IEC 61000-4-2 and specific requirements, such as
low capacitance and bandwith for high speed lines. ESD for Low Speed interface
A large choice of package is available to meet application requirements. < 3 pF
A large choice of packages is available to meet
application requirements. ESD for High Speed interface
Package Stand-off voltage (VRM)
1V 100 V
D2PAK 10.2 x 15.4 LDP01Y
Power delivery Protections Peak pulse current performance
R6 8.85 x 8.85 BZW50 Ultimate TVS protection for USB A IPP 8/20 µs versus VRM
fast-charging ports 140
DO-201 9.5 x 5.3 1.5KE STIEC
120
SMC 5.9 x 8.0 SM15T(Y) SM30T(Y) SM50T(Y)
SMCJ SMC30J SMC50J ESDAxxP 100
80
SMB 3.6 x 5.4 SM6T(Y) Strong and thin protection, the
SMBJ 60
ESDAxxP series helps to stop
D0-15 6.4 x 3.2 BZW04 BZW06 damages due to the surge events 40
P6KE 20
SMA 2.6 x 5.2 SMAJ SMA6J 10/1000 µs 0
KEY FEATURES & 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 V
200 W 400 W 600 W 1.5 kW 3 kW 5 kW Power BENEFITS ST Competition
2.0 x 2.0 ESDA22P150 • Complete voltage range: Type STM32 Pins 5 V - 15 W 9 - 27 W 15 - 45 W 20 V - 100 W
ESDA24P140 5 to 22 V
QFN
MAIN APPLICATIONS
102 103
STDRIVE AND STGAP GATE DRIVERS
ST power MOSFETs and IGBTs gate drivers include integrated high-voltage half-bridge, single and multiple low-voltage gate
drivers. Robustness and reliability, system integration and flexibility. The STGAP series of isolated gate drivers provides galvanic
isolation between the input section, which connects to the control part of the system and the MOSFET or IGBT being driven.
Transmitter Receiver
LV IC HV IC
STGAP2HS - 6 kV isolation
STGAP2S
L6389E L6390 STDRIVE601 TD350E
(3-Phase HV) STGAP2D
L6388E L6392 L6491 TD352 STGAP2HS
A/L6387E L6391 L6494 TD351 STGAP2SiCSN
Features
Features
Features
L6386E/AD L6393 L6498 PM8851 STGAP2SiCS
L6385E L6395 PM8841 STGAP2HD
L6384E L6398 PM8834 STGAP2SiCD
L6399 STGAP1BS
600 V gate drivers Low side gate drivers Galvanically-isolated single and dual
Half bridge gate drivers
• 2 level turn-off (TD35*)
• 4 A source/sink driver high • Up to 6 kV isolation (STGAP2HS)
• Miller clamp (TD35*)
current capability (L6491)
• Pulse transf / opto input (TD35*) • High voltage rail up to 1.7 kV
• Integrated bootstrap diode
• Dual independent low side driver • Up to 5 A source/sink driver current
• Adjustable deadtime (L6494L) capability
(PM8834)
• Comparator, op amp integrated, • 2 Level turn-off (STGAP1B)
• 4 A source/sink driver high current
smart SD, interlocking and
capability (PM8834) • Miller clamp, negative gate supply
program. DT (L6390)
• Optimized for SiC MOSFET driving
• Extended temperature range (A
(STGAP2SiCS)
version)
STDRIVEG600 - High voltage half-
3-Phase
bridge gate driver for GaN transistors
• Best In Class for propagation
delay 85 ns • dV/dt immunity ±200 V/ns
• 200 mA/350 mA sink / source • Driver current capability:
driver current capability • 1.3/2.4 A source/sink typ @ 25 °C, 6 V
• Integrated bootstrap diode • 5.5/6 A source/sink typ @ 25 °C, 15 V
• Separated turn on and turn off gate
driver pins
• 45 ns propagation delay with tight
matching
MAIN APPLICATIONS
• 3.3 V, 5 V TTL/CMOS inputs with
hysteresis
• Interlocking function
• UVLO on low-side and high-side
Factory Home Motor Lighting Solar HEV / EV sections
automation appliances control inverters
www.st.com/stdrive
104
THYRISTORS 1200 V High Temperature SCRs are now available in Surface Mount packages with top-cooled capability. In discrete package
with HU3PAK or in module integration with ACEPACK SMIT package, these products are suitable in all bridge or bridgeless AC/
Available in through-hole and surface-mount packages, ST high-temperature Silicon Controlled Rectifiers DC converter topologies, where compactness and thermal performances are optimized. Thanks to 150 °C maximum junction
SCR provide designers with more headroom for heatsink reduction or more compactness. In addition, the temperature, the 1200 V High Temperature SCRs are suitable for industrial and automotive applications in harsh environments.
voltage surge immunity is fully specified at 150 °C, ensuring designs are precise and secure. These 12 - 80 A
SCRs are ideal for use in charging stations, solid-state relays, inrush current limiters, motor starters, SMPS,
UPS, and renewable-energy junction boxes. The 1200 V automotive-grade thyristor makes AC/DC converters
safe by limiting the inrush current and providing insulation against AC line over-voltages.
Insolating foil
PCB
PCB
High Temperature SCR
TN1605H-6 TN2010H-6 Optimized for Industrial, Building and Residential appliances and based on ST new high temperature technology, our 800 V
TN1205H-6 TN3015H-6 TN4015H-6 TN5015H-6 8H Triacs can work at 150 °C without compromise. Enabling designers to maximize current density or reduce the heatsink size
12 A, 600 V TN1610H-6 TN2015H-6 30 A, 600 V 40 A, 600 V 50 A, 600 V
12 A, 600 V 20 A, 600 V by up to 50%, these triacs are the right choice to run in very hot, confined environments and improve the reliability of systems
such as light control, compact heaters, starters or solid-state relays.
Package
(dI/dt)c
TO-220AB Ins.
IT (RMS) VDRM/VRRM IGT ITSM dV/dt V/µs
TO-220AB
Part number Tj °C max A/ms @ 10 V/µs,
12 16 20 30 40 50 60 80 SCR ITRMS (A) A max V max mA max A max @ 150 °C min
D2PAK
@ 150 °C min
T835H-8 T I G 8 80 8
D2PAK TO-220AB TO-220FPAB TO-220AB Ins. TO-247 D3PAK TO-247LL TOP3I T1235H-8 T I G 12 120 12
T2035H-8 T G 20 200 20
T3035H-8 T I G 30 270 25
AC/DC Conversion SMPS & PSU UPS EV on-board charger Motor Control Home appliances Air conditioning Lighting Heating
106 107
USB TYPE-C® AND POWER DELIVERY CONTROLLERS STM32 USB PD3.0 controllers
With an extensive technology and IPs portfolio, ST provide a range of USB-IF certified solutions for USB Introduced in December 2017, STM32G0 is the world’s 1st standard USB PD 3.0 microcontroller with a UCPD interface (UCPD
Type-C and Power Delivery to support implementations in a variety of sink, source, and dual role devices. stands for USB Type-C and Power Delivery).
From USB Type-C interfaces and PD Controllers to Authentication, ST complements the portfolio with This new IP, available in STM32G0/G4/L5 series, allows development of USB-C sink, source and dual role devices in a wide
Power Management ICs, full range of protection for data, and power line protection. ST solutions range range of embedded applications.
from Type-C port interface ICs to USB PD controllers and offer wide flexibility with hard wired and MCUs UCPD-enabled STM32G0/G4/L5 provides a high flexibility to migrate embedded applications to USB-C and Power Delivery
to fit different use cases and all power ratings. technology, while managing other application environments thanks to the versatile feature set and peripherals available in a
traditional MCU. UCPD is certified PD3.0 and supports all new features such as C-Authentication and Programming Power Supply
Standalone solutions (PPS).
STUSB controllers cover power path applications with optimized partitioning from USB Type-C® Interface for 15 W device https://www.st.com/content/st_com/en/stm32-usb-c.html
to Power Delivery PHY and BMC Driver IC companion chip of STM32-based solutions to standalone full hardware USB PD
STM32G081 block diagram
controller optimized for AC adapters up to 100 W.
Arm® Cortex®-M0+ CPU Encryption
MCU-based solutions Up to 64 MHz AES (256-bit)
Our STM32 solutions help you manage the complexity of implementing USB Type-C® and Power Delivery technology to ensure Nested vector interrupt
that your embedded application supports the latest use cases. The ST ecosystem for USB Type-C reduces the acquisition cost Controller (NVIC) True RNG
of a technology that requires multiple areas of expertise, such as connectivity, power management, data communication, and System
Power supply SW debug Connectivity
authentication.
USB-C USB-C
Combining middleware, configuration, and debugging tools, as well as hardware development platforms, our MCU-based POR/PDR/PVD/BOR Memory Protection Unit 2x SPI (I2S) port 1 port 2
solutions are specifically designed to address this challenge and offer high flexibility to implement USB Type-C and Power Xtal oscillator 4x USART
Delivery (PD). 32 kHz + 1 to 64 MHz AHB-Lite bus matrix (2x with LIN, smartcard,
A companion Type-C Port Protection device TCPP01-M12 is proposed for advanced protection of the USB-C connector line in IrDA, modem control)
Internal RC oscillators APB bus
sink applications, such as CC and Vbus line. For source applications like power adapters, TCPP02-M18 is recommended (mass- 32 kHz (±5%) 1x LPUART
production Q4-2020). For Dual Role Port applications (DRP), TCPP03-M20 is recommended (mass-production Q4-2020). + 16 MHz (±1%) Up to 128-Kbyte
Flash memory 2x I2C
PLL + Prescaler (SMBus, PMBus, UCPD is a new interface that supports:
Up to 36-Kbyte SRAM Fast Mode Plus)
Clock control • USB Type-C connector management
MCU Solutions Overview & Partitioning 20-byte backup registers USB Power Delivery
RTC/AWU (incl. BMC + PHY) • USB Power Delivery 3.0 communication
protocol including C-authentication and
Systick timer Boot ROM
Programming Power Supply
USB-C legacy USB-C + PD3.0 Control
2x watchdogs 7-channel DMA
Sink/Source, 5V-15W Sink/Source/DRP , 5V/20V - 100W (independent and window) 1x 32-bit timer
Attachment + Protection Attachment + Protection + Power negotiation + Alternate Modes + PPS + C-Auth Analog
60 I/Os on 64 pins 1x 16-bit Motor C. timer
1 Entry Level Solution 2 Certified UCPD STM32 3 Port Manager with X-CUBE-USB-PD
Cyclic redundancy check
Temp. sensor fMAX = 128 MHz
4 PWM + 3 compl.
STM8 or STM32 STM32 UCPD MCUs Any STM32 (CRC) 1x 12-bit ADC SAR
• Application tasks • Application tasks • Application tasks 16-channels/2.5 MSPS 5x 16-bit timers
• CC logic
STM8/STM32
• Policy Manager
STM32
• X-CUBE-USB-PD Any STM32 2 PWM each
• Policy Engine
• Protocol Layer
MCU with UCPD (Port Manager)
1x 12-bit DAC 2ch one with fMAX = 128 MHz
UCPD
GPIOs
(ADC) • CC logic / USB PD PHY
CC
lines
I²C
2x comparators 2x Low-power timers
TCPP01-M12 TCPP01-M12 3rd party TCPC
port protection port protection port controller
• Dead Battery • Dead Battery • CC logic / USB PD PHY STM32G0 USB-C Ecosystem: for short time-to-market
• ESD / HV protection • ESD / HV protection • Dead Battery
• Gate Driver • Gate Driver • Gate Driver Our STM32G071B-DISCO kit enables discovery and display of USB-C power and feature capabilities of any USB-C complaint host.
Associated with our professional-grade STM32CubeMonitor-UCPD software GUI, the kit acts as a USB PD analyzer and allows
customers to debug, configure, and inject USB PD3.0 packets in a single click while monitoring Vbus voltage and Ibus current
USB Type-C USB Type-C USB Type-C between two USB-C devices.
Our well-known STM32 configurator STM32CubeMx supports easy setting of UCPD.
An STM32G081B-eval evaluation board is proposed with two USB-C ports offering 45 W of power with different profiles.
NUCLEO-G071RB
STM32G081B-EVAL
STM32G071B-DISCO
108 109
Type-C Port Protection STUSB family of standalone (auto-run) USB-C and Power Delivery controllers
TCPP01-M12 Being designed with ST 20 V process technology, the STUSB family is natively compliant with USB PD electrical requirements.
STUSB controller ICs are certified and integrate the mandatory protection and application features for autonomous port
The TCPP01-M12 (type-C port protection) is a single chip solution for USB type-C port KEY FEATURES management, without the need for external circuitry. STUSB controllers are optimized for power path applications ranging from
protection that facilitates the migration from USB legacy connectors type-A or type-B • ESD protection for CC1, 15 to 100 W, on both SINK and SOURCE sides. Being hardwired, STUSB controllers are fast and predictive to guarantee safety
to USB type-C connectors. The TCPP01-M12 features 22 V tolerant ESD protection as CC2 and VBUS and interoperability, while increasing port robustness and minimizing power consumption. Implementation is fast and easy and
per IEC61000-4-2 Level 4 on USB type-C connector communication channel (CC) and requires no deep knowledge of the USB PD standard or advanced software skills. Standalone controllers are powered from
• Compliant with IEC 61000-
VBUS lines. To allow fast certification for USB Power Delivery, the TCPP01-M12 provides VBUS to minimize BOM cost and can fully operate without external MCU support. For more flexibility, an MCU can optionally
4-2 Level 4 (± 8 kV contact
overvoltage protection on CC1 and CC2 pins when these pins are subjected to short- change main power parameters or read port status with a light software layer.
discharge, ±15 kV air
circuits with the VBUS pin, which may occur when removing the USB Type-C cable from
its receptacle. For sink applications, TCPP01-M12 triggers an externally programmable
discharge)
STUSB controllers:
N-MOSFET overvoltage protection on VBUS pin when a defective power source applies • Over Voltage Protection on DUAL Main common functions
CC lines against short-to- SOURCE SINK
a voltage higher than selected OVP threshold. Also, the TCPP01-M12 integrates a “dead ROLE
battery” management logic that is compliant with the USB Power Delivery specification. VBUS overvoltage • Manage the type-C port
The VBUS N-MOSFET load driver can also be used in source applications. connection
• Externally programmable MCU + MCU +
Over Voltage Protection on USB-PD • Enable the power path (VBUS)
STUSB1602 STUSB1602
Power Battery VBUS line 5 V to 20 V + extra features MCU + • Negotiate power capabilitites
VBUS
Management (3.3 V - 22 V) • Integrated VBUS gate driver STUSB4700 STUSB1602 • Interact with the power
for external N-MOSFET STUSB4710 STUSB4500 management unit
USB-PD
VBUS GATE SOURCE • Over Temperature 5 V to 20 V STUSB4761 • Monitor the power path
Protection • Protect the port and manage
VBUS_CTRL • Integrated “Dead Battery” re-start on fault
USB-C STUSB1700 STUSB1600 STUSB4500L
USB-C VCC GPIO1 ADC VCC management 5V • Report majors events to the
connector TCPP01-M12 • Open-drain fault reporting MCU (optional)
FLT GPIO2
DB/ GPIO3 Application • Operating junction
CC CC1C CC1 CC1C STM32-UCPD temperature from STUSB47xx STUSB1602 STUSB4500
CC CC2C CC2 CC2C -40 °C to 85 °C
• ECOPACK®2 compliant • USB PD SOURCE • USB PD SOURCE/SINK/DUAL ROLE • USB PD SINK
GND GND • Up to 5 programmable PDOs • Perfect MCU companion chip • Dead Battery support
GND
• Full hardware solution - no software ensuring port protection, power path • VBUS powered (ZERO power on
monitoring and management, role VBAT)
TCPP03-M20 • Internal and/or external VBUS
advertisement and detection, PD PHY
• discharge path • Input Over Voltage protection
DRD or DRP applications require careful protection implementation both on the sink power path and the source power path to communication
• Very low power consumption • QFN and CSP package available
safely comply with the USB-C Power Delivery specification. TCPP03-M20 is an MCU companion chip enabling cost-effective • Ready-to-use software frameworks
USB-C Power Delivery DRD/DRP implementation. It provides protections and functionalities to safely comply with the USB-C • E-marked cable identification for fast prototyping of most common • SOURCE power profile reporting
Power Delivery specification. (for >3 A support) application scenario such as: basic • STSW-STUSB002: GUI
The device drives external N-MOSFETs on VBUS connector pin in the source and sink power path for over-voltage and over- • Over-temperature protection source, sink, DRP, dual port, but • STSW-STUSB003: optional open
current protection. It provides an analog current sense output accessible for an MCU ADC, thus minimizing system cost. also more complex use cases, which source software drivers for dynamic
include optional features of PD3.0, power Management
TCPP03-M20 helps minimize power consumption during DRP toggling states thanks to its three programmable power modes, STUSB1700 vendor defined, battery or extended
allowing a power consumption as low as 3 µA maximum up to 125 °C, also thanks to enable pin that wakes up the MCU. • Mini-dongle: EVAL-SCS001V1
messages.
• USB-C 5V SOURCE
• MCU supported:
• High Voltage protections STUSB4500L
• STSW-STUSB010: STM32F072
KEY FEATURES • GPIO-controlled current profile
• STSW-STUSB012: STM32F446 • USB-C 5V SINK
• Externally programmable VBUS OVP (over voltage protection) and OCP (over current (Power sharing, Thermal protection)
protection) for provider and consumer power paths with fast turn-off • STSW-STUSB014: STM32G474 • Dead battery support
• VBUS powered (no LDO needed)
• Two integrated N-MOSFETs gate drivers for VBUS OVP and OCP • STSW-STUSB015: STM32L4R5 • VBUS powered (ZERO power on
• AEC-Q100 available
• Very low power in “unattached” state during DRP toggling: 3 μA max. at 125 °C VBAT)
• Compliant with PPS (programmable power supply) for fast charging, up to 100 W STUSB1600 • Input Over Voltage protection
• Integrated discharge on VBUS and VCONN • SOURCE power budget reporting
• USB-C 5V SOURCE/SINK/DUAL
• Current sense on VBUS with analog output • QFN and CSP package available
ROLE
• ESD protection for CC1, CC2, compliant with IEC 61000-4-2 Level 4 (±8 kV contact • Mini-dongle: EVAL-SCS002V1
• High Voltage protections
discharge, ±15 kV air discharge) • Integrated VBUS discharge
• VCONN OCP and OVP • Dead battery support
• Over voltage protection on CC lines against short-to-VBUS • Optional interface to MCU (I2C + IRQ)
• Over temperature protection (150 °C typ.)
www.st.com/usb-type-C
110 111
For more information on ST products and solutions, visit www.st.com
© STMicroelectronics - November 2022 - Printed in the United Kingdom - All rights reserved
ST and the ST logo are registered and/or unregistered trademarks of STMicroelectronics International NV or
its affiliates in the EU and/or elsewhere. In particular, ST and the ST logo are Registered in the US Patent and
Trademark Office. For additional information about ST trademarks, please refer to www.st.com/trademarks.
Order code: BR2211PMGUIDE All other product or service names are the property of their respective owners.