Professional Documents
Culture Documents
Gengear Series SPL-A Up To 320
Gengear Series SPL-A Up To 320
Engen Gencirc
SPL A-Series
Synthetic Circulating Oils
Corrosion High
Multipurpose
Protection Temperature
Description Application
Gencirc SPL A-Series oils are premium quality lubricants based Gencirc SPL A-Series lubricants are recommended for use
on Polyalphaolefin synthetic hydrocarbon technology. It is in bearings and industrial gears where operating or bulk
fortified with a unique additive package that provides excellent oil temperatures are such that conventional lubricants give
high temperature oxidation and thermal stability, very high unsatisfactory service life and/or result in high maintenance
viscosity index, low pour points, high load carrying ability as well costs for frequent system cleaning and lubricant changes. These
as outstanding anti-wear properties and good rust and corrosion lubricants can be used for plain or rolling element bearings
protection. and for enclosed gear sets which are suitable for application
by bath, splash or circulation systems. These oils are generally
compatible with conventional mineral oils and seal materials
used in equipment normally lubricated with conventional mineral
Benefits & Features oils. Extended service intervals and potential power savings are
available over the entire temperature range of application of – 30
• Excellent thermal and oxidation stability at high ºC to 180 ºC. Specific applications include circulating oil for:
temperatures. • Paper machines
• Wide operating temperature range. • Paper machine drier bearings
• Excellent wear protection. • Calendar stacks
• Reduced energy demands. • Winders
• Long service life. • Large anti-friction and journal bearings
• Reduced maintenance costs
Gencirc SPL A-32 is also suitable for use in,
• Oil flooded rotary screw compressors
• Liquid ring vacuum pumps
• Hydrocarbon process gas compressors
Performance Level • Gas turbine applications
Meets or exceeds the f ollowing Industry Standards:
They are not intended for use in heavily loaded applications or
• Cincinnati Machine P-34, P-35, P-59, P-74, P-78, P-80
those requiring extreme pressure (EP) additives. See also Gengear
• DIN 51517 – Part 3 (CLP Oils)
SPL A-Series lubricants for extreme pressure gear applications.
Typical Physical Characteristics
Pour Point, (typical) ASTM D5950 °C -68 -51 -48 -37 -37
Density @ 20°C ASTM D4052 g/cm3 0.835 0.835 0.845 0.875 0.878
06.2021
Foam Test, Seq I Tendency/stability ASTM D892 ml/ml 20/0 0/0 0/0 0/0 0/0
All technical data is provided for reference only. These characteristics are typical of current production. Whilst future production will conform to Engen’s specification, variations in these
characteristics may occur.
Safety Data Sheets are available for all our products and should be only be consulted for appropriate information regarding storage,
safe handling and disposal of the product. No responsibility shall be taken by either Engen or its subsidiaries and related holding
corporation for any loss or injury or any direct, indirect, special, exemplary, consequential damages or any damages whatsoever,
whether in action of contract, negligence or other tortuous action, in connection or resulting from abnormal use of the materials
and/or information, from any failure to adhere to recommendations, or from hazards inherent in the nature of the materials and/or
information. All products, services and information supplied are under our standard conditions of sale.
Please consult with any of our local representative in the event you require any further information.
+27 8600 36436
WEBSITE
engen.co.za
For more information about this
product and other products in EMAIL SALES
our range please scan 1call@engenoil.com
the following:
EMAIL TECHNICAL SUPPORT
csctechnical@engenoil.com