Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

FIGURE 3-2.

AUTOMATIC LUBRICATION SYSTEM INSTALLATION

1. L.H. Suspension, Bottom Bearing 13. R.H. Suspension, Top Bearing


2. L.H. Hoist Cylinder, Bottom Bearing 14. R.H. Body Pivot Pin
3. L.H. Anti-Sway Bar Bearing 15. Grease Reservoir
4. L.H. Suspension, Top Bearing 16. Vent Hose
5. L.H. Body Pivot Pin 17. Pipe Plug (Oil Level)
6. L.H. Hoist Cylinder, Top Bearing 18. Pressure Switch, N.O. - 20 685 kPa (3,000 psi)
7. R.H. Hoist Cylinder, Top Bearing 19. Grease Pump
8. Grease Supply From Pump 20. Vent Valve
9. R.H. Suspension, Bottom Bearing 21. Filter
10. R.H. Hoist Cylinder, Bottom Bearing 22. Grease Supply to Injectors
11. Rear Axle Pivot Pin 23. Injectors
12. R.H. Anti-Sway Bar Bearing 24. Pressure Switch, N.O. - 13 790 kPa (2,000 psi)

P3-4 Automatic Lubrication System 1/12 P03030

You might also like