Professional Documents
Culture Documents
Resolve Ix Ps
Resolve Ix Ps
Extreme-performance instrumented
wireline intervention service
Product sheets
Index
PRODUCT SHEETS
Anchor-linear actuator tool ������������������������������������������������������������������ 3
Smart shifting tool �������������������������������������������������������������������������������� 5
Rotary and milling tool ������������������������������������������������������������������������� 7
Active debris removal tool �������������������������������������������������������������������� 9
Temperature: ■ Offers adaptability and customizability to How the anchor and linear
Rated to 350 degF [177 degC] meet project requirements and objectives actuator work
By integrating the anchor and linear actuator
Pressure: Features modules, ReSOLVE iX service reliably applies
Rated to 20,000 psi [138 MPa] ■ Sour-service qualified controlled axial force to well components.
Certification: ■ HPHT rated The linear actuator can be combined with
NACE MR0175 compliant ■ Combinable with the ReSOLVE iX service smart shifting tool;
● WIReD* wireline inline release device
slickline tools; and any third-party shifting,
Real time:
pulling, and interface tools.
Control and verification ● TuffTRAC iX* extreme-performance
Linear actuator displacement: wireline tractor The anchor module opens with the industry’s
1-mm inferred resolution largest expansion, spanning nearly 3 in
How it improves well intervention [7.62 cm] from the tool OD to the tubing. Up
The anchor-linear actuator tool is part of to 50,000 lbf [222,411 N] of anchoring force is
Applications the ReSOLVE iX* extreme-performance precisely applied by the innovative low-stress
■ Anchor instrumented wireline intervention service. anchor grips that minimize impact on the tubing
● Nearly 3 in [7.62 cm] of expansion Whether in HPHT, deviated, restricted-access, and ensure linear force application. Once
for slim completion access or sour well conditions, it provides real-time anchoring is confirmed to surface by ReSOLVE
monitoring, dynamic tool control, and verified iX service’s real-time measurements, the linear
● Minimized tubing impression
downhole actuation to set new standards actuator module can be extended or retracted
while enabling maximized linear for success in well intervention operations.
force application multiple times as necessary to apply a large,
Sensors incorporated into the ReSOLVE iX controlled force of up to 16,000 lbf [71,171 N]
■ Linear actuator service tools enable the engineer to monitor to a specific well component. Continuous
● Opening, closing, locking out, and tool activity and the progress of downhole measurements of displacement and applied
replacing valves operations while responsively controlling the force validate completion of the operation.
● Pulling retrievable plugs
tool for optimal performance. By integrating
● Fishing operations
monitoring and control, ReSOLVE iX service What it replaces
eliminates the reliance on estimates and Conventional winch-operated slickline tools
Benefits assumptions that is typical with conventional do not collect or use downhole measurements
■ Enables high force in wells, even in highly winch-controlled intervention methods such within an in-tool hierarchal control ecosystem.
deviation sections as slickline. Furthermore, its actions are not ReSOLVE iX service’s seamless integration
impacted by deviation or process adherence, of the anchor and linear actuator modules
■ Reduces risk for intervention
as each action is controlled via an intuitive resolves this gap to improve operational
■ Provides access to bottom sections of dashboard that delivers repeatable and efficiency, reduce operational risks, and
hostile-condition wells consistent results. The service also detects remove need of a jar.
■ Controls action to prevent completion unexpected behavior and provides insight into
damage when anchoring by design downhole conditions so you can remediate Furthermore, it’s integration with the
issues using the most effective solution. TuffTRAC iX tractor makes its application
■ Prevents anchor slippage
Conveyance is on wireline by gravity or on possible in deviated sections of the well where
■ Provides insight into downhole conditions downward actions become uncertain or access
tractor in highly deviated and horizontal wells.
to enable taking effective action becomes impossible due to gravity.
Specifications
ReSOLVE iX Anchor-Linear Actuator Tool†
Output Anchor: radial force, radial position, displacement
Linear actuator: axial force, extension and retract measurement
Head tension
Casing collar locator (CCL) and optional gamma ray
Wellbore pressure
Wellbore temperature
Accelerometer for anchor slippage indication
Anchor module Max. opening diameter:‡ 5.2 in [132 mm]
Opening diameter measurement resolution:‡ 0.01 in [ 0.254 mm]
Max. anchoring force:‡, § 50,000 lbf [222,411 N]
Max. closing force:‡, § 25,000 lbf [111,205 N]
Linear actuator module Stroking length: 12 in [305 mm]
Min. linear actuator displacement measurement resolution:††
Indirect measurement: 0.05 in (1.27 mm)
Direct measurement: 0.35 in [8.89 mm]
Max. axial force:†† 16,000 lbf [71,171 N]
Mud type and weight All
Pressure rating 20,000 psi [138 MPa]
Temperature range 32 to 350 degF [0 to 177 degC]
Hole size—min. 2.2 in [55.9 mm]
Outside diameter ‡ 21/8 in [53.97 mm]
Length—min.‡ 35.2 ft [10.73 m]
Weight‡ 307 lbm [139 kg]
Tension 25,000 lbf [111,205 N]
Compression 18,000 lbf [80,068 N]
Special applications NACE MR0175 compliant for H2S and CO2 resistance
Fishing capability: Optional 31/8- or 21/8-in [79.38- or 53.97-mm] WIReD wireline inline release devices above and
below tractors
†
All values are for standard specifications and are subject to change without notice. A dedicated engineering team is available for customizing tools to address your challenges.
‡
Configuration dependent
§
Measured and controlled in real time in the acquisition software
††
Linked to stroking speed
slb.com/ReSOLVE
*Mark of Schlumberger
Other company, product, and service names are the properties of their respective owners.
Copyright © 2020 Schlumberger. All rights reserved. 20-PR-735675
Smart Shifting Tool
ReSOLVE iX extreme-performance instrumented wireline intervention service
Powerful integration of high-expansion anchor, high-force linear actuator, and smart shifting tool
for efficient and effective shifting
Temperature: How it improves well intervention multiple shifts in any direction in a single run,
Rated to 350 degF [177 degC] The ReSOLVE iX* extreme-performance whether to a single component or multiple
instrumented wireline intervention service components in multizone completions.
Pressure:
provides reliable shifting via an anchor,
Rated to 20,000 psi [138 MPa] First, the SST is used to seek the shifting
linear actuator, and smart shifting tool (SST).
Certification: Whether in HPHT, deviated, restricted access, profile by applying low pressure to the shifting
NACE MR0175 compliant or sour well conditions, these instrumented keys, navigating through internal diameter
tools provide real-time monitoring, dynamic changes. This movement can be generated
Real time: by a wireline winch, a wireline tractor, or a
tool control, and verified downhole actuation
Control and verification linear actuator with the tool anchored. The
to set new standards for success in well
Shifting force measurement anchor module opens with the industry’s
intervention operations. Sensors incorporated
Adaptability: in the ReSOLVE iX service tools enable the largest expansion, spanning nearly 3 in [5 cm]
Multiple shifting operations engineer to monitor tool activity and the as standard from the tool OD to the tubing.
in one run progress of downhole operations while Up to 50,000 lbf [222,411 N] of anchoring
responsively controlling the tool for optimal force is precisely applied on surface command
performance. By integrating monitoring and by the innovative low-stress anchor grips
Applications
control, ReSOLVE iX service eliminates reliance that minimize impact on the tubing while
■ Smart shifting
on estimates and assumptions that is typical maximizing traction. Once the shifting profile
● Latching of multiple shifting profiles in is latched and anchoring is confirmed to
any well condition with conventional surface wireline mechanical
tension and electrical power-controlled surface by ReSOLVE iX service’s real-time
● High controllability for multiple shifting
intervention methods. measurements, the linear actuator can be
actions in a single run extended or retracted multiple times as
● Sliding sleeves in multizone completions Reliable latching in any well is made possible necessary to apply the required, controlled
or isolation valves by detecting diameter changes, and shifting force of up to 16,000 lbf [71,171 N] to a specific
is confirmed by measuring shifting force vs. well component. Continuous measurements
● Large expansion ratio for shifting
the shifting displacement valve fingerprint. of displacement and applied force validate
components below restrictions
The service also detects unexpected behavior completion of the operation.
■ High-force, high-expansion anchoring and provides insight into downhole conditions
● Large expansion ratio for anchoring so you can remediate issues using the most In addition to the measurements made by
tubulars below restrictions effective solution. the linear actuator module, the SST provides
the profile key radial force, which is fully
● Minimized tubing impression while
Conveyance is on wireline by gravity or on controllable and adjustable. The SST can
applying maximized traction also be used as a profilometer, providing
tractor in highly deviated and horizontal wells.
■ High-force linear actuation a qualitative profile of the completions
● Bidirectional capability for shifting open
How it works geometry. These measurements provide real-
or close in a single run. By integrating the anchor, linear actuator, time positive confirmation that a device has
and SST modules, ReSOLVE iX service been effectively shifted.
● Highly controllability for shifting to any
reliably applies controlled axial force to well
demanded positions components. Since the SST’s keys can be During conveyance in the well, the tool’s keys
● Instrumentation enabling measurement are fully retracted, remaining closed to keep
closed and opened on command and the
of completion-element shifting fingerprint linear actuator is bidirectional, it can achieve the tool OD at 21/8 in.
● Shifting action diagnosis and
malfunction detection
ReSOLVE iX service integrates the anchor, linear actuator, and smart shifting tool.
Smart Shifting Tool
What it replaces What else I should know The instrumentation that ReSOLVE iX
Conventional shifting tools do not collect or ReSOLVE iX service’s shifting capabilities are service brings to the shifting application
use downhole measurements within an in-tool easily configurable to adapt to all potential enables comparing the behavior of the
hierarchal control ecosystem. ReSOLVE iX downhole conditions. A wide variety of shifting operation to a reference to monitor,
service’s seamless integration of the anchor, keys is available to best fit the profile to be control, and confirm the shifting progress
linear actuator, and SST resolves this gap to shifted. For unique applications, a dedicated and detect any unexpected completion
improve operational efficiency and reduce Schlumberger engineering team can design element malfunction.
operational risks. and qualify customization kits upon request.
System integration testing can also be
performed for particular shifting applications.
Specifications
ReSOLVE iX Service’s Smart Shifting Tool†
Output Head tension
Casing collar locator (CCL) and optional gamma ray
Wellbore pressure
Selective shifting tool: profile key radial force
Wellbore temperature
Accelerometer for anchor slippage indication
Anchor: radial force, radial position, and displacement
Linear actuator: axial force, extension, and retract measurement
Smart shifting tool: profile key radial force and diameter change indication in seek mode
Anchor module‡ Max. opening diameter:‡ 5.2 in [132 mm]
Opening diameter measurement resolution:‡ 0.01 in [0.254 mm]
Max. anchoring force:‡, § 50,000 lbf [222,411 N]
Max. closing force:‡, § 25,000 lbf [111,205 N]
Linear actuator module‡ Stroking length: 12 in [304.8 mm]
Min. linear actuator displacement measurement resolution:§, ††
Indirect measurement: 0.05 in (1.27 mm)
Direct measurement: 0.35 in [8.89 mm]
Smart shifting tool module‡ Max. opening diameter:‡ 5.3 in [134.62 mm]
Max. opening force:‡, § 24,000 lbf [106,757 N]
Mud type and weight All
Pressure rating 20,000 psi [138 MPa]
Temperature range 32 to 350 degF [0 to 177 degC]
Hole size—min. 2.2 in [55.9 mm]
OD‡ 21/8 in [53.97 mm]
Length—min.‡ 42 ft [12.80 m] (anchor, linear actuator, and smart shifting tool combined)
Weight‡ 366 lbm [166 kg] (anchor, linear actuator, and smart shifting tool combined)
Tension 25,000 lbf [111,205 N]
Compression 18,000 lbf [80,068 N]
Special applications NACE MR0175 compliant for H2S and CO2 resistance
Fishing capability: Optional 31/8- or 21/8-in [79.38- or 53.97-mm] WIReD* wireline inline release devices above and
below tractors
†
All values are for standard specifications and are subject to change without notice. A dedicated engineering team is available for customizing tools to address your challenges.
‡
Configuration dependent
§
Measured and controlled in real time in the acquisition software
††
Linked to stroking speed
slb.com/ReSOLVEiX
*Mark of Schlumberger
Other company, product, and service names are the properties of their respective owners.
Copyright © 2020 Schlumberger. All rights reserved. 20-PR-735675
Rotary and Milling Tool
ReSOLVE iX extreme-performance instrumented wireline intervention service
Intelligent tractor-powered rotary and milling tool to eliminate obstructions
Performance of the ReSOLVE iX service rotary and milling tool and TuffTRAC
iX tractor is orchestrated by the MillOptimizer automatic milling system.
MillOptimizer system
Rotary and Milling Tool
experts across the Schlumberger product do occur, an automated backoff sequence What else I should know
lines, can design and qualify a custom milling reduces recovery time. The milling tool’s novel PDC bit is designed and
application upon request. ■ The service quality of prolonged milling manufactured by Lyng Drilling, a Schlumberger
operations is augmented through the company. Optimized for maximum rate of
What it replaces penetration (ROP) when milling hard scale
engineer’s full awareness of tool status.
Conventional winch-operated milling tools buildup, this groundbreaking mill bit achieves
do not collect or use downhole measurements ■ Operational risk is reduced through
the highest rate of scale volume milled within
within an in-tool hierarchal control ecosystem. advanced diagnostics triggering tool
the power limits of electric wireline.
ReSOLVE iX service rotary and milling tool hardware protection actions for tool
seamlessly integrates with the TuffTRAC iX rotation, temperature, and overcurrent, Technical details
tractor and MillOptimizer system to resolve based on real-time data rates that are For more information, read SPE-194232.
this gap. Increased operational efficiency and unachievable manually. The head-voltage
reduced operational risks result as follows: stabilization controller continuously adjusts
■ Faster ROP is achieved by milling at higher
the surface power supply to prevent
voltage spikes to the downhole tool and
bit torques, which are enabled by the
overvoltage occurring, assuring maximum
ability of the automated system to prevent
milling power availability.
bit seizure and motor stall events. If these
Specifications
ReSOLVE iX Service Rotary and Milling Tool†
Output Milling torque, weight on bit, milling bit speed (rpm), relative bearing (tool orientation)
Milling motor temperature
Head tension
Casing collar locator (CCL) and optional gamma ray
Wellbore pressure
Wellbore temperature
Milling tool Milling torque adjusted and managed by the MillOptimizer system in real time using WOB generated by the TuffTRAC iX tractor
Max.: 200 lbf.ft [271 N.m]
Resolution: 0.5 lbf.ft [0.68 N.m]
Milling bit speed adjusted and updatable in real time in acquisition software
Max.: 50 rpm
Resolution: 0.5 rpm
Mud type and weight All
Pressure rating 20,000 psi [138 MPa]
Temperature range 32 to 350 degF [0 to 177 degC]
Hole size—min. 2.2 in [55.9 mm]
Tractoring hole size—max. 10.5 in [266.7 mm]
Outside diameter ‡ 21/8 in [53.97 mm]
Length—min. 7.83 ft [2.38 m]
Weight ‡ 79.11 lbm [35.88 kg]
Tension 25,000 lbf [111,205 N]
Compression 25,000 lbf [111,200 N]
Special applications NACE MR0175 compliant for H2S and CO2 resistance
Custom bits on request
Complete range of standard brushes, hones, and other accessories
Fishing capability: Optional 31/8- or 21/8-in [79.38- or 53.97-mm] WIReD devices above and below tractors
†
All values are for standard specifications and are subject to change without notice. A dedicated engineering team is available for customizing tools to address your challenges.
‡
Values dependent on configuration.
slb.com/ReSOLVE
*Mark of Schlumberger
Other company, product, and service names are the properties of their respective owners.
Copyright © 2020 Schlumberger. All rights reserved. 20-PR-811754
Active Debris Removal Tool
ReSOLVE iX extreme-performance instrumented wireline intervention service
Efficient vacuum removal of wellbore debris
Temperature rating: ■ Reduced risk of getting stuck because Expanding debris removal options
302 degF [150 degC] of the reversible PCP The problems caused by wellbore debris
Debris secured before return to surface are well documented, and many different
Pressure rating: ■
PCP pump module Fine-debris filters Large-debris bailers Check valve nose
A wide range of debris particle sizes from 0.05 mm [0.002 in] to 1.9 cm [0.75 in] can be optimally collected in one run due to the configurability of the multistage bailer
module of ReSOLVE iX service.
Flow
new standards for success in well intervention
operations. Sensors incorporated in the
ReSOLVE iX service tools enable the engineer
to monitor tool activity and the progress of
downhole operations while responsively Comparison of PCP for the
controlling the tool for optimal performance. debris removal application
By integrating monitoring and control of the to the industry standard.
modular PCP, the active debris removal tool Pressure
of ReSOLVE iX service saves trips and time by
knowing exactly when to pull out of hole. It The real-time measurement capability of ReSOLVE iX service during debris removal operations
also eliminates the reliance on estimates and enables operators to detect when the bailers are clogged or full to appropriately adjust the
assumptions that is typical with conventional pumping rate, initiate jetting, or work the toolstring. The result is optimized collection efficiency
turbine-powered debris removal tools. and operational time savings.
A novel approach to wellbore ReSOLVE iX service’s active debris removal capabilities are easily configurable to adapt to all
debris removal potential downhole conditions. The combination of PCP suction power with a wide variety of
The active debris removal tool efficiently bailers and bottom noses ensures a best fit for various downhole debris conditions, from loose
vacuums wellbore debris to enable access for to cohesive debris and settled on any surface.
further intervention or tractor conveyance.
It uses a powerful downhole PCP to generate What it replaces
localized circulation of the wellbore fluid Conventional debris removal tools do not collect or use downhole measurements within an in-tool
for collecting settled and cohesive debris. hierarchal control ecosystem. ReSOLVE iX service’s active debris removal tool resolves this gap to
Bailers remove solids from the flow through improve operational efficiency and reduce operational risks:
a combination of open bailing and filtration. ■ Effective collection is accelerated by allowing the PCP to pump at higher rpm.
A check valve embedded in the bottom nose ■ The service quality of prolonged debris removal operations is augmented through the
traps debris to eliminate the risk of debris loss
engineer’s full awareness of tool status.
as the toolstring is recovered to surface.
■ Operational risk is reduced through advanced diagnostics that trigger tool hardware protection
The bailer system includes a system of filters, actions for temperature, and overcurrent, based on real-time data rates that are unachievable
traps, and valves for capturing and retaining with conventional tools. The head-voltage stabilization controller adjusts the surface power
collected debris, with these elements uniquely supply to prevent voltage spikes to the downhole tool and overvoltage occurring.
packaged to leverage the continuous higher-
pressure pumping capability and increase the What else I should know
volume of recovered debris per run. Viscous ReSOLVE iX service’s cleanout application capabilities are easily configurable to adapt to all
slurries and large solids are captured using a potential downhole conditions. The wide variety of bailers and bottom noses ensures a best fit for
check valve in the lower stage of the bailers, a well’s downhole configuration. For unique application of the active debris removal tool, such as
and fine solids are captured using coaxial for spotting acid and cement plug dispensing, customization is available on request—designed,
filters in the upper stage of the bailers. This qualified, and built by a dedicated engineering team.
staged approach enables the active debris
removal tool to collect a wide variety of debris
in a single run.
Specifications
ReSOLVE iX Service’s Active Debris Removal Tool†
Output Pump rotor torque and speed
Motor temperature
Head tension
Casing collar locator (CCL) and optional gamma ray
Wellbore pressure
Wellbore temperature
Debris size—max.‡ ¾ in [19 mm]
Debris size—min.‡ 1.97 × 10 –3 in [0.05 mm]
Reversible PCP Real-time flow rate control
Max. flow rate: 15.32 galUS/min [58.0 L/min]
Max. achievable differential pressure: 300 psi [2,068 kPa]§
Pump rotor torque measurement resolution: 0.14 lbf.ft [0.19 N.m] and 0.5 rpm
Bailers‡ Max. volume
Large debris collected: 0.09 galUS/ft of bailer [1.12 L/m]
Fine debris collected: 0.07 galUS/ft of bailer [0.87 L/m]
Standard length of bailers: 45 ft [13.7 m] for 4.08-galUS [15.44-L] max. volume collected
Mud type and weight All
Pressure rating 20,000 psi [138 MPa]
Temperature range 32 to 302 degF [0 to 150 degC]††
Hole size—min. 2.2 in [55.9 mm]
Outside diameter ‡ 21/8 in [53.97 mm]
Min. length (15-ft bailer configuration) 27.21 ft [8.29 m]
Weight‡ 204.48 lbm [92.75 kg]
Tension 25,000 lbf [111,200 N]
Compression 25,000 lbf [111,200 N]
Special applications NACE MR0175 compliant for H2S and CO2 resistance
Custom applications on request for bidirectional pump capabilities to clean, high-pressure wash, circulate, and spot
Tractoring conveyance: TuffTRAC iX extreme-performance wireline tractor
Fishing capability: Optional 31/8- or 21/8-in [79.38- or 53.97-mm] WIReD wireline inline release devices above and below tractors
†
All values are for standard specifications and are subject to change without notice. A dedicated engineering team is available for customizing tools to address your challenges.
‡
Values depend on configuration.
§
PCP capabilities depend on circulation flow rate, debris collected, and downhole conditions.
††
For applications between 302 and 351 degF [150 to 177 degC], contact Schlumberger representative.
slb.com/ReSOLVE
*Mark of Schlumberger
Other company, product, and service names are the properties of their respective owners.
Copyright © 2020 Schlumberger. All rights reserved. 20-PR-723828