Professional Documents
Culture Documents
DWX-53DC: Primary Information
DWX-53DC: Primary Information
DWX-53DC: Primary Information
DWX-53DC
Primary Information Ver. 4
Update history
3.0 Nov. 2022 New information:#8, 10, 11, 14, 16-18, 26, 27
4
Concept Background
The Digital
Denture SDGs IoT
Epoch has begun
Value Proposition
Next generation of DWX Popularization of DC
means requires
Weight
120Kg
Recommended
Against load
➢ 500Kg
Exterior Design
➢ Less width and height when the covers are opened compared with 52DCi
➢ Robust frame, reduced variation between manufactured devices
Tablet PC holder
Recommended models:
Microsoft Surface7 , 7+
Surface Go3.
L-shape USB adapter is
needed (Not included in
DWX-53DC).
Highlighted Specifications
➢ New frame, New spindle: 2.5hours for milling a denture
➢ New disc changing mechanism: Faster changing time (half) from 52DCi
➢ B-axis: ±35 degrees
➢ Special adapter: Open edge, waterproof, heat and pressure resistant
enabling polymerization in a pressure pot.
Open edge adapter and ±35
degrees B-axis allow to mill almost
completely the undercuts for the
full-arch or denture anterior part.
Highlighted Specifications
➢ Built-in camera: Value proposition of DGSHAPE CLOUD and online support
➢ New air blowing process with bundled extractor: Reduce zirconia dust up to 99%
Camera location
Dummy pin should be cleaned everyday to prevent dust issue for the spindle
New calibration process
1. Manual calibration : Approx. 2 hours
After auto-calibration, mill a wax test piece.
STEP 1: four-point measure
STEP 2: measure the milled block pieces using a micrometer
Necessary items(Not included in DWX-53DC)
➢ 14mm wax disc
➢ 4mm square endmill (ZRB-200D is compatible)
➢ Micrometer (3mm tip is recommended)
Important!! It is recommended to
operate auto + manual calibration at
every new installation or relocation.
℃ ℃ ℃
Dedicated suction unit bundled
Mandatory to bundle the dedicated Renfert SILENT powerCAM EC with the DWX-53DC
➢ Dedicated synchro-cable will prevent
Every 8 hours, even during overnight unattended milling,
milling to stop during the cleaning
powerCAM EC will automatically clean the filters (with
process of the filters.
vibration for 10 seconds) to prevent the suction power
reduction.
Image of suction
force reduction.
Adapter rack:
Standard adapter: ZR-53DC
ZMA-53DC
Newly designed rack (Not
Newly designed adapter (Not compatible with DWX-52D series).
compatible with DWX-52D series). Supporting disc management and
100 ID patterns, 6 pieces in a box. keeping workspace tidy.
Items MSRP
Items MSRP
Disc adapter
230 EUR
ZMA-53DC
250 USD
(6 pieces)
Open edge adapter
375 EUR
ZMA2-53DC
450 USD
(1 piece)
MSRP
650 USD / 520 EUR
Consumables (DK2-53)
For making denture bases
×5 MSRP ZRB-200D
50USD / 40EUR MSRP
110USD / 95EUR
DK2-53-TR ZPB-100D
ZPB-50D
×5 ×5 ZPB-30D
MSRP MSRP(each)
75USD / 60EUR 85USD / 70EUR
Launching Schedule
News release / Web release
➢ 2022 September 1st
Launching
➢ 2022 September 7th
Let’s SHAPE a new Dimension