Professional Documents
Culture Documents
Installation Instructions Office License Prod - IQ V3.14 - EN
Installation Instructions Office License Prod - IQ V3.14 - EN
V3
©Siempelkamp Maschinen- und Anlagenbau GmbH & Co. KG 2004
Office Licence
Windows 10
Schutzvermerk nach DIN 34 beachten!
Prod-IQ V3.14+
Important!
The instructions in this operating manual must be followed to ensure safe and trouble-free opera-
tion of the system.
Note:
Please make sure that all Prod-IQ®
programs have been closed before
uninstalling!
Attention:
Log off the current user and log on as
• Local Administrator
or
• Domain Administrator
©Siempelkamp Maschinen- und Anlagenbau GmbH & Co. KG 2004
Note:
There might be only 1 (demo) li-
cense file which will be valid for all
of the office installations. Later for
activation a unique license file for
each installation will be delivered.
Note:
In the customer's corporate net-
work, the IP address of the server
will most likely differ from the known
IP address of the process network.
(e. g. connection about second
network card or a NAT-Mapping) …
Therefore this IP address must
3-6 Installation instruction Prod-IQ Office Licence
be announced by the customer's
IT!
Select third language if needed.
©Siempelkamp Maschinen- und Anlagenbau GmbH & Co. KG 2004
Schutzvermerk nach DIN 34 beachten!
Languages to configure manual after installation, if you have entered the wrong values
during the installation:
1. Language: German
2. Language: English
3-8 Installation instruction Prod-IQ Office Licence
3. Language: Enter your language
Note:
IP-Adresse to configure manual after installation, if you have entered the wrong values
during the installation:
<add key="ProductionDataServiceUri"
value="net.tcp://
192.168.180.79:47805/ProdIQServices/ProductionDat
aService"/>
<add key="SystemCheckServiceUri"
value="net.tcp://192.168.180.79:47809/ProdIQServi
ces/SystemCheckService"/>
<add key="MFTServiceUri"
value="net.tcp://192.168.180.79:47810/ProdIQServi
ces/MFTService"/>
4 Additional configurations
Note:
Note:
In case you need to switch
your Prod-IQ® visualiza-
tion between multiple pro-
duction units from one
place you need to install
the switch batchjobs
The batchjob files need to
be copied to the installa-
tion directory
C:\ProdIQ\SICO\ProdIQ
In this example you have a
MDF line and a PB line.
Foreach batchjob you
need a destination directo-
ry (here “Config_MDF”
and “Config_PB”). These
directories include the
configuration files foreach
production unit
Note:
The batchjobs must be run
with administrator rights!
Right click and select “Run
as administrator”
Note:
Depending on your licensing
model you might need to
change the license type in the
software’s configuration
Open the configuration file
(ProdIQVisuConfig.xml) in
C:\ProdIQ\SICO\ProdIQ\Appli
cations with Notepad
(optional)
“Activate”
Schutzvermerk nach DIN 34 beachten!
Note:
The steps may vary depending on
the version of Excel running on the
computer!
7 Test of installation
After the installation it is important, in particular where Domain PCs exists, all Prod-IQ®
visualization modules to start as a "non-admin" user.
©Siempelkamp Maschinen- und Anlagenbau GmbH & Co. KG 2004
Therefore, the user of the office PCs must register with its local account or domain ac-
count.
If all visualization modules can be started without any error messages (license is rec-
Schutzvermerk nach DIN 34 beachten!
ognized, setting files are recognized, ...), so it can be assumed that the installation and
configuration was successful!