Professional Documents
Culture Documents
Analog Switches PF
Analog Switches PF
KEY FEATURES AND BENEFITS NX3/NX5 switches are available in a range of voltages
• Low RON (NX3L family = 0.75 Ω) results in low-loss (1.4 to 5.5 V), support fast data throughput (bandwidth
switching and reduced signal attenuation up to 1 GHz), and offer low ON resistance and input
capacitance. The result is better signal integrity, less
• Wide supply range (1.4 to 4.3 V) and RON flatness
distortion, and lower insertion loss.
(0.1 Ω typ) for reduced total harmonic distortion in
high-quality audio switching NX3L AND NX5L LOW OHMIC SWITCHES
• High current handling (up to 350 mA continuous) for The combination of low ON resistance and low RON
use in varous applications and conditions flatness of the NX3L devices greatly reduces switched signal
• Low leakage (< 50 nA at 85 °C) for longer battery life attenuation and distortion, thus eliminating the need for
Break-before-make switching eliminates risk of momentary buffer amplifiers in many applications.
short between channels
• Over voltage-tolerant control inputs and low-threshold NX3L series
input variants eliminate extra level translators 1.2 Vcc = 1.5 V
• Fully specified (-40 to +85 °C and -40 to +125 °C) 0.8 1.8 V
APPLICATIONS 0
• Cellular handsets and smart phones 0 1 2 3 4 5
VI (V)
• MP3 players and mobile video players NX3L typical ON resistance v switch input voltage
2 8 www.nxp.com
RON
NX3DV series
(Ω)
NX3DV AND NX5DV DATA/VIDEO SWITCHES To improve placement and routing these switches are
NX3DV and NX5DV are higher bandwidth data video offered in small footprint PicoGate, MicroPak and leadless
switches. They are well suited for applications that switch QFN packages, making them a solution for applications
analog VGA signals between a graphics controller and where board space and headroom are at a premium.
multiple displays or that multiplex audio, USB, and UART The NX3 range also includes devices that are automotive
signals via a single connector. qualified per AEC-Q100 grade 1.
The NX5DV715 is a dual supply 1-of-2 VGA switch which
integrates high-bandwidth SPDT switches with level-
translating buffers and level translating switches to provide
switching of input RGB, H-Sync, V-Sync and DDC signals to
either of two output channels.
The NX3DV221 (see eye diagram below) and NX3DV42
are designed for the switching of USB 2.0 signals in handset
and consumer applications.
All NX3 and NX5 products have control inputs with Schmitt-
trigger action making them tolerant to slower input rise
and fall times (up to 200 ns/V). To support mixed-voltage
applications, the NX3LnT and NX3DV products have low
threshold control inputs. This allows a 1.8 V controller to
drive a 3.3 V switch without any external translator devices. NX3DV221 USB2.0 eye diagram
NX3DV221GM USB2.0 switch with enable DPDT-Z 2.3 - 3.6 7 0.7 1000 -40 -40~85 XQFN10 SOT1049-2
four-pole, double-throw
NX3DV2567GU 4PDT 1.4 - 4.3 10.5 330 -60 -40~125 XQFN16 SOT1161-1
switch
four-pole, double-throw
NX3DV2567HR* 4PDT 1.4 - 4.3 10.5 330 -60 -40~125 HXQFN16 SOT1039-2
switch
dual double-pole,
NX3DV3899GU double-throw with low DPDT 1.4 - 4.3 4.2 1 200 0.01 -90 -40~125 XQFN16 SOT1161-1
threshold inputs
dual double-pole,
NX3DV3899HR double-throw with low DPDT 1.4 - 4.3 4.2 1 200 0.01 -90 -40~125 HXQFN16 SOT1039-1
threshold inputs
USB2.0 double pole,
NX3DV42GU DPDT 3.0 - 4.3 6.5 950 -30 -40~85 XQFN10 SOT1160-1
double throw
USB2.0 double-pole
NX3DV42GU33 DPDT 3.0 - 4.3 6.5 -30 -40~85 X2QFN10 SOT1430-1
double-throw
www.nxp.com 3
E0 4Y0 E0 4Y0
2Z 2Z
Z 2Y0 Y1 Z 2Y0
Y1 Y0 Z0 4Z
Z0 1S 1S
4Y1 1Y1 4Y1
E1 1Y1 E1 2S
Y0 Y0
Z1 Y1 1Z Z1 1Z
1Y0 1Y0
VCC(B)
VCC(B)
CLK1+
CLK1+
CLK+
CLK+ 17 17 R1 R1
HSD1-
HSD1- R2 R2
1 1 CLK2+
CLK2+ G1 G1
22 22 G2 G2
D- D- CLK1-
CLK1- ‘1G3157 B1FUNCTION ‘2467 FUNCTION
‘1G53 FUNCTION ’2T6
D+D+ ‘1G3157 FUNCTION ‘1G53 FUNCTION
16 16
’2T66 FUNCTION
B1
CLK- VCC(A)
VCC(A) B2 B2
HSD2-
HSD2- '1T3157 FUNCTIONCLK- '1T53 FUNCTION '1T3157 FUNCTION '1T53 FUNCTION
2 2
'1T5157 FUNCTION E
CLK2-
CLK2- '1T5157 FUNCTION E
23 23 EN EN CONTROL
CONTROL
1D1+
1D1+ LOGIC
LOGIC
1D+
1D+ 15 15 SEL SEL
E0 1Y0
Y1 S Y1 S Y1 S Y1 S
HSD2+
HSD2+ 3 3 1D2+
1D2+ H1 H1
20 20 H0 H0 LEVEL
LEVELY0 Z0 Y0
D- D- D+D+ H2 H2 1Z
1D1-
1D1- TRANSLATING
TRANSLATING
V1 V1
1Y1
1D-1D- 14 14 V0 V0 MUXMUX E
HSD1+
HSD1+ V2 V2
2Y0
Y0 4 4 Z 1D2-
1D2- Y0 Z Y0 Z Y0 Z
21 21 Y1 Z1 2Z Y1
RPU RPU RPU
2D1+
2D1+ 2Y1 1S
2D+
2D+ 13 13
S S 5 5 2D2+
2D2+ SDA1SDA1
OEOE ‘2G384 FUNCTION 19 FUNCTION
19‘4357 ‘2G384 FUNCTION
‘4684SCL1
FUNCTION
SCL1 ‘4357 FUNCTION ‘468
2D1-
2D1- 3Y0 ‘226
OEOE 12 12 LEVELLEVEL ‘2267 ’2750
2D-2D- TRANSLATING
TRANSLATING
SWITCH RPU RPU RPU
RPUSWITCH 2S
S S 6 6 2D2-
2D2- RPU RPU 2Y1 2Y1
18 18 E 3Y1 E3Z
OEOE Y2 Y2
8 8 E0 CONTROL E0 4Y0
CONTROL SDA0SDA0 SDA2SDA2 2Z
11 11 LOGIC Y1
LOGIC SCL0SCL0
Z 2Y0 SCL2SCL2
Y1 Z4Z 2Y0
Y0 Z0 Y0 Z0
1S 4Y1
E1 1Y1 E1 2S 1Y1
Y0 Y0
Y1 Z1 Y1 Z1
1Z
1Y0 1Y0
NX3DV products have low threshold control inputs. This allows a 1.8 V
controller to drive a 3.3 V switch without any external translator devices.
‘2567 FUNCTION ‘4051 FUNCTION ‘2567‘2467
‘4053 FUNCTION FUNCTION
‘2467 FUNCTION
FUNCTION ‘4051 FUNCTION
‘330 FUNCTION ‘3899 FUNCTION
‘4053 FUNCTION
‘1G3157
‘1G3157 FUNCTION
FUNCTION ‘1G53
‘1G53 FUNCTION
FUNCTION ’2T66
’2T66 FUNCTION
FUNCTION
/E /E /E /E
'1T3157
'1T3157 FUNCTION
FUNCTION '1T53
'1T53 FUNCTION
FUNCTION
'1T5157
'1T5157 FUNCTION
FUNCTION E ESUPPLY PATH SUPPLY PATH 4 2 4
1Z 1Y0 1Z
SWITCH SWITCH
1Y0 1Y0 3 1Y0
E0 E0 1Y01Y0 Y0 1Y1 1Y0
Y1 S S Y1 Y1 S S Y0 1Y0
1Z
1Z 1Z 7 5 7
1Y1 Y0 Y0 Z0 Z0 1Y1 1Z 2Z 1Z 2Y0 1Z 2Z
1Z Y1 1Y1 1Y1
Y1 1Y1 1Y11Y1
E E S1 6 2Y0 S1
DATA PATH 2Y02Y0DATA PATH 2Y1
2Z
Y0 Z Z Y0 Y0 SWITCHES Z Z Y2 SWITCHES Y2
Y1 Y1 Z1 Z1 9 2Z 2Z 11 1S 9
3Z 3Y0 2Y1 3Z
2Y0 2Y0 2Y12Y1
2Y0 1S 1S 2Y0
Y3 Y3 10
2Z 2Z 3Y1
2Y1 2Y1 2Z 2Z
‘2G384
‘2G384 FUNCTION
FUNCTION ‘4357
‘4357 FUNCTION
FUNCTION
Y4
‘4684
‘4684 FUNCTION
Z
FUNCTION 2Y1
3Y03Y0 12 Y4
Z 3Y0 2Y1 12
‘2267
‘2267 ’2750
’2750 S2 14 S2
3Y0 3Y0 4Z 4Y0 3Z 4Z
2S 2S 3Z
3Z 2Y12Y1 3Z
3Z Y5 13
3Y1 E EY5 3Y1
3Y13Y1 4Y1 3Y1
Y2 Y2 4Y0 3Y0
E0 E0 3Y0 4Y04Y0
4Y0 2Z 2Z 4Y0 4Z
Y6 2Y02Y0 Y6
Y0 Y1 Y1 Z Z 3Z 4Z 4Z 3Z
Z0 Z0 4Z S1 3Y1
1S 1S 4Z S1 4Y1 3Y1
4Y1 1Y11Y1 S2 4Y14Y1
4Y1 2S
2S Y7 S2 S3
E1 E1 Y7 S3 1 1
Y0 Y0 S S3 S
S S3 2S S
Y1 Z1 Z1 1Z 1Z 2 2
E E
1Y01Y0
ION
N ‘4051
‘4051 FUNCTION
FUNCTION ‘4053
‘4053 FUNCTION
FUNCTION ‘330
‘330 FUNCTION
FUNCTION ‘3899
‘3899 FUNCTION
FUNCTION
/E /E /E /E
TH 4 4 2 2
1Z 1Z 1Y01Y0
3 3 1Y1 1Y01Y0
Y0 Y0 1Y01Y0 1Y1
1Z 1Z 1Z 1Z
7 7 5 5
1Z 1Z 2Z 2Z 2Y02Y0
Y1 Y1 1Y11Y1 1Y11Y1
6 6 2Y02Y0
H 4 S1 S1 2Y12Y1
2Z 2Z
www.nxp.com
S Y2 Y2
9 9 11 11 1S 1S
3Z 3Z 3Y03Y0 2Y12Y1
2Y02Y0
Y3 Y3 10 10
2Z 2Z
NX3L AND NX5L LOW-OHMIC ANALOG SWITCHES
single-pole,
NX3L1G3157GM SPDT-Z 1.4 - 4.3 0.75 0.3 60 0.0024 -90 -40~125 XSON6 SOT886
double-throw
single-pole,
NX3L1G53GM SPDT-Z 1.4 - 4.3 0.75 0.3 60 0.0024 -90 -40~125 XQFN8 SOT902-1
double-throw
single-pole,
NX3L1G53GT SPDT-Z 1.4 - 4.3 0.75 0.3 60 0.0024 -90 -40~125 XSON8 SOT833-1
double-throw
single-pole,
NX3L1T3157GM double-throw with low SPDT 1.4 - 4.3 0.75 0.3 60 0.0024 -90 -40~125 XSON6 SOT886
threshold inputs
single-pole,
NX3L1T5157GM double-throw with low SPDT 1.4 - 4.3 0.75 0.3 60 0.0024 -90 -40~125 XSON6 SOT886
threshold inputs
single-pole,
NX3L1T53GM double-throw with low SPDT-Z 1.4 - 4.3 0.75 0.3 60 0.0024 -90 -40~125 XQFN8 SOT902-1
threshold inputs
single-pole,
NX3L1T53GT double-throw with low SPDT-Z 1.4 - 4.3 0.75 0.3 60 0.0024 -90 -40~125 XSON8 SOT833-1
threshold inputs
dual single-pole
NX3L2267GM double-throw with low SPDT 1.4 - 4.3 0.75 0.3 60 0.02 -90 -40~125 XQFN10 SOT1049-3
threshold inputs
dual single-pole
NX3L2267GU double-throw with low SPDT 1.4 - 4.3 0.75 0.3 60 0.02 -90 -40~125 XQFN10 SOT1160-1
threshold inputs
dual single-pole
NX3L2267SGU double-throw with low SPDT 1.4 - 4.3 0.75 0.3 60 0.02 -90 -40~125 XQFN10 SOT1160-1
threshold inputs
dual double-pole,
NX3L2467GU double-throw with low DPDT 1.4 - 4.3 0.75 0.3 60 0.01 -90 -40~125 XQFN16 SOT1161-1
threshold inputs
dual double-pole,
NX3L2467HR double-throw with low DPDT 1.4 - 4.3 0.75 0.3 60 0.01 -90 -40~125 HXQFN16 SOT1039-1
threshold inputs
dual double-pole,
NX3L2467PW double-throw with low DPDT 1.4 - 4.3 0.75 0.3 60 0.01 -90 -40~125 TSSOP16 SOT403-1
threshold inputs
dual single-pole,
NX3L2G384GM SPST-NC 1.4 - 4.3 0.75 0.3 60 0.0024 -90 -40~125 XQFN8 SOT902-1
single-throw
dual single-pole,
NX3L2T66GM single-throw with low SPST-NO 1.4 - 4.3 0.75 0.3 60 0.0024 -90 -40~125 XQFN8 SOT902-1
threshold inputs
dual single-pole,
NX3L2T66GT single-throw with low SPST-NO 1.4 - 4.3 0.75 0.3 60 0.0024 -90 -40~125 XSON8 SOT833-1
threshold inputs
single-pole,
NX3L4051HR SP8T-Z 1.4 - 4.3 0.75 0.3 15 0.02 -90 -40~125 HXQFN16 SOT1039-1
octal-throw
single-pole,
NX3L4051PW* SP8T-Z 1.4 - 4.3 0.75 0.3 15 0.02 -90 -40~125 TSSOP16 SOT403-1
octal-throw
triple single-pole,
NX3L4053HR SPDT-Z 1.4 - 4.3 0.8 0.3 60 0.02 -90 -40~125 HXQFN16 SOT1039-1
double-throw
triple single-pole,
NX3L4053PW* SPDT-Z 1.4 - 4.3 0.8 0.3 60 0.02 -90 -40~125 TSSOP16 SOT403-1
double-throw
single-pole,
NX3L4357GM triple-throw with low SP3T-Z 1.4 - 4.3 0.75 0.35 30 0.02 -90 -40~125 XQFN10 SOT1049-2
threshold inputs
dual single-pole
NX3L4684GM double-throw with low SPDT 1.4 - 4.3 0.8 0.3 25 0.01 -90 -40~125 XQFN10 SOT1049-3
threshold inputs
dual single-pole
NX3L4684TK double-throw with low SPDT 1.4 - 4.3 0.8 0.3 25 0.01 -90 -40~125 HVSON10 SOT650-2
threshold inputs
single-pole
NX5L2750CGU double-throw audio, SPDT 1.8 - 5.0 0.8 0.3 100 0.03 -60 -40~85 XQFN10 SOT1160-1
negative swing
*Also available in AEC-Q100 qualified version.
www.nxp.com 5
OE OE LOGIC SCL0 SCL2
8 8 11
CONTROL
CONTROL SDA0 SDA0 SDA2 SDA2
11 11 LOGIC LOGIC SCL0 SCL0 SCL2 SCL2
‘2567 FUNCTION ‘4051 FUNCTION ‘4053 FUNCTION ‘330 FUNCTION ‘3899 FUNCTION
/E /E
2567 FUNCTION
‘2567 FUNCTION ‘4051 FUNCTION
‘4051 FUNCTION ‘4053 FUNCTION
‘4053 FUNCTION ‘330 FUNCTION
‘330 FUNCTION ‘3899 FUNCTION
‘3899 FUNCTION
SUPPLY PATH /E /E /E /E 4 2
1Z 1Y0
PATH PATH SWITCH
SUPPLYSUPPLY 4 4 2 2
1Z 1Z 1Y0 1Y0 3 1Y0
SWITCH1Y0
SWITCH 1Y1
Y0 1Y0
1Y0 1Y0 1Z 3 3 1Y0 1Y0 1Z
Y0 Y0 1Y0 1Y0 7 1Y1 1Y1 5
1Y1 1Z 2Z 2Y0 1Z 1Z
1Z 1Z Y1 1Y1 7 7 5 5 1Y1
1Y1 1Y1 1Z 1Z 2Z 2Z 2Y0 2Y0 6 2Y0
DATA PATH
Y1 Y1 1Y1 1Y1 S1 1Y1 1Y1
2Y1
6 6 2Y0 2Y0 2Z
DATA PATH SWITCHES
DATA PATH Y2 S1 S1
9 2Y1 2Y1
2Z 2Z 1S
11
SWITCHES
SWITCHES
2Y0 Y2 Y2 3Z 3Y0 2Y1
2Y0 9 9 11 11 1S 1S
2Y0 2Y0 Y3 3Z 3Z 2Y1 10
3Y0 3Y0 2Y1
2Z 2Y0 2Y0 3Y1
2Y1 Y3 Y3 2Z
2Z 2Z Z 2Y1 10 10
2Y1 2Y1 Y4 2Z 2Z 12 3Y1 3Y1 3Y0
S2 14
3Y0 Z Z 2Y1 2Y1 4Z 3Y0 3Y04Y0 3Z
Y4 Y4 S2 S2 4Z 12 12 14 14
3Y0 3Y0 3Z 4Z 4Y0 4Y0 13 3Z 3Z
3Y1 Y5 4Y1 3Y1
3Z 3Z Y5 Y5 3Y0 13 13 3Y1 3Y1 4Y0
3Y1 3Y1 4Y1 4Y1 4Z
4Y0 Y6 4Y0 4Y0
3Y0 3Y0 3Z
4Y0 4Y0 4Z 4Z 4Z
Y6 Y6 S1 3Y1 4Y1
4Y1 S2 3Z 3Z S3
4Z 4Z Y7 S1 S13Y1 3Y1 1
4Y1 4Y1 S 4Y1 4Y1 2S
S3
Y7 Y7 S S2 S2 S3 S3 1 1 2
S S S3 S3 S S E 2S 2S
2 2
E E
NX3LnT products have low threshold control inputs. This allows a 1.8 V
controller to drive a 3.3 V switch without any external translator devices.
6 www.nxp.com
BLOCK DIAGRAMS OF NX3L AND NX5L LOW-OHMIC ANALOG SWITCHES
PACKAGE SUFFIX GM GT GM TK GM GU GU
www.nxp.com
NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their respective owners.
© 2022 NXP B.V.