Professional Documents
Culture Documents
ch29 of Mikell P Groover: Principles of Modern Manufacturing, 5th Edition
ch29 of Mikell P Groover: Principles of Modern Manufacturing, 5th Edition
Groover 2013
Excerpts from this work may be reproduced by instructors for distribution on a not-for-profit basis for testing or instructional purposes only to
students enrolled in courses for which the textbook has been adopted. Any other reproduction or translation of this work beyond that permitted
by Sections 107 or 108 of the 1976 United States Copyright Act without the permission of the copyright owner is unlawful.
© Mikell P. Groover 2013
29.11 Which of the following are problems with the current rapid prototyping and additive
manufacturing technologies (three best answers): (a) inability of the designer to design the
part, (b) inability to convert a solid part into layers, (c) limited material variety, (d) part
accuracy, (e) part shrinkage, and (f) poor machinability of the starting material?
Excerpts from this work may be reproduced by instructors for distribution on a not-for-profit basis for testing or instructional purposes only to
students enrolled in courses for which the textbook has been adopted. Any other reproduction or translation of this work beyond that permitted
by Sections 107 or 108 of the 1976 United States Copyright Act without the permission of the copyright owner is unlawful.