Professional Documents
Culture Documents
Isuzu C240 Main Bearing
Isuzu C240 Main Bearing
j. Apply a coat of silicon adhesive (564R46001101) to cylinder block fitting surface for No. 1 and No. 5 bearing
cap.
k. Install No. 1 and No. 5 bearing caps and ensure arch gasket makes firm contact with cylinder block side.
I. Install remaining bearing caps with bearing cap head arrow mark facing forward. Bearing cap stamped with
a letter (A, B, C, etc.) must be installed at the No. 2 position.
m. Apply a coat of engine lubricating oil (MIL-L-2104) to ten bearing cap bolts and install them in bearing caps
hand-tight.
n. Tighten bearing cap bolts to 123.0 ft-lbs (166.6 Nm), a little at a time, in sequence shown in FIGURE 3-95.
3-145