Professional Documents
Culture Documents
External WS, Drainage, Storm Water, Roads
External WS, Drainage, Storm Water, Roads
(Lead)
(Lead) charges for
charges for (Lead)
trucks and
charges for
trucks and tippers for
tippers for trucks and
Cement/
tippers for
Earth /
Sand Steel/ RCC
Rubble/Size
Sl No. Distance
/Gravel / stones/ Cut poles/ AC
Stones/ & GI
Murrum/
Coarse sheets/
Lime/
per Packed
Surki/ per aggregate
cu.meter
cu.meter materials
/tonne
1 2 3 4 5
1 Lead up to 1 km 1 40.40 38.90 24.30
2 Lead up to 2 km 2 56.60 54.50 34.10
3 Lead up to 3 km 3 75.40 75.40 47.10
4 Lead up to 4 km 4 91.60 91.60 57.20
5 Lead up to 5 km 5 107.80 107.80 67.40
6 for Every km beyond 5 km up to 30 km 30 16.20 16.20 10.10
7 for Every km beyond 30 km 10000 13.50 13.50 8.40
6 7 8
57.30 23.70 64.90
80.20 33.20 90.90
110.90 44.30 121.20
134.70 53.80 147.10
158.50 63.20 173.10
23.80 9.50 26.00
19.80 7.90 21.60
Steel in Bricks
Rs/Tonne Rs/1000 Nos.
104.30 72.50
104.30 72.50
DATA (SoR 2021-22)
WATER SUPPLY AND SANITARY ITEMS
Sl. Plumbing SoR Page
ITEM Item code Rate
No. Items No.
Supply, laying, jointing 101.60 mm dia
1
SWG pipe
a) up to 1524mm (5') depth 209 TBSP-A.I-01 550.00
b) up to 914.40mm (3') depth 209 TBSP-A.I-02 475.00
Supply, laying, jointing 152.40mm dia
2
SWG pipe
a) up to 1524mm (5') depth 209 TBSP-A.I-03 795.00
b) up to 914.40mm (3') depth 209 TBSP-A.I-04 707.00
TBSP-E.I-03/TBSP-
14 Orissa pan 580mmx440mm - ISI marked 221/225 2018.00
E.VIII-02
15 Brick masonry seat 221 TBSP-E.I-06 308.00
16 C.C Squatting plate 221 TBSP-E.I-07 92.00
TBSP-E.II-02/
17 S&F EWC with'S' trap 221/225 1929.00
TBSP-E.VIII-06
TBSP-E.V-01/
18 S&F Plastic seat and lid for EWC 223/225 1186.00
TBSP-E.VIII-07
TBSP-F.I-01 /
15 mm brass body CP finish bib tap of
28 225/229 TBSP-F.VIII- 250.00
not less than 300 grams weight
01
Chromium plated finish brass body
quarter turn Bibcock cum Health Faucet TBSP-F.I-07/TBSP-
29 226/229 3266.00
with 1m long tube and wall hook with 7 - F.VIII-01
10 years warranty
15 mm brass body CP finish self type TBSP-F.III-01 /
30 226/229 275.00
conforming to IS 1711closing tap push /TBSP-F.VIII-01
15 mm nominal size CP finish brass TBSP-F.IV-03
29 227/229 241.00
angled stop valve screw type TBSP-F.VIII-02
S&F 15 mm nominal size 152.0 mm CP TBSP-F.VI-01/
30 228/230 192.00
finish iron body shower TBSP-F.VIII-04
TBSP-F.VII-21/
31 CP finish brass soap dish 229/230 577.00
TBSP-F.VIII-04
32 S&F 31.75mm brass plumber union 229 TBSP-F.VII-30 71.00
1 RM 491.00
1 RM 423.00
1 RM 708.00
1 RM 630.00
1 RM 252.00
1 RM 313.00
1 Each 7321.00
7321
1 Each 11649.00
11649
1 Each 3813.00
3813
1 Each 76.00
76
1 Each 124.00 124
1 Each 6224.00
6224
1 Each 4448.00
4448
1 Each 652.00 652
1 Each 449.00
449
1 RM 184.00 184
1 RM 204.00 204
1 RM 268.00 268
1 RM 375.00 375
1 RM 420.00 420
1 RM 452.00 452
1 RM 802.00
802
1 Each 577.00 577
1 Each 778.00 778
1 Each 1119.00 1119
1 Each 1700.00 1700
1 Each 2297.00 2297
1 Each 3365.00 3365
1 Each 5196.00 5196
1 Each 7702.00 7702
3 RM 252.00 252
3 RM 401.00 401
3 RM 479.00 479
3 RM 1140.00 1140
1 Lt 7.00
7
1 Each 26.00
26
1 Each 15.00 15
1 Each 17.00 17
1 Each 18.00 18
1 Each 35.00 35
1 Each 101.00 101
1 Each 143.00 143
88.00 1 Each 76.00
35.00 1 RM 30.00
55.00 1 RM 47.00
1 Each 38.00 38
1 Each 149.00
149
1 Each 24.00
24
1 Each 101.00
101
1 Each 466.00
466
1 RM 128.00 128
1 RM 146.00 146
1 RM 193.00 193
1 RM 263.00 263
1 RM 327.00 327
1 RM 477.00 477
1 RM 141.00 141
1 RM 172.00 172
1 RM 206.00 206
1 RM 281.00 281
1 RM 348.00 348
1 RM 508.00 508
1 Rm
1 Rm
1 Rm
1 Rm
118 MS powder coated tower bolt 100mm long 156 TBSC-P.I-14 26.00
119 MS powder coated tower bolt 150mm long 156 TBSC-P.I-15 37.00
120 MS powder coated tower bolt 200mm long 156 TBSC-P.I-16 55.00
167 Dismantling
a) Stone masonry in cement mortar 182 TBSC-U.I-01 510.00
Buildings Reference
Material hire Labour
168 Hire charges for Access Scaffolding to SSR
charges charges
page
A) Brick Masonry / Stone Maasonry
a) 1st floor 196 10.86 88.60
b) 2nd floor 10.86 127.46
c) 3rd floor 10.86 166.33
d) 4th floor 10.86 205.20
e) 5th floor 10.86 244.06
f) 6th floor 10.86 282.93
g) 7th floor 10.86 321.80
h) 8th floor 10.86 360.66
i) 9th floor 10.86 399.53
10.86 438.40
B) Plastering to walls
a) 1st floor 196 1.09 8.86
b) 2nd floor 1.09 12.75
c) 3rd floor 1.09 16.63
d) 4th floor 1.09 20.52
e) 5th floor 1.09 24.41
f) 6th floor 1.09 28.29
g) 7th floor 1.09 32.18
h) 8th floor 1.09 36.07
i) 9th floor 1.09 39.95
1.09 43.84
169 Hire charges for Stage Scaffolding
Ceiling Plastering
a) 1st floor 197 2.59 17.79
b) 2nd floor 2.59 25.39
c) 3rd floor 2.59 32.99
d) 4th floor 2.59 40.59
e) 5th floor 2.59 48.19
f) 6th floor 2.59 55.79
g) 7th floor 2.59 63.40
h) 8th floor 2.59 71.00
i) 9th floor 2.59 78.60
170 75.9
Buildings Reference Material hire
to SoR charges L
1st
Floor
a) Footings 195 304.00 718.00
b) Bed blocks, Steps 67.00 370.00
c) Pedestals 346.00 1141.00
d) Plinth beams 1467.00 1730.00
172 HIRE CHARGES FOR CENTERING & SCAFFOLDING -Unsupported height of 3.66M - Ca
Buildings Reference Material hire
L
to SoR charges
1st
Floor
a) Lintels 199 831.00 1399.00
b) Sunshades of any width 164.00 215.00
c) Columns 250.00 1965.00
d) Beams 1467.00 1648.00
e) RCC roof slabs upto 150 mm depth 166.00 187.00
f) RCC slabs upto 150-300 mm depth 171.00 192.00
g) RCC walls, water tank walls 1149.00
P&H Page 5
(RCC vertical walls)
173 Plumbing
PVC Clamps 110 mm items 236 TBSP-H.II-61 20.00
Plumbing
PVC Clamps 160 mm items 213 TBSP-H.II-62 39.00
1000 Nos. 7
1 No.
1 No.
1 No.
10 Sqm
10 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 cum
1 cum
1 cum
1 cum
1 cum
1 cum
1 cum
1 cum
1 cum
1 sqm
1 Kg
1 sqm
1 No.
1 No.
1 No.
1 No.
1 No.
1 Sqm
1 Sqm
1 Sqm
1 Kg
1 Kg
1 sqm
1 sqm
1 sqm
1 sqm
1 sqm
1 Kg
1 Kg
1 Kg
1 Ltr
1 Ltr
1 Ltr
1 Kg
1 Ltr
1 Ltr
1 Ltr
1 Ltr.
1 Kg
82
1 Kg
1 Ltr
1 Ltr
1 Ltr
1 Ltr
1 Kg
1 Kg
1 Ltr.
1 Ltr.
1 Ltr.
1 sqm
1 sqm
1 sqm
1 sqm
1 sqm DELETED
1 sqm
1 sqm
1 sqm
1 RM
1 RM
1 RM
1 RM
1 RM
1 RM
1 RM
1 RM
24x32 Rs. 50 45
1 RM
24x32 Rs. 50 45
1 RM
1 RM
1 RM
768
1 No.
1 No.
1 No.
1 No.
1 No.
1 Kg.
1 RM
1 Ltr
1 No.
1 RM
1 RM
1 sqm
3490
1 RM
688
1 sqm
1 sqm
1 sqm 7048.00
1 sqm
7989
1 sqm
1026
1 sqm
10940
1 sqm 6664
1 sqm
5937
1 sqm
5391
1 sqm
7996
1 sqm
7270 Previous SSR
1 sqm
6361 Centre fixed both side o
1 sqm
7032
1 sqm
6765 Pre painted steel Windo
1 sqm
6010 Supply and fixing of UP
1 sqm
6657 Supply and fixing of UP
1 sqm
7481 Supply and fixing of pre
1 sqm 6907
1 sqm 4725
1 sqm
5990
1 sqm
8428
1 sqm 5997.00
1 sqm 5089.00
1 sqm 3511.00
1 sqm 7270.00
1 sqm 5875.00
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No. 21.00
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 Ltr 191.00
1 Ltr deleted
207
1 sqm SoR 2020-21
1 sqm
1 Kg
1 Kg
1 RM
1 sqm
1 sqm 2868.00
1 sqm 562.00
1 sqm
1 sqm
1 hour
1 hour 121.00
1 RM 117.00
1 RM 353.00
1 RM 458.00
1 RM 18.00
1 RM 55.00
1 Kg 29.00
1 Kg
1 Kg 146.00
1 sqm 1063.00
1 sqm 426.00
1 sqm 318.00
1 cum 442.00
1 sqm 16.00
1 sqm 14.00
1 cum 230.00
1 sqm 4.00
1 sqm 5.00
1 sqm 7.00
1 sqm 4.00
1 sqm 5.00
Unit
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
1 Sqm
75.95
OLDING -Unsupported height of 3.66M - Steel scaffolding pipes, jack props, Steel centering Plates etc.
supported height of 3.66M - Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc.,
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
2018-19
1 Kg 50
1 No. 8
1 Cum
1 Cum
1 Cum
1 Kg 79
Blasting
1 Cum Charges
1 Cum 505.00 70
1 Cum 657.00 70
1 Cum 781.00 70
1 Cum 870.00 70
1 Cum 505.00 70
1 Kg
1 KL
1 KL
1 RM
1 RM
SoR 2018-19
Crew Hire & Fuel SoR 2018-19
charges Crew
charges charges SoR 2017-
18
1 hour 270.80 1121.60 237.10 983.90 235.6
1 hour 426.70 237.50 370.60 237.10 109.2
1 cum
1 cum
1 RM
0 0
1 cum 0.00
1 cum
1 RM
1 Hour
1 Hour I & CAD
1 Hour
1 Hour
1 Hour
1 Hour
1 Hour
1 Hour
1 Hour I & CAD
1 Hour
1 Hour
1 Hour
1 Hour I & CAD
1 Hour
1 Hour I & CAD
1 Hour
1 Hour
1 Hour
1 Hour
1 Hour
1 Hour
1 sqm
1 No.
1 No.
1 No.
1 RM
1 RM
1 No.
1 No.
1 No.
1 sqm
1 No.
1 RM
1 sqm
1 No.
1 No.
1 No.
Previous SSR 2017-18
TBSC-H.IV-22 667.00
24x25 Rs. 45 41
24x25 Rs. 45 41
Previous SSR
Supply and fixing of prepainted steel sliding door - 3 track - 3 panel sliding doorsliding
2017-18 2018-19
75.68 79.46
108.36 113.78
141.04 148.09
173.72 182.41
206.4 216.72
239.08 251.03
173.72 182.41
206.4 216.72
239.08 251.03
7.57 7.95
10.84 11.38
14.1 14.80
17.37 18.24
20.64 21.67
23.91 25.11
173.72 182.41
206.4 216.72
239.08 251.03
15.15 15.91
21.5 22.57
27.84 29.23
34.19 35.90
40.54 42.56
46.88 49.22
206.4 216.72
239.08 251.03
Unit
Cum
Cum 325.00
Cum
Cum
Unit
Cum
Sqm
Cum
Cum
Sqm
Sqm
s etc.,
Unit
Cum 2607
Sqm 400
Cum 3663
Cum 3071
Sqm 348
Sqm 359
Sqm
Crushing Charges
126.25 701.25
164.25 891.25
195.25 1046.25
217.5 1157.50
126.25 701.25
839.3 1074.9
134.3 243.5
93.3 148.9
20.8
20.3 26.1
1025 2649
219.30 342.3
2017-18
10
100
40
20
26
32
600
32
10
170
80
224
100
30
30
675
641
100
75
174
A
D Allowances
1 Add for MA @ 20% 0.20
0.13615
Overheads & Contractors Profit @ 13.615%
2
LEAD CHART (COMMON SoR 2020-2021) (Cement & Steel - May, 2021 rates)
Reference Convey-
Unloading MA
Sl. to SSR S.No./ Item Lead in Initial ance Loading
Description Source of Materials Unit charges (-) Total
No. page Code No. KM Cost Charges (-) charges
13.615% 20%
number 13.615%
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
1 Ordinary Portland Cement 43 / 53 grade (including NRB 1 MT 5600.00 5600.00
loading charges)
2 Reinforcement steel Fe- 500 1 MT 56000.00 56000.00
3 Reinforcement steel Fe- 415 1 MT 0 0
4 Mild steel bars 1 MT 55000.00 55000.00
5 Structural steel 1 MT 50000.00 50000.00
6 MS flats 1 MT 52000.00 52000.00
7 Sand (un-screened for concrete items) 0 2 27 1 Cum 0.00 600.00 0.00 600.00
8 Sand (screened for mortar, plastering items) 0 2 28 0.00 800.00 0.00 800.00
9 Sand for filling 0 2 27 1 Cum 0.00 600.00 0.00 600.00
10 Common burnt clay bricks (23x11x7cm) 0 47 TBSC-A.I-01 1000 Nos 0.00 7000.00 0.00 63.81 12.76 7076.57
11 Flyash cement / lime solid blocks (50 Kgs/ sq.cm) 0 47 TBSC-A.II-08 1000 Nos 0.00 26000.00 0.00 26000.00
290mmx225mmx140mm
12 Flyash cement / lime solid blocks (50 Kgs/ sq.cm) 0 47 TBSC-A.II-11 1000 Nos 0.00 12000.00 0.00 12000.00
290mmx100mmx140mm
13 Aggregates 40mm nominal size (HBG) 0 0 S.No.25/33 f 1 Cum 0.00 701.25 0.00 701.25
14 Aggregates 20mm nominal size (HBG) 0 0 S.No.25/33 d 1 Cum 0.00 1157.50 0.00 1157.50
15 Aggregates 13.20 / 12.50mm nominal size (HBG) 0 0 S.No.25/33 c 1 Cum 0.00 1046.25 0.00 1046.25
16 Aggregates 10mm nominal size (HBG) 0 0 S.No.25/33 b 1 Cum 0.00 891.25 0.00 891.25
17 Aggregates 6mm nominal size (HBG) 0 0 S.No.25/33 a 1 Cum 0.00 701.25 0.00 701.25
18 Rough Stone (OTG) 0 (Part II) 1 (22.a) 1 Cum 0.00 152.00 0.00 152.00
Roads &
19 Rough Stone (HBG) 0 Bridges
(Part II) 12 (g) 1 Cum 0.00 239.00 0.00 239.00
Roads &
20 Gravel / Quarry spall 0 Bridges
0 S.No.89/34 1 Cum 0.00 98.00 0.00 98.00
Reference Convey-
Unloading MA
Sl. to SSR S.No./ Item Lead in Initial ance Loading
Description Source of Materials Unit charges (-) Total
No. page Code No. KM Cost Charges (-) charges
13.615% 20%
number 13.615%
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
21 Polished Shahabad / Tandur stone slabs 15mm to 0 48 TBSC-B.I-03 10 Sqm 0.00 1730.00 0.00 3.83 0.77 1734.59
18mm thick
22 Polished black Kadapa slabs 15mm to 18mm thick 0 48 TBSC-B.I-06 10 Sqm 0.00 1440.00 0.00 3.83 0.77 1444.59
23 High Polished Granite 16 to 18 mm thick up to 8'-00 49 TBSC-B.III- 1 Sqm - 2845.00 2845.00
(2.43 M) other than black and regular colours 02
24 High Polished Granite 16 to 18 mm thick up to 8'-00 49 TBSC-B.III- 1 Sqm - 2419.00 2419.00
(2.43 M) black. 03
Roads &
For Road work
Bridges
25 Aggregate 40mm to 45mm size (IRC, MORTH
do Sl.No.50 33 g 1 Cum 0.00 520.00 70.00 130.00 0.00 720.00
&MORD)
26 Aggregate 25mm to 27mm size (IRC, MORTH
do Sl.No.49 33 f 1 Cum 0.00 790.00 70.00 197.50 0.00 1057.50
&MORD)
27 Aggregate 19mm to 22mm size (IRC, MORTH
do Sl.No.48 33 e 1 Cum 28.00 821.00 70.00 205.25 388.60 1484.85
&MORD)
28 Aggregate 12mm to 14mm size (IRC, MORTH
do Sl.No.47 33 d 1 Cum 28.00 700.00 70.00 175.00 388.60 1333.60
&MORD)
29 Aggregate 9.5mm to 11.20mm size (IRC, MORTH
do Sl.No.46 33 c 1 Cum 28.00 620.00 70.00 155.00 388.60 1233.60
&MORD)
30 Aggregate 5.0 mm to 7.00mm size (IRC, MORTH
do Sl.No.45 33 b 1 Cum 28.00 485.00 70.00 121.25 388.60 1064.85
&MORD)
31 Aggregate 2.36 mm to 5.00mm size (IRC, MORTH
do Sl.No.45 33 a 1 Cum 28.00 485.00 70.00 121.25 388.60 1064.85
&MORD)
32 Aggregate 2.36 mm below do Sl.No.91 35b 1 Cum 28.00 524.00 0.00 388.60 912.60
33 Aggregate 60mm to 63mm size (IRC, MORTH
do Sl.No.52 33 i 1 Cum 28.00 400.00 70.00 100.00 388.60 958.60
&MORD)
34 Bitumen VG 30 Grade (60/70 Grade) Chennai IOCL 1 MT 630.00 31450.00 1890.00 33340.00
35 Bitumen VG 10 Grade (80/100 Grade) Chennai IOCL 1 MT 630.00 30650.00 1890.00 32540.00
36 Emulsion Rapid Setting (RS1) Chennai IOCL 1 MT 630.00 25080.00 1890.00 26970.00
37 Emulsion Slow Setting (SS1) Chennai IOCL 1 MT 630.00 43770.00 1890.00 45660.00
38 Hume pipes 300mm Dia., NP3 15 KMs 59.15 935 994.15
1) Certified that the leads mentioned in the lead statement are shortest and correct.
2) Certified that metal are to be obtained by blasting.
3) Certified that sufficient quantities & quanlity material are available in the quarries.
4) Certified that for non SSR items lowest market rates are adopted
5) Certified that 20% extra on labour towards Municipal area allowance is allowed
JOINERY DATA
COMMON SoR 2021-2022
b) Labour charges for aluminium doors ( S.No.11 of Page No. 396 of SoR 2011-12 )
1st class carpenter 0.099 Nos. 645.00 Each 63.86
2nd class carpenter 0.198 Nos. 515.00 Each 101.97
Power Saw Cutter -Hand Operated -Operator 0.099 Nos. 645.00 Each 63.86
Power Drill -Hand Operated -Operator 0.099 Nos. 645.00 Each 63.86
Mazdoor(Unskilled) 0.297 Nos. 490.00 Each 145.53
Non-technical work inspector 0.099 Nos. 645.00 Each 63.86
Add for MA @ 20% 0.20 502.92 100.58
Machinery
Power Saw Cutter -Hand Operated -Hire charges 0.793 Hrs 137.00 1 Hour 108.64
Power Drill -Hand Operated -Hire charges 0.793 Hrs 128.00 1 Hour 101.50
813.65
Power charges for Motors 1% 0.01 813.65 8.14
Labour charges per 1 sqm Or Say 821.79
c) Labour charges for aluminium sliding windows ( S.No.10 of Page No. 395 of SoR 2011-12 )
1st class carpenter 0.096 Nos. 645.00 Each 61.92
2nd class carpenter 0.289 Nos. 515.00 Each 148.84
Power Saw Cutter -Hand Operated -Operator 0.096 Nos. 645.00 Each 61.92
Power Drill -Hand Operated -Operator 0.096 Nos. 645.00 Each 61.92
Mazdoor(Unskilled) 0.289 Nos. 490.00 Each 141.61
Non-technical work inspector 0.096 Nos. 645.00 Each 61.92
Add for MA @ 20% 0.20 538.13 107.63
C.Machinery
Power Saw Cutter -Hand Operated -Hire charges 0.771 Hrs 137.00 1 Hour 105.63
Power Drill -Hand Operated -Hire charges 0.771 Hrs 128.00 1 Hour 98.69
850.07
Power charges for Motors 1% 0.01 850.07 8.50
Labour charges per 1 sqm Or Say 858.57
d) Labour charges for aluminium partitions partly glazed ( S.No.8 of Page No. 394 of SoR 2011-12 )
1st class carpenter 0.434 Nos. 645.00 Each 279.93
2nd class carpenter 0.434 Nos. 515.00 Each 223.51
Power Saw Cutter -Hand Operated -Operator 0.043 Nos. 645.00 Each 27.74
Power Drill -Hand Operated -Operator 0.058 Nos. 645.00 Each 37.41
Mazdoor(Unskilled) 0.145 Nos. 490.00 Each 71.05
Non-technical work inspector 0.072 Nos. 645.00 Each 46.44
Add for MA @ 20% 0.20 686.08 137.22
C.Machinery
Power Saw Cutter -Hand Operated -Hire charges 0.347 Hrs 137.00 1 Hour 47.54
Power Drill -Hand Operated -Hire charges 0.463 Hrs 128.00 1 Hour 59.26
930.09
Power charges for Motors 1% 0.01 930.09 9.30
Labour charges per 1 sqm Or Say 939.39
e) Labour charges for aluminium casement windows ( S.No.9 of Page No. 394 of SoR 2011-12 )
1st class carpenter 0.100 Nos. 645.00 Each 64.50
2nd class carpenter 0.300 Nos. 515.00 Each 154.50
Power Saw Cutter -Hand Operated -Operator 0.100 Nos. 645.00 Each 64.50
Power Drill -Hand Operated -Operator 0.100 Nos. 645.00 Each 64.50
Mazdoor(Unskilled) 0.300 Nos. 490.00 Each 147.00
Non-technical work inspector 0.100 Nos. 645.00 Each 64.50
Add for MA @ 20% 0.20 559.50 111.90
C.Machinery
Power Saw Cutter -Hand Operated -Hire charges 0.800 Hrs 137.00 1 Hour 109.60
Power Drill -Hand Operated -Hire charges 0.800 Hrs 128.00 1 Hour 102.40
883.40
site of teak wood frame, shutters, glass including supply and fixing 6 nos MS Zhold fasts of size 300 mm x 40
mm x 5mm including cost of ISI marked brass fixtures of 8 Nos butt hinges(IS:205) 250mm long , 1 No. aldrop
(IS:2681) 450mm long, 3 Nos tower bolts- 10mm (IS:204) of 200 mm long , 2 Nos 450 mm long fancy handles, 2
Nos door stoppers including fixing the fixtures to door with required number of screws, bolt and nuts including
labour charges for fixing the frame in position, fixing the shutters to the frame, fixing glass in fan light portion etc.,
including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The
vertical frame of door shall be embedded in flooring for a depth of not less than 40 mm) (3000mm x 2600mm)
Cost of 450mm long brass fancy handles TBSC- 2 Nos 1558.00 Each 3116.00
P.III-11
Cost of 450mm long brass heavy duty aldrop 1 No 3354.00 Each 3354.00
TBSC-P.IV-03
Cost of 200mm long brass tower bolts TBSC- 3 Nos 331.00 Each 993.00
P.I-03
Cost of brass door stoppers TBSC-P.IX-01 2 Nos 189.00 Each 378.00
Cost of Z hold fasts TBSC-P.IX-08 6 Nos 34.00 Each 204.00
Labour charges 0.3449 Cum 14117.80 1 Cum 4869.23
Add for MA @ 20% 0.20 4869.23 973.85
Labour charges for fixing glass TBSC-T.I-26 2.80 Sqm 366.00 1 Sqm 1024.80
Add for MA @ 20% 0.20 1024.80 204.96
Labour charges for glass designing work (Etching 1.80 Sqm 1224.00 1 Sqm 2203.20
work)
TBSC-T.I-22
Add for MA @ 20% 0.20 2203.20 440.64
Add for screws and nails
Rate for 7.80 Sqm 76683.94
Rate for 1 Sqm 9831.27
Overheads & Contractors Profit @ 13.615% 0.13615 9831.27 1338.53
11169.80
Or Say 11170
fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of
6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts - 10mm
(IS:204) of 200 mm long at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber
bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour
charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc.,
including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 The
vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1800mm x 2600mm).
(BLD-CSTN-13-16)
Size : 1.80m x 2.60m 4.68 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.80 + 0.50
= 4.10 x 0.10 x 0.065 0.02665 cum
0.06058 cum
4 mm thick pin headed glass 2x0.9 x 0.50 0.90 sqm
Teak wood beading 2 x 2 (0.90+0.50) 5.60 RM
30 mm thick flush shutter 2 x 0.85 x 2.05 3.485 sqm
10 mm MS square bars 2 x 1.80 x 0.785 2.826 Kgs
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.03393 cum 84724.00 1 cum 2874.69
Cost of medium TW frame up to 2 m length 0.02665 cum 76251.00 1 cum 2032.09
Cost of 4 mm thick pin headed glass TBSC-F.II-01 0.90 sqm 315.00 1 sqm 283.50
all sides, including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6
Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos.
butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x
10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber bushes
including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for
fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc., including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame
of door shall be embedded in flooring for a depth of not less than 10 mm) (1500mm x 2600mm)
(BLD-CSTN-13-16)
Size : 1.50m x 2.60m 3.90 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 = 0.03393 cum
Outer frame - Horizontal 2 x 1.50 + 0.50
= 3.50 x 0.10 x 0.065 = 0.02275 cum
0.05668 cum
4 mm thick pin headed glass 2 x 0.75 x 0.5 = 0.75 sqm
Teak wood beading 2 x 2 (0.75+ 0.50) = 5.00 RM
30 mm thick flush shutter 2 x 0.70 x 2.05 = 2.87 sqm
10 mm MS square bars 2 x 1.50 x 0.785 = 2.355 Kgs
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.03393 cum 84724.00 1 cum 2874.69
Cost of medium TW frame up to 2 m length 0.02275 cum 76251.00 1 cum 1734.71
Cost of 4 mm thick pin headed glass TBSC-F.II-01 0.75 sqm 315.00 1 sqm 236.25
on all sides, including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing
6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos.
butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x
10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber bushes
including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for
fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including overheads
& contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall
be embedded in flooring for a depth of not less than 10 mm) (1200mm x 2600mm)
(BLD-CSTN-13-16)
Size : 1.20m x 2.60m 3.12 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 = 0.03393 cum
Outer frame - Horizontal 2 x 1.20 + 0.50
= 2.90 x 0.10 x 0.065 = 0.01885 cum
0.05278 cum
4 mm thick pin headed glass 2x0.6 x 0.5 = 0.60 sqm
Teak wood beading 2 x 2 (0.6 + 0.50) = 4.40 RM
30 mm thick flush shutter 2 x 0.55 x 2.05 = 2.255 sqm
10 mm MS square bars 2 x 1.20 x 0.785 = 1.884 Kgs
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.03393 cum 84724.00 1 cum 2874.69
Cost of medium TW frame up to 2 m length 0.01885 cum 76251.00 1 cum 1437.33
Cost of 4 mm thick pin headed glass TBSC-F.II-01 0.60 sqm 315.00 1 sqm 189.00
fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of
3 Nos. butt hinges (IS:205) 150mm long , 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200
mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush
including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for
fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame
of door shall be embedded in flooring for a depth of not less than 10 mm) (1000mm x 2600mm).
(BLD-CSTN-13-16)
Size : 1.00m x 2.60m 2.60 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.00
= 2.00 x 0.10 x 0.065 0.01300 cum
0.04693 cum
4 mm thick pin headed glass 1.00 x 0.50 0.50 sqm
Teak wood beading 2 x (1+ 0.50) 3.00 RM
30 mm thick flush shutter 1 x 0.90 x 2.05 1.845 sqm
10 mm MS square bars 2 x 1.00 x 0.785 1.570 Kgs
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.03393 cum 84724.00 1 cum 2874.69
Cost of medium TW frame up to 2 m length 0.0130 cum 76251.00 1 cum 991.26
Cost of 4 mm thick pin headed glass TBSC-F.II-01 0.50 sqm 315.00 1 sqm 157.50
shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI
marked Aluminium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2
Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door
stoppers and 2 Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and
nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc, including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame
of door shall be embedded in flooring for a depth of not less than 10 mm) (2000mm x 2100mm)
(BLD-CSTN-13-16)
Size : 2.00m x 2.10m 4.20 Sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 = 0.02743 cum
Outer frame - Horizontal 1 x 2.00
= 2.00 x 0.10 x 0.065 = 0.01300 cum
0.04043 cum
supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium
fixtures of 6 Nos. butt hinges (IS:205)150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts
(IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos.
rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including
labour charges for fixing the frame in position, fixing the shutter to the frame etc, including overheads &
contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall
be embedded in flooring for a depth of not less than 10 mm) (1800mm x 2100mm)
(BLD-CSTN-13-16)
Size : 1.80m x 2.10m 3.78 Sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 = 0.02743 cum
Outer frame - Horizontal 1 x 1.80
= 1.80 x 0.10 x 0.065= 0.01170 cum
0.03913 cum
30 mm thick flush shutter 2 x 0.85 x 2.05 = 3.485 sqm
Cost of medium TW frame 2 m to 3m length 0.0274 cum 84724.00 1 cum 2323.98
Cost of medium TW frame up to 2 m length 0.0117 cum 76251.00 1 cum 892.14
Cost of 30 mm thick flush shutter TBSC-L.II-05 3.485 sqm 1252.00 1 sqm 4363.22
Cost of Z hold fasts TBSC-P.IX-08 6 Nos. 34.00 Each 204.00
Cost of Alumimium tower bolt 200mm long TBSC- 2 Nos. 83.00 Each 166.00
P.I-09
Cost of Alumimium butt hinges 150mm long 6 Nos. 98.00 Each 588.00
TBSC-P.II-08
Cost of Alumimium aldrop 300mm long TBSC-P.IV- 1 No. 221.00 Each 221.00
06
Cost of Alumimium handle 150mm long TBSC- 2 Nos. 92.00 Each 184.00
P.III-04
Cost of Alumimium door stopper TBSC-P.IX-03 2 Nos. 61.00 Each 122.00
Cost of rubber bush TBSC-P.IX-04 2 Nos. 11.00 Each 22.00
Labour charges for frame work 0.03913 cum 14117.80 1 cum 552.43
Add for MA @ 20% 0.20 552.43 110.49
Labour charges for fixing flush door shutter to the 3.49 sqm 491.00 1 sqm 1711.14
frame, fixing the fixtures to the shutter TBSC-
T.I-25
Add for MA @ 20% 0.20 1711.14 342.23
Add for nails & screws etc.
Rate for 3.78 sqm 11802.61
Rate for 1 sqm 3122.38
Overheads & Contractors Profit @ 13.615% 0.13615 3122.38 425.11
Rate for 1 sqm 3547.50
Or Say 3547
shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI
marked Aluminium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2
Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door
stoppers and 2 Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and
nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame
of door shall be embedded in flooring for a depth of not less than 10 mm) (1500mm x 2100mm)
(BLD-CSTN-13-16)
Size : 1.50m x 2.10m 3.15 Sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.50
= 1.50 x 0.10 x 0.065 0.00975 cum
0.03718 cum
shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI
marked Aluminium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2
Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door
stoppers and 2 Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and
nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame
of door shall be embedded in flooring for a depth of not less than 10 mm) (1200mm x 2100mm).
(BLD-CSTN-13-16)
Size : 1.20m x 2.10m 2.52 Sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.20
= 1.20 x 0.10 x 0.065 0.00780 cum
0.03523 cum
fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of
3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200
mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush
including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for
fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete
for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for
a depth of not less than 10 mm)
(1000mm x 2100mm)
(BLD-CSTN-13-16)
Size : 1.00m x 2.10m 2.10 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.00
= 1.00 x 0.10 x 0.065 0.00650 cum
0.03393 cum
30 mm thick flush shutter 0.90 x 2.05 1.845 sqm
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.02743 cum 84724.00 1 cum 2323.98
Cost of medium TW frame up to 2 m length 0.00650 cum 76251.00 1 cum 495.63
Cost of 30 mm thick flush shutter TBSC-L.II-05 1.845 sqm 1252.00 1 sqm 2309.94
Cost of Z hold fasts TBSC-P.IX-08 6 Nos. 34.00 Each 204.00
Cost of Alumimium tower bolt 200mm long TBSC- 1 No. 83.00 Each 83.00
P.I-09
Cost of Alumimium butt hinges 150mm long 3 Nos. 98.00 Each 294.00
TBSC-P.II-08
Cost of Alumimium aldrop 300mm long TBSC-P.IV- 1 No. 221.00 Each 221.00
06
Cost of Alumimium handle 150mm long TBSC- 2 Nos. 92.00 Each 184.00
P.III-04
Cost of Alumimium door stopper TBSC-P.IX-03 1 No. 61.00 Each 61.00
Cost of rubber bush TBSC-P.IX-04 1 No. 11.00 Each 11.00
Labour charges for frame work 0.0339 cum 14117.80 1 cum 479.02
Add for MA @ 20% 0.20 479.02 95.80
Labour charges for fixing flush door shutter to the 1.845 sqm 491.00 1 sqm 905.90
frame, fixing the fixtures to the shutter TBSC-T.I-
25
Add for MA @ 20% 0.20 905.90 181.18
Add for nails & screws etc.
Rate for 2.10 sqm 7849.45
Overheads & Contractors Profit @ 13.615% 0.13615 7849.45 1068.70
8918.15
Rate for 1 sqm 4246.74
Or Say 4247
90 Supply & Fixing of Powder Coated Mild Steel doors, frames & shutters made of Skin pass galvanized Iron sheet
conforming to Base Steelas per IS 513 “D” Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams
/ Sq.Mtr with powder coating ofthickness60-65 Microns, frame with 1.2mm thick Skin pass Galvanized Iron sheet
formed to single rebate profile of size 100 mm X 58 mm and filled with in-fill Polyurethane foam, the Door
Shutters are with 0.80 mm thick Skin pass Galvanized Iron Sheet formed to provide a 46 mm thick fully flush,
double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and
coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of
thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished
with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and
durability, the Shutter provided with 6 MM clear floatvision glass in Circular, Square or Rectangular shapes,
Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm
thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc for industrial, commercial, residential, clean
room applications as per the design approved by the Engineer-in-Charge inside including labour charges for
fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete
for finished item of work.
91 Providing of Factory made prelaminated FPVC (Foamed Polyvinyl Chloride) Door frame of the size 105x40mm
with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos. of 50mm long
screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of
PVC fasteners of 3 no's to be provided for each vertical member, GI stiffeners of ("U" channel of size 29x9x1mm,
150mm long) -3 no's at hinge point, Frame reinforcement of("U" GI channel of size 46x22x.06mm),Bottom tie rod
of ("U" GI channel size of 15x15x1mm) etc. omplete as per manufacturers specification for finished item of work.
Maximum door frame size : 980 x 2070 including providing of 35mm thick Factory made Prelaminated ABS
(Acrolynitrile Butadyne Styrene) Door shutter moulded in different designs, consisting of all round Frame made
out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32x 32mm - 2 nos. for vertical made out of
LVL (Laminated Veneer Lumber), core material of 32 mm thick high density craft paper honey comb board,
sandwiched on both sides with prelaminated ABS sheet thickness of 1.5mm . PVC edge banding of size 0.45mm
on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos. for each shutter and ISI make
S.S round lock completes for finished item of work. Maximum shutter size of :910x2030mm as per the design
approved by the Engineer-in-Charge inside including labour charges for fixing the frame in position, fixing the
shutter to the frame etc., including overheads & contractors profit complete for finished item of work.
92 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI
marked flush door shutters of 35 mm thick single shutter with bond wood solid block board type Core having
cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory
made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including
cost and conveyance to site of teak wood frame, flush shutter including supply and
fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of
3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200
mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush
including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for
fixing the frame in position, fixing the shutter to the frame etc, including overheads & contractors profit complete
for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for
a depth of not less than 10 mm) (900mm x 2100mm).
(BLD-CSTN-13-16)
Size : 0.90m x 2.10m 1.89 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 0.90
= 0.90 x 0.10 x 0.065 0.00585 cum
0.03328 cum
35 mm thick flush shutter 0.80 x 2.05 1.64 sqm
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.02743 cum 84724.00 1 cum 2323.98
Cost of medium TW frame up to 2 m length 0.00585 cum 76251.00 1 cum 446.07
Cost of 35 mm thick flush shutter TBSC-L.II-05 1.64 sqm 1417.00 1 sqm 2323.88
Cost of Z hold fasts TBSC-P.IX-08 6 Nos. 34.00 Each 204.00
Cost of Alumimium tower bolt 200mm long TBSC- 1 No. 34.00 Each 34.00
P.I-08
Cost of Alumimium butt hinges 150mm long 3 Nos. 98.00 Each 294.00
TBSC-P.II-08
Cost of Alumimium aldrop 300mm long TBSC-P.IV- 1 No. 221.00 Each 221.00
06
Cost of Alumimium handle 150mm long TBSC- 2 Nos. 92.00 Each 184.00
P.III-04
Cost of Alumimium door stopper TBSC-P.IX-03 1 No. 61.00 Each 61.00
Cost of rubber bush TBSC-P.IX-04 1 No. 11.00 Each 11.00
Labour charges for frame work 0.03328 cum 14117.80 1 cum 469.84
Add for MA @ 20% 0.20 469.84 93.97
Cost of Alumimium aldrop 300mm long TBSC-P.IV- 1.64 sqm 491.00 1 sqm 805.24
06
Add for MA @ 20% 0.20 805.24 161.05
Add for nails & screws etc.
Rate for 1.89 sqm 7633.02
Overheads & Contractors Profit @ 13.615% 0.13615 7633.02 1039.24
93 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65mm and ISI
marked flush door shutter of 30mm thick single shutter with bond wood solid block board type Core having
cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory
made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including
cost and conveyance to site of medium teak wood door frame, flush shutter, including suply and fixing 6 Nos.
MS Z hold fasts of size 300mm x 40mm x 5mm including ISI marked Aluminium fixtures 3 Nos. butt hinges
(IS:205) of 150mm long, 1 No. aldrop (IS:2681) 250 mm long,
1 No. tower bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208),1 No. rubber bush
including supplying and fixing 1.20mm thick PVC sheet to full height of the shutter inside including labour
charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors
profit complete for finished item of work as per APSS 1001 & 1002. (The vertical frame of door shall be
embedded in flooring for deth of not less than 10mm) (800mm x 2100mm).
(BLD-CSTN-13-16)
Quantity analysis Size : 0.80m x 2.10m 1.68 sqm
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 0.80
= 0.80 x 0.10 x 0.065 0.00520 cum
0.03263 cum
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.02743 cum 84724.00 1 cum 2323.98
Cost of medium TW frame up to 2 m length 0.00520 cum 76251.00 1 cum 396.51
Cost of 30 mm thick flush shutter TBSC-L.II-05 1.435 sqm 1252.00 1 sqm 1796.62
Cost of Z hold fasts TBSC-P.IX-08 6 Nos. 34.00 Each 204.00
Cost of Aluminium tower bolt 150mm long TBSC- 1 No. 70.00 Each 70.00
P.I-08
Cost of Aluminium butt hinges 150mm longTBSC- 3 Nos. 98.00 Each 294.00
P.II-08
Cost of Aluminium aldrop 250mm long TBSC-P.IV- 1 No. 202.00 Each 202.00
05
Cost of Aluminium handle 125mm long TBSC-P.III- 1 No. 78.00 Each 78.00
03
Cost of rubber bush TBSC-P.IX-04 1 No. 11.00 Each 11.00
Cost of 1.20mm thick PVC sheet 1.435 sqm 170.00 1 sqm 243.95
Cost of Fevicol & labour charges for fixing PVC 1.435 sqm 80.00 1 sqm 114.80
sheet
Labour charges for frame work 0.0326 cum 14117.80 1 cum 460.66
Add for MA @ 20% 0.20 460.66 92.13
Labour charges for fixing flush door shutter to the 1.435 sqm 491.00 1 sqm 704.59
frame, fixing the fixtures to the shutter TBSC-T.I-
25
Add for MA @ 20% 0.20 704.59 140.92
Add for nails & screws etc.
Rate for 1.68 sqm 7133.15
Overheads & Contractors Profit @ 13.615% 0.13615 7133.15 971.18
8104.33
Rate for 1 sqm 4824.01
Or Say 4824
Rate as per SSR TBSC-L.III-22 1.00 Sqm 13438.00 1.00 Sqm 13438.00
Overheads & Contractors Profit @ 13.615% 0.13615 13438.00 1829.58
Rate for 1 Sqm 15267.58
Or Say 15268
95 Supply and fixing powder coated aluminium fully glazed swing door as per the approved drawing with
fixed fan light of 500mm height at top door using aluminium sections of 101.60 mmm x 44.45mm , 3.18 mm thick
for frame and door shutter made of styles , top and middle rail of 47.62mm x 44.45mm , 3.18 mm thick and
bottom rail of 114.30mm x 44.45 mm , 3.18mm thick,powder coating of alluminium sections 25mm microns thick,
5 mm thick plain float glass fitted with suitable aluminium glazing clips and rubber beading in fan light portion,
double shutters fitted with 5mm thick frosted / ground glass in the top half and 12mm thick prelaminated
particle board (One side choice colour and other side balancing white lamnation) in the bottom half fitted
with suitable aluminium glazing clips and rubber beading,shutters mounted on double action hydraulic floor
spring of approved brand manufacture IS : 6315 marked , Hardwyn make M-3000 for doors including cost of
cutting floors as required, embedding in floors
and SS cover plates with brass pivot and sigle piece MS Sheet outer box with slide plate etc.complete( Weight
Capacity up to 130 Kgs ) as approved by Engineer-in-Charge including supply and fixing ISI marked powder
coated aluminium fixtures of 4 Nos.tower bolts 10mm bolt (IS:204) 300mm long , 4 Nos.alluminium handles
(IS:208) 150mm dia and 2 Nos. aldrops (IS:2681) 300mm long including labour charges for manufacturing door ,
fixing the door with required No. of screws etc., including overheads & contractors profit complete for finished
item of work. (The Aluminium section used shall be standard make confirming to IS 1948 – 1961) and as
approved by the Engineer) (1800mm x 2600mm).
(BLD-CSTN-13-31)
Quantity analysis Size : 1.80m x 2.60m 4.68 sqm
Outer frame (101.60 x 44.45, 3.18mm thick) 2 x 1.80 + 2 x 2.60 8.80 RM
Mullions (101.60 x 44.45, 3.18mm thick) 1 x 0.50 0.50 RM
9.30 RM
= 9.30 RM @ 2.404 Kgs / RM 22.357 Kgs.
Shutters, styles and rails(47.62mm x 44.45mm , 4 x 2.10 + 2 x 2 x 0.90 12.00 RM
3.18 mm thick) = 12.00 RM @1.501 Kgs/ RM 18.012 Kgs.
Bottom rails (114.30 x 44.45. 3.18mm thick) 2 x 0.90 1.80 RM
= 1.80 RM @ 2.646 Kgs / RM 4.763 Kgs.
Glazing clips 2 x 2 x 2(0.90+0.50) +2 x 2 x 42.40 RM
2(0.90+1.20)
= 42.40 RM @+ 0.101
2 x 2 xKgs
2 /RM 4.282 Kgs.
49.414 Kgs.
5mm thick plain glass 2 x 0.90 x 0.50 0.90 sqm.
5mm thick ground glass 2 x 0.90 x 1.20 2.16 sqm.
12mm thick prelaminated paticle board 2 x 0.90 x 0.90 1.62 sqm.
Rubber beading 2 x 2(0.90+0.50)+2 x 2(0.90+1.20) = 14.00 RM
Cost analysis
A.Material :
Cost of powder coated Al. sections TBSC-R.I-03 49.414 Kgs. 307.00 1 Kgs. 15170.10
Cost of 5mm thick plain glass TBSC-F.I-02 0.90 sqm. 533.00 1 sqm. 479.70
5mm thick ground glass TBSC-F.IV-02 2.16 sqm. 712.00 1 sqm. 1537.92
12mm thick prelaminated paticle boardTBSC-H.III- 1.62 sqm. 823.00 1 sqm. 1333.26
48
Cost of rubber beading TBSC-R.I-11 14.00 RM 4.00 1 RM 56.00
Cost of floor springs TBSC-P.VII-03 2 Nos. 3674.00 Each 7348.00
Cost of Al. tower bolts 300mm TBSC-P.I-11 4 Nos. 115.00 Each 460.00
Cost of Al. round handles 150mm dia. 4 Nos. 100.00 Each 400.00
Cost of Al. aldrops 300mm TBSC-P.IV-06 2 Nos. 221.00 Each 442.00
B.Labour charges 4.68 sqm. 821.79 1 sqm. 3845.96
Add for Screws, Nails, Nuts, Bolts etc., LS
Rate per 4.68 Sqm: 31072.93
as required, embedding in floors and SS cover plates with brass pivot and sigle piece MS Sheet outer box with
slide plate etc.complete (Weight Capacity up to 130 Kgs) as approved by Engineer-in-Charge including supply
and fixing ISI marked powder coated aluminium fixtures of 4 Nos.tower bolts 10mm bolt (IS:204) 300mm long,
4 Nos. alluminium handles (IS:208) 150mm dia and 2 Nos. aldrops (IS:2681) 300mm long including labour
charges for manufacturing door, fixing the door with required No. of screws etc., including overheads &
contractors profit complete for finished item of work. (The Aluminium section used shall be standard make
confirming to IS 1948–1961) and as approved by the Engineer) (1500mm x 2600mm).
(BLD-CSTN-13-31)
Quantity analysis Size : 1.50m x 2.60m 3.90 sqm
Outer frame (101.60 x 44.45, 3.18mm thick) 2 x 1.50 + 2 x 2.60 = 8.20 RM
Mullions (101.60 x 44.45, 3.18mm thick) 1 x 0.50 = 0.50 RM
8.70 RM
= 8.70 RM @ 2.404 Kgs / RM 20.915 Kgs.
Shutters, styles and rails(47.62mm x 44.45mm , 4 x 2.10 + 2 x 2 x 0.75 = 11.40 RM
3.18 mm thick)
= 11.40 RM @1.501 Kgs/ RM 17.111 Kgs.
Bottom rails (114.30 x 44.45. 3.18mm thick) 2 x 0.75 = 1.50 RM
= 1.50 RM @ 2.646 Kgs / RM 3.969 Kgs.
Glazing clips 2 x 2 x 2(0.75+0.50) + 2 x 2 x RM
2(0.75+1.20)
= 38.80 RM @+ 0.101
2 x 2 xKgs
2(0.75+0.90)
/RM = 3.919 Kgs.
45.914 Kgs.
5mm thick plain glass 2 x 0.75 x 0.50 = 0.75 sqm.
5mm thick ground glass 2 x 0.75 x 1.20 = 1.80 sqm.
12mm thick prelaminated paticle board 2 x 0.75 x 0.90 = 1.35 sqm.
Rubber beading 2 x 2(0.75+0.50)+2 x 2 (0.75 + 1.20) 12.80 RM
Cost analysis =
A.Material :
Cost of powder coated Al. sections TBSC-R.I-03 45.91 Kgs. 307.00 1 Kgs. 14095.60
Cost of 5mm thick plain glass TBSC-F.I-02 0.75 sqm. 533.00 1 sqm. 399.75
5mm thick ground glass TBSC-F.IV-02 1.80 sqm. 712.00 1 sqm. 1281.60
12mm thick prelaminated paticle board TBSC-H.III- 1.35 sqm. 823.00 1 sqm. 1111.05
48
Cost of rubber beading TBSC-R.I-11 12.80 RM 4.00 1 RM 51.20
Cost of floor springs TBSC-P.VII-03 2 Nos. 3674.00 Each 7348.00
Cost of Al. tower bolts 300mm TBSC-P.I-11 4 Nos. 115.00 Each 460.00
Cost of Al. round handles 150mm dia. 4 Nos. 100.00 Each 400.00
Cost of Al. aldrops 300mm TBSC-P.IV-06 2 Nos. 221.00 Each 442.00
B.Labour charges 3.90 sqm. 821.79 1 sqm. 3204.96
Add for Screws, Nails, Nuts, Bolts etc., LS
Rate per 3.90 Sqm: 28794.16
Overheads & Contractors Profit @ 13.615% 0.13615 28794.16 3920.33
32714.49
Rate per 1 Sqm: 8388.33
Or Say 8388
97 Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel
(base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM) coated with
Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic
Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint
thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section
of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell
seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic
insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise
Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws
including overheads and contractor profit etc.,complete for finished item of work for Single leaf Door.
98 Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel
(base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM) coated with
Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic
Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint
thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section
of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell
seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic
insulation with 6” Tower bolt – 2 Nos., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 6 Nos, Mortise
Lock ofapproved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws
including overheads and contractor profit etc., complete for finished item of work for Double leaf Door.
99 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding doors with mesh shutter
– (2-glass shutters and 1-mesh shutter)- 95 - Series duly manufactured using UPVC reinforced profiles
(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for
every 100 parts of PVC resin) of (108 mm x 45 mm)/(95.50 mm x 60 mm) x 2.20 mm for outer frames, (75 mm x
39 mm)/(66 mm x 42mm) x 2.20 mm for sliding door shutter frames capable of mounting single glazing system,
structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated &
welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly
fixed with Grey colour TPV Gasket for sash & Glazing bead shall be coextruded with Grey colour soft PVC. Mesh
shutter shall be made of (48 mm x 30 mm))/(50 mm x 26.5mm) x 2.0 mm uPVC profile section and fitted with
Vinyl Coated Fiber mesh and rollers/pulley duly fixed with TPV Gaskets weathering seal resistant Door shall be
provided with standard hardware & multi point locking system of Patio/Roto espagulate and the system is to be
installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including
cost and conveyance of all materials, accessories, labour charges for transportation, erection at site including
overheads and contractors profit etc.,complete for finished item of work.
Rate as per SSR TBSC-L.III-10 1.00 Sqm 7048.00 1.00 Sqm 7048.00
Overheads & Contractors Profit @ 13.615% 0.13615 7048.00 959.59
Rate for 1 Sqm 8007.59
Or Say 8008
100 Supply and fixing of pre-painted steel top hung ventilators made of pre-painted steel as per IS 513 of-0.58
mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint & 4 mm pinhead glass for
ventilators with EPDM Gasket with handle made of high grade aluminium powder coated and nylon receiver,
corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the
concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6 pitch
complete for finished item of work including overheads & contractors profit etc., complete for finished item of
work
a Fixed louvers 2'-0 x 2'-0 (609.6 x 609.6mm) (Box section) outer frame section size of 33 x 56 mm and (ii)
Ventilators: Fixed louvers 4'-0 x 2'-0 (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56 mm
Mullion section size of 33 x 56 mm and (iii) Ventilators: Fixed louvers 4'-0 x 3'-0 (1219.2 x 914.4 mm) (Box
section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm
101 SSupplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track–2 Panel Sliding windows duly
manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of
TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (62mm x 60 mm)/(60 mm x 45
mm) x 2.20 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.20 mm for sliding shutter frames
capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of
minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be
fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash &
Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch
Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/
deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for
transportation, erection at site including overheads and contractors profit etc., complete for finished item of work.
102 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh
shutter – (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles
(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for
every 100 parts of PVC resin) of (94mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39
mm)/(54 mm x 38 mm) x 2.20mm for sliding shutter frames capable of mounting single glazing system
structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm
prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass
of reputed make and mesh shutter frame shall be (42 mm x 25mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl
Coated Fiber mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be
co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is
to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc.,
including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site
including overheads and contractors profit etc., complete for finished item of work
Rate as per SSR TBSC-M.II-11 1.00 Sqm 7119.00 1.00 Sqm 7119.00
Overheads & Contractors Profit @ 13.615% 0.13615 7119.00 969.25
Rate for 1 Sqm 8088.25
Say 8088
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) casement windows openable shutters
duly manufactured using UPVC reinforced profiles (Composition of profile shall consists aminimum of 5.5 PHR of
TiO2 and not more than 12PHR of CaCo3 for every 100 parts of PVC resin) of 60mm x 55 mm x 2.40 mm for
outer frames, 74 mm x 60mm x 2.40 mm for mullion sections for two or more openable shutters 75 mm x 60 mm
x 2.40 mm for openable shutter frame capable of mounting single glazing system structurally reinforced with hot
dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion
welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey
colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC and accessories for
casement window – friction hinges of stainless steel grade 304/430- 2 Nos., per sash, handle with zamak alloy
casting 1 No. per sash, multipoint locking system suitably concealed 1 No., per sash provided with raiser wedges
for smooth operation and the system is to be installed at the site using anchor fasteners, silicon rubber sealant,
easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges
for transportation, erection at site including overheads and contractor profit etc., complete for finished item of
work
Rate as per SSR TBSC-M.I-24 1.00 Sqm 7521.00 1.00 Sqm 7521.00
Overheads & Contractors Profit @ 13.615% 0.13615 7521.00 1023.98
Rate for 1 Sqm 8544.98
Or Say 8545
103 Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections
with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with
Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40
with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with
reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not
more than 12 PHR of CaCo3 for every 100 parts of PVC resin). Ventilator shall be provided with 4.5 mm Pin
Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm., including cost and
conveyance of all materials, accessories, labour charges for transportation, erection at site including overheads
and contractor profit etc., complete for finished item of work
Rate as per SSR TBSC-M.III-07 1.00 Sqm 6407.00 1.00 Sqm 6407.00
Overheads & Contractors Profit @ 13.615% 0.13615 6407.00 872.31
Rate for 1 Sqm 7279.31
Say 7279
104 Supplying and fixing of MS Grill to windows / in open court yards using 25mm x 6mm MS flat alround and
10mm MS square bars horizontally at 125mm centre to centre and vertically at 300mm centre to centre including
fixing with 4 Nos of MS Z holdfasts (2 on each side) duly making cutting brick masonry, fixing and making to
original surface neatly and painting grill with one coat of red oxide primer including cost all taxes and conveyance
of all materials including cutting, bending, welding including all operational charges and all labour charges etc.,
complete for finished item of work.
106 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) Fixed Glazing - 56 series duly manufactured
using UPVC reinforced profiles of 60 mm x 56 mm x 2.25 mm for outer frames and the mullion sections are of 60
mm x 70 mm x 2.25 mm frames are structurally reinforced with hot dip galvanized up to 50 microns of minimum
thickness of 1.2 mm the sash shall be fitted with 4 mm thick pinheaded glass of reputed make duly fixed with
EPDM weathering seal resistant including cost and conveyance of all materials, accessories, labour charges for
transportation, erection at site with templates for casement sizing scaffolding including overheads and contractor
profit etc., complete for finished item of work.
Rate as per SoR TBSC-N.I-04 1.00 Sqm 3756.00 1.00 Sqm 3756.00
Cost of 5mm thick plain glass TBSC-F.I-02 1.00 Sqm 533.00 1 Sqm -533.00
Cost of rubber beading TBSC-R.I-11 1.00 Sqm 315.00 1 Sqm 315.00
3538.00
Overheads & Contractors Profit @ 13.615% 0.13615 3538.00 481.70
Rate for 1 Sqm 4019.70
Or Say 4020
106 Supplying and fixing of two shutter cupboards as per drawing with medium teak wood frames of size 75mm x
40mm and MDF Board Interior grade both sides laminated 18mm thick for shutters with 18mm x 12mm teak
wood beading alround and supplying and fixing of SS fixtures 3 Nos. butt hinges (IS:12817) of size 100mm
long(for each shutter), tower bolt (IS:15833) 2 Nos. of 100mm x 10mm, 2 Nos of handles 100mm long, and
standard locking arrangements for shutters including cost and conveyance of all materials to site, labour
charges, over heads and contractor profit etc., complete for finished item of work.
1 Supplying and fixing of four shutters cupboards as per drawing with medium teak wood frames of size 75mm x
40mm section with 2 Nos styles and 3 Nos rails at top, bottom and Middle rails and shutters of MDF Board
Interior grade both sides laminated 18mm thick of 4Nos shutters size each of 0.987 x 0.7 m with 18mm x
12mm alround teak wood beading to each shutter including fixtures like Piano Hinges each shutter of length 4
Nos 0.987m Powder coated Mild steel as per IS-3818 : 1992 of nominal size 25mm (B) of thickness 0.8 to 1.0
mm, 2 no's Stainless Steel Tower Bolt-10 mm Bolt (IS:15833) 100 mm Long, 4 Nos of Stainless Steel Door
Handles 100 mm Long and standard cup board locks 2Nos, and magnets catche'rs 4Nos for shutters including
cost and conveyance of all materials to site, labour charges, over heads and contractor profit etc., complete for
finished item of work.
1 Supplying and fixing of six shutters cupboards as per drawing with medium teak wood frames of size 75mm x
40mm section with 3 Nos styles and 3 Nos rails at top, bottom and Middle rails and shutters of MDF Board
Interior grade both sides laminated 18mm thick of 6Nos shutters size each of 0.501 x 0.987 m with 18mm x
12mm alround teak wood beading to each shutter including fixtures like Piano Hinges each shutter of length 6
Nos 0.987m Powder coated Mild steel as per IS-3818 : 1992 of nominal size 25mm (B) of thickness 0.8 to 1.0
mm, 2 no's Stainless Steel Tower Bolt-10 mm Bolt(IS:15833) 100 mm Long, 6 Nos of Stainless Steel Door
Handles 100 mm Long and standard cup board locks 2Nos, and magnetscatchers 6Nos for shutters including
cost and conveyance of all materials to site, labour charges, over heads and contractor profit etc., complete for
finished item of work.
107 Supply and fixing of Main Door frame with best teak wood of size 250 x 150 mm of 1 horizontal of length 3.30m
and 2 verticals of length 2.70m, 2Nos shutter made out of 150mm x 50mm thick frame with provision for fixing of
10mm thick full glass, Shutters supported on heavy duty floor springs. Two sets of 1.0m long heavy bronze
handles are fixed.
(BLD-CSTN-13-16)
Size : 3.30m x 2.70m 8.91 sqm
Quantity analysis
Outer frame (1 x 3.3) + (2 x 2.70) = 8.7
= 8.7 x 0.25 x 0.15 0.32625 cum
Shutters (Planks) - 150x50mm (1.5x4) + (2.55x4) = 16.20 Rmt
= 16.2 x 0.15 x 0.05 0.48 cum
All round wood jamb to cover till wall thickness (3.3+2.70+2.70) = 7.20
front side
= 7.20x0.15x0.04 0.0432 cum
Rear side beading 75mmx 25mm thick (3.3+2.70+2.70) = 7.20
=7.2x0.075x0.025 = 0.0135 cum
0.86295 cum
Cost of 50mm thick Best teak wood Planks 0.86295 cum 173539.00 1 cum 149755.48
Cost of Brass Antique Ornamental Handles 2 sets 4 Pieces 17000.00 1 Each 68000.00
(4 pieces) - Quotation Rate
Providing of brass cast body Floor Spring IS: 6315 2 No. 12513.00 1 Each 25026.00
sleek in size with the S.S. / Brass Cover plates of
Length 320 mm x Breadth 130 mm size along with
the Top Patch, Bottom Patch, Door Lock and Pivot
with Double Cylinder etc. complete for Heavy duty
Glass doors.
Cost of Glass 10mm toughened glass (1.20m 5.4 Nos. 1653.00 1 Each 8926.20
x2.25mx 2 Nos = 5.40 Sqm)
LABOUR
Labour Charges for wrought and put up 0.86295 Cum 14117.80 1 Cum 12182.96
Labour charges for wrought and put up including 8.91 Sqm 1516.00 1 Sqm 13507.56
fixing in position for Teak wood Glazed and
panelled doors including fixing glass including
frame
Add 20% towards MA 20% 25690.52 5138.10
Labour charges for fixing of Floor Spring along with 2 Nos. 800.00 1 Nos 1600.00
top pivot & bottom pivot - As per Quotation
TOTAL: 284136.30
Overheads & Contractors Profit @ 13.615% 0.13615 284136.30 38685.16
322821.46
Rate for 1 sqm 36231.36
Say 36231
1 Supplying and laying, filling, jointing and testing SWG SP-1 pipe conforming to ISI 651 & 4127 with air
tight Cement joints in CM (1.5:1) prop. including excavation of trenches and socket pits in any soil (except rock
requiring blasting) and refilling with watering and tamping to the required slope including cost and conveyance
of all materials to site and all labour charges , overheads & contractor profit etc., complete for finished item of
work (APSS NO 1301 & 1318).
2 Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with
cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a
minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside
and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of
904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40
mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and
including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage
charges on all materials and all incidental and operational, labour charges like mixing cement mortar,
constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of
work as per Standard specification.
3 Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with
cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a
minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside
and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of
1524 mm (5'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40
mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and
including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage
charges on all materials and all incidental and operational, labour charges like mixing cement mortar,
constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of
work as per Standard specification.
4 Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber upto
914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg
including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage
charges on all materials and all incidental and operational, labour charges like mixing cement mortar,
constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of
work as per Standard specification.
5 Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with C.I
grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm
X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost and
conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished
item of work.
Supplying and fixing of 3" (75mm) Nahany trap with jali - UPVC/SWR pipe fittings as per site
requirements with standard
Rate as per SSR practice for all floors including cost and
TBSP-H.II-73 conveyance
1 No. 112.00of all materials
1 Each 112.00
Overheads & Contractors Profit @ 13.615% 0.13615 112.00 15.25
127.25
Rate per Each say 127
6 Supplying and fixing of 4" (101.6mm) multi floor trap with jali - UPVC/SWR pipe fittings as per site
requirements with standard practice for all floors including cost and conveyance of all materials to site, labour
charges , overheads & contractors profit etc., complete for finished item of work.
7 Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked
confirming to IS:2556-Part-3-1981 with "P" or "S" trap, ISI marked and providing masonry seat, CC squatting
plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak
wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-
charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded
conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber
union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to
stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed,
labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of
work.
4694.00
Overheads & Contractors Profit @ 13.615% 0.13615 4694.00 639.09
Add MA on labour charges for fixing Teak wood blocks 0.20 0.00 0.00
5311.00
Overheads & Contractors Profit @ 13.615% 0.13615 5311.00 723.09
6034.09
Rate per Each 6034
9 Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-
4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to
IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy
duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass
union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 30mm dia. PVC
flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour
charges , overheads & contractors profit for finished item of work.
30mm dia. PVC flexible waste pipe TBSP-H.II-04 1 No. 29.00 1 Each 29.00
2594.00
Overheads & Contractors Profit @ 13.615% 0.13615 2594.00 353.17
2947.17
Rate per Each say 2947
11 Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with
NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors
profit for finished item of work in all floors.
12 Supplying and fixing of 25.4mm dia, 609.6mm long aluminium anodized towel rods with brackets and
aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors
profit for finished item of work.
13 Supplying and fixing 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type
(full turn) with internal / external threaded connection conforming to IS 8931 as approved by the Engineer-In-
Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit
complete for finished item of work in all floors.
14 S&F of 15 mm brass body premium variety Chromium Plated finish bib tap angular shape with wall flange of
not less than 500 grams weight with quarter turn spindle with either internal or external threaded connection
conforming to IS 8931 and with 10 years warranty
Supplying and fixing 15 mm brass body CP finish self closing tap push type conforming to IS 1711 as
approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges, overheads
& contractors profit complete for finished item of work in all floors.
16 Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm.
and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site
requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and
conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of
work at all floor levels. (APSS No. 1302 1319 & 1326)
a) 75mm dia
Data for 6 RM
Cost of 75mm dia pipe TBSP-H.I-01 6.00 RM 278.00 3 RM 556.00
Cost of PVC clamps TBSP-H.II-59 3 Nos. 17.00 Each 51.00
Labour charges TBSP-H.IV-01 6.00 RM 88.00 1 RM 528.00
Add for MA @ 20% 0.20 528.00 105.60
1240.60
Rate per 1 RM 206.77
Overheads & Contractors Profit @ 13.615% 0.13615 206.77 28.15
234.92
say 235
b) 90mm dia
Data for 6 RM
Cost of 90mm dia pipe TBSP-H.I-02 6.00 RM 442.00 3 RM 884.00
Cost of PVC clamps TBSP-H.II-60 3 Nos. 19.00 Each 57.00
Labour charges TBSP-H.IV-01 6 RM 88.00 1 RM 528.00
Add for MA @ 20% 0.20 528.00 105.60
1574.60
Rate per 1 RM 262.43
Overheads & Contractors Profit @ 13.615% 0.13615 262.43 35.73
298.16
say 298
c) 110mm dia
Data for 6 RM
Cost of 110mm dia pipe TBSP-H.I-03 6.00 RM 527.00 3 RM 1054.00
Cost of PVC clamps TBSP-H.II-61 3 Nos. 20.00 Each 60.00
Labour charges TBSP-H.IV-01 6 RM 88.00 1 RM 528.00
Add for MA @ 20% 0.20 528.00 105.60
1747.60
Rate per 1 RM 291.27
Overheads & Contractors Profit @ 13.615% 0.13615 291.27 39.66
330.93
say 331
17 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to
meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and
cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing,
overheads & contractors profit complete for finished item of work at all floor levels.
b) 22.20mm OD pipe
Rate as per SoR TBSP-J.III-08 1 No. 193.00 Each 193.00
Overheads & Contractors Profit @ 13.615% 0.13615 193.00 26.28
Rate per 1 RM 219.28
say 219
d) 34.90mm OD pipe
Rate as per SoR TBSP-J.III-10 1 No. 315.00 Each 315.00
Overheads & Contractors Profit @ 13.615% 0.13615 315.00 42.89
Rate per 1 RM 357.89
say 358
e) 41.30mm OD pipe
Rate as per SoR TBSP-J.III-11 1 No. 391.00 Each 391.00
Overheads & Contractors Profit @ 13.615% 0.13615 391.00 53.23
Rate per 1 RM 444.23
say 444
f) 54.00mm OD pipe
Rate as per SoR TBSP-J.III-12 1 No. 569.00 Each 569.00
Overheads & Contractors Profit @ 13.615% 0.13615 569.00 77.47
Rate per 1 RM 646.47
say 646
18 Supplying and fixing 65 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 in
ground or on wall with GI fittings such as elbows tees couplings, nipples, plugs including excavation for
trenches and refilling the trenches ,chiselling masonry walls and making good the walls & floors to the original
surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour
charges , overheads & contractors profit complete for finished item of work except for GI bends union and GI
connectors with checkout and socket Tata or Zenith make or equivalent.
18 Supplying and fixing Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type
including cost and conveyance of all materials , labour charges , overheads & contractors profit complete for
finished item of work.
a) 20mm Nominal bore
Rate as per SSR TBSP-G.III-02 1 No. 873.00 Each 873.00
Overheads & Contractors Profit @ 13.615% 0.13615 873.00 118.86
991.86
Rate per Each say 992
19 Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer
approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for
inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and
conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of
work.
Supplying and fixing of stainless steel sink of size 508.00mm x 457.2mm x 203.20mm, 1mm thick of
Indian make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 30mm dia
PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making
good & restoring to original surfaces , overheads & contractors profit complete for finished item of work in all
floors
Rate as per SSR TBSP-E.VI-15 1 No 4680.00 Each 4680.00
Add for MA @ 20% 0.20 0.00 0.00
4680.00
Overheads & Contractors Profit @ 13.615% 0.13615 4680.00 637.18
5317.18
Rate per Each say 5317
20 Supplying & Fixing Indian make white glazed vitreous china porcelain sink conforming to IS:2556-Part-5-1994
on cantilever brackets with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel
pipe thread conforming to IS:2963-1979 : 750 x 450 x 250of Ist quality ncluding chiselling brick masonry wall
and making good & restoring to original surfaces overheads & contractors profit complete.for finished item of
work in all floors.
21 Manufacture, Supply and Delivery of Cast Carbon Steel rising / Non rising spindle sluice valve design standard
as per IS:14846/2000 for Water Supply Scheme with SS Spindle & SS Working parts the grade of Cast Steel
for body Bonnet, Dome, Stool Cover, Wedge, Stuffing Box, Gland Thrust Plate, shall be as per IS : 1030 /
1998. (The valve shall be used for High pressure schemes & pumping stations) excluding transportation etc.,
complete. ISI Marked Class-150 Body 425PSI Seat 300 PSI PN-20 80mm dia
23 Manufacture, Supply and Delivery of Cast Carbon Steel rising / Non rising spindle sluice valve design standard
as per IS:14846/2000 for Water Supply Scheme with SS Spindle & SS Working parts the grade of Cast Steel
for body Bonnet, Dome, Stool Cover, Wedge, Stuffing Box, Gland Thrust Plate, shall be as per IS : 1030 /
1998. (The valve shall be used for High pressure schemes & pumping stations) excluding transportation etc.,
complete. ISI Marked Class-150 Body 425PSI Seat 300 PSI PN-20 150mm dia
1 Manufacture, Supply and delivery of Cast Carbon Steel Bolted Cover Non Return Valve as per IS : 5312 / Part1
/2004. Round body heavy duty material spec. As per IS:1030/1998 with SS Hinge & Seat Rings. excluding
transportation etc., complete. 100mm dia (PN-20).
25 Manufacture, Supply and delivery of Cast Carbon Steel Bolted Cover Non Return Valve as per IS : 5312 / Part1
/2004. Round body heavy duty material spec. As per IS:1030/1998 with SS Hinge & Seat Rings. excluding
transportation etc., complete. Dia in mm. PN-20 150mm dia
Rate as per SSR Pg.no:520 1 No 22784.00 Each 22784.00
Add for MA @ 20% 0.20 0.00 0.00
22784.00
Overheads & Contractors Profit @ 13.615% 0.13615 22784.00 3102.04
25886.04
Rate per Each say 25886
26 Supplying and fixing of stainless steel sink of size 914.4 mm x457.2mm, 1mm thick of Indian make fixed
on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 30mm dia PVC flexible waste
pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to
original surfaces overheads & contractors profit complete.for finished item of work in all floors.
27 Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral
flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as
approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union
nuts CP coated, 12.70mm push cock 1st quality of approved make , 30mm dia PVC flexible waste pipe of
914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges ,
overheads & contractors profit complete for finished item of work for all floors.
TBSP-H.II-04 1462.60
Overheads & Contractors Profit @ 13.615% 0.13615 1462.60 199.13
1661.73
Rate per Each Say 1662
28 Manufacture, Supply and delivery of DI D/F Butterfly Valves with GGG-40/SG- 400/15 or GGG-50/SG-500/7 or
equivalent grade as per I.S.3896-part 2- 1985 and subsequent revisions, Double eccentrically Disc., with
renewable soft seal on the disc and Body seat face of stainless steel / nickel weld overlay, with powder or liquid
Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face
to face dimensions as per AWWA C 504 or BS 5155 or IS:13095. Drilled as per requirement of dept. PN 10
PN 16 dia 150 MM
Rate as per SSR 1 No. 78461.00 Each 78461.00
Overheads & Contractors Profit @ 13.615% 0.13615 78461.00 10682.47
89143.47
Rate per Each say 89143
100mm dia
Rate as per SSR 1 No. 17952.00 Each 17952.00
Overheads & Contractors Profit @ 13.615% 0.13615 17952.00 2444.16
20396.16
Rate per Each say 20396
Supplying and fixing white glazed flat back half stall urinals of size 590 mm x 375 mm x 390 mm with
integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995
as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber
union nuts CP coated, 12.70mm push cock 1st quality of approved make, 30mm dia PVC flexible waste pipe of
914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges etc.,
overheads & contractors profit complete for finished item of work for all floors.
30 Supplying and fixing of 101.60mm x 609.60mm white glazed porcelain channels 1st quality fixed in brick
masonry to the required slopes, white cement pointing including cost and conveyance of all materials and
labour charges, overheads & contractors profit complete for finished item of work for all floors.
31 Manufacture,Supply and delivery of the following sizes of RCC NP3 Pipes conforming to B.I.S. 458/2003 in
standard lengths with socket and spigot ends with suitable rubber rings including cost of all materials, rubber
rings, all taxes and duties and delivery to site, unloading, hoisting, carefully lowering in the readymade
trenches, laying true to alignment and gradient by using cranes, jointing with rubber rings and testing as per the
specifications including cost and conveyance of all materials to site, labour charges, all other incidental and
operational charges etc., complete For 300 mm Dia
32 Manufacture,Supply and delivery of the following sizes of RCC NP3 Pipes conforming to B.I.S. 458/2003 in
standard lengths with socket and spigot ends with suitable rubber rings including cost of all materials, rubber
rings, all taxes and duties and delivery to site, unloading, hoisting, carefully lowering in the readymade
trenches, laying true to alignment and gradient by using cranes, jointing with rubber rings and testing as per the
specifications including cost and conveyance of all materials to site, labour charges, all other incidental and
operational charges etc., complete For 450 mm Dia
33 Construction of brick masonry support for GI pipe of size 304.80mm x 228.60mm x 228.60 mm in CM
(1:8) prop including plastering and finishing with 12mm thick in CM (1:5) including cost and conveyance of all
materials and all labour charges, overheads & contractors profit complete for finished item of work for all floors.
34 Supply and fixing or Ashrivad /Ajay/ Astral Flowgaurd or equivalent UPVC pipes and fittings SCH 40 to meet
the requirement including cost and convayance of all materials to site, labour charges for fixing etc., complete
for finished item of work at all floors.
Supply and laying of HDPE pipe of PE 100 confirming to IS 4984 - 1995 to resist the pressure of 8 kg/ sq cm
including cost and conveyance of all material to site, labour charges for fixing etc., complete for finished item of
35 work at all floor levels SSR page no.486 16. S o R FOR H.D.P.E PIPES FOR THE YEAR 2016-17. (PE - 100
Grade)
a 50 mm Dia OD @ 8 kg/Sqcm
MATERIAL
Manufacture, Supply, & Delivery of HDPE Pipes 1.000 RMT 81 1 Rmt 81.00
conforming to IS 4984 - 1995 including transportation to
any where in T.G, excluding excise duty, sale tax and
specials etc., complete. (supply upto 90 mm diain coil &
above 90 mm diastraight length in 6 m.)
LABOUR
Laying and jointing of HDPE pipes in ready made trench 1.000 RMT 38 1 Rmt 38.00
by butt fusion welding as per IS:7634 – part-II/1975 as
amended from time to time to the alignment and
gradient and testing the pipeline to the required pressure
b 63 mm Dia OD @ 8 kg/Sqcm
MATERIAL
Manufacture, Supply, & Delivery of HDPE Pipes 1.000 RMT 125 1 Rmt 125.00
conforming to IS 4984 - 1995 including transportation to
any where in T.G, excluding excise duty, sale tax and
specials etc., complete. (supply upto 90 mm diain coil &
above 90 mm diastraight length in 6 m.)
LABOUR
Laying and jointing of HDPE pipes in ready made trench 1.000 RMT 42 1 Rmt 42.00
by butt fusion welding as per IS:7634 – part-II/1975 as
amended from time to time to the alignment and
gradient and testing the pipeline to the required pressure
Supply and laying of HDPE pipe of PE 100 confirming to IS 4984 - 1995 to resist the pressure of 8 kg/ sq cm
36 including cost and conveyance of all material to site, labour charges for fixing etc., complete for finished item of
work at all floor levels.
a 75 mm Dia OD @ 8 kg/Sqcm
MATERIAL
Manufacture, Supply, & Delivery of HDPE Pipes 1.000 RMT 177 1.00 Rmt 177.00
conforming to IS 4984 - 1995 including transportation to
any where in T.G, excluding excise duty, sale tax and
specials etc., complete. (supply upto 90 mm diain coil &
above 90 mm diastraight length in 6 m.) - 63 mm
LABOUR
Laying and jointing of HDPE pipes in ready made trench 1.000 RMT 46 1.00 Rmt 46.00
by butt fusion welding as per IS:7634 – part-II/1975 as
amended from time to time to the alignment and
gradient and testing the pipeline to the required pressure
Supplying and fixing Ceramic Lab Sink 450x 300 x 150mm deep with waste fittings like rubber plug, chain, 32
mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with swan next
pillar cock complete,1 No.15mm PVC connection with brass union nuts CP coated , 15 mm brass angle stop
valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS
37 8931, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and
conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work
Cost of Ceramic Lab Sink 600x400x250 deep 1 No. 8115.00 1 Each 8,115.00
Long body bib cock TBSP-F.II-03 1 No. 763.00 1 Each 763.00
15 mm nominal size PVC connection 1 No. 103.00 1 Each 103.00
with brass union nut C.P coated TBSP-J.I-32,
15 mm nominal size CP finish brass angled stop valve 1 No. 236.00 1 Each 236.00
screw type,
30mm nominal size fia PVC flexible waste pipe TBSP- 1 No. 26.00 1 Each 26.00
H.II-04,
Labour charges only for fixing Vitreous china porcelain 1 No. 383.00 1 Each 383.00
sinks with waste fittings, rubber plug, chain, cantilever
brackets etc.
Labour charges for Long body bib cock 1 No. 93.00 1 Each 93.00
Labour charges for 15 mm nominal size CP finish brass 1 No. 93.00 1 Each 93.00
angled stop
Add for MA @ 20% 0.200 569.00 113.80
Total 9,925.80
Overheads & Contractors Profit @ 13.615% 13.615% 1810.80 246.54
10,172.34
Rate per Each say 10,173.00
Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC
conforming to IS:2556 (Part 8)-2004 suit with 'P' ' trap with dual flush porcelain cistern fixed on wash down
EWC with all internal parts of dual flush cistern, ultra-solid seat cover of approved make with rubber buffer and
cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make
1 etc.including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for
finished item of work for all floors:White Colour
Cost of EWC white colour CASCADE model- TBSP-E.II- 1 No 11075.00 1 Each 11075.00
04
Add MA on labour charges for fixing EWC TBSP-E.VIII- 0.200 330.00 66.00
06
11141.00
Overheads & Contractors Profit @ 13.615% 13.615% 11141.00 1516.85
12657.85
Rate per Each 12658
1 Supply and fixing of UPVC Pipes and Fittings SCH-40 Grade to meet the requirement of ASTM-D 2846 for
hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for
fixing, overheads & contractors profit complete for finished item of work at all floor levels.
a) 65mm OD pipe
Market rate 1 No. 710.00 Each 710.00
Overheads & Contractors Profit @ 13.615% 13.615% 710.00 96.67
Rate per 1 RM 806.67
say 807
b) 80mm OD pipe
Market rate 1 No. 850.00 Each 850.00
Overheads & Contractors Profit @ 13.615% 13.615% 850.00 115.73
Rate per 1 RM 965.73
say 966
c) 100mm OD pipe
Market rate 1 No. 925.00 Each 925.00
Overheads & Contractors Profit @ 13.615% 0.13615 925.00 125.94
Rate per 1 RM 1050.94
say 1051
d) 150mm OD pipe
Market rate 1 No. 1250.00 Each 1250.00
Overheads & Contractors Profit @ 13.615% 13.615% 1250.00 170.19
Rate per 1 RM 1420.19
say 1420
EXTERNAL DRAINAGE
Rate in
S.No. Description Quantity Unit Amount
Rs.
1 Earth work excavation for foundations (Mechanical Means) 624.00 Cum 119.00 74256.00
for buildings in ordinary soils and depositing on bank for all
lifts and with an initial lead of 10m and up to 3m depth
including all operational, incidental, labour charges such as
shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work
excluding dewatering charges etc., as per SS 20 B(APSS
308).
2 Plain Cement Concrete (1:4:8) (cement: fine aggregate: 21.00 Cum 3785.00 79485.00
Coarse aggregate) for foundations using coarse aggregate
40mm size hard , machine crushed granite from approved
quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, sand, coarse aggregate, water etc. to site including
all charges for machine mixing and hire charges of concrete
mixer, laying concrete in foundations and under flooring bed,
ramming in 15 cm layers finishing top surface to the required
level curing etc.,and overheads & contractors profit
complete for finished item of work. (APSS No. 402)
5 Filling with useful available excavated earth by manual 682.00 Cum 197.00 134354.00
means (excluding rock) in trenches, sides of foundations and
basement with initial lead in layers not exceeding 15 cm
thick, consolidating each deposited layer by watering and
ramming including cost and conveyance of water to work site
and all operational, incidental, labour charges, hire charges
of T & P etc., and overheads & contractors profit complete
for finished item of work. (APSS NO. 309 & 310)
6 Constructing 904.0 mm (3’0”) dia brick masonry inspection Err:509 EACH 14212.00 Err:509
chamber as per IS - 4111: Part-1:1986 with cement mortar
(1:6) prop using 2nd Class Clay Bricks of 225 mm thick from
approved source having a minimum crushing strength of 5
N/sq.mm including plastering with cement mortar 1:3 prop;
½” thick both inside and outside fitted with 20” dia RCC
manhole covers and frames including excavating pits up to a
depth of 1524 mm (5'-0") in all sorts of soils (exculding rock)
and laying cement conrete (1:4:8) 150 mm thick using 40
mm HBG Metal and P.C.C. 1:2:4 benching and channel 100
mm thick as per Standard specification and including cost
and conveyance of all materials like cement, sand, bricks,
water etc., to site, cost of seigniorage charges on all
materials and all incidental and operational, labour charges
like mixing cement mortar, constructing masonry, lift
charges, curing , overheads & contractors profit etc.,
complete for finished item of work as per Standard
specification.
Err:509
Err:509
0
EXTERNAL WATERSUPPLY
Rate in
S.No. Description Quantity Unit Amount
Rs.
1 Earth work excavation for foundations (Manual Means) of buildings, septic tank, 631.00 Cum 243.00 153333.00
sump, compound wall in ordinary soils and depositing on bank with an initial lead
of 10m and depth up to 3m including all operational,incidental, labour charges
such as shoring, sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering charges etc., as
per SS 20 B(APSS 308)
2 Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for 31.00 Cum 3785.00 117335.00
foundations using coarse aggregate 40mm size hard , machine crushed granite
from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity
including cost and conveyance of all materials like cement, sand, coarse
aggregate, water etc. to site including all charges for machine mixing and hire
charges of concrete mixer, laying concrete in foundations and under flooring bed,
ramming in 15 cm layers finishing top surface to the required level curing etc.,and
overheads & contractors profit complete for finished item of work. (APSS No.
402)
3 Supply and laying of HDPE pipe of PE 100 confirming to IS 4984 - 1995 to resist 452.00 RM 517.00 233684.00
the pressure of 8 kg/ sq cm including cost and conveyance of all material to site,
labour charges for fixing etc., complete for finished item of work at all floor levels.
for 110 mm Dia
4 Supply and laying of HDPE pipe of PE 100 confirming to IS 4984 - 1995 to resist 0.00 RM 358.00 0.00
the pressure of 8 kg/ sq cm including cost and conveyance of all material to site,
labour charges for fixing etc., complete for finished item of work at all floor levels
for 90 mm Dia
5 Supply and laying of HDPE pipe of PE 100 confirming to IS 4984 - 1995 to resist 596.00 RM 264.00 157344.00
the pressure of 8 kg/ sq cm including cost and conveyance of all material to site,
labour charges for fixing etc., complete for finished item of work at all floor levels
for 75mm Dia
6 Supply and fixing or Ashrivad /Ajay/ Astral Flowgaurd or equivalent UPVC pipes 200.00 RM 1028.00 205600.00
and fittings SCH 40 to meet the requirement including cost and convayance of
all materials to site, labour charges for fixing etc., complete for finished item of
work at all floors 65mm dia.
6 Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine 11.00 CUM 5096.00 56056.00
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry including cost and conveyance of all
materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site,
including sales & other taxes on all materials and including all charges for mixing,
laying concrete in position, curing etc., & lift charges , and overheads &
contractors profi
7 Filling with useful available excavated earth (excluding rock) with a lead of 50 m 35.00 Cum 197.00 6895.00
in trenches, sides of foundations and basement with initial lead in layers not
exceeding 15cm thick, watering and ramming including cost and conveyance of
water to work site and all operaitonal, incidental, labour charges, hire charges of
T&P etc., and overheads & contractors profit complete for fnished item of work.
8 Manufacture, Supply and Delivery of Cast Carbon Steel rising / Non rising spindle 2.00 EACH 20396.00 40792.00
sluice valve design standard as per IS:14846/2000 for Water Supply Scheme
with SS Spindle & SS Working parts the grade of Cast Steel for body Bonnet,
Dome, Stool Cover, Wedge, Stuffing Box, Gland Thrust Plate, shall be as per IS :
1030 / 1998. (The valve shall be used for High pressure schemes & pumping
stations) excluding transportation etc., complete. ISI Marked for 100mm dia
(Class-150 Body 425PSI Seat 300 PSI PN-20).
9 Manufacture, Supply and delivery of Cast Carbon Steel Bolted Cover Non Return 4.00 EACH 18823.00 75292.00
Valve as per IS : 5312 / Part1 /2004. Round body heavy duty material spec. As
per IS:1030/1998 with SS Hinge & Seat Rings. excluding transportation etc.,
complete. 100mm dia (PN-20).
1046331.00
1046331.00
0
D A T A (SoR 2021-22)
CEMENT MORTAR PER CUM 720 Kg 480 Kg 360 Kg 288 Kg 240 Kg 180 Kg
CM (1:2) CM (1:3) CM (1:4) CM (1:5) CM (1:6) CM (1:8)
Cost of Sand for mortar & Plastering 840.00 840.00 840.00 840.00 840.00 840.00
(1.05 cum)
Cost of cement 4032.00 2688.00 2016.00 1612.80 1344.00 1008.00
Mazdoor (Unskilled ) for mixing mortar 98.00 98.00 98.00 98.00 98.00 98.00
( 0.20 Nos.)
Add for MA @ 20% 19.60 19.60 19.60 19.60 19.60 19.60
Rate per Cum 4989.60 3645.60 2973.60 2570.40 2301.60 1965.60
1 Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable
materials
a) Brick with 100m lead as directed by Executive Engineer duly taking actual premeasurements before
masonry
(BLD-CSTN-14-9/299)
Mazdoor(unskilled) 0.409 Nos. 490.00 1 Each 200.41
Add for MA @ 20% 0.20 200.41 40.08
Rate per 1 cum 240.49
Overheads & Contractors Profit @ 13.615%
0.13615 240.49 32.74
Rate per 1 cum Total Rs. 273.23
Rate per 1 cum Or Say 273.00
c) Clean removal of lime plaster from walls and raking out joints 20mm deep or from terraced roof and
raking
Rate asout
perjoints 100 mm deep
SSR TBSC-U.I-14 10.00 sqm 6.00 1 sqm 60.00
m) Clean removal of cement plaster from walls and raking out joint 20 mm deep
Rate as per SSR TBSC-U.I-15
10.00 sqm 7.00 1 sqm
70.00
Add for MA @ 20% 0.20 70.00 14.00
Rate per 10 sqm 84.00
Rate per 1 sqm 8.40
2 Dismantling doors, windows and clear storey windows, Ventilators etc., (wood or steel) shutters including
Chowkhats, architraves,hold fasts and other attachments etc., and stacking them within 100m lead including
(BLD-CSTN-14-11)
a) Not exceeding 3 sqm in area :
Details of cost per each :
2nd class mason 0.10 Nos. 515.00 1 No. 51.50
Mazdoor(Male) 0.20 Nos. 490.00 1 No. 98.00
2nd class Blacksmith 0.05 Nos. 515.00 1 No. 25.75
Add for MA @ 20% 0.20 175.25 35.05
210.30
Overheads & Contractors Profit @ 13.615% 0.13615 210.30 28.63
1 Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in
ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS
308)
(BLD-CSTN-2-1)
Ordinary Soil - Manual Means up to 3m depth
Unit : 1 cum
Taking output : 10.00 Cum
a) Labour
Mazdoor ( Unskilled) 3.64 Nos. 490.00 1 No. 1783.60
Add for MA @ 20% 0.20 1783.60 356.72
b&c) 2140.32
Overheads & Contractors Profit @ 13.615% 0.13615 2140.32 291.40
Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump,
compound
(BLD-CSTN-2-1&wall inCOM-LDLFT-6-66)
ordinary soils and depositing on bank with an initial lead of 10m and 1m
Rate with initial lead & lift 1.00 cum 243.17 1 cum 243.17
Mazdoor for extra lift ( 1 No. for 60m) 0.02 Nos. 490.00 1 Each 9.80
Add for MA @ 20% 0.20 9.80 1.96
Overheads & Contractors Profit @ 13.615% 0.13615 11.76 1.60
2 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing
on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational, incidental,
labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for
finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308).
(BLKD-CSTN-2-2)
Ordinary Soil - Mechanical Means up to 3m depth
3 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing
on bank for all lifts and with an initial lead of 10m and 3m to 6m depth including all operational,incidental,
labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete
for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
(BLKD-CSTN-2-3)
Ordinary Soil - Mechanical Means up to 3m to 6m depth
Unit : 1 cum
Taking output : 210.00 Cum
a) Labour
Mazdoor ( Unskilled) 8.32 Nos. 490.00 1 No. 4076.80
Add for MA @ 20% 0.20 4076.80 815.36
b) Machinery
Shovel 0.85 cum 110hp (Part I (I&CAD 6.00 hours 3033.50 1 Hour 18201.00
Works))
Crew charges (Part I (I&CAD Works)) 6.00 hours 297.70 1 Hour 1786.20
Add MA on crew charges 0.20 1786.20 357.24
c&d) 25236.60
Overheads & Contractors Profit @ 13.615% 0.13615 25236.60 3435.96
Earth work excavation for foundations (Manual Means) of buildings in ordinary rock (not
requiring blasting) and depositing on bank with an initial lead of 10m and depth up to 3m
including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc.,
(BLD-CSTN-2-4)
and overheads & contractors profit complete for finished item of work excluding dewatering charges
Ordinary rock(not
etc., as per requiring
SS 20 B(APSS blasting) - Manual Means up to 3m depth
308)
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
Mazdoor ( Unskilled) 5.20 Nos. 490.00 1 No. 2548.00
Add for MA @ 20% 0.20 2548.00 509.60
(b & c) 3057.60
Overheads & Contractors Profit @ 13.615% 0.13615 3057.60 416.29
4 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary rock (not requiring
blasting) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all
(BLKD-CSTN-2-5)
Ordinary rock (not requiring blasting)- Mechanical Means up to 3m depth
Unit : 1 cum
Taking output : 180.00 Cum
a) Labour
Mazdoor ( Unskilled) 6.24 Nos. 490.00 1 No. 3057.60
Add for MA @ 20% 0.20 3057.60 611.52
b) Machinery
5 Earth work excavation for foundations for buildings in hard rock (requiring blasting) and
depositing on bank Hard
(BLKD-CSTN-2-6) for allrock
lifts (requiring
and with an initial lead
blasting)- up toof3m
10m and up to 3m depth including all
depth
Unit : 1 cum
Taking output : 10.00 Cum
a) Labour
Driller ( Part I (I&CAD Works) P.15 (I - 0.50 Nos. 570.00 1 No. 285.00
23)
Blaster ( Part I (I&CAD Works) P.14 (I - 0.25 Nos. 645.00 1 No. 161.25
3)
Mazdoor ( Unskilled) 8.35 Nos. 490.00 1 No. 4091.50
Add for MA @ 20% 0.20 4537.75 907.55
b) Machinery
Air compressor 7cmm (diesel) 1.00 hour 1366.90 1 Hour 1366.90
Jack hammer/Pneumatic braker 2.00 hours 20.80 1 Hour 41.60
Crew charges
Air compressor(Part I(I&CAD Works)P.14 1.00 Hours 270.80 1 Hour 270.80
(3))
Jack hammer/Pneumatic braker 2.00 Hours 423.20 1 Hour 846.40
Add MA on crew charges 0.20 1117.20 223.44
c)Material
Gelatin 80% ( M - 104 ) 3.50 Kgs 73.00 1 Kg 255.50
Detonator electric 14 Nos. 11.00 1 No. 154.00
c&d) 8603.94
Overheads & Contractors Profit @ 13.615% 0.13615 8603.94 1171.43
5 Earth work excavation for foundations for buildings in hard rock (blasting prohibited) and depositing on
bank for all lifts and with
(BLKD-CSTN-2-7) Hardanrock
initial lead of prohibited)-
(blasting 10m and upup to to
3m3mdepth
depthincluding all operational,incidental, labour
Unit : 1 cum
Taking output : 10.00 Cum
a) Labour
Mazdoor ( Unskilled) 5.20 Nos. 490.00 1 No. 2548.00
Add for MA @ 20% 0.20 2548.00 509.60
b) Machinery
Air compressor 6.00 Hours 1366.90 1 Hour 8201.40
Jack hammer/Pneumatic braker 12.00 Hours 20.80 1 Hour 249.60
Crew charges
Air compressor 6.00 Hours 270.80 1 Hour 1624.80
Jack hammer/Pneumatic braker 12.00 Hours 423.20 1 Hour 5078.40
Add MA on crew charges 0.20 6703.20 1340.64
c&d) 19552.44
Overheads & Contractors Profit @ 13.615%
0.13615 19552.44 2662.06
Cost for 10 cum ( a+b+c+d) 22214.50
Rate per 1 cum (a+b+c+d) / 10 Total Rs. 2221.45
Rate per 1 cum Or Say 2221.00
3 Conveyance of un-useful excavated earth to a distance of 5 KM for disposal including hire charges of T & P,
labour charges etc., and overheads & contractors profit complete for finished item of work.
Rate as per SoR 1 cum 107.80 1 cum 107.80
Total Rs. 107.80
Rate per 1 cum Or Say 108.00
172.69
Say 173.00
Filling with carted coarse sand in trenches,sides of foundations and basement with initial lead in
layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to
work site and all peraitonal,incidental ,labour charges,hire charges of T&P etc., and overheads &
contractors profit complete for fnished item of work (APSS NO.309&310)
5 Filling with carted gravel by manual means in trenches, sides of foundations and basement with initial lead in
layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and
conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., and
overheads & contractors profit complete for fnished item of work. (APSS NO. 309 & 310)
(BLD-CSTN-2-9)
& Amendments/Modifications in
SoR 2021-22
Unit : 1 cum
Ordinary Soils (either excavated or
carted) - MANUAL MEANS
Taking output = 10 cum
a Material :
Gravel (RMR Rate) 10.00 cum 98.00 1 cum 980.00
a) Labour
Mate (Crowbar man / Jumper man) 0.20 Nos. 515.00 1 No. 103.00
Mazdoor ( Unskilled ) 2.50 Nos. 490.00 1 No. 1225.00
Bhisti 0.20 Nos. 515.00 1 No. 103.00
Add for MA @ 20% 0.20 1431.00 286.20
Water charges @ 1% 0.01 2697.20 26.97
Rate per 10 cum 2724.17
Overheads & Contractors Profit @ 13.615% 0.13615 2724.17 370.90
(BLD-CSTN-2-9)
& Amendments/Modifications in
SoR 2021-22
Unit : 1 cum
Ordinary Soils (either excavated or
carted) - MANUAL MEANS
Taking output : 10.00 Cum
a) Material :
Ordinary soils 10.00 cum 1 cum 0.00
b) Labour
Mate (Crowbar man / Jumper man) 0.20 Nos. 515.00 1 No. 103.00
Mazdoor ( Unskilled ) 2.50 Nos. 490.00 1 No. 1225.00
Bhisti 0.20 Nos. 515.00 1 No. 103.00
Add for MA @ 20% 0.20 1431.00 286.20
1717.20
Water charges @ 1% 0.01 1717.20 17.17
Rate per 10 cum 1734.37
1970.51
Rate per 1 cum Total Rs. 197.05
Or Say 197.00
7 Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under
flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry
including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including
sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations
and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and
overheads & contractors profit complete for finished item of work. (APSS No. 402).
(BLD-CSTN-3-5)
Unit : 1 cum
A.MATERIALS :
Cement 162.00 Kgs 5600.00 1000 Kgs 907.20
Coarse aggregate 40mm 0.90 Cum 701.25 1 Cum 631.13
Fine aggregate ( Sand ) 0.45 Cum 600.00 1 Cum 270.00
Water (including curing) 1.20 kl 98.00 1 kl 117.60
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) 1.00 hour 180.80 1 hour 180.80
capacity
Crew charges 1.00 hour 284.70 1 hour 284.70
Add MA on crew charges 0.20 284.70 56.94
C.LABOUR :
1st class mason 0.10 Nos. 545.00 1 Each 54.50
Mazdoor (unskilled) 1.39 Nos. 490.00 1 Each 681.10
Add for MA @ 20% 0.20 735.60 147.12
3331.09
Overheads & Contractors Profit @ 13.615% 0.13615 3331.09 453.53
8 Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) for foundations and under
flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry
including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, sales &
other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and
under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc.,and overheads
& contractors profit complete for finished item of work. (APSS No. 402).
(BLD-CSTN-3-7)
Unit : 1 cum
A.MATERIALS :
9 Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard other than
granite stones carted
( BLD-CSTN-6-13 ) from approved quarry including cost and conveyance of all materials like
Unit = 1 cum
A.MATERIALS
Cement 59.40 Kgs 5600.00 1000 Kgs 332.64
Rough stone (OTG) 1.10 Cum 152.00 1 Cum 167.20
Fine aggregate(sand) 0.33 Cum 800.00 1 Cum 264.00
B) LABOUR
1st class mason 1.20 Nos. 545.00 1 Each 654.00
Mazdoor (unskilled) 2.00 Nos. 490.00 1 Each 980.00
Add for MA @ 20% 0.20 1634.00 326.80
2724.64
Add water charges 0.01 2724.64 27.25
2751.89
Overheads & Contractors Profit @ 13.615% 0.13615 2751.89 374.67
Rate per 1 cum Total Rs. 3126.56
Or Say 3127.00
10 Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard granite
stones carted from approved quarry including cost and conveyance of all materials like cement,
screened sand, water, stones etc., from approved quarry, to site, sales & other taxes on all materials
including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction,
curing etc.,and overheads & contractors profit complete for finished item of work in foundation and
basement. (APSS No. 601 & 615)
( BLD-CSTN-6-13 )
Unit = 1 cum
A.MATERIALS
Cement 59.40 Kgs 5600.00 1000 Kgs 332.64
Rough stone (HBG) 1.10 Cum 239.00 1 Cum 262.90
Fine aggregate(sand) 0.33 Cum 800.00 1 Cum 264.00
B) LABOUR
1st class mason 1.20 Nos. 545.00 1 Each 654.00
Mazdoor (unskilled) 2.00 Nos. 490.00 1 Each 980.00
Add for MA @ 20% 0.20 1634.00 326.80
2820.34
Add water charges 0.01 2820.34 28.20
2848.54
Overheads & Contractors Profit @ 13.615% 0.13615 2848.54
387.83
Rate per 1 cum Total Rs. 3236.37
Or Say 3236.00
10 Plain Cement Concrete (1:3:6) nominal mix using 40mm size machine crushed hard granite metal (coarse
aggregate) in (2:1) ratio from approved quarry including cost and conveyance of all materials like cement, fine
aggregate (sand), coarse aggregate, water etc. to site, sales & other taxes on all materials, all charges for mixing,
laying concrete in position, curing charges, overheads & contractors profit etc., for finished item of work for
footings and basement.
(BLD-CSTN-3-14)
FOUNDATIONS , PLINTH , PEDESTALS ( Below Plinth)
A.MATERIALS :
Cement 380.00 Kgs 5600.00 1000 Kgs 2128.00
20mm HBG graded metal 0.80 Cum 1055.26 1 Cum 844.21
Sand 0.40 Cum 600.00 1 Cum 240.00
B.LABOUR :
1st class Mason 0.133 Nos 545.00 1 Each 72.49
2nd class Mason 0.267 Nos 515.00 1 Each 137.51
Mazdoor (both men&women) 4.60 Nos 490.00 1 Each 2254.00
Add for MA @ 20% 0.20 2463.99 492.80
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 249.00 1 hour 331.92
Crew charges 1.333 hours 426.70 1 hour 568.79
Needle vibrator 40mm ( petrol ) 1.333 hours 32.60 1 hour 43.46
Crew charges 1.333 hours 204.90 1 hour 273.13
Add MA on crew charges 0.20 841.92 168.38
Water(including for curing) 1.20 kl 98.00 1 kl 117.60
Rate per 1 cum 7672.28
a Footings
Rate for Design mix M 25 1.00 Cum 7672.28 1 Cum 7672.28
Hire charges of centering and scaffolding 1.00 Cum 304.00 1 Cum 304.00
Labour charges 1.00 Cum 718.00 1 Cum 718.00
Add for MA @ 20% 0.20 718.00 143.60
8837.88
Overheads & Contractors Profit @ 13.615% 0.13615 8837.88 1203.28
b Column pedestals
Rate for Design mix M 25 1.00 Cum 7672.28 1 Cum 7672.28
Hire charges of centering and scaffolding 1.00 Cum 346.00 1 Cum 346.00
Labour charges (SoR Pg 116) 1.00 Cum 1141.00 1 Cum 1141.00
Add for MA @ 20% 0.20 1141.00 228.20
9387.48
Overheads & Contractors Profit @ 13.615% 0.13615 9387.48 1278.10
c Plinth Beams
Rate for Design mix M 25 1.00 Cum 7672.28 1 Cum 7672.28
Hire charges of centering and scaffolding 1.00 Cum 1467.00 1 Cum 1467.00
Labour charges (SoR Pg 116) 1.00 Cum 1730.00 1 Cum 1730.00
Add for MA @ 20% 0.20 1730.00 346.00
11215.28
Overheads & Contractors Profit @ 13.615% 0.13615 11215.28 1526.96
1 Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with minimum cement
content of 400 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved
quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water
etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers,
Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as
weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but
excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402).
(BLD-CSTN-3-14)
FOUNDATIONS , PLINTH , PEDESTALS ( Below Plinth)
A.MATERIALS :
Cement 400.00 Kgs 5600.00 1000 Kgs 2240.00
20mm HBG graded metal 0.80 Cum 1055.26 1 Cum 844.21
Sand 0.40 Cum 600.00 1 Cum 240.00
B.LABOUR :
1st class Mason 0.133 Nos 545.00 1 Each 72.49
2nd class Mason 0.267 Nos 515.00 1 Each 137.51
Mazdoor (both men&women) 4.60 Nos 490.00 1 Each 2254.00
Add for MA @ 20% 0.20 2463.99 492.80
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 249.00 1 hour 331.92
Crew charges 1.333 hours 426.70 1 hour 568.79
Needle vibrator 40mm ( petrol ) 1.333 hours 32.60 1 hour 43.46
Crew charges 1.333 hours 204.90 1 hour 273.13
Add MA on crew charges 0.20 841.92 168.38
Water(including for curing) 1.20 kl 98.00 1 kl 117.60
Rate per 1 cum 7784.28
a Footings
Rate for Design mix M 25 1.00 Cum 7784.28 1 Cum 7784.28
Hire charges of centering and scaffolding 1.00 Cum 304.00 1 Cum 304.00
Labour charges 1.00 Cum 718.00 1 Cum 718.00
Add for MA @ 20% 0.20 718.00 143.60
8949.88
Overheads & Contractors Profit @ 13.615% 0.13615 8949.88 1218.53
(BLD-CSTN-3-15)
COLUMNS, LINTELS, WATER TANKS, RCC WALL IN BUILDINGS:
A.MATERIALS :
Cement 400.00 Kgs 5600.00 1000 Kgs 2240.00
20mm HBG graded metal 0.80 Cum 1055.26 1 Cum 844.21
Sand 0.40 Cum 600.00 1 Cum 240.00
B.LABOUR :
1st class Mason 0.167 Nos 545.00 1 Each 91.02
2nd class Mason 0.167 Nos 515.00 1 Each 86.01
Mazdoor (both men&women) 5.60 Nos 490.00 1 Each 2744.00
Add for MA @ 20% 0.20 2921.02 584.20
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 249.00 1 hour 331.92
Crew charges 1.333 hours 426.70 1 hour 568.79
Needle vibrator 40mm ( petrol ) 1.333 hours 32.60 1 hour 43.46
Crew charges 1.333 hours 204.90 1 hour 273.13
Add MA on crew charges 0.20 841.92 168.38
Water(including for curing) 1.20 kl 98.00 1 kl 117.60
Rate per 1 cum 8332.71
COLUMNS :
a) un supported height up to 3.66 m
FF (GF) SF TF
(i) Lifting by Manual means
Rate for other Floors
Rate as above 8332.71 8332.71 8332.71
Hire charges of centering and scaffolding 250.00 250.00 250.00
Labour charges (SoR Pg 119) 1965.00 2162.00 2358.00
Add for MA @ 20% 393.00 432.40 471.60
Lift charges of materials (Manual) 0.00 292.10 584.20
Add for MA @ 20% 0.00 58.42 116.84
Rate per 1 cum 10940.71 11527.63 12113.36
Overheads & Contractors Profit @ 13.615% 1489.58 1569.49 1649.23
(BLD-CSTN-3-15)
COLUMNS, LINTELS, WATER TANKS, RCC WALL IN BUILDINGS:
A.MATERIALS :
Cement 380.00 Kgs 5600.00 1000 Kgs 2128.00
20mm HBG graded metal 0.80 Cum 1055.26 1 Cum 844.21
Sand 0.40 Cum 600.00 1 Cum 240.00
B.LABOUR :
1st class Mason 0.167 Nos 545.00 1 Each 91.02
2nd class Mason 0.167 Nos 515.00 1 Each 86.01
Mazdoor (both men&women) 5.60 Nos 490.00 1 Each 2744.00
Add for MA @ 20% 0.20 2921.02 584.20
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 249.00 1 hour 331.92
Crew charges 1.333 hours 426.70 1 hour 568.79
Needle vibrator 40mm ( petrol ) 1.333 hours 32.60 1 hour 43.46
Crew charges 1.333 hours 204.90 1 hour 273.13
Add MA on crew charges 0.20 841.92 168.38
Water(including for curing) 1.20 kl 98.00 1 kl 117.60
Rate per 1 cum 8220.71
COLUMNS :
a) un supported height up to 3.66 m
FF (GF) SF TF 4F 5F 6F
(i) Lifting by Manual means
Rate for other Floors
Rate as above 8220.71 8220.71 8220.71 8220.71 8220.71 8220.71
Hire charges of centering and scaffolding 250.00 250.00 250.00 250.00 250.00 250.00
Labour charges (SoR Pg 119) 1965.00 2162.00 2358.00 2555.00 2751.00 2948.00
Add for MA @ 20% 393.00 432.40 471.60 511.00 550.20 589.60
Lift charges of materials (Manual) 0.00 292.10 584.20 876.31 1168.41 1460.51
Add for MA @ 20% 0.00 58.42 116.84 175.26 233.68 292.10
Rate per 1 cum 10828.71 11415.63 12001.36 12588.28 13174.00 13760.92
Overheads & Contractors Profit @ 13.615% 1474.33 1554.24 1633.98 1713.89 1793.64 1873.55
Crew charges (Part I (I&CAD Works) SoR 0.00 451.22 496.34 541.46 586.59 631.71
Pg 35)
Add for MA @ 20% 0.00 90.24 99.27 108.29 117.32 126.34
Rate per 1 cum 10828.71 12068.46 12404.00 12740.73 13076.27 13413.00
Overheads & Contractors Profit @ 13.615% 1474.33 1643.12 1688.80 1734.65 1780.33 1826.18
(BLD-CSTN-3-15)
COLUMNS, LINTELS, WATER TANKS, RCC WALL IN BUILDINGS:
A.MATERIALS :
Cement 380.00 Kgs 5600.00 1000 Kgs 2128.00
20mm HBG graded metal 0.80 Cum 1055.26 1 Cum 844.21
Sand 0.40 Cum 600.00 1 Cum 240.00
B.LABOUR :
1st class Mason 0.167 Nos 545.00 1 Each 91.02
2nd class Mason 0.167 Nos 515.00 1 Each 86.01
Mazdoor (both men&women) 5.60 Nos 490.00 1 Each 2744.00
Add for MA @ 20% 0.20 2921.02 584.20
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 249.00 1 hour 331.92
Crew charges 1.333 hours 426.70 1 hour 568.79
Needle vibrator 40mm ( petrol ) 1.333 hours 32.60 1 hour 43.46
Crew charges 1.333 hours 204.90 1 hour 273.13
Add MA on crew charges 0.20 841.92 168.38
Water(including for curing) 1.20 kl 98.00 1 kl 117.60
Rate per 1 cum 8220.71
COLUMNS :
a) un supported height up to 3.66 m
FF (GF) SF TF 4F 5F 6F
(i) Lifting by Manual means
Rate for other Floors
Rate as above 8220.71 8220.71 8220.71 8220.71 8220.71 8220.71
Hire charges of centering and scaffolding 375.00 375.00 375.00 375.00 375.00 375.00
Labour charges (SoR Pg 119) 2578.00 2836.00 3094.00 3351.00 3609.00 3867.00
Add for MA @ 20% 515.60 567.20 618.80 670.20 721.80 773.40
Lift charges of materials (Manual) 0.00 292.10 584.20 876.31 1168.41 1460.51
Add for MA @ 20% 0.00 58.42 116.84 175.26 233.68 292.10
Rate per 1 cum 11689.31 12349.43 13009.56 13668.48 14328.60 14988.72
Overheads & Contractors Profit @ 13.615% 1591.50 1681.38 1771.25 1860.96 1950.84 2040.71
Crew charges (Part I (I&CAD Works) SoR 0.00 451.22 496.34 541.46 586.59 631.71
Pg 35)
Add for MA @ 20% 0.00 90.24 99.27 108.29 117.32 126.34
Rate per 1 cum 11689.31 13002.26 13412.20 13820.93 14230.87 14640.80
Overheads & Contractors Profit @ 13.615% 1591.50 1770.26 1826.07 1881.72 1937.53 1993.34
12 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement
content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved
quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water
etc., to site and sales & other taxes on all materials, Steel scaffolding pipes, jack Props, Steel Centering
Plates,etc.,., including all operational, incidental and labour charges such as weigh batching, machine mixing,
lifting of concrete mechanically, laying concrete, curing , overheads & contractors profit etc., complete but
excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
(BLD-CSTN-3-15)
COLUMNS, LINTELS, WATER TANKS, RCC WALL IN BUILDINGS:
A.MATERIALS :
Cement 380.00 Kgs 5600.00 1000 Kgs 2128.00
20mm HBG graded metal 0.80 Cum 1055.26 1 Cum 844.21
Sand 0.40 Cum 600.00 1 Cum 240.00
B.LABOUR :
1st class Mason 0.167 Nos 545.00 1 Each 91.02
2nd class Mason 0.167 Nos 515.00 1 Each 86.01
Mazdoor (both men&women) 5.60 Nos 490.00 1 Each 2744.00
Add for MA @ 20% 0.20 2921.02 584.20
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 249.00 1 hour 331.92
Crew charges 1.333 hours 426.70 1 hour 568.79
Needle vibrator 40mm ( petrol ) 1.333 hours 32.60 1 hour 43.46
Crew charges 1.333 hours 204.90 1 hour 273.13
Add MA on crew charges 0.20 841.92 168.38
Water(including for curing) 1.20 kl 98.00 1 kl 117.60
Rate per 1 cum 8220.71
13 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement
content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to
site and sales & other taxes on all materials, centering using Casurina Ballies, Bamboos, Wooden Reapers,
Runners, Wood Posts, Steel Plates etc., including all operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
a) LINTELS :
(i) Lifting by Manual means FF (G.F) SF TF 4F 5F 6F
Rate for other Floors
Rate as above 8220.71 8220.71 8220.71 8220.71 8220.71 8220.71
Hire charges of centering and scaffolding 831.00 831.00 831.00 831.00 831.00 831.00
Labour charges 1399.00 1539.00 1679.00 1819.00 1959.00 2099.00
Add for MA @ 20% 279.80 307.80 335.80 363.80 391.80 419.80
Lift charges of materials (Manual) 0.00 292.10 584.20 876.31 1168.41 1460.51
Add for MA @ 20% 0.00 58.42 116.84 175.26 233.68 292.10
Rate per 1 cum 10730.51 11249.03 11767.56 12286.08 12804.60 13323.12
Overheads & Contractors Profit @ 13.615% 1460.96 1531.56 1602.15 1672.75 1743.35 1813.94
LINTELS : 7F 8F 9F
Rate as above 8220.71 8220.71 8220.71
Hire charges of centering and scaffolding 831.00 831.00 831.00
Labour charges 2238.00 2378.00 2518.00
Add for MA @ 20% 447.60 475.60 503.60
Lift charges of materials (Manual) 1752.61 2044.71 2336.82
Add for MA @ 20% 350.52 408.94 467.36
Rate per 1 cum 13840.44 14358.97 14877.49
Overheads & Contractors Profit @ 13.615% 1884.38 1954.97 2025.57
7F 8F 9F
Rate as above 1233.11 1233.11 1233.11
Hire charges of centering and scaffolding 1149.00 1149.00 1149.00
Lift charges of materials (Winch 35HP 103.92 110.85 117.78
Electric)
Crew charges 101.52 108.29 115.06
Add for MA @ 20% 20.30 21.66 23.01
Rate per 10 sqm 2607.86 2622.91 2637.96
Overheads & Contractors Profit @ 13.615%
355.06 357.11 359.16
Rate per 1 sqm 2962.92 2980.02 2997.12
Or Say 2963 2980 2997
14 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement
content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine
crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved
quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water
etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, Steel
Centering Plates,etc., including all operational, incidental and labour charges such as weigh batching, machine
mixing, lifting of concrete mechanically, laying concrete, curing, overheads & contractors profit etc., complete but
excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402).
(BLD-CSTN-3-16)
RCC SLABS, BEAMS :
A.MATERIALS :
Cement 380.00 Kgs 5600.00 1000 Kgs 2128.00
20mm HBG graded metal 0.80 Cum 1055.26 1 Cum 844.21
Sand 0.40 Cum 600.00 1 Cum 240.00
B.LABOUR :
1st class Mason 0.067 Nos 545.00 1 Each 36.52
2nd class Mason 0.133 Nos 515.00 1 Each 68.50
Mazdoor (both Men & Women) 3.077 Nos 490.00 1 Each 1507.73
Add for MA @ 20% 0.20 1612.74 322.55
C.MACHINERY :
Batching plant 0.50 cum 0.308 hours 249.00 1 hour 76.69
Crew charges 0.308 hours 426.70 1 hour 131.42
Needle vibrator 40mm ( petrol ) 0.308 hours 32.60 1 hour 10.04
Crew charges 0.308 hours 204.90 1 hour 63.11
Add MA on crew charges 0.20 194.53 38.91
Water(including for curing) 1.20 kl 98.00 1 kl 117.60
Rate per 1 cum 5585.27
7F 8F 9F
Rate as above 837.79 837.79 837.79
Hire charges of centering and scaffolding 290.48 290.48 290.48
Lift charges for scaffolding 457.31 486.47 514.47
Add for MA @ 20% 91.46 97.29 102.89
Lift charges of materials 20.82 22.20 23.59
(Winch 35HP Electric)
Crew charges 20.34 21.69 23.05
Add for MA @ 20% 4.07 4.34 4.61
Rate per 1 sqm 1722.26 1760.27 1796.89
Overheads & Contractors Profit @ 13.615% 234.49 239.66 244.65
(BLD-CSTN-3-16)
A.MATERIALS :
12mm HBG graded metal 0.80 Cum 946.25 1 Cum 757.00
Sand 0.40 Cum 600.00 1 Cum 240.00
Cement 380.00 Kgs 5600.00 1000 Kgs 2128.00
Water ( including for curing ) 1.20 Kl 98.00 1 Kl 117.60
B.MACHINERY :
Batching plant 0.50 cum 0.308 hour 249.00 1 hour 76.69
Crew charges 0.308 hour 426.70 1 hour 131.42
Needle vibrator 40mm ( petrol ) 0.308 hours 32.60 1 hour 10.04
Crew charges 0.308 hours 204.90 1 hour 63.11
Add MA on crew charges 0.20 194.53 38.91
C.LABOUR :
1st class mason 0.067 Nos. 545.00 1 Each 36.52
2nd class mason 0.133 Nos. 515.00 1 Each 68.50
Mazdoor (Unskilled) 3.077 Nos. 490.00 1 Each 1507.73
Add for MA @ 20% 0.20 1612.74 322.55
Rate per 1 cum 5498.06
16 Ornamental borders by providing 20 mm thick raised bands of 300 mm wide in plain cement mortor bands in
CM(1:4) 360 Kg including cost and conveyence of all materials, labour charges and scaffolding s etc., curing,
overheads & contractors profit etc., complete for finished item of work.
(BLD-CSTN-8-17)
Unit : 10sqm
A.MATERIALS :
Cement mortar 1:4 0.0230 Cum 2973.60 1 Cum 68.39
B. LABOUR
Mason 1st class 0.30 Nos. 545.00 1 Each 163.50
Mazdoor (unskiled) 0.35 Nos. 490.00 1 Each 171.50
Add for MA @ 20% 0.20 335.00 67.00
Add water charges 1% 0.01 470.39 4.70
Rate per 10 Sqm 475.10
Overheads & Contractors Profit @ 13.615% 0.13615 475.10 64.68
17 Ornamental borders by providing 20 mm thick raised bands of 230 mm wide in plain cement mortor bands in
CM(1:4) 360 Kg ,including cost and conveyence of all materials, labour charges and scaffolding s etc., curing,
overheads & contractors profit etc., complete for finished item of work.
Cost for 1 metres long and 23 cm wide 124.15
band
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement
content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine
crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved
quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water
etc., to site and sales & other taxes on all materials, centering using Casurina Ballies, Bamboos, Wooden
Reapers, Runners, Wood Posts, Wall Plates etc., including all operational, incidental and labour charges such as
weigh batching, machine mixing, lifting of concrete manually / mechanically, laying concrete, curing, overheads &
(BLD-CSTN-3-16)
contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work
RCC SLABS,
(APSS BEAMS :
No. 402).
A.MATERIALS :
Cement 380.00 Kgs 5600.00 1000 Kgs 2128.00
20mm HBG graded metal 0.80 Cum 1055.26 1 Cum 844.21
Sand 0.40 Cum 600.00 1 Cum 240.00
B.LABOUR :
1st class Mason 0.067 Nos 545.00 1 Each 36.52
2nd class Mason 0.133 Nos 515.00 1 Each 68.50
Mazdoor (both Men & Women) 3.077 Nos 490.00 1 Each 1507.73
Add for MA @ 20% 0.20 1612.74 322.55
C.MACHINERY :
Batching plant 0.50 cum 0.308 hours 249.00 1 hour 76.69
Crew charges 0.308 hours 426.70 1 hour 131.42
Needle vibrator 40mm ( petrol ) 0.308 hours 32.60 1 hour 10.04
Crew charges 0.308 hours 204.90 1 hour 63.11
Add MA on crew charges 0.20 194.53 38.91
Water(including for curing) 1.20 kl 98.00 1 kl 117.60
Rate per 1 cum 5585.27
a) BEAMS :
un supported height up to 3.66m
(i) Lifting by Manual means
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as above 5585.27 5585.27 5585.27 5585.27 5585.27 5585.27
Hire charges of centering and scaffolding 1467.00 1467.00 1467.00 1467.00 1467.00 1467.00
Labour , lift charges for scaffolding 1648.00 1813.00 1978.00 2142.00 2307.00 2472.00
Add for MA @ 20% 329.60 362.60 395.60 428.40 461.40 494.40
Lift charges of materials (Manual) 0.00 161.27 322.55 483.82 645.10 806.37
Add for MA @ 20% 0.00 32.25 64.51 96.76 129.02 161.27
Rate for 1 cum 9029.87 9421.40 9812.93 10203.25 10594.78 10986.31
Overheads & Contractors Profit @ 13.615% 1229.42 1282.72 1336.03 1389.17 1442.48 1495.79
RCC SLABS :
Roof Slabs 115mm thick : un supported
a) height up to 3.66 m
Rate for Design mix M 25 0.115 Cum 5585.27 1 Cum 642.31
(BLD-CSTN-3-16)
RCC SLABS, BEAMS :
A.MATERIALS :
Cement 400.00 Kgs 5600.00 1000 Kgs 2240.00
20mm HBG graded metal 0.80 Cum 1055.26 1 Cum 844.21
Sand 0.40 Cum 600.00 1 Cum 240.00
B.LABOUR :
1st class Mason 0.067 Nos 545.00 1 Each 36.52
a) BEAMS :
un supported height up to 3.66m
(i) Lifting by Manual means
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as above 5585.27 5585.27 5585.27 5585.27 5585.27 5585.27
Hire charges of centering and scaffolding 1467.00 1467.00 1467.00 1467.00 1467.00 1467.00
Labour , lift charges for scaffolding 1648.00 1813.00 1978.00 2142.00 2307.00 2472.00
Add for MA @ 20% 329.60 362.60 395.60 428.40 461.40 494.40
Lift charges of materials (Manual) 0.00 161.27 322.55 483.82 645.10 806.37
Add for MA @ 20% 0.00 32.25 64.51 96.76 129.02 161.27
Rate for 1 cum 9029.87 9421.40 9812.93 10203.25 10594.78 10986.31
Overheads & Contractors Profit @ 13.615% 1229.42 1282.72 1336.03 1389.17 1442.48 1495.79
(BLD-CSTN-3-16)
RCC SLABS, BEAMS :
A.MATERIALS :
Cement 380.00 Kgs 5600.00 1000 Kgs 2128.00
20mm HBG graded metal 0.80 Cum 1055.26 1 Cum 844.21
Sand 0.40 Cum 600.00 1 Cum 240.00
B.LABOUR :
1st class Mason 0.067 Nos 545.00 1 Each 36.52
2nd class Mason 0.133 Nos 515.00 1 Each 68.50
Mazdoor (both Men & Women) 3.077 Nos 490.00 1 Each 1507.73
Add for MA @ 20% 0.20 1612.74 322.55
C.MACHINERY :
Batching plant 0.50 cum 0.308 hours 249.00 1 hour 76.69
Crew charges 0.308 hours 426.70 1 hour 131.42
Needle vibrator 40mm ( petrol ) 0.308 hours 32.60 1 hour 10.04
Crew charges 0.308 hours 204.90 1 hour 63.11
Add MA on crew charges 0.20 194.53 38.91
Water(including for curing) 1.20 kl 98.00 1 kl 117.60
Rate per 1 cum 5585.27
a) BEAMS :
un supported height up to 3.66m
(i) Lifting by Manual means
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as above 5585.27 5585.27 5585.27 5585.27 5585.27 5585.27
Hire charges of centering and scaffolding 1467.00 1467.00 1467.00 1467.00 1467.00 1467.00
Labour , lift charges for scaffolding 1648.00 1813.00 1978.00 2142.00 2307.00 2472.00
Add for MA @ 20% 329.60 362.60 395.60 428.40 461.40 494.40
Lift charges of materials (Manual) 0.00 161.27 322.55 483.82 645.10 806.37
Add for MA @ 20% 0.00 32.25 64.51 96.76 129.02 161.27
Rate for 1 cum 9029.87 9421.40 9812.93 10203.25 10594.78 10986.31
Overheads & Contractors Profit @ 13.615% 1229.42 1282.72 1336.03 1389.17 1442.48 1495.79
RCC SLABS :
Roof Slabs 115mm thick : un supported
a) height up to 3.66 m
Rate for Design mix M 25 0.115 Cum 5585.27 1 Cum 642.31
1 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum
cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size
graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all
materials , centering using Casurina Ballies , Bamboos , Wooden Reapers , Runners , Wood Posts ,
Wall Plates etc., for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end
with an average thickness of 6.25cm including all operational, incidental and labour charges such as
(BLD-CSTN-3-16)
weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing, overheads &
A.MATERIALS
contractors profit: complete etc., but excluding cost of steel and its fabrication charges for finished
item of work.
Cement 380.00 Kgs 5600.00 1000 Kgs 2128.00
(APSS
20mm HBGNo. 402,
graded 403metal
& 903) 0.80 Cum 1055.26 1 Cum 844.21
Sand 0.40 Cum 600.00 1 Cum 240.00
B.LABOUR :
1st class Mason 0.067 Nos 545.00 1 Each 36.52
2nd class Mason 0.133 Nos 515.00 1 Each 68.50
Mazdoor (both men&women) 3.077 Nos 490.00 1 Each 1507.73
Add for MA @ 20% 0.20 1612.74 322.55
20 Brick masonry for panel walls 340mm thick in superstructure with CM (1:8) prop: (Cement : Screened
sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional
size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost
and conveyance of all materials like cement, screened sand, bricks, water etc., to site, including sales & other
taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing
masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS
No. 501 & 504).
(BLD-CSTN-5-5)
Unit : 1cum
A.MATERIALS :
Cement 36.00 Kgs 5600.00 1000 Kgs 201.60
Common burnt clay bricks 23x11x7cms 512 Nos 7076.57 1000 Nos 3623.20
Fine aggregate ( Sand ) 0.20 Cum. 800.00 1 Cum. 160.00
B.LABOUR :
1st class mason 0.24 Nos. 545.00 1 Each 130.80
2nd class mason 0.56 Nos. 515.00 1 Each 288.40
Mazdoor (Unskilled) 1.89 Nos. 490.00 1 Each 926.10
Add for MA @ 20% 0.20 1345.30 269.06
water charges @ 1% 0.01 5599.16 55.99
Rate per 1 cum 5655.16
Hire charges for Access Scaffolding 1.00 Cum 31.94 1.00 sqm 31.94
Labour charges for scaffolding 1.00 Cum 260.59 1.00 sqm 260.59
Add for MA @ 20% 0.20 260.59 52.12
5999.80
Overheads & Contractors Profit @ 13.615% 0.13615 5999.80
816.87
Rate per 1 cum 6816.68
Or Say Say 6817.00
21 Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement : Screened sand)
using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or
traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40
Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water
etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing
cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads &
contractors profit complete for finished item of work. (APSS No. 501 & 504).
(BLD-CSTN-5-5)
Unit : 1cum
A.MATERIALS :
Cement 36.00 Kgs 5600.00 1000 Kgs 201.60
Common burnt clay bricks 23x11x7cms 512 Nos 7076.57 1000 Nos 3623.20
Fine aggregate ( Sand ) 0.20 cu.m. 800.00 1 cu.m. 160.00
B.LABOUR :
1st class mason 0.24 Nos. 545.00 1 Each 130.80
2nd class mason 0.56 Nos. 515.00 1 Each 288.40
a) Up to basement
Rate as worked out above 1.00 Cum 5655.16 1 Cum 5655.16
Overheads & Contractors Profit @ 13.615%
0.13615 5655.16 769.95
Rate per 1 cum 6425.10
Or Say Say 6425.00
b) Superstructure :
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as worked out above 5655.16 5655.16 5655.16 5655.16 5655.16 5655.16
Hire charges for Access Scaffolding 47.22 47.22 47.22 47.22 47.22 47.22
Labour charges for scaffolding 385.22 554.17 723.17 892.17 1061.13 1230.13
Add for MA @ 20% 77.04 110.83 144.63 178.43 212.23 246.03
Lift charges ( Page 131 of Std. Data ) 0.00 134.53 269.06 403.59 538.12 672.65
Add for MA @ 20% 0.00 26.91 53.81 80.72 107.62 134.53
Rate per 1 cum 6164.64 6528.81 6893.05 7257.28 7621.47 7985.71
Overheads & Contractors Profit @ 13.615% 839.32 888.9 938.49 988.08 1037.66 1087.25
22 Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop. (Cement :
Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non-
Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing
strength of 40 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends
of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and
conveyance of all materials like cement, steel, sand, bricks, water etc., to site, including sales & other
taxes on all materials, all operational, incidental charges such as labour charges for mixing cement
mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads &
contractors profit but excluding cost of steel and its fabrication charges complete for finished item of
(BLD-CSTN-5-12)
work.
Unit - 10sqm No. of 501 & 509).
(APSS
A.MATERIALS :
Common burnt clay bricks 23x11x7cms 512 Nos. 7076.57 1000 Nos. 3623.20
Cement 72.00 Kgs 5600.00 1000 Kgs 403.20
Fine aggregate ( Sand ) 0.20 cu.m. 800.00 1 cu.m. 160.00
B.LABOUR :
1st class mason 0.60 Nos. 545.00 1 Each 327.00
2nd class mason 0.60 Nos. 515.00 1 Each 309.00
Mazdoor (Unskilled) 2.75 Nos. 490.00 1 Each 1347.50
Add for MA @ 20% 0.20 1983.50 396.70
water charges @ 1% 0.01 6566.60 65.67
Rate per 10 sqm 6632.27
Rate per 1 sqm 663.23
(BLD-CSTN-5-17)
Unit = 1 Cum
A.MATERIALS
No of blocks required for 110 Nos 26000.00 1000 Nos 2860.00
1 Cum of Masonry
Cement 24.00 Kgs 5600.00 1000 Kgs 134.40
Fine aggregate ( Sand ) 0.10 cu.m. 800.00 1 cu.m. 80.00
B .LABOUR
Mason 1st class 0.42 Nos. 545.00 1 Each 228.90
Mason 2nd class 0.92 Nos. 515.00 1 Each 473.80
Man Mazdoor 0.70 Nos. 490.00 1 Each 343.00
Woman Mazdoor 2.10 Nos. 490.00 1 Each 1029.00
Add for MA @ 20% 0.20 2074.70 414.94
water charges @ 1% 0.01 5564.04 55.64
Rate per 1 cum 5619.68
22 Reinforced Masonry for partition walls (100 mm thick) in CM (1:4) prop. (Cement : Screened sand) using fly
ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of
50 Kg/Sq.cmand placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement
pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like
cement, steel, sand, bricks, water etc., to site, including sales & other taxes on all materials, all operational,
incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry,
lift charges, curing, etc., and overheads & contractors profit but excluding cost of steel and its fabrication charges
complete for finished item of work. (APSS No. of 509)
(BLD-CSTN-5-12)
Unit - 10sqm
A.MATERIALS :
Flyash lime solid blocks TBSC-A.II-11 247 Nos. 12000.00 1000 Nos. 2964.00
Cement 36.00 Kgs 5600.00 1000 Kgs 201.60
Fine aggregate ( Sand ) 0.10 Cum 800.00 1 Cum 80.00
B.LABOUR :
1st class mason 0.42 Nos. 545.00 1 Each 228.90
2nd class mason 0.92 Nos. 515.00 1 Each 473.80
Mazdoor (Unskilled) 2.80 Nos. 490.00 1 Each 1372.00
Add for MA @ 20% 0.20 2074.70 414.94
water charges @ 1% 0.01 5735.24 57.35
Rate per 10 sqm 5792.59
Rate per 1 sqm 579.26
Internal walls :
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as worked out above 579.26 579.26 579.26 579.26 579.26 579.26
Hire charges for Access Scaffolding 10.86 10.86 10.86 10.86 10.86 10.86
Labour charges for scaffolding 88.60 127.46 166.33 205.20 244.06 282.93
Add for MA @ 20% 17.72 25.49 33.27 41.04 48.81 56.59
Lift charges ( Page 131 of Std. Data ) 0.00 20.75 41.49 62.24 82.99 103.74
Add for MA @ 20% 0.00 4.15 8.30 12.45 16.60 20.75
Rate per 1 sqm 696.44 767.97 839.50 911.05 982.58 1054.12
Overheads & Contractors Profit @ 13.615% 94.82 104.56 114.30 124.04 133.78 143.52
23 Masonry work in CM (1:6) prop (cement: Screened sand) in super structure with Aerated (Cellular)
Autoclaved Concrete Blocks conforming to IS:2185 (Part-3) - 1984 and IS:6441-1972 of
Compressive strength 3 N/mm2 600x 230 x 200 mm from approved source having minimum
crushing strength of 3 N/Sq.m including cost and conveyance of all materials like cement, sand,
bricks, water etc., to site, including sales & other taxes on all materials, all operational, incidental and
labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges,
curing, etc., complete but excluding seigniorage charges for finished item of work. (APSS No. 501 &
Unit
504).= 1 Cum
A.MATERIALS
No of blocks required for 37 Nos 106.00 1 Nos 3922.00
1 Cum of Masonry
Cement 24.00 Kgs 5600.00 1000 Kgs 134.40
Fine aggregate ( Sand ) 0.100 Cum 800.00 1 Cum 80.00
B .LABOUR
Mason 1st class 0.420 Nos. 545.00 1 Each 228.90
Mason 2nd class 0.920 Nos. 515.00 1 Each 473.80
Man Mazdoor 0.700 Nos. 490.00 1 Each 343.00
Women Mazdoor 2.100 Nos. 490.00 1 Each 1029.00
Add for MA @ 20% 0.20 2074.70 414.94
water charges @ 1% 0.01 6626.04 66.26
Rate per 1 cum 6692.30
b) Superstructure :
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as worked out above 6692.30 6692.30 6692.30 6692.30 6692.30 6692.30
Hire charges for Access Scaffolding 47.22 47.22 47.22 47.22 47.22 47.22
Labour charges for scaffolding 385.22 554.17 723.17 892.17 1061.13 1230.13
Add for MA @ 20% 77.04 110.83 144.63 178.43 212.23 246.03
Lift charges ( Page 131 of Std. Data ) 0.00 207.47 414.94 622.41 829.88 1037.35
Add for MA @ 20% 0.00 41.49 82.99 124.48 165.98 207.47
7201.78 7653.49 8105.25 8557.01 9008.73 9460.49
Overheads & Contractors Profit @ 13.615% 980.52 1042.02 1103.53 1165.04 1226.54 1288.05
24 Masonry work 100 mm thick in CM (1:4) prop (cement: Screened sand) in super structure with
Aerated (Cellular) Autoclaved Concrete Blocks conforming to IS:2185 (Part-3) - 1984 and IS:6441-
1972 of Compressive strength 3 N/mm2 600x 200 x 100 mm from approved source having minimum
crushing strength of 3 N/Sq.m including cost and conveyance of all materials like cement, sand,
bricks, water etc., to site, including sales & other taxes on all materials, all operational, incidental and
labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges,
curing, etc., complete but excluding seigniorage charges for finished item of work. (APSS No. 501 &
504).
Unit - 10sqm
A.MATERIALS :
Flyash lime solid blocks 84 Nos. 47.00 1 Nos. 3948.00
Cement 36.00 Kgs 5600.00 1000 Kgs 201.60
Fine aggregate ( Sand ) 0.100 cu.m. 800.00 1 cu.m. 80.00
B.LABOUR :
Internal walls :
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as worked out above 678.64 678.64 678.64 678.64 678.64 678.64
Hire charges for Access Scaffolding 10.86 10.86 10.86 10.86 10.86 10.86
Labour charges for scaffolding 88.60 127.46 166.33 205.20 244.06 282.93
Add for MA @ 20% 17.72 25.49 33.27 41.04 48.81 56.59
Lift charges ( Page 131 of Std. Data ) 0.00 20.75 41.49 62.24 82.99 103.74
Add for MA @ 20% 0.00 4.15 8.30 12.45 16.60 20.75
Rate per 1 sqm 795.82 867.35 938.88 1010.43 1081.96 1153.50
Overheads & Contractors Profit @ 13.615% 108.35 118.09 127.83 137.57 147.31 157.05
23 Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal
(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and
conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, including
sales & other taxes on all materials and including all charges for mixing, laying concrete in position, curing etc., &
lift charges , and overheads & contractors profit for Bed Blocks & Hold Fasts for finished item of work. (APSS
No. 402)
(BLD-CSTN-3-11)
Unit : 1 cum
A.MATERIALS :
Cement 330.00 Kgs 5600.00 1000 Kgs 1848.00
20mm HBG graded metal 0.90 Cum 1055.26 1 Cum 949.73
Fine aggregate ( Sand ) 0.45 Cum 600.00 1 Cum 270.00
Water (including curing) 1.20 kl 98.00 1 kl 117.60
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) 1.00 hour 180.80 1 hour 180.80
capacity
Crew charges 1.00 hour 284.70 1 hour 284.70
Add MA on crew charges 0.20 284.70 56.94
C.LABOUR :
1st class mason 0.10 Nos. 545.00 1 Each 54.50
Mazdoor (unskilled) 1.39 Nos. 490.00 1 Each 681.10
Add for MA @ 20% 0.20 735.60 147.12
4590.49
Overheads & Contractors Profit @ 13.615% 0.13615 4590.49 625.00
25 Plain Cement Concrete M 20 design mix using Concrete Batching Plant, 20mm size hard granite machine
crushed graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved
quarry, using a minimum quantity of 330 kgs. of cement per 1 cum of concrete including cost and conveyance of
all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including steel centering,
shuttering, machine mixing, lift charges, laying concrete,vibrating, curing, overheads & contrctors profit etc.,
complete for finished item of work (APSS No. 402 & 403) for steps.
26 Reinforced Cement Concrete M 20 design mix using 12mm size hard granite machine crushed graded metal
(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum
quantity of 350 kgs. of cement per 1 cum of concrete using Concrete Batching Plant including cost and
conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including
steel centering, shuttering, machine mixing, laying concrete, lift charges, curing etc., and overheads & contractors
profit complete for finished item of work (APSS No. 402 & 403) for sill slabs.
(BLD-CSTN-3-13 - A)
A.MATERIALS :
Cement 350.00 Kgs 5600.00 1000 Kgs 1960.00
12mm HBG graded metal 0.80 Cum 946.25 1 Cum 757.00
Sand 0.40 Cum 600.00 1 Cum 240.00
B.LABOUR :
1st class Mason 0.133 Nos 545.00 1 Each 72.49
2nd class Mason 0.267 Nos 515.00 1 Each 137.51
Mazdoor (both men&women) 3.60 Nos 490.00 1 Each 1764.00
Add for MA @ 20% 0.20 1973.99 394.80
C.MACHINERY :
Batching plant 0.50 cum 0.308 hour 249.00 1 hour 76.69
Crew charges 0.308 hour 426.70 1 hour 131.42
Add MA on crew charges 0.20 131.42 26.28
Water (including for curing) 1.20 kl 98.00 1 kl 117.60
Basic cost per 1 cum 5677.79
(BLD-CSTN-3-16)
A.MATERIALS :
Cement 350.00 Kgs 5600.00 1000 Kgs 1960.00
12mm HBG graded metal 0.80 Cum 946.25 1 Cum 757.00
Sand 0.40 Cum 600.00 1 Cum 240.00
B.LABOUR :
1st class Mason 0.067 Nos 545.00 1 Each 36.52
2nd class Mason 0.133 Nos 515.00 1 Each 68.50
Mazdoor (both Men & Women) 3.077 Nos 490.00 1 Each 1507.73
Add for MA @ 20% 0.20 1612.74 322.55
C.MACHINERY :
Batching plant 0.50 cum 0.308 hour 249.00 1 hour 76.69
Crew charges 0.308 hour 426.70 1 hour 131.42
Add MA on crew charges 0.20 131.42 26.28
Water(including for curing) 1.20 kl 98.00 1 kl 117.60
Basic cost per 1cum 5244.29
(BLD-CSTN-3-16)
A.MATERIALS :
Cement 350.00 Kgs 5600.00 1000 Kgs 1960.00
12mm HBG graded metal 0.80 Cum 946.25 1 Cum 757.00
Sand 0.40 Cum 600.00 1 Cum 240.00
B.LABOUR :
1st class Mason 0.067 Nos 545.00 1 Each 36.52
2nd class Mason 0.133 Nos 515.00 1 Each 68.50
Mazdoor (both Men & Women) 3.077 Nos 490.00 1 Each 1507.73
Add for MA @ 20% 0.20 1612.74 322.55
C.MACHINERY :
Batching plant 0.50 cum 0.308 hour 249.00 1 hour 76.69
Crew charges 0.308 hour 426.70 1 hour 131.42
Add MA on crew charges 0.20 131.42 26.28
Water(including for curing) 1.20 kl 98.00 1 kl 117.60
Basic cost per 1cum 5244.29
28 Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different
diameters for RCC
(BLD-CSTN-4.2)& works , including
Amendment in SoRlabour charges for straightening, cutting, bending to required
2011-12 page No. 392
Unit - 1 MT
a) Material
HYSD bars including 5% for overlaps and 1.05 MT 0.00 1 MT 0.00
wastage
Binding wire 6.00 Kgs 66.00 1 Kgs 396.00
b) Labour for cutting , bending , shifting to site ,
tying and placing in position
1st class Blacksmith / Barbender 3.00 Nos. 645.00 1 Each 1935.00
2nd class Blacksmith / Barbender 7.00 Nos. 540.00 1 Each 3780.00
Mazdoor(Unskilled) 10.00 Nos. 490.00 1 Each 4900.00
Add for MA @ 20% 0.20 10615.00 2123.00
13134.00
28 Providing Thermo Mechanically Treated (TMT) (Fe -500/500D/550D from Primary producer TATA, SAIL,
VSP, JSW &Shyam Steel etc as per IS 1786-2008) of different diameters for RCC works , including labour
charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of
approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including
all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire,
cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying
including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item
of work. (APSS No.126).
29 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS 432) of different diameters including labour
charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of
approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including
all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire,
cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying
including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item
of work.(APSS No.126)
(BLD-CSTN-8-3)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 8mm thick
Cement 26.40 Kgs 5600.00 1000 Kgs 147.84
Fine aggregate (Sand) 0.11 Cum 800.00 1 Cum 88.00
Top coat in CM(1:4) , 4mm thick
Cement 14.40 Kgs 5600.00 1000 Kgs 80.64
Fine aggregate (Sand) 0.04 Cum 800.00 1 Cum 32.00
B.LABOUR :
1st Class Mason 0.63 Nos. 545.00 1 Each 343.35
2nd Class Mason 1.47 Nos. 515.00 1 Each 757.05
Mazdoor (Unskilled) 3.90 Nos. 490.00 1 Each 1911.00
Add for MA @ 20% 0.20 3011.40 602.28
water charges @ 1% 0.01 3962.16 39.62
Rate per 10 Sqm 4001.78
Rate per 1 Sqm 400.18
( BLD-CSTN-8-10)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 8mm thick
Cement 26.40 Kgs 5600.00 1000 Kgs 147.84
Fine aggregate (Sand) 0.11 Cum 800.00 1 Cum 88.00
Top coat in CM(1:4) , 4mm thick
Cement 14.40 Kgs 5600.00 1000 Kgs 80.64
Fine aggregate (Sand) 0.04 Cum 800.00 1 Cum 32.00
B.LABOUR :
1st Class Mason 0.63 Nos. 545.00 1 Each 343.35
2nd Class Mason 1.47 Nos. 515.00 1 Each 757.05
Mazdoor (Unskilled) 3.90 Nos. 490.00 1 Each 1911.00
Add for MA @ 20% 0.20 3011.40 602.28
water charges @ 1% 0.01 3962.16 39.62
Rate per 10 Sqm 4001.78
Rate per 1 Sqm 400.18
Walls in superstructure :
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as worked out above 400.18 400.18 400.18 400.18 400.18 400.18
Hire charges for Access Scaffolding 1.09 1.09 1.09 1.09 1.09 1.09
Labour charges for scaffolding 8.86 12.75 16.63 20.52 24.41 28.29
Add for MA @ 20% 1.77 2.55 3.33 4.10 4.88 5.66
Lift charges (Page 131 of Std. Data) 0.00 30.11 60.23 90.34 120.46 150.57
Add for MA @ 20% 0.00 6.02 12.05 18.07 24.09 30.11
Rate per 1 Sqm 411.90 452.70 493.51 534.30 575.11 615.90
Overheads & Contractors Profit @ 13.615% 56.08 61.64 67.19 72.74 78.30 83.86
(BLD-CSTN-8-3)
Unit : 10 sqm
A.MATERIALS :
Cement 43.20 Kgs 5600.00 1000 Kgs 241.92
Fine aggregate ( Sand ) 0.15 cu.m. 800.00 1 cu.m. 120.00
B.LABOUR :
1st Class Mason 0.60 Nos. 545.00 1 Each 327.00
Mazdoor (Unskilled) 0.96 Nos. 490.00 1 Each 470.40
Add for MA @ 20% 0.20 797.40 159.48
water charges @ 1% 0.01 1318.80 13.19
Rate per 10 Sqm 1331.99
Rate per 1 Sqm 133.20
a) for basement :
Rate per 1 Sqm 1.00 sqm 133.20 1 sqm 133.20
Overheads & Contractors Profit @ 13.615% 0.13615 133.20
18.14
Rate per 1 Sqm 151.34
Say 151.00
b) Walls in superstructure :
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as worked out above 133.20 133.20 133.20 133.20 133.20 133.20
Hire charges for Access Scaffolding 1.09 1.09 1.09 1.09 1.09 1.09
Labour charges for scaffolding 8.86 12.75 16.63 20.52 24.41 28.29
Add for MA @ 20% 1.77 2.55 3.33 4.10 4.88 5.66
Lift charges ( Page 131 of Std. Data ) 0.00 7.97 15.95 23.92 31.90 39.87
Add for MA @ 20% 0.00 1.59 3.19 4.78 6.38 7.97
144.92 159.15 173.39 187.62 201.86 216.08
Overheads & Contractors Profit @ 13.615% 19.73 21.67 23.61 25.54 27.48 29.42
33 Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6)
and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of
(BLD-CSTN-8-9)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 16mm thick
Cement 43.20 Kgs 5600.00 1000 Kgs 241.92
Fine aggregate (Sand) 0.18 Cum 800.00 1 Cum 144.00
Top coat in CM(1:4), 4mm thick
Cement 14.40 Kgs 5600.00 1000 Kgs 80.64
Fine aggregate (Sand) 0.04 Cum 800.00 1 Cum 32.00
B.LABOUR :
1st Class Mason 0.63 Nos. 545.00 1 Each 343.35
2nd Class Mason 1.47 Nos. 515.00 1 Each 757.05
Mazdoor (Unskilled) 3.90 Nos. 490.00 1 Each 1911.00
Add for MA @ 20% 0.20 3011.40 602.28
water charges @ 1% 0.01 4112.24 41.12
Rate per 10 Sqm 4153.36
Rate per 1 Sqm 415.34
Walls in superstructure :
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as worked out above 415.34 415.34 415.34 415.34 415.34 415.34
Hire charges for Access Scaffolding 1.09 1.09 1.09 1.09 1.09 1.09
Labour charges for scaffolding 8.86 12.75 16.63 20.52 24.41 28.29
Add for MA @ 20% 1.77 2.55 3.33 4.10 4.88 5.66
34 Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance
of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and
(BLD-CSTN-8-8)
Unit : 10 sqm
A.MATERIALS :
Cement 60.48 Kgs 5600.00 1000 Kgs 338.69
Fine aggregate (Sand) 0.21 Cum 800.00 1 Cum 168.00
B.LABOUR :
2nd Class Mason 0.94 Nos. 515.00 1 Each 484.10
Mazdoor (Unskilled) 1.60 Nos. 490.00 1 Each 784.00
Add for MA @ 20% 0.20 1268.10 253.62
water charges @ 1% 0.01 2028.41 20.28
Rate per 10 Sqm 2048.69
Rate per 1 Sqm 204.87
a) for basement :
Rate per 1 Sqm 1.00 sqm 204.87 1 sqm 204.87
Overheads & Contractors Profit @ 13.615% 0.13615 204.87
27.89
Rate per 1 Sqm 232.76
Or Say Say 233.00
b) Walls in superstructure :
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as worked out above 204.87 204.87 204.87 204.87 204.87 204.87
Hire charges for Access Scaffolding 1.09 1.09 1.09 1.09 1.09 1.09
Labour charges for scaffolding 8.86 12.75 16.63 20.52 24.41 28.29
Add for MA @ 20% 1.77 2.55 3.33 4.10 4.88 5.66
Lift charges ( Page 131 of Std. Data ) 0.00 12.68 25.36 38.04 50.72 63.41
Add for MA @ 20% 0.00 2.54 5.07 7.61 10.14 12.68
216.59 236.48 256.35 276.23 296.11 316.00
Overheads & Contractors Profit @ 13.615% 29.49 32.20 34.90 37.61 40.32 43.02
33 Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using
screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645-
2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement,
laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at
regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing
compound, water etc., to site, including sales & other taxes on all materials and operational, incidental, and labour
charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off
junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No.
901 & 903).
(BLD-CSTN-10-25)
Unit : 10 sqm
A.MATERIALS :
Cement 100.80 Kgs 5600.00 1000 Kgs 564.48
Fine aggregate (Sand) 0.21 Cum 800.00 1 Cum 168.00
Integral cement waterproofing liquid 0.40 Ltrs 201.00 1.00 Ltrs 80.40
B.LABOUR :
1st Class Mason 0.66 Nos. 545.00 1 Each 359.70
2nd Class Mason 1.54 Nos. 515.00 1 Each 793.10
Mazdoor (Unskilled) 3.70 Nos. 490.00 1 Each 1813.00
Add for MA @ 20% 0.20 2965.80 593.16
water charges @ 1% 0.01 4371.84 43.72
Rate per 10 Sqm 4415.56
(BLD-CSTN-8-2)
A.MATERIALS :
Cement 72.00 Kgs 5600.00 1000 Kgs 403.20
Fine aggregate (Sand) 0.15 Cum 800.00 1 Cum 120.00
Integral cement waterproofing liquid 0.29 Ltrs 201.00 1.00 Ltrs 58.29
B.LABOUR :
1st Class Mason 0.60 Nos. 545.00 1 Each 327.00
Mazdoor (Unskilled) 0.96 Nos. 490.00 1 Each 470.40
Add for MA @ 20% 0.20 797.40 159.48
water charges @ 1% 0.01 1538.37 15.38
Rate per 10 Sqm 1553.75
(BLD-CSTN-8-11)
Unit : 10 sqm
A)MATERIALS
Rabbit wire mesh 13.30 sqm 20.00 1 sqm 266.00
Cement for base coat and plastering 120.00 Kgs 5600.00 1000 Kgs 672.00
Cement for lumps 50.00 Kgs 5600.00 1000 Kgs 280.00
Fine aggregate (Sand) 0.25 cu.m. 800.00 1 cu.m. 200.00
12mm plastering 2 coats in 1:6 & 1:4 both 21.80 sqm 400.18 1 sqm 8723.92
sides
Excluding HYSD steel/mild steel & binding
wire
B) LABOUR CHARGES
1st Class Mason 8.00 Nos. 545.00 1 Each 4360.00
Operator concrete mixer 1.00 Nos. 580.00 1 Each 580.00
Mazdoor (Unskilled) 10.00 Nos. 490.00 1 Each 4900.00
Add for MA @ 20% 0.20 9840.00 1968.00
C)Machinery :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) 2.00 hours 180.80 1 hours 361.60
capacity
Crew charges 2.00 hours 284.70 1 hours 569.40
Add MA on crew charges 0.20 284.70 113.88
water charges @ 1% 0.01 22994.80 229.95
Rate per 10 Sqm 23224.75
Rate per 1 Sqm 2322.48
36 Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick set over a base
coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab
(BLD-CSTN-9-1)
Unit = 10 sqm.
A. MATERIALS:
Polished shahabad stone 15 to 18mm thick 11.00 Sqm 1734.59 10 Sqm 1908.05
Cement for CM (1:8) proportion for base coat 21.60 Kgs 5600.00 1000 Kgs 120.96
37 Flooring with Polished black Kadapa slabs 15mm to 18mm thick set over a base coat of CM (1:8)
,(BLD-CSTN-9-1)
12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement
Unit = 10 sqm.
A. MATERIALS:
Polished black Kadapa slabs minimum of 11.00 Sqm 1444.59 10 Sqm 1589.05
15mm thick
Cement for CM (1:8) proportion for base coat 21.60 Kgs 5600.00 1000 Kgs 120.96
36 Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm
1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and
designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using
screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency
spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching
shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads &
contractors profit complete for finished item of work. (APSS No.701 & 707)
(BLD-CSTN-9-6)
Unit = 10 sqm.
A. MATERIALS:
Ceramic tiles 7 to 8mm thick (300mm x 10.50 Sqm 315.00 1 Sqm 3307.50
300mm)
Cement for CM(1:8) proportion for base coat 21.60 Kgs 5600.00 1000 Kgs 120.96
1 Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm 1st
quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and
designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using
screened sandover CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency
spread @ 3.3 Kgs per Sqm & jointed epoxy emulsion grout/ synthetic /resin adhesive in width of 3-5 mm with
Nylonspacers excluding cost of tiles neatly with to full depth mixed with pigment of matching shade, including cost
of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit complete for
finished item of work. (In toilets) (APSS No.701 & 707) .
(BLD-CSTN-9-6)
Unit = 10 sqm.
A. MATERIALS:
Ceramic tiles 7 to 8mm thick (300mm x 10.50 Sqm 315.00 1 Sqm 3307.50
300mm)
Cement for CM(1:8) proportion for base coat 21.60 Kgs 5600.00 1000 Kgs 120.96
1 Flooring with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600
mm and thickness between 8 to 10mm 1st quality conforming to IS: 13711, IS: 13712, IS:
(BLD-CSTN-9-5)
Unit = 10 sqm.
A. MATERIALS:
Vitrified tiles 8 to 10mm thick of size 600mm 10.50 Sqm 443.00 1 Sqm 4651.50
x 600mm
Cement for CM(1:8)proportion for base coat 21.60 Kgs 5600.00 1000 Kgs 120.96
(BLD-CSTN-9-5)
Unit = 10 sqm.
A. MATERIALS:
Vitrified tiles 8 to 10mm thick of size 600mm 10.50 Sqm 443.00 1 Sqm 4651.50
x 600mm
Cement for CM(1:8)proportion for base coat 21.60 Kgs 5600.00 1000 Kgs 120.96
(BLD-CSTN-9-5)
Unit = 10 sqm.
A. MATERIALS:
digital / polished glazed full body 10.50 Sqm 800.00 1 Sqm 8400.00
porcelain vitrified tiles with any type of design
texture 9 to 11mm thick of size 900mm x
900mm TBSCC.II-09
Cement for CM(1:8)proportion for base coat 21.60 Kgs 5600.00 1000 Kgs 120.96
7F 8F 9F
13069.72 13069.72 13069.72
1976.28 2305.66 2635.04
395.26 461.13 527.01
15441.26 15836.52 16231.77
2102.33 2156.14 2209.96
17543.59 17992.66 18441.73
1754.36 1799.27 1844.17
1754 1799 1844
38 Vaccum dewatering cement concrete flooring 75mm thick using M 25 grade design mix corresponding to IS 456
with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm
Cement 380.00 Kgs 5600.00 1000 Kgs 2128.00
20mm graded metal 0.80 Cum 1055.26 1 Cum 844.21
Fine aggregate ( Sand ) 0.40 Cum 600.00 1 Cum 240.00
Water (including curing) 1.20 kl 98.00 1.00 kl 117.60
B.MACHINERY :
39 Supply and fixing of Venetian blinds Vertical blinds 100 mm wide with all accessories including cost and
conveynace of materials, labour charges and overheads & contractor profit etc., for complete finished item of
work.
Cost of material (Rate as per SSR
Sl.No. 758 - P.No. 138 TBSC-R.I-10) 1.00 Sqm 1229.00 1 Sqm 1229.00
Rate per 1 SQM 1229.00
Overheads & Contractors Profit @ 13.615% 0.13615 1229.00 167.33
1396.33
Say 1396.00
40 Supply and fixing of Aluminium Venetian Blinds horizontal 25.4 mm wide with all accessories. including cost and
conveynace of materials, labour charges and overheads & contractor profit etc., for complete finished item of
work.
Cost of material (Rate as per SSR
Sl.No. 756 - P.No. 138 TBSC-R.I-
08) 1.00 Sqm 760.00 1 Sqm 760.00
Rate per 1 SQM 760.00
Overheads & Contractors Profit @ 13.615% 0.13615 760.00 103.47
863.47
Say 863.00
41 Roofing with UV resistant multi-wall polycarbonate sheets of any colour 6mm thick fixed with Aluminium
universal glazing set 40 mm wide and as per drawing etc., complete, excluding the cost of purlins, rafters,
trusses, aluminium universal glazing set 40mm wide including cost and conveyance of all materials, labour
charges, overheads and contractors profit etc., complete for finished item of work in all floors.
A) Material requirement
multi-wall polycarbonate sheets 6.00 mm 1.00 Sqm 1340.00 1 Sqm 1340.00
thick TBSC-D.VI-20
Overheads & Contractors Profit @ 13.615% 0.13615 1340.00 182.44
42 Supplying and fixing Aluminium Universal glazing set 40mm wide for jointing and fixing Polycarbonate sheets
including cost and conveyance of all materials, labour charges, overheads and contractors profit etc., complete for
finished item of work.
43 Providing Plinth protection with a bed of 100mm thick PCC(1:5:10) using screened sand ,40mm size HB Granite
metal and on top of PCC, 20mm thick granolithic concrete flooring with CC(1:1:2) prop.using 6mm to 12mm size
graded hard granite machine crushed metal laid monolithically already laid, in alternate panels of size not
exceeding 1.5 x 1.5 Mts. and providing 5mm thick glass strips between the pannels and finishing the top surface
to required smoothness and slopes including grooves, thread lining as directed by the Engineer - in - charge
including cost and conveyance of all materials to site and operational & incidental and labour charges like mixing
of cement concrete, laying, curing, lift charges etc., and overheads & contractors profit complete including cost of
CC bed for finished item of work. (APSS No.701 & 710).
38 Flooring with granite stone tiles 8mm thick (mirror polished of all shades) of 1st quality and of size
as approved by Engineer-in-charge with borders and design as per the approved flooring pattern as
(BLD-CSTN-9-9)
Unit = 10 sqm.
A. MATERIALS:
Granite stone tiles 8mm thick (mirror 10.50 Sqm 1110.00 1 Sqm 11655.00
polished of all shades)
Cement for CM(1:8) for base coat 21.60 Kgs 5600.00 1000 Kgs 120.96
Cement for slurry 33.00 Kgs 5600.00 1000 Kg 184.80
White Cement 6.00 Kgs 31.00 1 Kg 186.00
Sand for CM(1:8) 0.20 Cum 800.00 1 Cum 160.00
B .LABOUR
Mason 1st class 0.96 Nos 545.00 1 Each 523.20
Mason 2nd class 2.24 Nos 515.00 1 Each 1153.60
Mazdoor(un skilled) 3.30 Nos 490.00 1 Each 1617.00
Add for MA @ 20% 0.20 3293.80 658.76
Add water charges 1% 0.01 16259.32 162.59
Rate for 10 sqm 16421.91
44 Flooring with 16 to 18mm thick high polished granite stone slabs other than black and regular colours (i.e.
of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the
pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar
(1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement
slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with
pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water ,
granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and all other
taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work
(S.S.701 & special)
(BLD-CSTN-9-7)
Unit = 10 sqm.
45 Flooring with 16 to 18 mm thick high polished granite stone slabs black colour as approved by the
Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using
screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like
consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to
work site and all operational, incidental labour & lift charges, half rounding the edge , polishing charges and all
other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of
work for platforms (S.S.701 & special)
(BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs black 16 to 10.50 Sqm 2419.00 1 Sqm 25399.50
18mm thick
Cement for CM(1:8) for base coat 36.00 Kgs 5600.00 1000 Kgs 201.60
Cement for slurry 33.00 Kgs 5600.00 1000 Kgs 184.80
White cement for jointing 6.00 Kgs 31.00 1 Kg 186.00
Sand for CM(1:8) 0.20 Cum 800.00 1 Cum 160.00
B .LABOUR
Mason 1st class 3.00 Nos 545.00 1 Each 1635.00
Mason 2nd class 1.00 Nos 515.00 1 Each 515.00
Mazdoor(un skilled) 8.00 Nos 490.00 1 Each 3920.00
Add for MA @ 20% 0.20 6070.00 1214.00
Machine cutting charges 16.67 RM 21.00 1 RM 350.07
Half rounding the edges 16.67 RM 407.00 1 RM 6784.69
Add for MA @ 20% 0.20 2853.90 570.78
Add water charges 1% 0.01 41121.44 411.21
Rate for 10 sqm 41532.66
1 Supplying and fixing of 16 to 18 mm thick High Polished Granite stone slabs black colour as approved by
the Engineer-in-Charge of length not less than 2.43 mts set over granite platform and fixing with polymer
cementitious additive granite slabs etc., to work site and all operational, incidental labour & lift charges, half
rounding the edge , polishing charges and all other taxes exceluding GST on all materials, cost of base coat and
overheads & contractors profit complete for finished item of work for platforms (S.S.701 & special) -kitchen
granite patti
(BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs black 16 to 10.50 Sqm 2419.00 1 Sqm 25399.50
18mm thick
Polymer cementitious additive for fixing 36.00 Kgs 207.00 1 Kgs 7452.00
tiles/stones etcTBSC-Q.III-05
B .LABOUR
Mason 1st class 3.00 Nos 545.00 1 Each 1635.00
Mason 2nd class 1.00 Nos 515.00 1 Each 515.00
Mazdoor(un skilled) 8.00 Nos 490.00 1 Each 3920.00
Add for MA @ 20% 0.20 6070.00 1214.00
Machine cutting charges 16.67 RM 21.00 1 RM 350.07
Half rounding the edges 16.67 RM 407.00 1 RM 6784.69
Add for MA @ 20% 0.20 2853.90 570.78
Add water charges 1% 0.01 47841.04 478.41
Rate for 10 sqm 48319.45
(BLD-CSTN-9-13)
Unit : 10sqm
A.MATERIALS :
6mm to 12mm HBG Metal 0.17 Cum 946.25 1 Cum 160.86
Cement 120.00 Kgs 5600.00 1000 Kgs 672.00
Sand 0.085 Cum 600.00 1 Cum 51.00
B. LABOUR
Mason 1st class 1.25 Nos. 545.00 1 Each 681.25
Mason 2nd class 0.06 Nos. 515.00 1 Each 30.90
Mazdoor (unskiled) 3.00 Nos. 490.00 1 Each 1470.00
Add for MA @ 20% 0.20 2182.15 436.43
Add water charges 1% 1% 3502.44 35.02
Rate per 10 Sqm 3537.47
47 Flooring with chequered cement concrete heavy duty tiles confirming to IS:13801 using aggregates, cement,
pigments of size 300mm x 300mm and thickness 25mm of any shade as approved by Engineer-In-Charge set
over base coat of cement mortar (1:6), 12 mm thick using screened sand over CC bed alredy laid or RCC roof
slab including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with neat white
cement to full depth mixed with pigment of matching shade including cost and conveyance of all materials like
cement, sand, water and tiles etc.,and overheads & contractors profit complete for finished item of work.
(BLD-CSTN-9-4)
Unit : 10sqm
A.MATERIALS :
Chequred tiles 25mm thick TBSC-C.VIII-04 10.50 sqm 288.00 1 sqm 3024.00
Cement for CM(1:6) proportion 28.80 Kgs 5600.00 1000 Kgs 161.28
for base coat
Cement for slurry 33.00 Kgs 5600.00 1000 Kgs 184.80
Cement for jointing & pointing 6.00 Kgs 5600.00 1000 Kgs 33.60
Sand for CM(1:6) proportion 0.12 Cum 800.00 1 Cum 96.00
B. LABOUR
Mason 2nd class 0.96 Nos. 450.00 1 Each 432.00
Man Mazdoor 2.24 Nos. 425.00 1 Each 952.00
Mazdoor (unskiled) 3.30 Nos. 490.00 1 Each 1617.00
Add for MA @ 20% 0.20 3001.00 600.20
Add water charges 1% 0.01 7100.88 71.01
Rate per 10 Sqm 7171.89
47 Flooring with Johnson EnduraTloor tiles-lvory & Terracota confirming to IS:13801 using aggregates, cement,
pigments of size 300mm x 300mm and thickness 10mm of any shade as approved by Engineer-In-Charge set
over base coat of cement mortar (1:6), 12 mm thick using screened sand over CC bed alredy laid or RCC roof
slab including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with neat white
cement to full depth mixed with pigment of matching shade including cost and conveyance of all materials like
cement, sand, water and tiles etc.,and overheads & contractors profit complete for finished item of work.
(BLD-CSTN-9-4)
Unit : 10sqm
A.MATERIALS :
Johnson EnduraTloor tiles-lvory & Terracota 10.50 sqm 437.30 1 sqm 4591.65
10mm thick (Quotation)
Cement for CM(1:6) proportion 28.80 Kgs 5600.00 1000 Kgs 161.28
for base coat
Cement for slurry 33.00 Kgs 5600.00 1000 Kgs 184.80
Cement for jointing & pointing 6.00 Kgs 5600.00 1000 Kgs 33.60
Sand for CM(1:6) proportion 0.12 Cum 800.00 1 Cum 96.00
B. LABOUR
Mason 2nd class 0.96 Nos. 450.00 1 Each 432.00
Man Mazdoor 2.24 Nos. 425.00 1 Each 952.00
Mazdoor (unskiled) 3.30 Nos. 490.00 1 Each 1617.00
Add for MA @ 20% 0.20 3001.00 600.20
Add water charges 1% 0.01 8668.53 86.69
Rate per 10 Sqm 8755.22
Cement for CM (1:5) proportion for base coat 34.56 Kgs 5600.00 1000 Kgs 193.54
49 Providing Polished black Kadapa slabs 15mm to 18mm thick in single piece as specified set over
a) a base coat
Treads of CMwide
of 0.30m (1:5): , 12mm thick using screened sand over already laid CC bed / RCC roof slab
(BLD-CSTN-9-1)
Unit = 10 sqm.
A. MATERIALS:
48 Providing 16 to 18mm thick high polished granite stone slabs other than black and regular colours (i.e. of
shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the
pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar
(1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement
slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with
pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water ,
granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of
treads , polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors
profit complete for finished item of work for treads and risers (S.S.701 & special)
49 Providing skirting to internal walls to 10.00 cm height with Polished Shahabad/Tandur stone
slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm
(BLD-CSTN-9-23)
Unit = 10 sqm
A.MATERIALS :
Cost of shahabad stone slabs 11.00 sqm 1734.59 10 sqm 1908.05
Sand for CM(1:5) base coat 0.12 cum 800.00 1 cum 96.00
Cement for CM(1:5) base coat 34.56 Kgs 5600.00 1000 Kgs 193.54
Cement for slurry 33.00 Kgs 5600.00 1000 Kgs 184.80
B.LABOUR
Mason 1st class 0.96 Nos. 545.00 1 Each 523.20
Mason 2nd class 2.24 Nos. 515.00 1 Each 1153.60
Mazdoor(unskilled) 3.10 Nos. 490.00 1 Each 1519.00
Add for MA @ 20% 0.20 3195.80 639.16
Add water charges 1% 0.01 6217.35 62.17
Rate for 10 sqm 6279.52
50 Providing skirting to internal walls to 10.00 cm height with Polished Kadapa stone slabs 15mm
to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using
(BLD-CSTN-9-22)
Unit = 10 sqm
A.MATERIALS :
Cost of Kadapa stone slabs 10.50 sqm 1444.59 10 sqm 1516.82
Sand for CM(1:5) base coat 0.12 cum 800.00 1 cum 96.00
Cement for CM(1:5) base coat 34.56 Kgs 5600.00 1000 Kgs 193.54
Cement for slurry 33.00 Kgs 5600.00 1000 Kgs 184.80
B.LABOUR
Mason 1st class 0.96 Nos. 545.00 1 Each 523.20
Mason 2nd class 2.24 Nos. 515.00 1 Each 1153.60
Mazdoor(unskilled) 3.10 Nos. 490.00 1 Each 1519.00
Add for MA @ 20% 0.20 3195.80 639.16
Add water charges 1% 0.01 5826.12 58.26
Or Say 5884.38
51 Providing skirting to internal walls up to 15 cm height with non-skid full body ceramic floor
tiles of thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to
(BLD-CSTN-9-18)
Unit = 10 sqm
A.MATERIALS :
Cost of Edge cut Rectified ceramic tiles 8 10.50 sqm 300.00 1 sqm 3150.00
mm thick
Sand for CM(1:5) base coat 0.12 cum 800.00 1 cum 96.00
Cement for CM(1:5) base coat 34.56 Kgs 5600.00 1000 Kgs 193.54
Cement for slurry 33.00 Kgs 5600.00 1000 Kgs 184.80
White cement for jointing & pointing 6.00 Kgs 31.00 1 Kg 186.00
B.LABOUR
Mason 1st class 0.77 Nos. 545.00 1 Each 419.65
Mazdoor(unskilled) 0.80 Nos. 490.00 1 Each 392.00
Add for MA @ 20% 0.20 811.65 162.33
Add water charges 1% 0.01 4784.32 47.84
Rate per 10 Sqm 4832.16
52 Providing skirting to internal walls to 10 cm height with soluble salt porcelain vitrified tiles
screen printed and polished of thickness between 8 to 10mm 1st quality conforming to IS: 13711,
(BLD-CSTN-9-20)
Unit = 10 sqm
Cost of vitrified tiles 8-10mm thick 10.50 sqm 443.00 1 sqm 4651.50
Sand for CM(1:5) base coat 0.12 cum 800.00 1 cum 96.00
Cement for CM(1:5) base coat 34.56 Kgs 5600.00 1000 Kgs 193.54
Cement for slurry 33.00 Kgs 5600.00 1000 Kgs 184.80
White cement for jointing & pointing 2.00 Kgs 31.00 1 Kg 62.00
B.LABOUR
Mason 1st class 0.96 Nos. 545.00 1 Each 523.20
Mason 2nd class 2.24 Nos. 515.00 1 Each 1153.60
Mazdoor(unskilled) 3.30 Nos. 490.00 1 Each 1617.00
Add for MA @ 20% 0.20 3293.80 658.76
Add water charges 1% 0.01 9140.40 91.40
Rate for 10 sqm 9231.80
(BLD-CSTN-9-21)
Unit = 10 sqm
Cost of vitrified tiles 8-10mm thick 10.50 sqm 443.00 1 sqm 4651.50
Sand for CM(1:5) base coat 0.12 cum 800.00 1 cum 96.00
Cement for CM(1:5) base coat 34.56 Kgs 5600.00 1000 Kgs 193.54
Cement for slurry 33.00 Kgs 5600.00 1000 Kgs 184.80
White cement for jointing & pointing 2.00 Kgs 31.00 1 Kg 62.00
B.LABOUR
Mason 1st class 0.96 Nos. 545.00 1 Each 523.20
Mason 2nd class 2.24 Nos. 515.00 1 Each 1153.60
Mazdoor(unskilled) 3.30 Nos. 490.00 1 Each 1617.00
Add for MA @ 20% 0.20 3293.80 658.76
Add water charges 1% 0.01 9140.40 91.40
Rate for 10 sqm 9231.80
50 a) Providing skirting to internal walls to 10 cm height with 8mm thick mirror polished granite
tiles length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand
(BLD-CSTN-9-21)
Unit = 10 sqm
A.MATERIALS :
Cost of granite tiles 8mm thick 10.50 sqm 1110.00 1 sqm 11655.00
Sand for CM(1:5) base coat 0.12 cum 800.00 1 cum 96.00
Cement for CM(1:5) base coat 34.56 Kgs 5600.00 1000 Kgs 193.54
Cement for slurry 33.00 Kgs 5600.00 1000 Kgs 184.80
White cement for jointing & pointing 5.00 Kgs 31.00 1 Kg 155.00
B.LABOUR
Mason 1st class 2.10 Nos. 545.00 1 Each 1144.50
Mason 2nd class 4.90 Nos. 515.00 1 Each 2523.50
Mazdoor(unskilled) 0.80 Nos. 490.00 1 Each 392.00
Add for MA @ 20% 0.20 4060.00 812.00
Add water charges 1% 0.01 17156.34 171.56
Rate for 10 sqm 17327.90
b) Cladding to internal walls with 8mm thick mirror polished granite tiles length equal to flooring
tiles,
Rate set
for over
otherbase coat of CM(1:5) 12 mm thickFF
Floors using screened
(G.F) SF sand with
TFcement slurry
4 F of honey
5 F like 6F
Rate as worked out above 17327.90 17327.90 17327.90 17327.90 17327.90 17327.90
Lift charges ( Page 131 of Std. Data ) 0.00 406.00 812.00 1218.00 1624.00 2030.00
Add for MA @ 20% 0.00 81.20 162.40 243.60 324.80 406.00
17327.90 17815.10 18302.30 18789.50 19276.70 19763.90
Overheads & Contractors Profit @ 13.615% 2359.19 2425.53 2491.86 2558.19 2624.52 2690.85
50 a) Providing skirting to internal walls 15cm height with High Polished Granite 16 to 18 mm thick up to 8'-00
(2.43 M) other than black and regular colours, length equal to flooring slabs set over base coat of CM(1:5) 12
mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per
sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of
work.
(BLD-CSTN-9-19)
Unit = 10 sqm
A.MATERIALS :
Cost of high polished granite 10.50 sqm 2845.00 1 sqm 29872.50
Sand for CM(1:5) base coat 0.12 cum 800.00 1 cum 96.00
Cement for CM(1:5) base coat 34.56 Kgs 5600.00 1000 Kgs 193.54
Cement for slurry 33.00 Kgs 5600.00 1000 Kgs 184.80
White cement for jointing & pointing 5.00 Kgs 31.00 1 Kg 155.00
Machine cutting charges 66.67 RM 21.00 1 RM 1400.07
Add for MA @ 20% 0.20 560.03 112.01
B.LABOUR
Mason 1st class 2.10 Nos. 545.00 1 Each 1144.50
Mason 2nd class 4.90 Nos. 450.00 1 Each 2205.00
Man Mazdoor(Beldar) 0.80 Nos. 490.00 1 Each 392.00
Add for MA @ 20% 0.20 3741.50 748.30
Add water charges 1% 0.01 36503.71 365.04
Rate for 10 sqm 36868.75
(BLD-CSTN-9-19)
Unit = 10 sqm
A.MATERIALS :
Cost of high polished granite 10.50 sqm 2845.00 1 sqm 29872.50
Sand for CM(1:5) base coat 0.12 cum 800.00 1 cum 96.00
Cement for CM(1:5) base coat 34.56 Kgs 5600.00 1000 Kgs 193.54
Cement for slurry 33.00 Kgs 5600.00 1000 Kgs 184.80
White cement for jointing & pointing 5.00 Kgs 31.00 1 Kg 155.00
B.LABOUR
Mason 1st class 2.10 Nos. 545.00 1 Each 1144.50
Mason 2nd class 4.90 Nos. 450.00 1 Each 2205.00
Man Mazdoor(Beldar) 0.80 Nos. 490.00 1 Each 392.00
Add for MA @ 20% 0.20 3741.50 748.30
Add water charges 1% 0.01 34991.64 349.92
Rate for 10 sqm 35341.55
(BLD-CSTN-9-18)
Unit = 10 sqm
A.MATERIALS :
cost of glazed full body porcelain wall tiles of 10.50 sqm 750.00 1 sqm
size 300 x 600 mm 7875.00
Sand for CM(1:5) base coat 0.12 cum 800.00 1 cum 96.00
Cement for CM(1:5) base coat 34.56 Kgs 5600.00 1000 Kgs 193.54
Cement for slurry 33.00 Kgs 5600.00 1000 Kgs 184.80
White cement for jointing & pointing 6.00 Kgs 31.00 1 Kg 186.00
B.LABOUR
Mason 1st class 0.77 Nos. 545.00 1 Each 419.65
Mazdoor(unskilled) 0.80 Nos. 490.00 1 Each 392.00
Add for MA @ 20% 0.20 811.65 162.33
Add water charges 1% 0.01 9509.32 95.09
Rate for 10 sqm 9604.41
52 Providing dadooing to walls with glazed full body ceramic tiles of any size and thickness between 5 to 7mm
1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Parts 1 to 15) of any colour and finish in all shades and
designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick using
screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing
with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work.
(BLD-CSTN-9-18)
Unit = 10 sqm
A.MATERIALS :
Cost of glazed coloured tiles TBSC-C.VI-02 10.50 sqm 504.00 1 sqm 5292.00
Sand for CM(1:5) base coat 0.12 cum 800.00 1 cum 96.00
Cement for CM(1:5) base coat 34.56 Kgs 5600.00 1000 Kgs 193.54
Cement for slurry 33.00 Kgs 5600.00 1000 Kgs 184.80
White cement for jointing & pointing 6.00 Kgs 31.00 1 Kg 186.00
B.LABOUR
Mason 1st class 0.77 Nos. 545.00 1 Each 419.65
Mazdoor(unskilled) 0.80 Nos. 490.00 1 Each 392.00
53 Filling with light weight concrete in Cement Concrete (1:5:10) proportion using brick jelly for low roofs
including cost and conveyance of all materials like cement, sand, brick bats etc., to site including cost of all
labour charges for laying concrete, ramming, curing, overheads & contractors profit etc., complete for finished
item of work. (APSS. No. 402)
(BLD-CSTN-3-7)
Unit: 1 Cum
A. Materials :-
Cement 129.60 Kgs 5600.00 1000 Kgs 725.76
Cost of brick jelly 20mm size(1/3rd rate) 460 Nos. 7076.57 1000 Nos. 1085.07
Fine aggregate ( Sand ) 0.45 Cum 600.00 1 Cum 270.00
Water (including curing) 1.20 kl 98.00 1 kl 117.60
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) 1.00 hour 180.80 1 hour 180.80
capacity
Crew Charges 1.00 hour 284.70 1 hour 284.70
Add MA on crew charges 0.20 284.70 56.94
C.LABOUR :
1st class mason 0.10 Nos. 545.00 1 Each 54.50
Mazdoor (unskilled) 1.39 Nos. 490.00 1 Each 681.10
Add for MA @ 20% 0.20 735.60 147.12
3603.59
7F 8F 9F
3603.59 3603.59 3603.59
441.36 514.92 588.48
88.27 102.98 117.70
4133.23 4221.50 4309.77
562.74 574.76 586.78
4695.97 4796.26 4896.55
4696 4796 4897
54 Reinforced cement concrete (1:5:10) proportion (Cement: fine aggregates: coarse aggregate) using 40mm
size (SS5) hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site including centering using
Casurina Ballies , Bamboos , Wooden Reapers , Runners , Wood Posts , Wall Plates etc., shuttering, machine
mixing, laying concrete, lifting concrete manually , curing etc., and overheads & contractors profit complete as per
drawings but excluding cost of steel and it's fabrication charges for finished item of work (APSS NO. 402 & 403)
for Dummy columns.
(BLDS-CSTN-3-13)
Unit: 1 Cum
A.MATERIALS :
Cement 129.60 Kgs 5600.00 1000 Kgs 725.76
40mm HBG metal 0.90 Cum 701.25 1 Cum 631.13
Sand 0.45 Cum 600.00 1 Cum 270.00
B.LABOUR :
1st class Mason 0.167 Nos 545.00 1 Each 91.02
2nd class Mason 0.167 Nos 515.00 1 Each 86.01
Mazdoor (unskilled) 4.70 Nos 490.00 1 Each 2303.00
Add for MA @ 20% 0.20 2480.02 496.00
C.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 180.80 1 hour 180.80
Crew charges 1.00 hour 284.70 1 hour 284.70
Needle vibrator 40mm ( petrol ) 1.00 hour 32.60 1 hour 32.60
Crew charges 1.00 hour 204.90 1 hour 204.90
Add MA on crew charges 0.20 489.60 97.92
Water(including for curing) 1.20 kl 98.00 1 kl 117.60
Basic cost per 1cum 5521.43
55 Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of 50mm
dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 2 Nos for
each step fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding, drilling of
25mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing
thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials,
electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit etc.,
complete for finished item of work.
Drilling of 25mm dia hole (13 x 0.10) SSR 1.30 RM 144.00 1 RM 187.20
Pg 143 (ii))
Base Plate 75mm dia. 13 Nos. 100.00 1 Each 1300.00
Add for anchor bars 13 Nos. 40.00 1 No 520.00
Add for bonding 13 Nos. 20.00 1 No 260.00
20563.70
Rate per 1 RM 4470.37
Rate per 1 Sqm 4967.08
Overheads & Contractors Profit @ 13.615%
0.13615 4967.08 676.27
5643.34
say 5643.00
56 Supplying and fixing of stainless steel (grade 304) 50mm dia pipe and 2mm thick medium class Grip bar along the
Ramp flight/Staircase Flight as per approved drawing including cost and conveyance of all materials to site,
buffing charges, polishing charges, overheads & contractors profit etc complete for finished item of work.
Cost of 50mm dia stainless steel pipes (2.39 2.39 Kgs 407.00 1 Kg 972.73
Kgs/RM)
Labour charges for fabrication 2.39 Kgs 168.00 1 Kg 401.52
Rate per 1 RM 1374.25
Overheads & Contractors Profit @ 13.615%
0.13615 1374.25 187.10
1561.35
say 1561.00
57 Providing 160 mm Dia ISI marked PVC down water take pipes with socket , 2.5mm thick 4.0 kg/sq.cm pressure
of ISI marked including cost of necessary PVC Bends, shoes, iron / PVC clamps and all other accessories and
fixing in position including cost and conveyance of all materials, sales & other taxes on materials to site,
operational & incidental charges including all labour charges for fixing at site etc., and overheads & contractors
profit complete for finished item of work. (APSS No. 1328)
58 Supply and fixing pre-cast RCC grills of any design of 50mm thick manufactured with M 30 grade concrete
using vibro compaction process using jointless FRP moulds to achieve shuttering finish and adequately reinforced
as per the design approved by the Engineer-in-Charge including cost and conveyance of materials to site and
labour charges etc., overheads & contractors profit complete for finished item of work.
59 White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the
surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges
(BLD-CSTN-11-5)
Unit : 10 sqm
A.MATERIALS :
59 Providing and applying epoxy resin based self levelling Conductive Floor System of 2mm thick Antistatic (ESD)
Flooring System comprising of 1 coat of Primer followed by Application of copper tape and 1 layer of SL
Conductive Undercoatand 1 layer of SL Conductive Top coat with Compressive strength after 7 days at +30° C:
50 N/mm2 and Flexural strength after 7 days at +30° C: approx. 25N/mm2 and Tensile strength after 7 days at
+30° C: 16 N/mm2 with aSurface resistance When measured for surfaceresistance in accordance with BS 2050:
1978 (A-1984) and DIN EN 1081, the static Conductive topping including under coats hall be less than 25kΩ.
including overheads & contractors profit etc., design approved by the Engineer-in-Charge complete finished item
of work.
Rate as per SSR TBSCQ.VII-11 1.00 Sqm 1426.00 1.00 Sqm 1426.00
Overheads & Contractors Profit @ 13.615% 0.13615 1426.00 194.15
60 Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm
thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to
remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe
off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320
No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all
operational, incidental, labour charges, over heads and contractors profit etc., complete for finished item of work
in all floors for Internal walls.
62 Painting to new walls with 2 coats of Acrylic based Oil bound Washable Distemper having VOC content
less than 50 grams/litre over promer coat using white cemnt as approved by Engineer-In-Charge, making 3
coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose
powdered materials, including cost and conveyance of all materials to work site and all operational, incidental,
labour charges etc., and overheads & contractors profit complete for finished item of work as per APSS 911 for
internal walls in all floors.
(BLD-CSTN-12-1)
Unit = 10 Sqm
Cost of white cement 0.50 Kg 31.00 1 Kg 15.50
Painter 1st class 0.08 Nos. 625.00 1 Each 50.00
Painter 2nd class 0.19 Nos. 515.00 1 Each 97.85
Cost of washable oil bound distemper 1.70 Ltrs 57.00 1 Ltr 96.90
Painter 1st class 0.36 Nos. 625.00 1 Each 225.00
Painter 2nd class 0.84 Nos. 515.00 1 Each 432.60
Add for MA @ 20% 0.20 805.45 161.09
Sundries including brushes, ladders etc., @ 0.01 1078.94
1%
1078.94
Overheads & Contractors Profit @ 13.615% 0.13615 1078.94 146.90
63 Painting to old walls with 2 coats of Acrylic based Oil bound Washable Distemper having VOC
content less than 50 grams/litre as approved by Engineer-In-Charge, to give an even shade after
(BLD-CSTN-11-10)
Unit = 10 Sqm
Cost of washable oil bound distemper 1.70 Ltrs 57.00 1 Ltr 96.90
Painter 1st class 0.36 Nos. 625.00 1 Each 225.00
Painter 2nd class 0.84 Nos. 515.00 1 Each 432.60
Add for MA @ 20% 0.20 657.60 131.52
Sundries including brushes, ladders etc., @ 0.01 886.02
1%
886.02
Overheads & Contractors Profit @ 13.615% 0.13615 886.02 120.63
65 Painting to old walls with 2 coats of water proof cement paint of shade as approved by the
Engineer-In-Charge
(BLD-CSTN-12-4) to give an even shade after thourughly brushing the surface to remove all dirt and
Water proof cement paint TBSC-G.II-04 3.50 Kgs 54.00 1 Kgs 189.00
Painter 1st class 0.15 Nos. 625.00 1 Each 93.75
Painter 2nd class 0.35 Nos. 515.00 1 Each 180.25
Mazdoor(unskilled) 1.50 Nos. 490.00 1 Each 735.00
Add for MA @ 20% 0.20 1009.00 201.80
Sundries including brushes, ladders etc., @
1% 0.01 1399.80
1399.80
Overheads & Contractors Profit @ 13.615% 0.13615 1399.80 190.58
Rate per 10 sqm 1590.38
Rate per 1 sqm 159.04
Or Say Say 159.00
64 Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic
emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than
50 grams/ liter for exterior walls including cost and conveyance of all materials to site, sales & other taxes,
incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of
work in all floors.
67 Painting primer coat on new wood work using red oxide Iron primer paint grade - 1 of approved
brand including cost and conveyance of all materials to site , all labour charges etc., and overheads &
contractors profit complete in all floors.(APSS No. 1201, 1212 & 1207).
(BLD-CSTN-12-7)
Unit : 10 sqm
A.MATERIALS :
Red oxide primer 0.70 Ltr 136.00 1 Ltr 95.20
B.LABOUR :
1st Class Painter 0.21 Nos. 625.00 1 Each 131.25
2nd Class Painter 0.49 Nos. 515.00 1 Each 252.35
Add for MA @ 20% 0.20 383.60 76.72
Sundries including brushes , ladders etc., @
1% 0.01 555.52
555.52
Overheads & Contractors Profit @ 13.615% 0.13615 555.52
75.63
Rate per 10 sqm 631.15
Rate per 1 sqm 63.12
Say 63.00
(BLD-CSTN-12-12-197)
Unit : 10 sqm
A.MATERIALS :
Cost of Synthetic Enamel Paint TBSC-G.V- 1.10 Ltr 201.00 1 Ltr 221.10
02
B.LABOUR :
1st Class Painter 0.33 Nos. 625.00 1 Each 206.25
2nd Class Painter 0.77 Nos. 515.00 1 Each 396.55
Add for MA @ 20% 0.20 602.80 120.56
Sundries including brushes , ladders etc., @ 0.01 944.46
1%
944.46
Overheads & Contractors Profit @ 13.615% 0.13615 944.46 128.59
66 Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less
than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all
materials to site, sales & other taxes, incidental, operational and all labour charges etc., and overheads &
contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).
67 Painting two coats with synthetic enamel paint Gr-I having VOC (Volatile Organic Compound)
content less than 50 grams/litre to old iron work including cost and conveyance of all materials to
site, sales & other taxes, incidental, operational and all labour charges and overheads & contractors
profit etc., complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).
(BLD-CSTN-12-12-198)
Unit : 10 sqm
A.MATERIALS :
Cost of Synthetic Enamel Paint TBSC-G.V- 0.90 Ltr 264.00 1
Ltr
01 237.60
B.LABOUR :
1st Class Painter 0.33 Nos. 625.00 1 Each 206.25
2nd Class Painter 0.77 Nos. 515.00 1 Each 396.55
Add for MA @ 20% 0.20 602.80 120.56
Sundries including brushes , ladders etc., @ 0.01 960.96
1%
960.96
68 Polishing two coats to teak wood doors using French spirit polish of approved brand for new
wood work to teak wood frame and shutters including sand papering to smooth surfaces etc. including
(BLD-CSTN-12-15)
A.Materials
French polish 0.228 Ltrs 198.00 1 Ltrs 45.14
cost of spirit 1.63 Ltrs 107.00 1 Ltrs 174.41
B.Labour
1st Class Painter 0.96 Nos. 625.00 1 Nos. 600.00
2nd Class Painter 2.24 Nos. 515.00 1 Nos. 1153.60
Add for MA @ 20% 0.20 1753.60 350.72
Sundries for terpentaine, sand paper, putty, 0.01 2323.87
wood filler, white woolen cloth, linseed oil,
cotton etc., @ 1%
2323.87
Overheads & Contractors Profit @ 13.615% 0.13615 2323.87 316.40
Supply & applying Poly-Urethane Water Proof Polish Glossy/ Matt finish to the wood works
duly cleaning
(As per the surface
Amendment and 2011-12)
in SoR applying emery paper, Sand the wood with 180 No., emery paper and
Unit : 1 sqm
A.Materials
Poly-Urethene polish Interior grade TBSC- 0.065 Ltrs 678.00 1 Ltrs 44.07
G.VII-02
Thinner for Poly Uretene polish 0.033 Ltrs 140.00 1 Ltrs 4.62
TBSC-G.I-14
B.Labour
1st Class Painter 0.24 Nos. 625.00 1 Nos. 150.00
2nd Class Painter 0.56 Nos. 515.00 1 Nos. 288.40
Helper 0.80 Nos. 490.00 1 Nos. 392.00
Add for MA @ 20% 0.20 830.40 166.08
Sundries for spraying machine etc., @ 1% 0.01 1045.17
1045.17
Overheads & Contractors Profit @ 13.615% 0.13615 1045.17 142.30
68 Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together
through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe
shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking
plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and
springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc.,
overheads & contractors profit complete for finished item of work as per special spn: 1108
Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100
mm
Ratecentre
as per,Bracers with flat iron 40x40x6 mm with 38
SSR TBSC-E.I-02 mmsqm
1.00 dia steel pulleys,
3640.00the top, bottom and side 3640.00
1 sqm
Overheads & Contractors Profit @ 13.615% 0.13615 3640.00 495.59
70 Providing and fixing of Expansion joint filler board for buildings, columns, beams and slabs 25 mm thick
including cost and conveyance of all materials to site, all incidental, operational, labour charges etc.overheads &
contractors profit complete for finished item of work as per approved drawing for all floors
Rate as per SSR 1.00 Sqm 385.00 1 Sqm 385.00
Overheads & Contractors Profit @ 13.615% 0.13615 385.00
52.42
Rate per 1 sqm 437.42
Say 437.00
1.70mts 1.80mts Alround M.S flat of
size 25 x 6mm
71 Providing and fixing of 24 gauge alluminium sheet over expansion joint groove of width 15cm fixed to walls /
columns at one edge and resting over the other block walls/columns concealing expansion joint with slotted holes
for free edge of aluminium sheet to facilitate free movement of aluminium sheet over the finished surface of
expansion joint and wall face using sheet metal screws with nylon receiver complete including cost and
conveyance of all materials to site, all incidental, operational, labour charges , overheads & contractors profit etc.,
complete for finished item of work as per approved drawing (for all floors for vertical joints and bottom of slab)
84.08
Say 84.00
Supplying and fixing aluminium composite cladding 4mm thick of approved make with skin
material 0.25
Rate as per mmTBSC-R.I-18
SSR thick aluminium sheet cover material
1.00 sqmnatural polyethylene
2736.00 aluminium cladding 2736.00
1 sqm
Overheads & Contractors Profit @ 13.615% 0.13615 2736.00
372.51
Rate per 1 sqm 3108.51
Say 3109.00
Supplying and fixing aluminium composite cladding 4mm thick of approved make with skin
material 0.50
Rate as per mmTBSC-R.I-19
SSR thick aluminium sheet cover material
1.00 sqmnatural polyethylene
3068.00 aluminium cladding 3068.00
1 sqm
Overheads & Contractors Profit @ 13.615% 0.13615 3068.00
417.71
Rate per 1 sqm 3485.71
Say 3486.00
vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement. Gasket made of Ethyl
Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be used. Wall fixing of sections
to concrete/masonry wall should be with self-expanding cap & screws. The rate is inclusive of cost and
conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and
scaffolding charges, form work , overheads & contractors profit etc., complete for finished item of work in all
floors.
Providing and Fixing Top Hung shutters in Structural Glazing fabricated from Roll formed
sections made
shutter. The rateof isPre-painted
inclusive ofSteel
cost /and
Powder coated of(Base
conveyance steel astoper
all materials IS all
site, 513 of ‘D’
labour quality,
charges,
incidental charges, cost
Rate as per SSR TBSC-N.II-02 of all consumables etc. and scaffolding
1.00 sqm charges,
6284.00form work, overheads
1 sqm & 6284.00
Overheads & Contractors Profit @ 13.615% 0.13615 6284.00
855.57
Rate per 1 sqm 7139.57
Say 7140.00
Supply and fixing of curtain Glazing made of pre painted steel (base steel as per IS 513 of 0.6 mm thick D
quality, galvanized as per IS 277 with Zinc of 120 GSM) Primer coated with epoxy primer of 5-7 microns thick,
finish painted with a polyester paint of 12- 16 microns thick and back coated with 5-7 microns thick alkyd backer.
Section for outer frame should be 46 x 52 mm, section for mullion should be 46 x 70 mm and section for beading
should be 18 x 25 mm. The Glazing should be paneled with 5 mm thick plain float Glass with Ethyl Propylene
diameine Monomer (EPDM) Gaskets. The sections are to be cut to length, mitre joined with corner bracket.
Centre mullions are to be fixed suing mullion cap. Handle made of high grade Aluminium powder coated and
nylon receiver. Gaskets made of Ethyl propylene Diamine Monomer (EPDM) Corner brackets made of CRCA with
zinc phosphating. Mullion caps made of Glass filled nylon. The above frames should be fixed to the concrete /
masonry wall be means of self expanding screws,overheads & contractor profit etc., complete for finished item in
all floors.
a) Fixed Glazing 2'-0" x 2'-0" (609.6x609.6mm) and 2'-0" x 3'-0" (609.6x914.4mm) grid outer frames section
size of 46 x 52mm
Rate as per SSR TBSC-N.I-01 1.00 sqm 6414.00 1 sqm 6414.00
Overheads & Contractors Profit @ 13.615% 0.13615 6414.00
873.27
Rate per 1 sqm 7287.27
Say 7287.00
b) Fixed Glazing 3'-0" x 3'-0" (914.4x914.4mm), 3'-0" x 4'-0" (914.4x1219.2mm) grid outer frames
section sizeSSR
Rate as per of 46TBSC-N.I-02
x 52 mm 1.00 sqm 5443.00 1 sqm 5443.00
Overheads & Contractors Profit @ 13.615% 0.14 5443.00
741.06
Rate per 1 sqm 6184.06
Say 6184.00
b) Providing and fixing perforated wall panels channeled wood works panels/ sheets of width 192 mm, thickness of
15 mm and length 2400 mm made of a moisture resistant fibre board substrate with a laminated facing as per the
approved shade/ species & finish and a melamine balancing layer on the reverse side, with a special perforation
pattern of helm holtz fluted perforation with consecutive 3 mm wide grooves followed by 21 mm of visible surface
with edges of panel shall be tongue and groove fitting to fix special clips for installation and seamless finish, the
back of the panel shall have hot pressed acoustic fleece to absorb noice/ sound absorbing to achieve NRC of 0.5
as per ASTM C423 and humidity resistance with minimum sag resistance of RH70, and a fire rating class of 2 as
per Part 7 of BS 476.
Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1)
using 12.5 mm thick
(BLD-CSTN-10-31 GypPage
& vide BoardNo.conforming
389 of to IS 2095 - 1993 fixing to Gyp steel GI perimeter
SoR 2011-12)
Unit - 1 Sqm
A) Material requirement as per India Gypsum 12.5mm Gypboard
1219mm x 1829mm size Boards 1.03 sqm 237.00 1 sqm 244.11
TBSC-K.I-03
GI Ceiling Angle - 25mm x 10mm x 0.5mm 0.64 RM 71.00 1 RM 45.44
TBSC-K.II-01
GI Ceiling section - 51.5mm x 26mm x 0.84 RM 82.00 1 RM 68.88
10.5mm x 0.55mm thick TBSC-K.II-02
Intermediate channel - 45mm x 15mm x 0.84 RM 81.00 1 RM 68.04
15mm x 0.9mm TBSC-K.II-03
Perimeter channel - 20mm x 27mm x 30mm 0.40 RM 71.00 1 RM 28.40
(web) of 0.55mm thick
TBSC-K.II-04
Connecting Clips TBSC-K.II-14 1.84 Nos. 4.00 1 No. 7.36
Rawl Plug TBSC-K.II-15 0.64 Nos. 4.00 1 No. 2.56
Soffit Cleats TBSC-K.II-17 0.64 Nos. 4.00 1 No. 2.56
TBSC-S.I-03 979.86
Scaffolding charges 1% 0.01 979.86 9.80
Rate per 1 sqm 989.66
Overheads & Contractors Profit @ 13.615% 0.13615 989.66 134.74
1124.40
Say 1124.00
72 Supplying and fixing Gyp board Fine line Grid false ceiling (GS-FLC-4.6)using 12.5mm thick Gyp Board
sheet tiles of size 595mm
(BLD-CSTN-10-32 x 595mm
& vide Page conforming
No. 390 of SoR to IS 2095 - 1992 fixing to Gyp steel precoated GI wall angle of
2011-12)
Unit - 1 Sqm
A) Material requirement as per India Gypsum
12.5mm Gypboard Tiles
595mm x 595mm TBSC-K.I-01 1.00 sqm 268.00 1 sqm 268.00
GI Angle - Precoated - 25mm x 25mm 0.40 RM 40.00 1 RM 16.00
x0.7mm TBSC-K.II-05
GI pre coated - T section - 3600mm long - 3.20 RM 53.00 1 RM 169.60
24mm x 38mm x 0.7mm thick TBSC-K.II-07
866.34
Scaffolding charges @ 1% 0.01 866.34 8.66
Basic Cost per 1 Sqm 875.00
Overheads & Contractors Profit @ 13.615% 0.13615 875.00 119.13
73 Providing and fixing in true horizontal level 14 mm - Mineral Fiber sheet 600 x 600 (Square / Tegular) edge
tiles with a Humidity Resistance of 90% RH,Average NRC 0.50, Light Reflectance >80%, Thermal Conductivity λ=
1063.90
Scaffolding charges 1% 0.01 1063.90 10.64
Basic Cost per 1 sqm 1074.53
Overheads & Contractors Profit @ 13.615% 0.13615 1074.53 146.30
73 Providing and fixing Thermocole False ceiling in true horizontal level 600mm x 600mm using
12mm thick Thermocole
(BLD-CSTN-10-34 & vide sheet, anodized
Page No. 392 of Aluminium Tee sections of size 24.50mm x 24.0mm x
SoR 2011-12)
Unit 1 Sqm
A) Material requirement
12mm Thermocole sheet TBSC-K.I-24 1.00 sqm 26.00 1 sqm 26.00
Aluminium angle - 24mmx 24mm 0.40 RM 26.00 1 RM 10.40
TBSC-K.II-12
Anodised Aluminium T section - 24mm x 3.20 RM 33.00 1 RM 105.60
24.5mm x 2.4mm TBSC-K.II-13
GI rod-prestraightened 2.0mm dia. - 1.28 Nos. 11.00 1 No. 14.08
Connecting rod TBSC-K.II-24
Rawl plugs TBSC-K.II-15 1.28 Nos. 4.00 1 No. 5.12
B) Labour charges
1st Class Carpenter 0.108 Nos. 645.00 1 No. 69.66
2nd Class Carpenter 0.108 Nos. 515.00 1 No. 55.62
Power Saw cutter - Hand Operated - 0.02 Nos. 540.00 1 No. 10.80
Operator
Power Drill - Hand Operated - Operator 0.04 Nos. 540.00 1 No. 21.60
Unskilled Mazdoor 0.20 Nos. 490.00 1 No. 98.00
Add for MA @ 20% 0.20 255.68 51.14
C) Machinery
Power Saw cutter - Hand Operated - Hire 0.16 Hours 137.00 1 No. 21.92
Charges
Power Drill - Hand Operated - Hire Charges 0.32 Hours 128.00 1 No. 40.96
530.90
Scaffolding charges 1% 0.01 530.90 5.31
Basic Cost per 1 Sqm 536.20
Overheads & Contractors Profit @ 13.615% 0.13615 536.20 73.00
74 Supplying and fixing 50mm dia nominal bore Medium Grade properties & weight as per IS 1239
ISI
Costmark MSTube
of MS TubeTBSC-E.I-15
for fixing of GI Sheet including cost
5.03and
Kgsconveyance of all materials1 to
65.00 Kgswork site 326.95
Labour charges for fabrication 5.03 Kgs 33.00 1 Kgs 165.99
TBSC-T.I-16
Labour charges for fixing TBSC-T.I-17 5.03 Kgs 5.00 Kgs 25.15
Add for MA @ 20% 0.20 91.55 18.31
Rate per 1 RM 536.40
Overheads & Contractors Profit @ 13.615% 0.13615 536.40 73.03
609.43
Say 609.00
75 Roofing with corrugated G.I sheets 0.80mm thick fixed with G.I ‘J’ bolts & nuts 8 mm dia with
bitumen
Unit : 10&sqmG.I limpet washers filled with white lead & including a coat of approved steel primer and
A. MATERIALS:
G.I corrugated 0.80 mm thick sheets TBSC- 103.09 Kgs 63.00 1 Kg 6494.67
D.VI-04
G.I scam bolts & nuts 2 x 27 (laps) x 17 = 47.91 Nos. 7.00 1 No. 335.37
884 TBSC-D.VI-14
G.I ‘J’ bolts 8 mm dia 2 x 5 x 27 sheets x 3 43.9 Nos. 11.00 1 No. 482.90
nos = 810 nos. with washers or srews, if
wooden battens used. TBSC-D.VI-16
Limpet washers (for scam & ‘J’ bolts) 884 + 91.82 Nos. 3.00 1 No. 275.46
810 = 1694 TBSC-D.VI-18
Bitumen washers TBSC-D.VI-19 91.82 Nos. 3.00 1 No. 275.46
Zinc cromate yellow paint TBSC-G.I-06 0.14 Ltrs 215.00 1 Ltr 30.10
Ready mixed paint TBSC-G.V-01 0.2 Ltrs 264.00 1 Ltr 52.80
B. LABOUR
For roofing
Carpenter II class 0.84 Nos. 515.00 1 No. 432.60
Man mazdoor (beldar) 0.91 Nos. 490.00 1 No. 445.90
For primer painting one coat
Painter 1st class 0.018 Nos. 625.00 1 No. 11.25
Painter 1st class 0.042 Nos. 515.00 1 No. 21.63
Mazdoor (coolie) 0.06 Nos. 490.00 1 No. 29.40
For two coats of painting to over laps
Painter 1st class 0.042 Nos. 625.00 1 No. 26.25
Painter 1st class 0.098 Nos. 515.00 1 No. 50.47
Mazdor (coolie) 0.14 Nos. 490.00 1 No. 68.60
Add for MA @ 20% 20% 1086.1 217.22
Rate per 10 sqm 9250.08
Rate per 1 sqm 925.01
Overheads & Contractors Profit @ 13.615% 0.13615 925.008 125.94
76 Supplying and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm
thickness,
Unit : 10 sqmCoating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular
A. MATERIALS:
Galvalume sheet 0.50mm thick 10.50 sqm 407.00 1 sqm 4273.50
TBSC-D.VI-05
G.I scam bolts & nuts 2 x 27 (laps) x 17 = 47.91 Nos. 7.00 1 No. 335.37
884 TBSC-D.VI-14
G.I ‘J’ bolts 8 mm dia 2 x 5 x 27 sheets x 3 43.90 Nos. 11.00 1 No. 482.90
nos = 810 nos. with washers or srews, if
wooden battens used. TBSC-D.VI-16
Limpet washers (for scam & ‘J’ bolts) 91.82 Nos. 3.00 1 No. 275.46
TBSC-D.VI-18
Bitumen washers TBSC-D.VI-19 91.82 Nos. 3.00 1 No. 275.46
B. LABOUR
For roofing
Carpenter II class 0.84 Nos. 515.00 1 No. 432.60
Man mazdoor (beldar) 0.91 Nos. 490.00 1 No. 445.90
Add for MA @ 20% 0.20 878.50 175.70
77 Supply and delivery of encapsulated plastic steps manufactured as per companies standard specification
including cost of materials packing as per companiess standards, loading, transportation, unloading and stacking
at site of work , and taxes such as complete sales tax,C.E.D and others etc., as applicable including labour
charges for fixing etc. complete for finished item of work.
221.55
Say 222.00
1 Supplying & fixing 602 x 602 mm CI man hole frame and cover (light weight) 30 Kgs including cost and
conveyance and labour charges for fixing, overheads and contractor profit etc., complete for finished item of work
3818.60
Say 3819.00
78 Supply and fixing ornamental MS Main gate of size 9mts x 3.75 mts ( average height) i.e., varying from 3mts to
4.50 mts at75mm
MS Angle centre as per xthe
x 75mm approved drawing using
6mm MSRM
17.50 Angle of 75mm
6.80x 75mm x 6mm alround
Kgs/RM for frame
119.00 Kgsand
MS Flat 63 x 6mm 24.50 RM 3.00 Kgs/RM 73.50 Kgs
25mm MS Square Rods 131.25 RM 4.91 Kgs/RM 644.44 Kgs
836.94 Kgs
CI Spokes 9" Long-2kg/each-38 Nos and 6'
long 1 kg / each 76 nos 152.00 Kgs
Cost Analysis
Cost of MS Angles 119.00 Kgs 50000.00 1 MT 5950.00
Cost of MS Flats 73.50 Kgs 52000.00 1 MT 3822.00
Cost of MS Square Bars 644.44 Kgs 50000.00 1 MT 32221.88
Cost of CI spikes 152.00 Kgs 50.00 1 Kgs 7600.00
Pin clamps for fixing gate to columns 6 Nos. 450.00 1 Each 2700.00
MS Aldrop 450mm long ( Special ) 2 Nos. 750.00 1 Each 1500.00
MS Tower bolts 450 mm long (Special ) 2 Nos. 450.00 1 Each 900.00
LS for brass emblem and embossed cover 1000.00
Add for Red Oxide painting to gate 16.875 Sqm 555.52 10 Sqm 937.44
Applying Black paint 16.875 Sqm 944.46 10 Sqm 1593.78
Labour charges for fabrication 988.94 Kgs 33.00 1 Kg 32634.94
Labour charges for fixing 988.94 Kgs 5.00 1 Kg 4944.69
Add for MA @ 20% 0.20 17998.66 3599.73
Add cost of rollers 4 Nos. LS 2000.00
Add for conveyance to work spot 237.53
101641.98
Overheads & Contractors Profit @ 13.615%
0.13615 ### 13838.56
Rate for 33.75 sqm 115480.53
Rate for 1 sqm 3421.65
Say 3422.00
79 Supply and fixing ornamental MS Wicket gate Size 1.50m x 3.00m as per the approved drawing using 75mm x
75mm x 6mm
MS Angle 75mmMSx 75mm
angle alround
x 6mm for frame and 63mm x 6mm
9.00 RM MS flats 6.80
in 6 rows horizontally, 25mm
Kgs/RM 61.20 MS Kgs
square
MS Flat 80x6mm 6 RM 3.56 Kgs/RM 21.36 Kgs
25mm MS Square bars 33 RM 4.91 Kgs/RM 162.03 Kgs
244.59 Kgs
CI Spokes 9" Long-2kg/each-12 Nos 24.00 Kgs
CI Spokes 6" Long-1kg/each-24 Nos 24.00 Kgs
Cost Analysis
Cost of MS Angles 61.20 Kgs 50000.00 1 MT 3060.00
Cost of MS Flats 21.36 Kgs 52000.00 1 MT 1110.72
80 Providing cattle trap including cost of excavation of trap pit and laying 100 mm hick PCC (1:5:10) prop bed in
1:50 slopetrap
for Cattle using 40 mm
of size HB Granite metal including5.423
3.74mx1.45m constructing
Sqm 230 mm thick walls alround and middle in PCC
Earth work excavation 5.35 Cum 2431.72 10 Cum 1300.97
PCC (1:5:10) 1.34 Cum 3149.65 1 Cum 4220.52
PCC M 20 nominal mix for wall around 0.45
M 1.20 Cum 4590.49 1 Cum 5508.59
Cost of 25mm dia MS bars 239.66 Kgs 50000.00 1 MT 11983.00
RS joints 125mm x 75mm @ 11.90 Kgs 154.11 Kgs 52000.00 1 MT 8013.72
Structural steel 71.00 Kgs 50000.00 1 MT 3550.00
Labour charges for fabrication 464.77 Kgs 33.00 1 Kg 15337.41
Labour charges for fixing 464.77 Kgs 5.00 1 Kg 2323.85
Add for MA @ 20% 0.20 8458.81 1691.76
20mm thick plastering 12.70 Sqm 204.87 1 Sqm 260.18
50mm dia GI pipe 'B' class 47.70 RM 455.40 1 RM 21722.58
Labour charges for making suitable
arrangement for drainage etc and
transportation to site LS 214.54
Rate per 5.423 Sqm 76127.14
Rate per 1 Sqm 14037.83
14038.00
74 Drilling holes in hard granite or sheet rock with uising Pneumatic Compressor 20mm dia as applicable
including labour charges etc. complete for finished item of work as directed by the Engineer-in-Charge .
151.11
Say 151.00
75 Grouting the holes with neat cement slurry excluding cost of steelr 20mm dia as applicable including labour
charges etc.S.S.R.
Rate as per complete
S. for finished item of work as directed by the Engineer-in-Charge
1 RM 84.00 . 1 RM 84.00
Rate per each 84.00
Overheads & Contractors Profit @ 13.615% 0.13615 84.00 11.44
95.44
Say 95.00
74 Supplying and fabricating, erecting and fixing in position tabular trusses of approved design with M.S tube
conforming to I.S-1161 specifications including roof frame work consisting of rafters,ties struts and purlins
including cost of foundations bolts, cleats, bearings plates,etc.,complete as per the sketch enclosed and
including cost of primary coat with red oxide paint including cost and conveyance of all materials, labour charges
for erecting & fixing all structural steel works erecting in position and fixing by using chain pulley blocks, Derek
pole arrangements and cranes etc., complete in position, labour charges for fabrication, all incidental charges,
overheads and contractor profit etc., complete for finished item of work as directed by the Engineer-in-Charge
138882.98
Rate per 1 MT 138883.00
Rate per KG 138.88
Or Say KG 139.00
1 Supplying, fabricating, hoisting,erecting in position structural steel works comprising of trusses, lattice girders,
brackets, column, bracing, rafters and other connected works with necessary joints, channels, angles, I-section,
plates, bolts and nuts, washers as showin in the detailed approved drawings including cutting, welding, hoisting
and painting redoxide primer one coat before erection including cost and conveyance of all materials, labour
charges for fabrication erection at site work for all heights etc., complete as directed by the Engineer-in-Charge.
103435.10
Rate per 1 MT 103435.00
1 Supplying and Fixing M.S. Chequered Plates of 10mm thickness with MS angles of approved sizes for cable
trenches wherever required, at all levels, etc, complete, as per standard specifications / approved detailed
drawings and as directed by engineer-in-charge including painting with synthetic enamel paint two coats over a
primary coat of red oxide including cost and conveynace of all materials & labour charges overheads and
contractor profit etc., complete for finished item of work
115.75
Rate per 1 MT 116.00
75 Supplying and fabricating, erecting and fixing in position trusses of approved design with structural steel
other than MS circular tubes including roof frame work consisting of rafters, ties struts and purlins including cost of
foundations bolts, cleats, bearings plates,etc.,complete as per the sketch enclosed and including cost of primary
coat with red oxide paint including cost and conveyance of all materials, labour charges for erecting & fixing all
structural steel works erecting in position and fixing by using chain pulley blocks, Derek pole arrangements and
cranes etc., complete in position, labour charges for fabrication, all incidental charges, overheads and contractor
profit etc., complete for finished item of work as directed by the Engineer-in-Charge
76 Construction of Granular sub-base by providing HBG material confirming to Grading - III of MORT & H
Table 400-2 including cost, seigniorage charges and conveyance of all material to woek site and spreading in
RBR-SBBS-12
uniform layers with motor grader or by approved means, on prepared surface mixing by mix place method with
Rotavator/ approved means, at OMC and compacting with vibratory roller to achieve the desired density etc.,
complete for finished item of work as per MoRT& H specification 401 (4th revision) and as directed by the
Engineer- in - charge (Payment will be made based on levels for finished item of work)
Unit : 1 cum
Taking output : 300 cum
a) Labour
Mate day 1 day 0.00
Mazdoor skilled 2.40 day 490.00 1.00 day 1176.00
Mazdoor unskilled 8.00 day 490.00 1.00 day 3920.00
Add for MA @ 20% 20% 5096.00 1019.20
b) Machinery
Vibratory roller 8T 6.00 hr 3292.40 1 hr 19754.40
Water tanker 6 KL 5.00 hr 699.00 1 hr 3495.00
Tractor with grader @ 25cum per hour 12.00 hr 473.00 1 hr 5676.00
Tractor with Rotavator 12.00 hr 473.00 1 hr 5676.00
c) Material
(BLD-CSTN-3-11)
Unit : 1cum
A.MATERIALS :
HBG 20mm size metal 0.80 Cum 1055.26 1 Cum 844.21
Sand 0.40 Cum 600.00 1 Cum 240.00
Cement 350.00 Kgs 5600.00 1000 Kgs 1960.00
Water ( including for curing ) 1.20 Kl 98.00 1 Kl 117.60
B.MACHINERY :
Batching plant 0.50 cum 0.308 hour 249.00 1 hour 76.69
Crew charges 0.308 hour 426.70 1 hour 131.42
Needle vibrator 40mm ( petrol ) 1.000 hours 32.60 1 hour 32.60
Crew charges 1.000 hours 204.90 1 hour 204.90
Add for MA @ 20% 20% 336.32 67.26
C.LABOUR :
1st class mason 0.100 Nos. 545.00 1 Each 54.50
Mazdoor (Unskilled) 1.390 Nos. 490.00 1 Each 681.10
Add for MA @ 20% 20% 735.60 147.12
Rate per 1 cum 4557.41
Rate for other Floors FF
Cost of M 20 design mix 4557.41
Hire charges of centering and scaffolding 67.00
Lift charges for scaffolding 370.00
Add for MA @ 20% 74.00
Lift charges ( Page 131 of Std. Data ) 0.00
Add for MA @ 20% 0.00
Rate per 1 cum 5068.41
Overheads&Contractors Profit @13.615% 690.06
Rate per 1 cum 5758.47
Say 5758
Providing, Laying, Spreading and compacting graded HBG/HBG crushed stone aggregate to Wet Mix macadem
specification including cost of all materials and including premixing the material with water at OMC in Mechanical
mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well
prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the
Engineer-in-Charge and as per MoRT&H specification.406 (5th revision) for finished item of work. (Payment
based on levels for finished item of work)
fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates
including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using
needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and
expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge /
culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound
(where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501
MORD.
Unit = cum
Taking output = 75 cum (172.50 t)
(100 x 3.75 x 0.200)
a) Labour
Mate day -
Mason 1st Class 5.00 day 545.00 1 day 2725.00
Mason (2nd class) 5.00 day 515.00 1 day 2575.00
Mazdoor (Unskilled) 150.00 day 490.00 1 day 73500.00
Mazdoor (Skilled) 6.00 day 490.00 1 day 2940.00
Surveyor 2.00 day 885.00 1 day 1770.00
Mazdoor ( semi skilled) 6.00 day 490.00 1 day 2940.00
Blacksmith for cutting of dowel bars including
removal of burrs, fabrications & fixing of
dowel bars. 1.00 day 540.00 1 day 540.00
Add for MA @ 20% 20% 86990.00 17398.00
b) Machinery
Concrete mixer 0.28 / 0.4 cum capacity (6
mixers) with weigh batcher and suitable
capacity calibrated water tank 36.00 hour 180.80 1 hour 6508.80
crew charges 36.00 hour 284.70 1 hour 10249.20
Add for MA @ 20% 20% 10249.20 2049.84
Needle vibrator hire charges 9.00 hour 32.60 1 hour 293.40
crew charges 9.00 hour 204.90 1 hour 1844.10
Add for MA @ 20% 20% 1844.10 368.82
Screed vibrator hire charges (Sl.No.47 of
I&CAD Hire charges) 9.00 hour 19.30 1 hour 173.70
crew charges 9.00 hour 296.40 1 hour 2667.60
Add for MA @ 20% 20% 2667.60 533.52
Plate vibrator (Sl.No.45 0f Hire charges) 9.00 hour 219.80 1 hour 1978.20
crew charges 9.00 hour 154.40 1 hour 1389.60
Add for MA @ 20% 20% 1389.60 277.92
Concrete joint cutting machine for initial &
final cuts- hire charges (Sl.No.33 of Hire
charges) 4.00 hour 419.10 1 hour 1676.40
crew charges 4.00 hour 197.60 1 hour 790.40
Add for MA @ 20% 20% 790.40 158.08
Water tanker 6 kl capacity) 5.00 hour 699.00 1 hour 3495.00
Air Compressor 2 hour 607.60 1 hour 1176.80
c) Material
Crushed stone coarse aggregates, grading
will be as per Clause 1501.2.4.1 (Table
1500.1) of specifications @ 0.90 cum/cum of
concrete (25 mm & 12.5 mm blending)
67.50 cum 1000.76 1 cum 67550.96
Sand as per IS:383 and conforming to
Clause 1500.2.4.2 @ 0.45 cum/cum of
concrete 33.75 cum 600.00 1 cum 20250.00
Cement 26.25 t 5600.00 1t 147000.00
Polythene sheet 125 micron 412.50 sqm 18.00 1 sqm 7425.00
Mild steel dowel bar 25 mm dia of grade S
240. 500 mm long 20 Nos. at culvert/bridge
slab and at construction joint including 5 per
cent wastage.
(4 x 20 x 0.500) + 5 per cent wastage = 42
m @ 2.80 kg per m = 117.6 kg. 0.12 t 45900.00 1 MT 5397.84
97845.24
Rate per 1 MT Say 97845.00
Rate per KG 97.85
Or Say KG 98.00
77 Cutting of holes for beams, slabs and walls for plumbing lines including cost and conveyance of all
materials to site, quotation
As per approved labour charges, overheads & contractors profit complete for finished item of work at 475.00
Rate per 1 each 475.00
1 Supply and fixing of wire mesh(chiken mesh) at joint of RCC and brick work(internal and
external
Rabbit walls)
wire mesharea with nails
(chicken mesh)overheads
of not less& contractors profit etc., 20.00
1.00 Sqm complete 1 Sqm 20.00
than 30 gauge -TBSC-E.I-12
Overheads & Contractors Profit @ 13.615% 0.13615 20.00 2.72
22.72
Labour charges for fixing of chiken mesh(as 1.00 Sqm 1 Sqm 113.00
per quotation) 113
Add for MA @ 20% 20% 113.00 22.60
Rate per 1 sqm 158.32
158.00
1 Drilling holes of 25 mm dia and 800mm deep in hard rock or sheet rock with pneumatic compressor and
placing of 20mm dia Tor steel bars and grouting the holes in CM(1:2) prop. excluding cost of steel and its
fabrication charges but including cost and conveyance of all materials and labour charges etc.,and overheads &
contractors profit complete for finished item of work.
Unit : 1RM
Drilling holes as per item Sl No.143, item 1.00 RM 144.00 1 RM 144.00
No. 7 b II) (R&B)
Overheads & Contractors Profit @ 13.615% 0.13615 144.00 19.61
163.61
Say 164
1 Grouting the holes with neat cement slurry excluding cost of steel but including cost and conveyance of all
materials and labour charges etc.,and overheads & contractors profit complete for finished item of work
Unit : 1RM
Drilling holes as per item Sl No.146, item 1.00 RM 105.00 1 RM 105.00
No. 8 II) (R&B)
119.30
Say 119
1 Clearing Juliflora (Prosafis) jungle including up-rooting and removing of Juliflora stumps including all
labour charges.
Basic rate as per item No.112.d 1.00 SQM 3.50 1 SQM 3.50
Overheads & Contractors Profit @ 13.615% 0.13615 3.50 0.48
3.98
Say 3.980
1 Providing and fixing of PVC water stopper bars(230mm width x 10mm thick) for buildings,
beams and slabs including cost and conveyance of all materials to site, all incidental,
Unit : 1RM
Rate as per SSR 1.00 RM 295.00 1 RM 295.00
Overheads & Contractors Profit @ 13.615% 0.13615 295.00 40.16
335.16
Say 335
5.49
33.332
5.49
99.96 6
99.96
7F 8F 9F
5.49
5.49
66.664
7F 8F 9F
642.31 642.31 642.31
166.00 166.00 166.00
299.00 318.00 337.00
59.80 63.60 67.40
15.96 17.02 18.09
7F 8F 9F
698.16 698.16 698.16
166.00 166.00 166.00
299.00 318.00 337.00
59.80 63.60 67.40
120.96 141.11 161.27
24.19 28.22 32.25
1368.11 1415.10 1462.09
186.27 192.67 199.06
7F 8F 9F
977.42 977.42 977.42
171.00 171.00 171.00
7F 8F 9F
642.31 642.31 642.31
166.00 166.00 166.00
299.00 318.00 337.00
59.80 63.60 67.40
0.00 0.00 0.00
-1.83
3 0.4998
-0.61
7F 8F 9F
977.42 977.42 977.42
171.00 171.00 171.00
307.00 326.00 346.00
61.40 65.20 69.20
164.50 191.92 219.33
32.90 38.38 43.87
1714.22 1769.92 1826.82
233.39 240.97 248.72
7F 8F 9F
977.42 977.42 977.42
171.00 171.00 171.00
307.00 326.00 346.00
61.40 65.20 69.20
174.18 203.21 232.23
7F 8F 9F
977.42 977.42 977.42
171.00 171.00 171.00
307.00 326.00 346.00
61.40 65.20 69.20
0.00 0.00 0.00
7F 8F 9F
663.23 663.23 663.23
10.86 10.86 10.86
321.80 360.66 399.53
64.36 72.13 79.91
119.01 138.85 158.68
23.80 27.77 31.74
1203.06 1273.50 1343.94
163.8 173.39 182.98
1.008
7F 8F 8F
415.34 415.34 415.34
1.09 1.09 1.09
32.18 36.07 39.95
6.44 7.21 7.99
7F 8F 9F
204.87 204.87 204.87
1.09 1.09 1.09
32.18 36.07 39.95
6.44 7.21 7.99
76.09 88.77 101.45
15.22 17.75 20.29
335.89 355.76 375.64
45.73 48.44 51.14
60.48
7F 8F 9F
5368.85 5368.85 5368.85
1606.44 1874.18 2141.92
321.29 374.84 428.38
7296.57 7617.86 7939.15
993.43 1037.17 1080.92
7F 8F 9F
9283.74 9283.74 9283.74
1976.28 2305.66 2635.04
395.26 461.13 527.01
11655.27 12050.53 12445.79
1586.87 1640.68 1694.49
7F 8F 9F
6279.52 6279.52 6279.52
1917.48 2237.06 2556.64
383.50 447.41 511.33
8580.49 8963.99 9347.49
1168.23 1220.45 1272.66
7F 8F 9F
5957.33 5957.33 5957.33
1917.48 2237.06 2556.64
383.50 447.41 511.33
8258.30 8641.80 9025.30
1124.37 1176.58 1228.79
7F 8F 9F
5884.38 5884.38 5884.38
7F 8F 9F
4832.16 4832.16 4832.16
486.99 568.16 649.32
97.40 113.63 129.86
5416.55 5513.95 5611.34
737.46 750.72 763.98
7F 8F 9F
9231.80 9231.80 9231.80
1976.28 2305.66 2635.04
395.26 461.13 527.01
11603.34 11998.59 12393.85
1579.79 1633.61 1687.42
7F 8F 9F
17327.90 17327.90 17327.90
2436.00 2842.00 3248.00
487.20 568.40 649.60
20251.10 20738.30 21225.50
2757.19 2823.52 2889.85
1 Earth work excavation for foundations (Mechanical 194.00 CUM 1 ONE CUM 119.00
Means) for buildings in ordinary soils and
depositing on bank for all lifts and with an initial
lead of 10m and up to 3m depth including all
operational, incidental, labour charges such as
shoring, sheeting, planking, strutting etc., and
overheads & contractors profit complete for finished
item of work excluding dewatering charges etc., as
per SS 20 B(APSS 308).
3 Plain Cement Concrete (1:4:8) (cement: fine 1443.00 CUM 1 One CUM 3785.00
aggregate: Coarse aggregate) for foundations
and under flooring bed using coarse aggregate
40mm size hard , machine crushed granite from
approved quarry including cost and conveyance of
all materials like cement, sand, coarse aggregate,
water etc. to site, including sales & other taxes on
all materials and including all charges for machine
mixing, laying concrete in foundations and under
flooring bed, ramming in 15 cm layers finishing top
surface to the required level curing etc., and
overheads & contractors profit complete for finished
item of work. (APSS No. 402)
4 Plain Cement Concrete (1:5:10) (cement: fine 189.00 CUM 1 ONE CUM 3578.00
aggregate: Coarse aggregate) for foundations
and under flooring bed using coarse aggregate
40mm size hard , machine crushed granite from
approved quarry including cost and conveyance of
all materials like cement, sand, coarse aggregate,
water etc. to site, sales & other taxes on all
materials and including all charges for machine
mixing, laying concrete in foundations and under
flooring bed, ramming in 15 cm layers finishing top
surface to the required level curing etc.,and
overheads & contractors profit complete for
finished item of work. (APSS No. 402)
5 Plain Cement Concrete M 20 design mix using 258.00 CUM 1 ONE CUM 5758.00
WEIGH BATCHER / MIXER, 20mm size hard
granite machine crushed graded metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part
1 to Part 8) from approved quarry, using a minimum
quantity of 350 kgs. of cement per 1 cum of
concrete including cost and conveyance of all
materials like cement, fine aggregate (Sand),
coarse aggregate, water etc., to site including steel
centering, shuttering, machine mixing, lift charges,
laying concrete,vibrating, curing, overheads &
contrctors profit etc., complete for finished item of
work (APSS No. 402 & 403) for Kerb stone..
6 Plain Cement Concrete (1:3:6) nominal mix 108.00 CUM 1 ONE CUM 4154.00
using 40mm size machine crushed hard granite
metal (coarse aggregate) in (2:1) ratio from
approved quarry including cost and conveyance of
all materials like cement, fine aggregate (sand),
coarse aggregate, water etc. to site, sales & other
taxes on all materials, all charges for mixing, laying
concrete in position, curing charges, overheads &
contractors profit etc., for finished item of work for
Central Median
7 Plain Cement Concrete M 20 design mix using 50.00 CUM 1 ONE CUM 6608.00
Concrete Batching Plant, 20mm size hard granite
machine crushed graded metal (coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of
330 kgs. of cement per 1 cum of concrete including
cost and conveyance of all materials like cement,
fine aggregate (Sand), coarse aggregate, water
etc., to site including steel centering, shuttering,
machine mixing, lift charges, laying
concrete,vibrating, curing, overheads & contrctors
profit etc., complete for finished item of work
(APSS No. 402 & 403) for Saucer drain
8 Flooring with chequered cement concrete heavy 2044.00 SQM 1 ONE SQM 815.00
duty tiles confirming to IS:13801 using aggregates,
cement, pigments of size 300mm x 300mm and
thickness 25mm of any shade as approved by
Engineer-In-Charge set over base coat of cement
mortar (1:6), 12 mm thick using screened sand over
CC bed alredy laid or RCC roof slab including neat
cement slurry of honey like consistency spread @
3.3 kgs per sqm and jointed with neat white cement
to full depth mixed with pigment of matching shade
including cost and conveyance of all materials like
cement, sand, water and tiles etc.,and overheads &
contractors profit complete for finished item of work.
10 Painting two coats after filling the surface with 1125.00 SQM 1 ONE SQM 170.00
synthetic enamel paint in all shades on new
plastered concrete surface as per Technical
Specification 800 of MORT&H (5th Revision) and
as directed by the Engineer-in-Charge.
23086
2897216
5461755
676242
1485564
448632
330400
1665860
14764680
191250
27944685.00
Detailed Estimate for CC Road
S.NO DESCRIPTION NOS L B D QUANTITY
1a Length of Road with Central Median
Type-I(with median)
R1 2.00 131.78 263.56
R2 2.00 158.94 317.88
Add for variations 20.00
601.45
Say 601.00
1b Type-II 7.00m wide road
R5 1.00 159.00 159.00
R6 1.00 221.70 221.70
R7 1.00 65.16 65.16
R8 1.00 81.92 81.92
R9 1.00 92.38 92.38
R10 1.00 107.75 107.75
R11 1.00 106.81 106.81
Add for variations 25.04
859.76
Say 860.00
2 Stabilization Layer
15.50m Wide road 2 601.000 7.00 0.300 2524.20
7.00m Wiide road 1 860.000 7.00 0.300 1806.00
4330.20
Say 4330.00
3 Embankment Layer
R1 2 131.78 7.00 0.100 184.49
R2 2 158.94 7.00 0.200 445.03
R5 1 159.00 7.00 0.750 834.75
R6 1 221.70 7.00 0.800 1241.53
R7 1 65.16 7.00 0.500 228.07
2933.88
` Say 2934.00
159.53
Say 160.00
7 Kerb stone
Above ground level
15.50m Wide road 2 601.000 0.25 0.200 60.10
R5 2 159.00 0.25 0.200 15.90
R6 2 221.70 0.25 0.200 22.17
98.17
Say 98.00
8 Saucer drain
Area of saucer drain 0.017 Sqm
15.50m Wide road 2 601.000 0.017 20.43
7.00m Wiide road 2 860.000 0.017 29.24
49.67
Say 50.00
9 Painting to Kerb wall
15.50m Wide road 2 601.000 0.200 240.40
R5 2 159.00 0.200 63.60
R6 2 221.70 0.200 88.68
392.68
Say 393.00
FOOTPATH
10 PCC (1:5:10)
15.50m Wide road 2 300.500 1.50 0.075 67.61
R5 2 159.00 1.50 0.075 35.78
R6 2 221.70 1.50 0.075 49.88
153.27
Say 153.00
11 Pavement Tiles for foot path
15.50m Wide road 2 300.500 1.50 901.50
R5 2 159.00 1.50 477.00
R6 2 221.70 1.50 665.10
2043.60
Say 2044.00
MEDIAN
12 Earth work excavation
15.50m Wide road 1 601.000 0.30 0.400 72.12
72.12
Say 72.00
13 PCC (1:5:10)
15.50m Wide road 2 601.000 0.30 0.100 36.06
36.06
Say 36.00
14 V.P.C.C.(1:3:6)
15.50m Wide road 2 601.000 0.15 0.600 108.18
108.18
Say 108.00
15 Painting to V.P.C.C
15.50m Wide road 2 601.000 0.500 601.00
601.00
Say 601.00
QUANTITY
RM
RM
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
SQM
Cum
SQM
Cum
Cum
Cum
Sqm
ABSTRACT ESTIMATE FOR STORM WATER DRAIN
1 Earth work excavation for foundations (Mechanical 1145.00 CUM ONE CUM 119.00 136255
Means) for buildings in ordinary soils and depositing on
bank for all lifts and with an initial lead of 10m and up to
3m depth including all operational,incidental, labour
charges such as shoring, sheeting, planking, strutting etc.,
and overheads & contractors profit complete for finished
item of work excluding dewatering charges etc., as per SS
20 B(APSS 308)
2 Plain Cement Concrete (1:5:10) (cement: fine aggregate: 104.00 CUM ONE CUM 3578.00 372112
Coarse aggregate) for foundations and under flooring bed
using coarse aggregate 40mm size hard , machine
crushed granite from approved quarry using concrete
Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and
conveyance of all materials like cement, sand, coarse
aggregate, water etc. to site including all charges for
machine mixing and hire charges of concrete mixer, laying
concrete in foundations and under flooring bed, ramming
in 15 cm layers finishing top surface to the required level
curing etc.,and overheads & contractors profit complete
for finished item of work. (APSS No. 402)
3 Supply and placing of the Design Mix Concrete M 25 131.00 Cum ONE Cum 10041.00 1315371
grade corresponding to IS 456 with minimum cement
content of 380 kgs per 1 cum of concrete using batching
and mixing plant of 15 cum per hour capacity with 20mm
size graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to
Part 8) from approved quarry including cost and
conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site and sales &
other taxes on all materials , centering using Steel
scaffolding pipes , jack props , wallers , Foot plates ,
brackets , steel centering plates etc., including all
operational, incidental and labour charges such as weigh
batching, machine mixing, laying concrete, curing etc., and
overheads & contractors profit complete but excluding cost
of steel and its fabrication charges for finished item of
work (APSS No. 402).
4 Supply and placing of the Design Mix Concrete M 25
grade corresponding to IS 456 with minimum cement
content of 380 kgs per 1 cum of concrete using batching
and mixing plant of 15 cum per hour capacity with 20mm
size graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to
Part 8) from approved quarry including cost and
conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering
using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all
operational, incidental and labour charges ,transporting
concrete using transit mixer, lifting concrete mechnically,
laying concrete using concrete pump, vibrating, curing ,
overheads & contractors profit etc., complete but
excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402)
ii 125mm thick Drain side walls 1558.00 SQM ONE SQM 2473.00 3852934
5 Reinforced Cement Concrete M 20 nominal mix using 1315.00 SQM ONE SQM 1724.00 2267060
12mm size hard granite machine crushed graded metal
(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part
1 to Part 8) from approved quarry, using a minimum
quantity of 350 kgs. of cement per 1 cum of concrete
using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity
including cost and conveyance of all materials like
cement, fine aggregate (Sand), coarse aggregate, water
etc., to site including centering, shuttering, labour charges
such as weigh batching, machine mixing, hire charges of
concrete mixer, laying concrete, lift charges, curing etc.,
and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for 125mm thick
precast slabs.
6 Providing Thermo Mechanically Treated (TMT) (Fe 500 / 25.80 MT ONE MT 81728.00 2108582
Fe 500 D grade as per IS 1786-1979) of different
diameters for RCC works including labour charges for
straightening, cutting, bending to required sizes and
shapes, placing in position with cover blocks of approved
materials and size and tying and lap-splicing with binding
wire of 18 SWG, forming grills for reinforcement work as
per approved designs and drawings, including cost and
conveyance of steel bars, including all wastages such as
overlaps, couplings, chairs, spacer bars including cost and
conveyance of binding wire, cover blocks and all
incidental, operational, labour charges such as cutting,
bending, placing in position, tying etc., and overheads &
contractors profit complete for finished item of work.
( APSS No.126)
a SD3
1 675.72 675.72
675.72
Say 676.00 RM
b SD4
R4 2 290.72 581.45
1 159.00 159.00
740.45
Say 740.00 RM
1 Earth work excavation
2 PCC(1:5:10)
SD3 1 676.000 0.800 0.075 40.560
SD4 1 740.000 1.150 0.075 63.825
104.385
Say 104.00 Cum
3 RCC M25 grade
Drain bottom
SD3 1 676.000 0.850 0.100 57.460
SD4 1 740.000 1.000 0.100 74.000
131.460
Say 131.00 Cum
623.70
4 PCC (1:4;8)
300 mm Dia 1 462.00 0.45 0.100 20.79
20.79
Say 21.00 Cum
570.03
Refillng 682.19
Say 682.00 Cum
0
631.20
Say 631.00 CUM
6 PCC (1;4:8)
100 mm dia 1.0 430.00 0.30 0.15 19.35
7 100mm Dia
100mmø Pipe
100 mm Diameter
Sump -1to Medical college 1
50.000 50.00
Block
Sump -2to Hostel block 1 50.000 50.00
STP to Node-1 1 65.000 65.00
Add for variations 15.00
From Mechine Bhagiradha line
250
to site sumps
430.00
Add for variations 21.50
451.50
Say 452.00 RM
8 75mmø Pipe
Medical college 1 60.000 60.00
Sump -2to Hostel block 1 200.00 200.00
Excess water 1 100.000 100.00
Flush water for Hostel building & 1
Medical college 200.000 200.00
Add for variations 36.00
596.00
SAY 596.00 RM
Manufacture,supply and delivery of cast carban steel rising/Non raising spindle sluice valves
design standard as per IS:14846/2000 for water supply scheme with ss spindle & ss working parts
the grade of cast steel for body Bonnet, Dome,Stool cover, Wedge Stuffing box, gland Thrust
Plate, Shall be as per IS:1030/1989.(The valve shall be used for High presure schmes &pumping
9 stations) excluding transporation, Central exise duty and sale tax etc., complete. ISI Marked
Manfacture, Supply and delivery of Cast Carbon Steel Bolted Cover Non Return Valve as per
IS:5312/Part 1/1984.Round body heavy duty material spec. As per IS:1030/1989 with SS Hinge
10 &Seat Rings.including transporation, Central Exercise duty and sale tax etc., complete
Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR
11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to
2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site,
labour charges for fixing, overheads & contractors profit complete for finished item of work at all
11 floor levels.
Refilling with useful excavated soil other than sand complying with standard specifications in
layers of 150 mm thick watering, tamping, consolidation including cost and conveyance of
12 water to work site and all operational, incidental, labour charges etc. complete
596.86
Plain Cement Concrete (1:2:4) (cement: fine aggregate: Coarse aggregate) for
foundations and under flooring bed using coarse aggregate 40mm size hard , machine
crushed granite from approved quarry including cost and conveyance of all materials like
cement, sand, coarse aggregate, water etc. to site, including sales & other taxes
exceluding GST on all materials and including all charges for machine mixing, laying
concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top
surface to the required level curing etc., and overheads & contractors profit complete for
13 finished item of work. (APSS No. 402) for Thrust Block