Professional Documents
Culture Documents
Ppe Standard (Guide)
Ppe Standard (Guide)
Ppe Standard (Guide)
10.1 Annexure 1
Temple Designs
"Adjustable Temples to
maximize fit and comfort
for virtually every worker.
When people have eyewear
that fits and feels better its a
real plus for compliance."
Anti-Fog ; Hard Coat ; Anti
Chemical ; Anti-static
coating (all in
one) Coat resists fogging,
scratching, static and
chemical attack thus
giving a higher life to the
spectacles testing as per
ANSI Z87.1 - 2003 Tested
as per the ANSI standards
Extended Wrap Around
Coverage The sweeping
curves of the polycarbonate
lens and accent frame color
give QX the popular
athletic look. The
wraparound design also
provides excellent front and
side
coverage. Plus, the seamless
lens allows for distortion-
free vision and excellent
peripheral clarity. Soft Non-
Slip Nosepiece Option No
marks on the nose even
after wearing
the eyewear for 8 hrs shift
6. •
PERSONAL PROTECTIVE EQUIPMENT & Page 4 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
extra comfort.
• Non slip rubber head grip
for secured fitting.
• Polycarbonate lenses with
99% UV protection.
• It should meet the
following testing
requirements as mandated
by ANS
I Z87.1 2003 standards.
High Velocity Impact Test.
Capable of resisting impact
from 6.35mm (¼ inch)
diameter steel ball fired at a
velocity of 45.7mps
(150fps) at specified parts
of the Polycarbonate lens
and the test is carried out by
placing the sample eyewear
on a headform. High Mass
Impact Test.
Tested by placing eyewear
on a headform and a pointed
projectile of 50
0gms is dropped from
127cm ( 50 inch )
Minimum Thickness and
Penetration Test.
Lens should have minimum
thickness of 2mm ( 0.079
inch ) and should be
capable of resisting
penetration from a weighted
projectile of 44.2gm
s ( 1.56 ounces ) dropped
from 127 cm ( 50 inches )
Scratch & Heat resistance
properties
The lens should be hard
coated, to prevent scratch
on the surface in
general use in Dusty/ dirty
area. The hot flying dust
particles should
not stick on the surface of
lens causing damage to the
goggles. The lens should be
of transparent/ Amber color.
PERSONAL PROTECTIVE EQUIPMENT & Page 5 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
8.
9 Goggles to wear over 0150A0028 Eye Protection: Safety goggles for use over
Prescription Glass Use over Power glasses
prescription Technical Specification :
goggles, SAFETY GOGGLES
recommended TYPE:SPECTACLE
for visitors or TYPE,PLASTIC FRAME
rare field REFERENCE STD.:IS
visiting people. 5983-EYE PROTECTORS
Additional Specification :
The Safety goggles should
meet the following
Specification
• Complies to the standards
ANSI Z 87.1 2003/
EN1888/ CE
Certified Polycarbonate
lenses with 99% UV
protection.
• It should meet the
following testing
requirements as mandated
by
PERSONAL PROTECTIVE EQUIPMENT & Page 6 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
11. Prescription Goggles 5385A0027 Eye Protection: 1 TYPE SINGLE VISION SAFETY
LENS
Single Vision For protection 2 COATING SCRATCH RESISTANT
Spectacle (Frame and of eye from 3 LENS MATERIAL
Lens both) POLYCARBONATE
Foreign 4 LENS THICKNESS 2
particles for 5 LENS COLOR TRANSPARENT
CLEAR
those having 6 OPTICAL CLASS 1
individual's 7 FRAME MATERIAL
POLYCARBONATE WITH TR90
prescription) 8 UV PROTECTION NOT
prescription APPLICABLE
9 NOSE PADS SOFT
glasses for 10 REFERENCE STANDARD EN166
distant ANSIZ87+
11 MARKING ANSI Z87.1 EN166 ON
& reading LENS&FRAME
purpose 12 TEMPLE POLYCARBONATE
TRANSPARENT
13 SPECIAL FEATURES SPH RANGE
UPTO 3
14 SPECIAL FEATURES CYL RANGE
UPTO 3
Add UMC Text:
Short Description :
Single Vision Powered Spectacle
=============================
==
Technical Specification :
REFERENCE STD.:EN 166 & ANSI
Z87+
SAFETY Belt:SINGLE VISION
POWERED SPECTACLE IN BLACK
POLYCARBONATE FRAME
=============================
==
Additional Specification :
Single Vision Powered Spectacle in Black
Polycarbonate Frame
Imported Polycarbonate, Single Vision,
high impact resistance lenses2
pcs, (Power range +3.0 to -4.0 Sph/ Cyl
upto -2.00) conforming to AN SIZ87.1
Standards, fitted on polycarbonate black
injection moulded fra me with inbuilt
transparent polycarbonateside shields.
Side arms mar ked ANSI
Z87.1
=============================
==
Custom Clarification :
Item Description
Single Vision Powered Spectacle in Black
Polycarbonate Frame
13 High Power Single 5385A0029 Eye Protection: 1 TYPE HIGH POWER SINGLE
VISION
Vision Spectacle For protection 2 COATING SCRATCH RESISTANT
(Frame and Lens of eye from 3 LENS MATERIAL
POLYCARBONATE
both) Foreign 4 LENS THICKNESS 2
particles for 5 LENS COLOR TRANSPARENT
CLEAR
those having 6 OPTICAL CLASS 1
individual's 7 FRAME MATERIAL
POLYCARBONATE WITH TR90
prescription) 8 UV PROTECTION NOT
prescription APPLICABLE
9 NOSE PADS SOFT
glasses for 10 REFERENCE STANDARD EN166
distant ANSIZ87+
11 MARKING ANSI Z87.1 EN166 ON
& reading LENS&FRAME
purpose 12 TEMPLE POLYCARBONATE
TRANSPARENT
13 SPECIAL FEATURES NOSE PIECE
UNIVERSAL FIT,
Add UMC Text:
Short Description :
High Powered Single vision Spectacle
=============================
==
Technical Specification :
REFERENCE STD.:EN 166 & ANSI
Z87+
SAFETY Belt:HIGH POWERED
SINGLE VISION SPECTACLE IN
BLACK POLYCARBONATE
PERSONAL PROTECTIVE EQUIPMENT & Page 10 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
=============================
==
Additional Specification :
High Powered Single vision Spectacle in
Black Polycarbonate Frame
Imported Polycarbonate, High single
vision, high impact resistance le nses-
2 pcs (Beyond power range +3.0 to -
4.0 Sph/ Cyl upto -2.00 ) conf orming
to ANSIZ87.1 Standards, fitted onMI 23
polycarbonate black inj ection moulded
frame with inbuilt transparent
polycarbonate side shiel
ds. Side arms
14 High Impact 5385A0041 Eye Protection: TYPE:PRESCRIPTION
Resistant For protection GOGGLES
Polycarbonate Digital of eye from COATING:NONE
Progressive Lens Foreign LENS
MATERIAL:POLYCARBON
with Anti Reflection particles for
ATE
Coating and Scratch those having LENS THICKNESS:2 MM
Resistant Coating individual's LENS
prescription) COLOR:TRANSPARENT
prescription CLEAR
glasses for OPTICAL CLASS:1
distant FRAME
& reading MATERIAL:POLYCARBON
purpose ATE WITH TR90
UV PROTECTION:NOT
APPLICABLE
NOSE PADS:NOT
APPLICABLE
REFERENCE
STANDARD:ANSI Z87.1
MARKING:ANSI Z87.1:2003
TEMPLE:POLYCARBONAT
E TRANSPARENT
SPECIAL
FEATURES:IMPACT
RESISTANCE F(45M/S)
NOSE PADS:NOT
APPLICABLE
REFERENCE
STANDARD:ANSI Z87.1
MARKING:ANSI Z87.1:2003
TEMPLE:POLYCARBONAT
E TRANSPARENT
SPECIAL
FEATURES:SCRATCH
RESISTANT COATING
16 CLEAR 0122A0788 Full Face Short Description :
POLYCARBONATE protection: Full CLEAR
FACE SHIELD Face POLYCARBONATE
protection from FACE SHIELD
heat, dust , Additional Specification :
flying particles General-purpose face
protection Large Window
Clear, Made of durable,
splash- and impact-resistant
polycarbonate. Simple
attachment scheme no
cams, straps or buckles.
heat resistance- provides
max 100 Degree Cen.
Size : 9" x 18.25" x 0.040".
Suitable for Industrial
Standard
17
PERSONAL PROTECTIVE EQUIPMENT & Page 12 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
18. Head Gear system to 0122A0790 first of all fix Short Description :
fix Face Shield with the head gear Headgear System for
Helmet system in Helmet attachment for Face
helmet ,than fix shield
the required Additional Specification :
face shield in it. High Heat Headgear System
for attaching Face Shield
with Helmet. Made
of Metal & triax materials
designed for high heat
application. Quick
change feature allows for
Face shield window
replacement in seconds.
Positive stop ratchet allows
the window to stay in the up
position and
out of the field of vision.
Meets ANSI Z87.1 -2003
standard.
19 WELDING & GAS 0122A0826 Full Face Short Description :
CUTTING SHIELD protection: Use Welding & Gas Cutting
while Gas Shield
cutting & Additional Specification :
welding ,gives Consist of two Parts
Full face 1.Welding Shield 2.
protection Helmet attachment
heat, flying Light weight passive
particle & welding shield with
radiation Polycarbonate inner and
hazard outer
protection plate for better
impact resistant and
breathing vents to
reduce CO2, Heat and fog
build up inside. Heat
reflective silver front
to reduce heating of the
shield for better comfort.
CE marks with EN 175F
& EN 166 approvals and
CLI approves. It should
give 13 DIN protection
20 FULL FACE 0122A0806 Full Face Short Description :
ALUMINISED protection: Use Full face Aluminized hood
HOOD in molten metal for the protection from
splashes area molten metal splash
,Protects head, Additional Specification :
full face, neck. Made up of Three parts
PERSONAL PROTECTIVE EQUIPMENT & Page 13 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
ANSIZ87.1 or equivalent
EN
21 12 Cal/ Cm2 Arc 5323A0012 Face protection ELECTRIC ARC FLASH FACE
SHIELD EXCEEDS NFPA 70E
Face Shield against MEETS/TESTED ASTM F21 78 ANSI
electrical arc Z87+S
RATED ATPV 12 CAL/CM2
flashes ENGRAVED ON PRODUCT;
POLYCARBONATE ;
SHATTERPROOF Premium Permanent
coating having helmet bracket with
elastomeric band for slotted and non
slotted cap style helmets. Permanent chin
protector The poly-carbonate Arc Shield
is injection molded with corrected optic s
and is molded to shape. The significant
quality the coating to provide a
permanent anti fog and adds abrasion and
scratch resistant properties which
prolongs the life of the shield up to f our
times longer in the field. The coating for
extra protection from sun damage to be
provided. It should provide zero
distortion and also provides better VLT
and has a higher impact value. Make
approved by TSL
22
size &
construction:- 12
inch long ,cuff 4.1/2
inch
hand.7.1/2 inch. the
palm, the inner
portion of the
thumb and all sides
of the other fingers
will be of leather.
upper half of the
outer portion of the
thumb will be of
leather. on the
dorsum side of the
hand ,the joint
leather
and canvas will
be covered by a
leather strap of
3/4inch
wide having four
stitches all over .the
palm shall be
of double
leather.
stitching: double
stitching from
inside having 8%
eight
stitches per inch
, the stirches will be
visible only on
the palm, back
portion of the
thumb and on the
leather
strap on the
dorsum.
material-leather-
natural colour,non
split full tanned
chrome leather
of thickness 0.9 mm
to 1.5mm.
cotton canvas
cloth - strong
variety 10 dz per
meter wt. sewing
PERSONAL PROTECTIVE EQUIPMENT & Page 21 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
DESCRIPTION:LEATHER
CUM
CANVAS(12")RT.HAND
ONLY
REFERENCE STD. : TS
03011-HAND GLOVES
COTTON CUM LEATHER
THE PALM, BACK
PORTION OF THE
THUMB AND ON THE
PERSONAL PROTECTIVE EQUIPMENT & Page 24 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
LEATHER TRAP ON
THE DORSUM.
44. Cut Resistant Level 5 Hand ABRASION RESISTANCE:4
Hand gloves 5301A0003 Protection CUT RESISTANCE:5
from TEAR RESISTANCE:4
Mechanical cut PUNCTURE RESISTANCE:3
REFERENCE
hazards
STANDARD:EN 388
REFERENCE
STANDARD:EN420
SPECIAL
FEATURES:KNITWRIST
CUFFSTYLE
45. Anti Vibration Hand 5301A0004 For shock HAND
Gloves absorption in GLOVES,MECHANICAL
pneumatic ABRASION RESISTANCE:3
drilling CUT RESISTANCE:2
TEAR RESISTANCE:2
operations
PUNCTURE RESISTANCE:1
REFERENCE
STANDARD:EN 388
REFERENCE
STANDARD:EN 10819
SPECIAL
FEATURES:GELFOAM
INTERLOCK COTTON
SPECIAL
FEATURES:NITRILE
COATED
SPECIAL FEATURES:TRM
0.9 TRH 0.52
SPECIAL
FEATURES:VELCRO
CUFFSTYLE
Chemical Handling 5301A0001 Flocklined for HAND
Gloves handling GLOVES,MECHANICAL
46. ABRASION RESISTANCE:4
chemicals CUT RESISTANCE:1
TEAR RESISTANCE:0
PUNCTURE RESISTANCE:1
REFERENCE
STANDARD:EN 374
REFERENCE
STANDARD:EN 388
SPECIAL
FEATURES:COTTON
FLOCKED
SPECIAL
FEATURES:GAUNTLET
CUFFSTYLE
PERSONAL PROTECTIVE EQUIPMENT & Page 25 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
SPECIAL
FEATURES:LENGTH 14"
SPECIAL
FEATURES:STITCHED
WITH KEVLAR THREAD
52. Hand gloves for Hand gloves HAND
adhesive handling 5301A0005 for adhesive GLOVES,MECHANICAL
ABRASION RESISTANCE:4
handling CUT RESISTANCE:1
TEAR RESISTANCE:2
PUNCTURE RESISTANCE:1
REFERENCE
STANDARD:EN 388
SPECIAL
FEATURES:ADHESIVE
HANDLING
SPECIAL
FEATURES:GAUGE 13
SPECIAL
FEATURES:NITRILE
COATED
53. Metal Mesh hand Metal Mesh HAND GLOVES,FINE AND
gloves 5254A0001 hand gloves , SUPRR WRK
SIZE:0.5MM IN DIAMETER
also known as MM
butchers hand MATERIAL OF
gloves , used CONSTRUCTION:STAINLE
in high cut SS STEEL CHAINMAIL
applications SPECIAL
FEATURES:CERTIFICATIO
N: ISO 13999-1
SPECIAL
FEATURES:PLASTIC
STRAP CLOSURE
SPECIAL
FEATURES:OUTER RING
DIAMETER 4MM MM
SPECIAL FEATURES:NO
SPECIAL FEATURES
SPECIAL
FEATURES:CHAIN EXTRA
METAL MESH GLOVES
SPECIAL
FEATURES:STANDARD
EN14328
SPECIAL
FEATURES:PRESS STUD &
ADJUSTABLE BUCKLE
54. Chemical handling Chemical HAND GLOVES,GRIP AND
gloves laboratory 5357A0003 handling OIL WORK
MATERIAL OF
analysis gloves CONSTRUCTION:NITRILE
laboratory 4.7 MIL
analysis
PERSONAL PROTECTIVE EQUIPMENT & Page 28 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
REFERENCE
STANDARD:EN 374(JKL)
SPECIAL
FEATURES:0.12MM
TEXTURED FINGERTIPS
SPECIAL FEATURES:FOR
LAB USE
SPECIAL
FEATURES:ROLLED
BEADED CUFFSTYLE
High Puncture 5301A0006 High puncture ABRASION RESISTANCE:4
55. resistant hand resistant hand CUT RESISTANCE:5
TEAR RESISTANCE:4
gloves gloves for PUNCTURE RESISTANCE:4
barbed wires REFERENCE
etc STANDARD:EN 388
REFERENCE
STANDARD:EN420
SPECIAL
FEATURES:LEATHER
COATED
SPECIAL
FEATURES:KNITWRIST
CUFFSTYLE
56. Abrasion resistant 5301A0008 Hand gloves ABRASION RESISTANCE:4
gloves for high CUT RESISTANCE:1
TEAR RESISTANCE:3
abrasion PUNCTURE RESISTANCE:1
resistance REFERENCE
STANDARD:EN 388
REFERENCE
STANDARD:EN420
SPECIAL
FEATURES:NITRILE
COATED
SPECIAL
FEATURES:KNITWRIST
CUFFSTYLE
SPECIAL FEATURES:
SEAMLESS NYLON LINER
57. Leg guard with two 0124A0190 Body Shin guards with two
protective rib Protection: For protective ribs in each,
protectionof made of black canvas
shin of the leg 350GSM and above, ribs
if they strike made of unbreakable
against sharp flexible material (for eg
objects. Mica), dimensions should
be length 18" and width
22". Sample should have
approval from safety
department.
PERSONAL PROTECTIVE EQUIPMENT & Page 29 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
58.
PERSONAL PROTECTIVE EQUIPMENT & Page 30 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
SLEEVE
APRON SIZE:24"X36"
61.
62.
63.
64.
COVER:NO COVER
STITCHING
THREAD:NOMEX
CERTIFICATION:ASTM
F1506 NFPA 70E CE 0120
COLLAR:VELCRO CUFFS
DESIGN:NOMEX
WRISTLETS CUFFS
COLOR:NOT APPLICABLE
ARC THERMAL
PROTECTIVE VALUE:40
cal/cm2 SPECIAL
FEATURES:SAFETY
GLASSES SPECIAL
FEATURES:BIB OVERALLS
SPECIAL
FEATURES:CARRYING
BAG SPECIAL
FEATURES:SET CONSISTS
OF ARC FLASH COAT
SPECIAL
FEATURES:PROHOOD(T)
SPECIAL FEATURES:HARD
HAT SPECIAL
FEATURES:HAND GLOVES
SPECIAL FEATURES:FR
SHIRT SPECIAL
FEATURES:FR PAINT
Additional Specification :
Specifications for the
Electric Arc Flash Suit
Electric Arc Flash suit
suitable for hazard risk
category-4 as specified in
NFPA-70E along with
protective hood (for
protection of face and
head). Detail specifications
are as below :--
1) Electric Arc Flash suit
Hazard Risk Category as
mentioned in NFPA70E - 4,
Clothing Description - FR
shirt and FR pants plus
double layer switching coat
and pants,
Total weight oz/yd2 - 24-
30 oz/yd2,
ATPV or EBT - 40
cal/cm2,
Note: ATPV is defined in
the ASTM P S58 standard
PERSONAL PROTECTIVE EQUIPMENT & Page 38 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
e) Washing instruction,
f) No of washes allowed,
The marking shall be
durable and shall not impair
the quality of elect
ric Arc flash suit.
Clothing material
characteristics:-- Clothing
made from synthetic
material such as acetate,
nylon, polyester, rayon
either alone or in blends
with cotton shall not be
acceptable.
Design Considerations:--
The following are some of
the principles (Ba
sed on ASTM-1506) that
should be considered in the
design and use of wearing
apparel for protection from
momentary electric Arc and
related thermal hazards:--
a) Clothing should cover
potentially exposed areas as
completely as
practicable. This should
include proper interfacing
of related items.,
b) Garment design should
permit easy and rapid
removal. Closure dressing
should be appropriate for
easy removal.
c) Garment design should
be such that garment
interfere the least with the
work function but still
provides the necessary
protection.
d) Logos, name tags and
other heraldry should be
limited in number and
surface area.
e) The fasteners or
closures are, for example
Zippers, snaps or buttons or
a combination thereof, shall
be used in a manner in
PERSONAL PROTECTIVE EQUIPMENT & Page 40 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
which they
are in contact with the skin,
they can increase the heat
transfer and burn injury due
to heat conduction or
melting onto the skin.
Fasteners or closures that
are used in this manner
should be covered with the
layer of fabric between the
fastener or the closure and
the skin. The fabric used for
this purpose shall meet the
requirement of this
performance specification.
Laundering: -- The garment
manufacture in conjunction
with the fiber and fabric
supplier should provide
instructions for the care and
maintenance of protective
wearing apparel.
71. Aluminised Kevlar 0995A0063 Body Material of construction:
Apron Size XL 0995A0064 protection: For Aluminised Para
Aluminised protection aramid/Kevlar
Kevlar Apron Size L against Molten GSM: Minimum 510
Metal No of physical layers: 2
Splashes Compliance to Standards:
EN 11612(A1,B1, C3, E3 at
1400 deg C), EN 148
6, Oekotex certification
Tag of manufacturer to be
put alongwith test
certificates
Size: XL
Dimensions: Length:1250
mm Width:800 mm Sleeve:
575 mm Collar:600 mm
The fabric should offer
excellent thermal, radiant
and convective heat
protection.
Inner lining material: 340
GSM, 100% cotton, FR, EN
11612
Closure: Front closure with
4 nos of buttons and Velcro
Comfortable and flexible
PERSONAL PROTECTIVE EQUIPMENT & Page 41 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
5288A0128- woven
Size 13 INNER LINING :
Nonwoven Synthetic ,
Non-woven Mesh with
3mm foam lining
COLLAR PEDDING :
Padded Double & Leather
Latex Foam , Thickness
14mm + - 1mm.
TONGUE : Leather.
Laminated with 6mm Foam
and Non-woven lining
COUNTER STIFFENER:
Leather Board, Thickness
1.8mm
INSOCK : Nonwoven
Synthetic, Non Woven
laminated on 3mm EVA
STEEL TOE CAP :
Powder coated imported
rust Resistant 200 J EN
12568
Insole : Minimum 2.5 mm
Non Woven PP laminated
Out Sole : PU double
density B 52 Mould (
Outsole Black )
Sole fixation : Direct
injection process, Double
stage cleats: Double
stage cleats for better grip,
Hydrocarbon Resistant
Sole, Complies with
EN ISO 20345 and EN ISO
20346 specifications , Slip
Resistant Sole on Oily
and Smooth Sole Cleated
Area As per 4.8 of IS 15298
(part 1)
Cleat Height (thickness) As
per 4.8 of IS15298 (part 1)
Sole Thickness Non cleated
As per 4.8 of IS 15298 (part
1)
Sole Abrasion Resistance
As per 4.8.4 of IS, 15298
(part 1)
Sole Flexing Resistance As
per 4.8.5 of IS 15298 (part
PERSONAL PROTECTIVE EQUIPMENT & Page 43 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
1)
Inter Layer Bond Strength
As per 4.8.7 of IS 15298
(part 1)
Electrical Resistance
Antistatic as per IS 15298
(Part 1) 4.3.4
Padding under steel toe
Polymer Comfort Strip
Thread Nylon or polyester
20 and 40 No.
Lace :Flat two Colored
Black/brown, black/grey or
any other combinat
ion matching with the shoe,
80- 100 cm
THREADS: Nylon, 6 Ply/3
Ply Matching colour
EYELET/VIS : Aluminium,
73. Lady Shoe with 0125A0222 Foot Short Description :
velcro fastening size- to protection: For LADY SHOE WITH
3 to size-7 0125A0226 general VELCRO FASTNING
purpose use. SIZE-3-7
Additional Specification :
DESIGN : APPROVED
BY TATA STEEL
Operative Standard : IS
15298:2002 Part I &II Also
meet . EN ISO 20345
UPPER : Buff Grain
Print/Plain Leather, Black
colour, Thickness 1.8-
2.2mm
VAMP LINING :
Nonwoven Synthetic, Non-
woven
INNER LINING :
Nonwoven Synthetic ,
Non-woven Mesh with
3mm foam lining
COLLAR PEDDING :
Padded Double & Leather
Latex Foam , Thickness
14mm + - 1mm.
TONGUE : Leather.
Laminated with 6mm Foam
and Non-woven lining
COUNTER STIFFENER:
Leather Board, Thickness
PERSONAL PROTECTIVE EQUIPMENT & Page 44 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
1.8mm
INSOCK : Nonwoven
Synthetic, Non Woven
laminated on 3mm EVA
STEEL TOE CAP :
Powder coated imported
rust Resistant 200 J EN
12568
Insole : Minimum 2.5 mm
Non Woven PP laminated
Out Sole : Poly Urethene
Direct Injected Sole
fixation, Single Density
Sole
Energy Return System :
Energey Return Tunnel in
Heel.
, Hydrocarbon Resistant
Sole, Complies with EN
ISO 20345 and EN ISO 2
0346 specifications , Slip
Resistant Sole on Oily and
Smooth
Sole Cleated Area As per
4.8 of IS 15298 (part 1)
Cleat Height (thickness) As
per 4.8 of IS15298 (part 1)
Sole Thickness Non cleated
As per 4.8 of IS 15298 (part
1)
Sole Abrasion Resistance
As per 4.8.4 of IS, 15298
(part 1)
Sole Flexing Resistance As
per 4.8.5 of IS 15298 (part
1)
Inter Layer Bond Strength
As per 4.8.7 of IS 15298
(part 1)
Electrical Resistance
Antistatic as per IS 15298
(Part 1) 4.3.4
Padding under steel toe
Polymer Comfort Strip
Thread Nylon or polyester
20 and 40 No.
74. Heat resistance shoes 5288A0084 Foot Short Description :
Size-5 to size-12 To protection: HEAT RESISTANT
5288A0089 working floor SAFETY BOOT
PERSONAL PROTECTIVE EQUIPMENT & Page 45 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
>200daN, confirms to CE
EN 1496 classB
90. Bar Guard 0122a0364 To put over Short Description :
projected BAR GUARD
bars/ rods to Technical Specification :
cover the sharp Bar Guard for bar safety
projected head made up of Poly Propylene
of the bar material in Florescent
lemon green color for
putting over the protruded/
projected bar as per
the sample shown & with
flexibility for fixing over
the bars having diameter
ranging from 7mm to
20mm. The external
dimension of the Bar Guard
will be as follows:
Depth= 65 mm
External dia. = 43 mm
Internal dia. = 37 mm
Projection length of each of
the four partition walls = 17
mm
Thickness of the partition
wall = 1.5 mm
Diameter of the top portion
of the Bar guard (oval
shaped) = 60 mm
Color = Florescent lemon
green color
‘BAR GUARD’ is required
to be written by embossed
letters on the top
of each of the Bar Guards.
91. Rail Crew jackets 0122A1657 To enhance Specification: Cotton
to visibility on reflective vest made of
0122A1659 rail track 100% cotton breathable
woven fabric. Fabric
construction & weight: 20 x
20 190 Gsm minimum light
weight & extra comfort.
Fabric Color : Yellow &
Green Combination.
Color Combined : Upper
Half portion is Yellow color
& half lower portion is
Green color.
Piping : Piping with Green
PERSONAL PROTECTIVE EQUIPMENT & Page 51 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
95. Cut resistant 5987A0001 For cut RESISTANT SLEEVE;100% PARA ARAMID
sleeve resistance MATERIAL OF CONSTRUCTION : 100% PARA
against sharp ARAMID
edges for arm COLOUR : YELLOW
CUT LEVEL : 4
LENGTH : 40 CM
COMPLIANCE TO CUT STANDARD : EN 388
244X
COMPLIANCE TO HEAT STANDARD : EN 407
X1XXXX
DEXTERITY : HIGH
NUMBER OF LAYER : 2
THUMB SLOT : YES
SPECIAL FEATURES : NO SPECIAL FEATURES
.
96.
97.
98.
PERSONAL PROTECTIVE EQUIPMENT & Page 55 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
10.2 Annexure 2: COEM Office Order dated 27.11.20 on Minimum PPE requirement for
entering 415V & above Electrical room
PERSONAL PROTECTIVE EQUIPMENT & Page 56 of 74
CLOTHING STANDARD GENERAL SPECIFICATION
Date