Professional Documents
Culture Documents
Project No. P12513 Feed For New Flow Suction Tank On Bu Hasa Cds
Project No. P12513 Feed For New Flow Suction Tank On Bu Hasa Cds
ORIGINATOR
FEED FOR NEW FLOW SUCTION TANK ON BU HASA CDS BU HASA P12513
1 18/02/2021 BR/JEM AAT PR ISSUED FOR TENDER
A 08/11/2020 BR/JEM AAT PR ISSUED FOR REVIEW DOCUMENT INSTRUMENT MTO
REV DATE BY CH'D APP'D DESCRIPTION ADNOC Doc No. 12-99-48-0607 Rev. 1 Page 1 of 6
NOTES:
1) Supply of Bulk Materials like Cable ties, Tube clamps, Lugs, Ferrules etc. and other consumables are in the scope of the Contractor.
2) All structural steel fabrication (JB frames, Stanchion, Cable Tray Supports etc.) shall be carried out by Contractor.
3) Buried/Concrete Trenches quantities shall be referred in Civil BOQ.
4) The given MTO in this document is for reference only. Detailed MTO shall be developed by EPC Contractor during Project execution.
5) Primary isolation piping valves and fittings for instruments are to be considered in Piping BOQ.
6) Contractor to provide manpower assistance to System Vendor to carry out system work, as required.
7) Instrument Cabinet Quantities are tentative. Number and types shall be finalized by the System Vendor / Contractor during Project execution.
8) Pole for Flame Detectors, Sounder and Beacon based on site condition during EPC.
9) Branch Cable Trays quantities have not been considered in MTO. The same shall be done by EPC Contractor during Detailed engineering stage.
10) Adequate number of MCT/Pipe Sleeves at ITR shall be provided by EPC Contractor during Detailed Engineering stage.
11) MTO includes 20% contingency for Cables, Glands and Instrument Bulk Quantities.
12) Refer to Piping Material Specification PMS 12-99-12-0601 for Valve's Trim Material.
(Vapour Control Water Transfer Vapour Recover Interface ADNOC Interface Inferface Adnoc Foam System FST's Nitrogen Nitrogen Degassing F&G LAYOUT Condesnsate
Deggasing Boot (V- system)Deggasing Flow suction Tank Pump (P-2416,P- Ejectors (J-3804- Degassing Boot (V- Onshore/AGP Lean ADCO/GASCO GAS Onshore/AGPGas Deggasing Boot (V- T-0801,T-0802,T- Distribution Boot DEGASSING Tank Flare Interconnecting lines F&G LAYOUT FLARE
Type Size Rating/ Unit Bore Type 0704) (T-0804) 0701) Gas Recycle 0702) TOTAL FL-1911 AREA TOTAL REMARKS
Boot (V-0704) 2417) 03&J-3804-04) System HEADER Header 0803&T-0804 Network V-0703 SYSTEM (CDS) from HP/LP KO drums (FLARE)
12-01-08-0611-1 12-01-08-0611-2 12-01-08-0612 12-01-08-0613 12-01-08-0614 12-01-08-0615 12-01-08-0619 12-01-08-0617 12-01-08-0618 12-01-08-0623 12-01-08-0625 12-01-08-0631 12-01-08-0636 12-01-45-0601 12-39-08-0611 12-39-08-0612 12-39-45-0601
EQUIPMENT LIST
PRESSURE INSTRUMENTS
PRESSURE GAUGES
_ _ - 2 4 6 5 3 4 1 - 17 9 - 51 3 - 3
Bourdon Type
PRESSURE TRANSMITTERS
Smart Electronic, Diaphragm Type, with 2-way manifold,Output signal: 4-20 mA, _ _ 1 3 8 5 6 2 3 5 1 2 - 9 1 - 46 3 - 3
HART, IP Rating: IP 65
DIFFERENTIAL PRESSURE INDICATOR
Bourdon Type
_ _ - - - - - - - - - - 0 - - 0
FLOW INSTRUMENTS
FLOW INDICATOR - ROTAMETER TYPE
Type: Tube Magnetic follower, Size: 3/4" , Rating: 150#RF, 3/4" 150# 1 - 1 - - 1 - 1 - - 1 - 5 - - 0
Float Material:SS 316L, IP Rating: IP 65
(Vapour Control Water Transfer Vapour Recover Interface ADNOC Interface Inferface Adnoc Foam System FST's Nitrogen Nitrogen Degassing F&G LAYOUT Condesnsate
Deggasing Boot (V- system)Deggasing Flow suction Tank Pump (P-2416,P- Ejectors (J-3804- Degassing Boot (V- Onshore/AGP Lean ADCO/GASCO GAS Onshore/AGPGas Deggasing Boot (V- T-0801,T-0802,T- Distribution Boot DEGASSING Tank Flare Interconnecting lines F&G LAYOUT FLARE
Type Size Rating/ Unit Bore Type 0704) (T-0804) 0701) Gas Recycle 0702) TOTAL FL-1911 AREA TOTAL REMARKS
Boot (V-0704) 2417) 03&J-3804-04) System HEADER Header 0803&T-0804 Network V-0703 SYSTEM (CDS) from HP/LP KO drums (FLARE)
12-01-08-0611-1 12-01-08-0611-2 12-01-08-0612 12-01-08-0613 12-01-08-0614 12-01-08-0615 12-01-08-0619 12-01-08-0617 12-01-08-0618 12-01-08-0623 12-01-08-0625 12-01-08-0631 12-01-08-0636 12-01-45-0601 12-39-08-0611 12-39-08-0612 12-39-45-0601
PRESSURE CONTROL VALVE
Size: 36", Rating: 150# Butterfly valve, Body/Bonet Material: ASTM A350 LF2/ A352
36" 150# - 1 3 - - - - - - 4 - - 0
LCC + CLAD UNS N08825, Trim Material : Alloy 825, With PNEUMATIC Actuator,
3.5 to 10 Barg, Fail Close, STELLITE 6 (Hard Facing)
(Vapour Control Water Transfer Vapour Recover Interface ADNOC Interface Inferface Adnoc Foam System FST's Nitrogen Nitrogen Degassing F&G LAYOUT Condesnsate
Deggasing Boot (V- system)Deggasing Flow suction Tank Pump (P-2416,P- Ejectors (J-3804- Degassing Boot (V- Onshore/AGP Lean ADCO/GASCO GAS Onshore/AGPGas Deggasing Boot (V- T-0801,T-0802,T- Distribution Boot DEGASSING Tank Flare Interconnecting lines F&G LAYOUT FLARE
Type Size Rating/ Unit Bore Type 0704) (T-0804) 0701) Gas Recycle 0702) TOTAL FL-1911 AREA TOTAL REMARKS
Boot (V-0704) 2417) 03&J-3804-04) System HEADER Header 0803&T-0804 Network V-0703 SYSTEM (CDS) from HP/LP KO drums (FLARE)
12-01-08-0611-1 12-01-08-0611-2 12-01-08-0612 12-01-08-0613 12-01-08-0614 12-01-08-0615 12-01-08-0619 12-01-08-0617 12-01-08-0618 12-01-08-0623 12-01-08-0625 12-01-08-0631 12-01-08-0636 12-01-45-0601 12-39-08-0611 12-39-08-0612 12-39-45-0601
SHUTDOWN VALVE
Ball Valve Type, Size: 3", Rating: 300# RF,Bore Type: Reduced, Body Material:
3" 300# Reduced - - - - 1 - - - - - 1 - - 0
ASTM A 105N / A216 GR WCB / WCC, Trim Material: SS 316L, Fitted with
Pneumatic Spring Return Actuator, Fail Close and PST Accessories.
SHUTDOWN VALVE
Ball Valve Type, Size: 8", Rating: 150# RF, Bore Type: Reduced, Body Material:
8" 150# Reduced - - - 1 - - - - - - - 1 - - 0
ASTM A350 LF2 / A352 LCC + CLAD UNS N08825, Trim Material:ALLOY 825,
Fitted with Pneumatic Spring Return Actuator, Fail Close and PST Accessories.
SHUTDOWN VALVE
Ball Valve Type, Size: 8", Rating: 150# RF, Bore Type: Reduced, Body Material:
8" 150# Reduced 1 - - - - - 1 - - 1 - 3 - - 0
ASTM A350 LF2/ A352 LCC + CLAD UNS N08825, Trim Material:Alloy 825, Fitted
with Pneumatic Spring Return Actuator, Fail Close and PST Accessories.
SHUTDOWN VALVE
Ball Valve Type, Size: 8", Rating: 300# RF, Bore Type: Reduced, Body Material:
8" 300# Reduced - - - - - 1 1 1 - - - - 3 - - 0
ASTM A 105N / A216 GR WCB / WCC, Trim Material:SS 316L, Fitted with
Pneumatic Spring Return Actuator, Fail Close and PST Accessories.
SHUTDOWN VALVE
Ball Valve Type, Size: 3/4", Rating: 150# RF, Bore Type: Reduced, Body Material:
3/4" 150# Reduced - - 1 - - - - - - - 1 - - 0
ASTM A 105N / A216 GR W CB / WCC, Trim Material:SS 316L, Fitted with
Pneumatic Spring Return Actuator, Fail Close and PST Accessories.
SHUTDOWN VALVE
Ball Valve Type, Size: 12", Rating: 300# RF, Bore Type: Reduced, Body Material: 12" 300# Reduced 1
Trim Material:
SHUTDOWN VALVE
Ball Valve Type, Size: 24", Rating: 150# RF,Bore Type: Reduced, Body
24" 150# Reduced - - 1 - - 2 - 4 - - 2 - 9 - - 0
Material:ASTM A105N /A216 GR WCB/WCC, Trim Material: SS 316L, Fitted with
Pneumatic Spring Return Actuator, Normally Open and PST Accessories.
SHUTDOWN VALVE
28" 150# 1 1
Ball Valve Type, Size: 28", Rating: 150# RF,Bore Type: Reduced, Body Material:
SHUTDOWN VALVE
32" 150# 1 2 1 4
Ball Valve Type, Size: 32", Rating: 150# RF,Bore Type: Reduced, Body Material:
SHUTDOWN VALVE
Ball Valve Type, Size: 36", Rating: 150# RF,Bore Type: Reduced, Body Material:
36" 150# Reduced 1 - - - - - - - - - 1 - - 0
ASTM A105N /A216 GR WCB/WCC, Trim Material: SS 316L, with Pneumatic Spring
Return Actuator, Fail Close and PST Accessories.
SHUTDOWN VALVE
Ball Valve Type, Size: 36", Rating: 150# RF,Bore Type: Reduced, Body
36" 300# Reduced 1 1 2
Material:ASTM A350 LF2 / A352 LCC + CLAD UNS N08825 , Trim Material: Alloy
825, with Pneumatic Spring Return Actuator, Fail Close and PST Accessories.
SHUTDOWN VALVE
Ball Valve Type, Size: 42", Rating: 150# RF, Bore Type: Reduced,, Body Material:
42" 150# Reduced - - 1 - - 1 - - - - 2 - - 0
ASTM A 105N / A216 GR W CB / WCC, Trim Material:SS 316L, Fitted with
Pneumatic Spring Return Actuator, Fail Close and PST Accessories.
SPECIAL VALVE
Ball Valve Type, Size: 8", Rating: 150#RF, Body Material: ASTM A350 LF2/ A352
8" 150# Full - - 1 - - - - - - - 1 - - 0
LCC + CLAD UNS N08825, Trim Material: Alloy 825, Fitted with Pneumatic Spring
Return Actuator, Locking in position
SPECIAL VALVE
Size: 32", Rating: 150#RF, Butterfly Valve Type, Body Material: , 32" 150# 1
Trim Material: , Fail Close
SPECIAL VALVE
Size: 24", Rating: 300#RF, Butterfly Valve Type, Body Material: , 24" 300# Full 1 - - - - 1 - - - - - 2 - - 0
Trim Material: , Fail Close
MISCELLANEOUS ITEM
RUPTURE DISC X" XX# - - 2 - - - - - - - 2 - - 0
FIRE MONITOR 6 6 1 1
FIRE & GAS DETECTORS/DEVICES
FLAME DETECTOR (XFD)
_ _ - - - - - - - - - 8 8 - 4 4
Type: 3IR, Sensor Model Number: VTA, Sensor Housing Material: SS316
FLAMMABLE GAS DETECTOR (XGD)
_ _ - - - - - - - - - 8 8 - 4 4
Type: Point Type (IR). Model Number: VTA, Housing material: SS316
TOXIC GAS DETECTOR (XTGD)
Type: Electro-chemical. Point Type Detection, _ _ - - - - - - - - - - 0 - 4 4
Sensor Model Number: TBA, Sensor Housing Material: SS316
MANUAL CALL POINT (XMCP)
_ _ - - - - - - - - - 6 6 - - 0
Type: Break Glass and push type, Stayput, Housing material: SS316
FIRE ALARM SOUNDER (XFAS)
Type: Multi-tone type, Material: SS316, Tone Selection: Programmable (Dual Tone), _ _ - - - - - - - - - 1 1 - - 0
Colour (Finish): Red
GAS ALARM SOUNDER (XGAS)
Type: Multi-tone type, Material: SS316, Tone Selection: Programmable (Dual Tone), _ _ - - - - - - - - - 1 1 - - 0
Colour (Finish): Red
FIRE ALARM BEACON (XFAB)
_ _ - - - - - - - - - 1 1 - - 0
Type: Xenon Discharge Type, Material: SS316, Colour (Finish): Red
GAS ALARM BEACON (XGAB)
_ _ - - - - - - - - - 1 1 - - 0
Type: Outdoor beacon/strobe, Material: SS316, Colour: Amber
ADNOC Classification: Internal #
(Vapour Control Water Transfer Vapour Recover Interface ADNOC Interface Inferface Adnoc Foam System FST's Nitrogen Nitrogen Degassing F&G LAYOUT Condesnsate
Deggasing Boot (V- system)Deggasing Flow suction Tank Pump (P-2416,P- Ejectors (J-3804- Degassing Boot (V- Onshore/AGP Lean ADCO/GASCO GAS Onshore/AGPGas Deggasing Boot (V- T-0801,T-0802,T- Distribution Boot DEGASSING Tank Flare Interconnecting lines F&G LAYOUT FLARE
Type Size Rating/ Unit Bore Type 0704) (T-0804) 0701) Gas Recycle 0702) TOTAL FL-1911 AREA TOTAL REMARKS
Boot (V-0704) 2417) 03&J-3804-04) System HEADER Header 0803&T-0804 Network V-0703 SYSTEM (CDS) from HP/LP KO drums (FLARE)
12-01-08-0611-1 12-01-08-0611-2 12-01-08-0612 12-01-08-0613 12-01-08-0614 12-01-08-0615 12-01-08-0619 12-01-08-0617 12-01-08-0618 12-01-08-0623 12-01-08-0625 12-01-08-0631 12-01-08-0636 12-01-45-0601 12-39-08-0611 12-39-08-0612 12-39-45-0601
BULK MTO
INSTRUMENT & F&G CABLES (Refer Specification for Instrument Cables 12-99-39-0604
Flame Retardant Cables, Armoured (Galvanized Steel wire).
Type-A1 : 1Px1.5mm2, (XLPE/COLL SCR/SWA/LSHF+IS) Mtrs 11 8 23 8 13 8 3 - 1 - 2808 7 - 252
Type-A1 : 1Px1.5mm2, (XLPE/COLL SCR/SWA/LSHF+NIS) Mtrs - - - - - - - - - - 0 - - 0
Type-A2 : 5Px1.5mm2, (XLPE/IND & COLL SCR/SWA/LSHF+IS) Mtrs 1 - 1 1 - - - - - - 2130 - - 0
Type-A2 : 5Px1.5mm2, (XLPE/IND & COLL SCR/SWA/LSHF+NIS) Mtrs - - - - - - - - - - 0 - - 0
Type-A2 : 10Px1.5mm2, (XLPE/IND & COLL SCR/SWA/LSHF+IS) Mtrs - - - 1 - - - - - - 798 1 - 1260
Type-A2 : 20Px1.5mm2, (XLPE/IND & COLL SCR/SWA/LSHF+IS) Mtrs 1 - 1 - 1 1 - - - - 3132 - - 0
Type-A3 : 2Px1.5mm2, (XLPE/COLL SCR/SWA/LSHF+IS) Mtrs 2 1 3 1 1 1 1 - - - 324 - - 0
Type-A3 : 5Px1.5mm2, (XLPE/COLL SCR/SWA/LSHF+IS) Mtrs - - - - 1 - 1 - - - 1398 - - 0
Type-A3 : 5Px1.5mm2, (XLPE/COLL SCR/SWA/LSHF+NIS) Mtrs - - - 2 - - - - - - 72 2 - 72
Type-A3 : 10Px1.5mm2, (XLPE/COLL SCR/SWA/LSHF+IS) Mtrs 1 - - 1 - - - - - - 1290 - - 0
Type-A3 : 10Px1.5mm2, (XLPE/COLL SCR/SWA/LSHF+NIS) Mtrs 1 - 1 - 2 1 - 2 - - - 252 - - 0
Type-A3 : 20Px1.5mm2, (XLPE/COLL SCR/SWA/LSHF+IS) Mtrs 1 - 1 - - - - - - - 1572 - - 0
Type-A3 : 20Px1.5mm2, (XLPE/COLL SCR/SWA/LSHF+NIS) Mtrs 1 - 1 - 1 - 1 - - - 2742 1 - 0
Type-A4 : 1Tx1.5mm2, (XLPE/COLL SCR/SWA/LSHF+IS) Mtrs - - - 2 - - - - - - 72 - - 0
Type-A5 : 5Tx1.5mm2, (XLPE/IND & COLL SCR/SWA/LSHF+IS) Mtrs - - - 1 - - - - - - 798 - - 0
Fire Resistant Cables, Armoured (Galvanized Steel wire).
Type-B1 : 1Px1.5mm2, (XLPE/COLL SCR/SWA/LSHF+IS) Mtrs 2 - 6 4 1 1 - - - - 504 2 - 72
Type-B1 : 1Px1.5mm2, (XLPE/COLL SCR/SWA/LSHF+NIS) Mtrs 3 - 18 - - - - - - - 756 2 - 72
Type-B2 : 5Px1.5mm2, (XLPE/IND & COLL SCR/SWA/LSHF+IS) Mtrs 1 - - 1 - 1 - - - - 2328 2 - 2520
Type-B2 : 10Px1.5mm2, (XLPE/IND & COLL SCR/SWA/LSHF+IS) 690 - - 1 - 1 - - - - - 1626 - - 0
Type-B2 : 10Px1.5mm2, (XLPE/IND & COLL SCR/SWA/LSHF+NIS) Mtrs - - 2 - - - - - - - 2082 - - 0
Type-B4 : 1Tx1.5mm2, (XLPE/COLL SCR/SWA/LSHF+NIS) Mtrs - - 16 - - - - - - - 576 12 - 432
Type-B5 : 10Tx1.5mm2, (XLPE/IND & COLL SCR/SWA/LSHF+NIS) Mtrs - - 2 - - - - - - - 1662 - - 0
Type-B5 : 20Tx1.5mm2, (XLPE/IND & COLL SCR/SWA/LSHF+NIS) Mtrs - - - - - - - - - - 0 1 - 1260
Type-C2 : 7Cx2.5mm2, (LV CONTROL)(XLPE/SWA/LSHF+NIS) Mtrs - - 1 - - - - - - - 36 - - 0
Type-C2 : 12Cx2.5mm2, (LV CONTROL)(XLPE/SWA/LSHF+NIS) Mtrs - - 1 - - - - - - - 828 - - 0
Type-D1 : 2Cx2.5mm2, (LV CONTROL)(MICA/XLPE/SWA/LSHF+NIS) Mtrs 4 1 13 3 1 1 1 - - - 864 3 - 108
Type-D1 : 19Cx2.5mm2, (LV CONTROL)(MICA/XLPE/SWA/LSHF+NIS) Mtrs 36 1 - 0
Type-D2 : 7Cx2.5mm2, (LV CONTROL)(MICA/XLPE/SWA/LSHF+NIS) Mtrs 1 - - - - - 1 - - - 1140 - - 0
Type-D2 : 12Cx2.5mm2, (LV CONTROL)(MICA/XLPE/SWA/LSHF+NIS) Mtrs 1 - 2 - - - - - - - 2394 - - 0
Type-D2 : 19Cx2.5mm2, (LV CONTROL)(MICA/XLPE/SWA/LSHF+NIS) Mtrs - - - - - - - - - - 0 1 - 0
Type-D3 : 7Cx4.0mm2, (LV CONTROL)(MICA/XLPE/SWA/LSHF+NIS) Mtrs 2 2058 1 - 1260
INSTRUMENT JB'S - EX 'e' GRP, IP-66
16 TERM JB (5P) Nos 2 - 1 4 1 1 1 - - - 9 4 - 2
31 TERM JB (10P) Nos 2 - 4 2 3 1 - 2 - - - 8 1 - 1
61 TERM JB (20P) Nos 3 - 3 - 2 1 1 - - - 8 1 - 0
7 TERM JB (7C) Nos 1 - 1 - - - 1 - - - 5 - - 1
12 TERM JB (12C) Nos 1 - 3 - - - - - - - 2 - - 0
19 TERM JB (19C) Nos - - - - - - - - - - 1 1 - 0
21 TERM JB (5T) Nos - - - 1 - - - - - - 1 - - 0
41 TERM JB (10T) Nos - - 2 - - - - - - - 2 - - 0
61 TERM JB (20T) Nos - - - - - - - - - - 0 1 - 1
INSTRUMENT CABLE GLANDS (Material: Nickel Plated Brass) (Double compression type) AND
INSTRUMENT CABLE/TUBING TRAYS
Cable Glands of Size M20 Nos 24 9 82 21 16 11 6 - 1 - 408 27 - 65
Cable Glands of Size M25 Nos 3 - 4 5 3 1 1 3 - - - 50 5 - 10
Cable Glands of Size M32 Nos 1 - 5 3 2 - - - - - 26 1 - 2
Cable Glands of Size M40 Nos 3 - 4 - 1 1 1 - - - 26 1 - 0
Cable Glands of Size M50 Nos - - - - - - - - - - 0 1 - 2
Instrument Cable Tray of Size 300W Meters - - - - - - - - - - 100 - - 0
TUBING & FITTINGS
Instrument Tubing & Fittings for Process Hookup
1/4"OD x 0.049"W.T., Tubing, Alloy 825 Mtrs - - - - - - - - - - 68 - - 7
1/2"OD x 0.083"W.T., Tubing, Alloy 825 Mtrs - - - - - - - - - - 259 - - 22
1/2"NPT(M) x 1/4"OD, Male Connector-Compression Type, Alloy 825 Nos - - - - - - - - - - 98 - - 11
1/2"NPT(M) x 1/2"OD, Male Connector-Compression Type, Alloy 825 Nos - - - - - - - - - - 43 - - 4
1/2"NPT(F) X 1/2"OD, Female Connector-Compression Type, Alloy 825 Nos - - - - - - - - - - 0 - - 0
1/2"OD, Plug-Compression Type, Alloy 825 Nos - - - - - - - - - - 0 - - 0
1/4"OD, Cap-Compression Type, Alloy 825 Nos - - - - - - - - - - 136 - - 14
1/2"OD, Union-Compression Type, Alloy 825 Nos - - - - - - - - - - 43 - - 4
1/2"OD x 1/2"OD x 1/2"OD, Union Equal TEE-Compression Type, Alloy 825 Nos - - - - - - - - - - 0 - - 0
1/2"OD, Ball valve-Compression Type, Alloy 825 Nos - - - - - - - - - - 0 - - 0