Professional Documents
Culture Documents
Auto Posting of Material Directly in Quality
Auto Posting of Material Directly in Quality
In general, P2P Cycle we received the Goods in Unrestricted Stock for directly
use in production or using this we can directly issue the material without any
inspection.
But as per some Business requirement they do not want the material directly
use after the receiving in plant. They need the Quality Inspection step for their
business scenario. They want to use material only after the Quality Inspection
for tracking the purpose of Audit or any other things.
In this business scenario we need to do Post the Material in Quality Inspection
while doing the Goods Receipt. After the Quality inspection it will be used for
Production.
Step by Step Process of Auto Posting of Material in Quality Inspection.
Step: - 1
Create a Material Master by using T-Code: - MM01
While creating Material Master under Purchasing View Tick the Post to
Inspection Stock as shown above.
Material 100000000000040100 created
LinkedIn | Mayur Sonar
Email :- sonarmayur1998@gmail.com
Mo. No: - 7744918923
Step: - 2
Now Create Standard PO by using T-Code: - ME21N
While Creating PO under the Delivery Tab Stock Type showing in Quality
Inspection as per we set in Material Master.
Std.Pur.Doc. Test-1 created under the number 4500027913
Step: - 3
Just check the Stock of Material by using T-Code: - MMBE
While doing GR system will show you the Stock type in Quality
Inspection by default as per settings.
Material document 10010095 posted.
Now Again Check the stock of Material by using T-Code: - MMBE
As this material is in Quality Inspection system will not allow to use this
for Production. It will allow only after the clearance from Quality
Inspection.
Do the Transfer Posting by using T-Code: - MIGO
Now the Stock in Unrestricted use. It will be used for production now.
System will allow to post the goods issue as below.