Professional Documents
Culture Documents
07 Moment of Inertia For (Columns)
07 Moment of Inertia For (Columns)
07 Moment of Inertia For (Columns)
important Note:- Pu &Mu22&Mu33&RFT% should be from last run and at the critical combination
ultimate moment at considered floor Mu33 = 100 t.m. local axis in etabs
Fy = = 460 N/mm2
fc' = = 40 N/mm2
column rft ratio (from last etabs design which modifier = 0.7 ) = 1.17 ٪
output data
Po nominal axial load strength at zero ecc. = 0.85Fc'(Ag-Ast) + (Fy*Ast) = 2494.99 ton
important Note:- Pu &Mu22&Mu33&RFT% should be from last run and at the critical combination
fc' = = 40 N/mm2
column rft ratio (from last etabs design which modifier = 0.7 ) = 1.47 ٪
output data
Po nominal axial load strength at zero ecc. = 0.85Fc'(Ag-Ast) + (Fy*Ast) = 5341.38 ton
can be taken from the following values or calculated as per the above equations
compression members :-
columns 0.7
walls-uncracked 0.7
walls-cracked 0.35
flexural members :-
Beams 0.35
Ig =bt^3/12 #REF! m4
φ= Po factor
Tied stirrup = 0.65 0.8
spiral stirrup = 0.75 0.85
FOR vertical member
m2-2 = MOMENT ARROUND AXIS 2-2
m3-3 =MOMENT ARROUND AXIS 3-3
φ= Po factor
Tied stirrup = 0.65 0.8
spiral stirrup = 0.75 0.85
5th equ ( 1.2D+0.5Ln+Lg+Exb) &6th equ ( 1.2D+0.5Ln+Lg-Exb) &7th equ ( 1.2D+0.5Ln+Lg+Eyb) 8th equ ( 1.2D+0.5Ln+Lg-Eyb)