1CL Napire, John Eduard H.

IT CO2A

1. The Example is below the box of the diagram

Messages are sent from a sending device, which must be linked to a connecting device in order to have
network access.

The connecting device breaks the message into packets, which are smaller pieces of data.

The rules and procedures that coordinate the sending and receiving devices to guarantee that data
packets are delivered and received by the proper devices in the correct format are known as data
transmission specifications.

The packets are carried from router to router until they reach the connecting device on the receiving
end through the communication channels. Before the message is fully received by the receiving device,
this connection device will reassemble the packets into the entire message.
2. Given the illustration below, in 6 to 8 sentences, explain how autonomous ship system provide

communication and control between ship and shore control center. (10 points)

As seen in the diagram, an autonomous ship is operated from afar and monitored using sensors like as
Radar, sonar, GPS, and AIS will be added to the infrared and visible spectrum cameras, as well as radar,
sonar, GPS, and Escapable of providing navigational data These sensors relay signals to a satellite that is
accessible for use. Even at a great distance from the land, communication between ship and shore is
possible. The data is relayed to the operator on the coast. Onboard, be aware of the unique scenario.

The Procedure of communication between the unmanned ship and the shore center communication,
they are using the satellite by communicating and transferring message or command The autonomous
level 5 is a full driving automation so means that it is unmanned vessel and it is being controlled by the
shore through the satellite, or also it is automation that is being monitored with the help of the satellite
to the shore based system where humans can control and monitor the ship.