Professional Documents
Culture Documents
EPP (Finals)
EPP (Finals)
CITY OF MANDAUE
MANDAUE CITY COLLEGE
Mandaue City Cultural and Sports Complex
Don Andres Soriano Ave., Centro, Mandaue City, Cebu, Philippines, 6014
Tel. Nos.: (032) 236-5520, (032) 420-9228 | E-mail: mc.college@hotmail.com
FINAL EXAMINATION
Multiple Choice: Read and understand the statement below carefully and analyze
the given answers. Kindly encircle the letter of the best answer, if you can give
definition/purpose of the answers much appreciated.
1. It is the by-product of trees which are used for carpentry projects.
a. Lumber c. Cambium
b. Carpentry d. Yard
2. What computation formula is used to compute for the measurement of wood
in board feet?
a. T + W + L x 10 c. T – W – L / 12
b. T x W x L / 10 d. T x W x L / 12
3. Which part of the wood consists of substances that are insusceptible to
attacks by insects and has high level of durability?
a. Heartwood c. Cambium layer
b. Sap wood d. Late wood
4. Horizontal lines are best drawn using this instrument.
a. Triangle c. Meter stick
b. Ruler d. T-square
5. Fiber direction of wood should be taken into consideration when designing a
product. Which direction of fiber reaches the highest level of bending
strength?
a. Parallel to fiber c. Diagonal with the load
b. Across the fiber direction d. Along the fiber direction
6. What process is used in making bent wood products to easily distort the
shape of the wood without reverting to its original state?
a. Cold water treatment b. heat treatment by hot steam
b. Sun drying d. high pressure treatment
7. How much will Mr. Ravanes pay if he will purchased 14 pieces of 2x2x10 of
lumbers if the per board foot is worth of Php 12.50?
a. Php 41. 66 c. Php 1, 750
b. Php 583.33 d. Php 653.33
8. What tool is used to adjust the kerfs of teeth of the saw in order to reduce
friction between the saw blade and wood, and to discharge the saw dust
easily?
a. Triangular file c. Saw horse
b. Pliers d. Saw set
9. It is a wood finishing material derived from different colors of woods such as
walnut, mahogany and natural color.
a. Varnish c. Rags
b. Shellac d. Stain
10. In sawing soft wood and thin wood, what is the recommended angle of the
saw to the wood?
a. 30-45 degrees c. 10-20 degrees
b. 15-30 degrees d. 80-160 degrees
11. What line is projected as the shorter line in drawing the Orthographic
Projection?
a. Vertical line c. Curve line
b. Inclined line d. Horizontal line
12. What type of wood joint should be used in constructing chair and tables
to obtain strength and durability?
a. Miter joint c. Lap joint
b. Butt joint d. Mortise and tendon joint
13. When you intend to assemble a product or need to obtain a strong joint.
What construction hardware is appropriate to use?
a. Screws c. Hinges
b. Nails d. Dowel
14. What finishing material is used to obtain a suitable wood color before
applying a transparent finishing material?
a. Paint c. Stain
b. Base coat d. Filler
15. One of the following is the operation performed in the preparation of the
wood for commercial purposes. Which one is it?
a. Sawing c. Lumbering
b. Logging d. Seasoning
16. Lumber is as good as its preparation. When it’s drying, the process
involved is _________.
a. Seasoning c. Lumbering
b. Staining d. Logging
17. Mr. Mario is a carpenter used to work in a furniture shop in his
community. His new task is to make a frame that has no edge on the four
sides of the wood. If you are him, what tool you will be using in order to get
a perfect result in making the frame?
a. Electric drill c. Router
b. Circular saw d. Jigsaw
18. What is the conversion equivalent of one inch to centimeters?
a. 25.4 c. 0.254
b. 2.54 d. 0.0254
19. A carpentry tool used to make woods smooth and even.
a. File c. Chisel
b. Planer d. turning saw
20. A carpentry tool used to measure the angles, edges, and corners.
a. Caliper c. L-square
b. Gauge d. Center Punch
21. Removing or paring away some part of the wood requires the use of this
hand tool.
a. Chisel c. Spoke shave
b. Plane d. File
22. Nails are essential material in putting in place pieces of wood. To drive or
pull a nail the right tool for the job is ____________.
a. Screw c. Ball peen hammer
b. Claw hammer d. Mallet
23. Sawing irregular shapes on thin pieces of wood is done with the use of
______.
a. Cross-cut saw c. Rip saw
b. Hack saw d. Coping saw
24. This fastening material holds better, look better, and can be removed easily
without damaging the wood. It is commonly known as _________.
a. Screw c. Spike
b. Bolt d. Nail set
25. It is a power tool used primarily for cutting curved or irregular shapes of
wood surfaces.
a. Electric drill c. Router
b. Circular saw d. Jigsaw
26. Cabinets and doors are common parts of a house. They require swinging
shutters for appropriate attachment with the use of __________.
a. Hinges c. Bolts
b. Screws d. Handles
27. A carpentry tool used to hold materials to a drill press table.
a. Auger bit c. Scratch awl
b. Rivets d. C-clamp
28. Mr. Ruiz wants to saw the wood for his bench. Part of the cutting process
is to cut along the grain of the wood. If you are him, what kind of caw you
will be using in order to cut the wood at the given standard?
a. Rip saw c. Back saw
b. Crosscut saw d. Keyhole saw
29. With the numerous classifications of paints the one with flat finish used
only to paint wood is called ___________.
a. Flat wall enamel paint c. Trim paint
b. Cedar paint d. Shake paint
30. It is a substance that makes paint less heavy. Which one is it?
a. Pigment c. Vehicle
b. Dried d. Thinner
31. Chisels are only effective if they are driven. Which of the following hand
tool is used to drive them?
a. Chipping hammer c. Wooden mallet
b. Ball peen hammer d. Claw hammer
32. It is used in reducing the thickness or with of a piece of wood and for
smoothing surfaces.
a. Plane c. Chisel
b. Spoke shave d. Coping saw
33. In technology field especially if you are assigned to a workshop. 5S good
housekeeping is important. Which of the following are the 5S?
a. Seiri, Seiton, Sweep, Seiketsu, Shitzu
b. Seiri, Seiton, Seiso, Santize, Shitzu
c. Sort, Seiton, Sweep, Seiketsu, Shitzu
d. Seiri, Systematize, Seiso, Seiketsu, Shitsu
34. Buildings are necessarily constructed to be strong and safe. What do you
call the lowest support on which it rests?
a. Foundation c. Post
b. Floor d. Ceiling
35. It ensures the safety of the construction workers.
a. Signs, Signal & Barricades c. Exit Signs
b. Danger Signs d. Safety Instruction Signs
36. The smallest division of the metric scale that you can find in the steel rule
is ________.
a. Millimeter c. decimeter
b. Centimeter d. meter
37. A carpentry tool used to measure in getting the exact 45º and 90 º angles.
a. Trammel point c. Sliding T-bevel
b. Steel square d. Try square
38. Find the total number of board feet of five pieces of lumber with a
dimension of 2”x4”x12’.
a. 8 bd. ft c. 40 bd. ft
b. 96 bd. ft d. 480 bd. ft
39. It is a branch or limb of a tree that has been exposed when the log is cut.
a. Split c. Knot
b. Pitch pocket d. Shake
40. It is a lengthwise separation of the wood along the grain like small crack.
a. Split c. Knot
b. Pitch pocket d. Shake
2m
6m
a. 8 m2 c. 11 m2
b. 9 m2 d. 12 m2
a. 30 m3
3m b. 31 m3
c. 32 m3
d. 33 m3
2m
5m