Professional Documents
Culture Documents
Kistler - Biomecanica - Olataforma Fuerza Colombia
Kistler - Biomecanica - Olataforma Fuerza Colombia
Kistler - Biomecanica - Olataforma Fuerza Colombia
Description
Multicomponent force plate Type 9285BA consists of a base Technical Data
frame on which four piezoelectric 3-component force sensors
under a high preload are mounted. A 600x400 mm triple-layer Dimensions mm 600x400x150,4
composite glass plate is mounted on these sensors. The very Range Fx, Fy kN –2,5 ... 2,5
low crosstalk values of the sensors in conjunction with the spe- Fz kN 0 ... 10
cial design principle ensure very good accuracy of the center of Overload Fx, Fy kN –6/6
pressure. Type 9285BA has a built-in charge amplifier compat- Fz kN 0/12
ible with all of the common motion analysis systems. Linearity %FSO ≤±0,5
Hysteresis %FSO ≤0,5
Application Crosstalk Fx <–> Fy % <±2
This force plate is designed for special gait and balance analysis Fx, Fy –> Fz % <±2
applications. The glass plate allows simultaneous force meas- Fz –> Fx, Fy % <±0,5
urement and photographic or cinematographic recording of Rigidity x-axis (ay = 0) N/μm ≈120
the contact surface from below. Despite the wide measuring y-axis (ax = 0) N/μm ≈115
range (0 ... 10 kN), this force plate offers excellent accuracy z-axis (ax = ay = 0) N/μm ≈25
and linearity across the entire spectrum of applications and Natural frequency fn (x, y) Hz ≈300
guarantees overload protection up to 12 kN. A larger force fn (z) Hz ≈500
plate with external dimensions of 900x600 mm is available Operating temperature range ° C 0 ... 60
on request. Weight kg 45
Degree of protection EN 60529:1992 IP65
Refractive index of glass top plate n ≈1,52
9285BA_000-743e-02.10
Page 1/3
This information corresponds to the current state of knowledge. Kistler reserves ©2010, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
the right to make technical changes. Liability for consequential damage resulting Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
from the use of Kistler products is excluded.
Multicomponent Force Plate with Glass Top Plate for Biomechanics, Fz 0 ... 10 kN, Type 9285BA
Dimensions
COP
Fig. 2: This photograph taken through the glass plate from below
shows the main part of the standing phase of a step
9285BA_000-743e-02.10
Page 2/3
This information corresponds to the current state of knowledge. Kistler reserves ©2010, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
the right to make technical changes. Liability for consequential damage resulting Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
from the use of Kistler products is excluded.
Multicomponent Force Plate with Glass Top Plate for Biomechanics, Fz 0 ... 10 kN, Type 9285BA
Ch 1 = Fx 1+2 Ch 5 = Fz 1
Ch 2 = Fx 3+4 Ch 6 = Fz 2
Ch 3 = Fy 1+4 Ch 7 = Fz 3
Ch 4 = Fy 2+3 Ch 8 = Fz 4
Fig. 4: Configuration of a typical measuring chain with DAQ system provided by customer
2812A...
• Connection cable: 1760A5,
Force plate –> Control Unit 1760A10,
1760Asp
• Remote Control Unit 5233A2
• Mounting frame Z12627
Page 3/3
This information corresponds to the current state of knowledge. Kistler reserves ©2010, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
the right to make technical changes. Liability for consequential damage resulting Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
from the use of Kistler products is excluded.