Professional Documents
Culture Documents
424QUIZ1
424QUIZ1
424QUIZ1
1. The cathode in a corrosion cell is that part of the metal that corrodes (i.e.,
dissolves in the electrolyte).
A. True
B. False
2. The anode in a corrosion cell represents the location on the metallic surface
where oxidation or deterioration of the metal takes place.
A. True
B. False
A. True
B. False
A. True
B. False
A. True
B. False
A. True
B. False
7. Corrosion can only be controlled through the use of protective coatings and
cathodic protection.
A. True
B. False
I. increase.
II. decrease.
III. remain constant.
A. I only
B. II only
C. III only
D. I, II, and III
A. True
B. False
A. True
B. False
12. When there are conflicts between the manufacturer’s product data sheet
(PDS) and the coatings project specification, the manufacturer’s product
data sheet always supersedes.
A. True
B. False
A. I only
B. I and II only
C. I, II, and III only
D. I, II, and IV only
A. I and II only
B. II and III only
C. I and III only
D. I, II, and III
A. True
B. False
17. Surface temperatures and air temperatures are the first parameters
necessary to assess the risk of moisture formation on a substrate.
A. True
B. False
18. According to good painting practices and industry norms, the minimum
surface temperature for coating application is usually 5ºC (40ºF).
A. True
B. False
19. Dew-point is a function of air temperature and the relative humidity (RH).
A. True
B. False
20. Dew point can be calculated using the difference between the wet and dry
bulb (thermometers) readings.
A. True
B. False
A. relative humidity.
B. ambient temperature and wet bulb temperature.
C. substrate temperature and wet bulb temperature.
D. dew point.
24. Coating operations should NOT take place unless the substrate surface
temperature is at least
A. True
B. False