Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

850G-6PI Industrial Ethernet PoE Switch

Introduction
Proscend 850G-6PI Industrial Ethernet Switch enables the legacy Industrial network to evolve into a
full Gigabit Ethernet network, 850G-6PI not only offers 1000Mbps Ethernet speed over copper and
fiber but also the perfect quality of services, network security, and resilience, as well as reducing
network response time for mission-critical applications such as video security, transportation, energy,
etc.

850G-6PI featuring full Gigabit Ethernet, full manageability, network resilience, wide temperature,
DIN-rail mounting, fiber uplinks, and optional Power-over-Ethernet with 30 watts per Gigabit port. The
numbers of 10/100/1000Base-T port range from 4 for connecting industrial computers, HMI, PLC, IP
cameras, etc. The 2 SFP slots are used to work with SFP (Small form-factor pluggable) fiber
transceivers to scale out modern industrial networks with the ring, daisy chain, or tree topologies.

Features
◼ Embedded dashboard for real-time device monitoring
◼ Embedded topology map and friendly management on neighboring devices
◼ Operating temperature -10°C ~ 70°C
◼ Total PoE power budget 120W
◼ ERPS Ring failover protection (< 50 ms)
◼ Jumbo Frames
◼ DIN-rail

Specifications

Interfaces Traffic Control


◼ 4 x 10/100/1000BASE-T PoE RJ45 ◼ 802.1p QoS, Flow Control, Traffic Monitor
◼ 2 x 100FX/GbE SFP ◼ Storm Control, Port Isolation, Loop Detection
◼ DIP Switch ◼ Storm alarm threshold per port
◼ 6-PIN Terminal Block Security
Standards ◼ ACL
◼ IEEE 802.3 10BASE-T ◼ Port Security (MAC limit)
◼ IEEE 802.3u 100BASE-TX/FX ◼ Port-based 802.1X
◼ IEEE 802.3ab 1000BASE-T Ethernet ◼ BPDU Guard / Filter, ROOT Guard
◼ IEEE 802.3z 1000BASE-SX/LX ◼ Trusted Managed Host
◼ IEEE 802.3 Nway Auto-negotiation PoE/PoE+
◼ IEEE 802.3x Flow Control ◼ PoE Scheduling, PD Alive Check
◼ IEEE 802.1D STP ◼ PoE Power on/off, PoE Priority
◼ IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) ◼ Power budget control per system/port
◼ IEEE 802.1Q VLAN Tagging ◼ Power Delay
◼ IEEE 802.1p Class of Service Mechanical
◼ IEEE 802.1X Port Authentication ◼ Dimension (H x D x W): 160 x 120 x 50 mm
◼ IEEE 802.1AB LLDP ◼ Weight: 440g
◼ IEEE 802.3az Energy Efficient Ethernet (EEE) ◼ DIN-rail
◼ IEEE 802.3af Power over Ethernet ◼ Aluminum IP30
◼ IEEE 802.3at Power over Ethernet Plus
Power
Performance
◼ Triple power inputs, 48~57 VDC
◼ Jumbo Frame Size: 10KBytes
◼ System power consumption: 10W
◼ MAC Table Entries: 8K
◼ PoE Power Budget: 120W
◼ Switch Fabric: 12Gbps
◼ Alarm relay output: 1A @ 24 VDC

-1-
Reliability LED Indicators
◼ STP/RSTP ◼ Power input, PoE, Alarm
◼ ERPS v1/v2 ◼ Ethernet LAN Port Link & Speed, SFP Port Link
◼ Code redundancy Environment & Regulatory Compliance
Management ◼ Operation temperature: -10 to +70°C
◼ HTTP, HTTPS, CLI, Telnet, SSH ◼ Storage temperature: -40 to +85 °C
◼ SNMP v1, v2c, v3, Trap, Syslog, ◼ Humidity (non-condensing): 5 to 95% RH
◼ Management VLAN ◼ Vibration, Shock & Freefall: IEC60068-2-6, -27, -32
◼ LLDP ◼ EMI: FCC Part 15 Subpart B Class A, EN 55032 (class A),
◼ Web Firmware Upgrade, SNTP, DHCP Client EN55011 (2009 class A), EN 61000-6-4
◼ Port Mirroring ◼ EMS: EN 55035, EN 61000-6-2, EN 61000-4-2 (ESD), EN
VLAN 61000-4-3 (RS), EN 61000-4-4 (Burst), EN 61000-4-5
◼ 802.1Q VLAN (Surge), EN61000-4-6 (CS), EN61000-4-6 (PFMF)
◼ Port-based VLAN (Port Isolation)

Dimensions (Unit: mm)

Ordering Information

Model Name Description

Industrial 6-Port GbE Managed PoE Switch


850G-6PI
(802.3at PoE GbE x 4, GbE SFP x 2)

NOTE: Features and specifications are subject to change without prior notic e.

India Office:

Proscend Communication India Pvt Ltd

A-15, 2 nd Floor, FIEE Complex, Okhla Industrial Area, Phase -2, New Delhi-110020 Tel: +91 11 40343086, Email : sales.india@proscend.com

-2-

You might also like