Professional Documents
Culture Documents
Fluid Test 1
Fluid Test 1
4)If the diameter of capillary tube is doubled,the 11)Which one of the following is correct?
capillary rise will be:
The specific volume of water when heated from 0
a)doubled b)unaffected degree centigrade
5)The unit of dynamic viscosity in MKS system is b)first decrease and then increase
6)A fluid whose viscosity does not change with 12)Pinter ink comes under which type of fluid?
the rate of deformation or shear strain is known as
a)Reopectic fluid b)Thixotropic fluid
a)real fluid b)ideal fluid
c)psuedoplastic fluid d)diltant fluid
c)Newtonian fluid d)non Newtonian fluid
13)With increase in temperature the kinematic
viscosity of gas will be
a)Increases b)decrease c)10 to 15 RPM d)none
c)Remains constant d)First increase then decrease 21)Most stable compound of cement ,will produce
how much heat of hydration
14)Statement I:Pseudoplastic fluid is also known
as shear thickening fluid. a)420 J/gm b)500J/gm
c)Newton per meter square d)None of the abaove. c)High alumina cement d)Sulphat resisting
cement
16)In case of wetting fluid,the angle of contact
will be 23)What will be the rate of loading in case of
tensile test of cement
a)More than 90 degree b)Equals to 90 degree
a)35N/m2 per min b)10 to 12 N/m2 per min
c)less than 90 degree d)none of the above
c)1.2 to 2.4 N/m2 per min d) 18 to 20 N/m2 per
17)Determine the viscosity of a liquid having min
kinematic viscosity 6 stokes and specific gravity
1.9. 24)In case of High alumina cement ,what will be
the maximum percentage residual for unsoundness
a)10.4 b)11.40
a)10 % b)8%
c)14.4 d)18.4
c)5% d)none of the above
18)Find the kinematic viscosity of an oil having
density 981 kg/m3.the shear stress at a point in oil
is 0.2452 N/m2 and velocity gradient at that point
is 0.2 per second.