Professional Documents
Culture Documents
Shear Friction Design
Shear Friction Design
Distance (m) Vmax (kg) Mmin (kg-m) Mmax (kg-m) Distance (m) Vmax (kg)
0.00 27754.84 - - FOR Vmax 0.00 22945.97
0.00 - 0.00 - FOR Mmin 0.00 -
10.00 - - 124949.03 FOR Mmax 12.00 -
Distance (mm) Vmax (N) Mmin (N-mm) Mmax (N-mm) Distance (mm) Vmax (N)
0 272275 0 0 0 225100
1000 256025 0 256025000 26098.36901 1000 208850
2000 239775 0 479550000 2000 192600
3000 223525 0 670575000 3000 176350
4000 207275 0 829100000 4000 160100
5000 191025 0 955125000 5000 143850
6000 174775 0 1059150000 6000 127600
7000 158525 0 1136425000 7000 113100
8000 142275 0 1181200000 8000 98600
9000 126025 0 1197225000 9000 84100
10000 109775 0 1225750000 124949.0316 10000 69600
11000 115225 0 1221775000 11000 81150
12000 131475 0 1191800000 12000 97400
13000 147725 0 1139075000 13000 113650
14000 163975 0 1053850000 14000 129900
15000 180225 0 936125000 15000 146150
16000 196475 0 785900000 16000 162400
17000 210975 0 632925000 17000 176900
18000 225475 0 450950000 18000 191400
19000 239975 0 239975000 19000 205900
20000 254475 0 0 20000 220400
FOR FATIGUE LIMIT STATES FOR ALL LIMIT STATES
R AND MOMENT DUE TO TRUCK LOAD SHEAR AND MOMENT DUE TO LANE LOAD
000 mm BETWEEN 145000 N-AXLES) (LANE LOAD OF 9.3 kN/m PER 3.00 m LANE WIDTH)
Mmin (N-mm) Mmax (N-mm) Distance (mm) Vmax (N) Mmin (N-mm)
- - FOR Vmax 0 93000 -
0 - FOR Mmin 0 - 0
- 919200000 FOR Mmax 10000 - -
Mmin (kg-m) Mmax (kg-m) Distance (m) Vmax (kg) Mmin (kg-m)
- - FOR Vmax 0.00 9480.12 -
0.00 - FOR Mmin 0.00 - 0.00
- 93700.31 FOR Mmax 10.00 - -
Mmin (N-mm) Mmax (N-mm) Distance (mm) Vmax (N) Mmin (N-mm)
0 0 0 93000 0
0 208850000 1000 83700 0
0 385200000 2000 74400 0
0 534300000 3000 65100 0
0 661900000 4000 55800 0
0 757000000 5000 46500 0
0 819600000 6000 37200 0
0 849700000 7000 27900 0
0 861300000 8000 18600 0
0 843900000 9000 9300 0
0 885000000 10000 0 0
0 915100000 11000 9300 0
0 919200000 12000 18600 0
0 900550000 13000 27900 0
0 849400000 14000 37200 0
0 765750000 15000 46500 0
0 649600000 16000 55800 0
0 530700000 17000 65100 0
0 382800000 18000 74400 0
0 205900000 19000 83700 0
0 0 20000 93000 0
IMIT STATES
NT DUE TO LANE LOAD
m PER 3.00 m LANE WIDTH)
Mmax (N-mm)
- FOR Vmax
- FOR Mmin
465000000 FOR Mmax
Mmax (kg-m)
- FOR Vmax
- FOR Mmin
47400.61 FOR Mmax
Mmax (N-mm)
0
88350000
167400000
237150000
297600000
348750000
390600000
423150000
446400000
460350000
465000000
460350000
446400000
423150000
390600000
348750000
297600000
237150000
167400000
88350000
0
PROJECT : RED LINE BANGSUE-RANGSIT DESIGNED BY : DATE:
SUBJECT : CROSSBEAM DESIGN/ CONCOUSE LEVEL CHECKED BY : REV.
The norminal shear resistance Vni of the interface plane shall be taken as (AASHTO LRFD 2007):
Interface Type
1. For a cast-in-place concrete slab on clean concrete girder surfaces, free of laitance with surface roughened to an amplitude of 6 mm.
2. For normal-weight concrete placed monolithically
3. For lightweight concrete placed monolithically, or nonmonolithically, against a clean concrete surface, free of laitance with
surface intentionally roughened to an amplitude of 6 mm.
4. For normal-weight concrete placed against a clean concrete surface, free of laitance, with surface intentionally roughened
to an amplitude of 6 mm.
5. For concrete placed against a clean concrete surface, free of laitance, but not intentionally roughened
6. For concrete anchored to as-rolled structural steel by headed studs or by reinforcing bars where all steel in contact
with concrete is clean and free of paint
7. For brackets, corbels, and ledges, the cohesion factor, c, shall be taken as 0.0
Select Interface Type = 5
Acv = area of concrete considered to be engaged in interface shear transfer = 1.69E+06 mm2
Avf = area of interface shear reinforcement crossing the shear plane within the area Acv = 17676 mm2
bvi = interface width considered to be engaged in shear transfer = - mm
Lvi = interface length considered to be engaged in shear transfer = - mm
c = cohesion factor specified in Article 5.8.4.3 = 0.52 MPa
μ = friction factor specified in Article 5.8.4.3 (dim.) = 0.6
fy = yield stress of reinforcement but design value not to exceed 400 Mpa = 390 MPa
Pc = permanent net compressive force normal to the shear plane; if force is tensile, Pc = 0.0 N = 0 N
f ′c = specified 28-day compressive strength of the weaker concrete on either side of the interface = 45 MPa
K1 = fraction of concrete strength available to resist interface shear, as specified in Article 5.8.4.3. = 0.2
K2 = limiting interface shear resistance specified in Article 5.8.4.3 = 5.5 MPa
K1.fc'.Acv = 15210 kN
K2.Acv = 9295 kN
Vni = c.Acv + m(Avf.fy + Pc) = 5015 kN Vni<The lesser of K1.fc'.Acv and K2.Acv: OK
Design Vni = 5015 kN
For structures utilzing dry joints, the norminal capacity of the joint shall be calculated by AASHTO Guide Specifications for Design and Construction of Segmental Concrete Bridges 1999
For structures utilzing dry joints, the norminal capacity of the joint shall be calculated by AASHTO Guide Specifications for Design and Construction of Segmental Concrete Bridges 1999