Professional Documents
Culture Documents
Winter Products: Product Special
Winter Products: Product Special
Winter products
© September 2015. TVH Group NV, Brabantstraat 15, B-8790 Waregem. All rights reserved. No part of this catalogue may be reproduced or communicated
in any form or by any means, electronic or mechanical, including copying, recording or use in an information storage or retrieval system, without prior and
explicit permission of TVH Group NV. TVH is a supplier of after-market spare parts and accessories that are suitable for the maintenance and repair of OEM-
equipment. OEM-references and brands are purely indicative and do not imply that the accessories and/or spare parts are coming from the original equipment
or parts manufacturer. TVH® and TotalSource® are registered trademarks of TVH Group NV. Photographs and illustrations are included for reference purposes
only. Printing errors reserved. All sales are subject to the general terms & conditions of sale on www.tvh.com/avv.
2
CHECKLIST FOR WINTER
Make sure you have grip on snow or ice by using snow chains,
ice studs or shoe claws
Sweep away snow easily with our snow ploughs and yard
scrapers or use one of our sweepers or scoops to get rid of
snow
Make the area ice- and snow-free with spreaders, gritters and
other snow clearing accessories
Use our cab heaters to warm up your cab
Prevent the engine from being started cold: we have engine
preheaters, glow plugs and fuel heaters available
Don’t forget to renew the wiper blades/arms
Work comfortably thanks to our seats, seat covers and seat
heating
Check your batteries regularly. We have a complete
range of batteries, chargers and accessories
available
Use our professional start boosters to start each
type of vehicle
Have a look at our antifreeze and maintenance
products that might help you during cold winter days
Think of safety products for your vehicles and warehouse
Have a look at our extensive range of lights and bulbs
Protect yourself against cold and rain with our winter clothing
range
3
GRIP ON SNOW OR ICE
SNOW CHAINS
All snow chains are sold as a pair. Snow chains for other tyre sizes on demand.
Contact your sales advisor.
4
GRIP ON SNOW OR ICE
Check in advance if
there is enough space
between the wheel
and the mudguard of
Watch our the machine to mount
installation the snow chain. There
instructions! should be a distance of
minimum 40 mm.
TVH’s snow chains can very easily and quickly be fitted to the tyres? A correct installation of the
snow chains increases safety and prevents accidents.
It is highly recommended to always remove the wheels of the machine before the installation of the
chains. This hugely facilitates the installation of the chain.
When it concerns pneumatic tyres, please make sure that the tyres have been completely deflated.
This will also facilitate the installation of the chain.
The chains always have 2 removable D-shackles (pictures A & B) that can be used to lengthen or
shorten the chain. If the tyre is smaller or larger than the ERTRO standards, or if it has already worn
down considerably, then use the D-shackles to adjust the chain.*
* Our chains standard fit solid and pneumatic tyres. Disproportional tyres or heavily worn tyres however, might
have dimensions for which our chains are either too small or too big. TVH can not be held responsible for this.
A B
5
GRIP ON SNOW OR ICE
REF 115TA2133
With connecting snow chain (see picture)
REF 136TA1301
Rubber replaces the connecting chain
STARTING ASSISTANCE
The universal getaway-aid or starting assistance for passenger cars, vans and trucks.
A plus for security in extreme winter situations.
6
GRIP ON SNOW OR ICE
ICE STUDS
Studs are good for use on icy and hard, damped snow. Don’t use the studs in snow, there you must
use snow chains.
Studs can only be used outside, as driving inside can damage the floor due to the hardness of the
studs.
Count the number of contact patches on the tyre and make a strategy for fitting the studs. If
unsure, choose a shorter stud model. There are several sizes to fit various tread depths. Never fit a
stud that is too long for the tread depth, i.e. an 18 mm stud requires a 17 mm tread depth.
The stud is easily fitted and dismounted with a special installation tool that is supplied with the
product. The correct distance between the rubber and hard metal edge is 3 mm (standard setting of
the tool). This gives a margin of 2 mm down to the cord.
The projection may vary depending on the resistance of the rubber; in some cases the tool must be
reset.
WHEEL CHOCK
REF 147TA4293
• Capacity: 6,5 tonnes
• Dimensions (L x W x H): 465 x 200 x 220 mm
• Material: plastic
REF 147TA5104
Wheel chock holder
7
SNOW PLOUGHS
SNOW PLOUGHS
REF Blade width Blade height Min fork spread Max fork Weight
(mm) (mm) between forks (mm) section (mm) (kg)
147TA4102 1500 500 620 190 x 70 157
135TA2793* 1800 500 620 190 x 70 160
141TA1169 1800 500 620 190 x 70 180
135TA2795 2000 500 620 190 x 70 214
135TA2796 2400 500 620 190 x 70 239
* REF 135TA2793 has a fixed blade position, to sweep right inclined 30°
REF Blade width Blade Min fork Max fork Weight (kg) Wear pad
(mm) height spread section kit
(mm) between (mm)
forks (mm)
141TA7907 1800 730 420 180 x 65 180 147TA5115
141TA5227 2100 730 420 180 x 65 250 147TA5116
141TA9963 2400 730 420 180 x 65 289 147TA5117
8
SNOW PLOUGHS
1500
REF 147TA5118
55
• (L x H x T): 1500 x 100 x 30 mm
• Rubber, 5 layers ø13 (7x)
• Hardness 65 shore A
60 230 (6x)
• Predrilled with holes diameter 13 mm
1800
REF 144TA5426
55
2000
269 268,5 268,5 268,5 268,5 268,5 268,5 60
REF 144TA5428 235 235 235 235 235 235 235
• (L x H x T): 2000 x 100 x 30 mm
55
• Rubber, 5 layers
• Hardness 65 shore A
ø13 (15x)
• Predrilled with holes diameter 13 mm
9
SNOW PLOUGHS
2400
250 (9x) 75
REF 144TA5427
55
• (L x H x T): 2400 x 100 x 30 mm ø13 (20x)
• Rubber, 5 layers
• Hardness 65 shore A
253,3 (9x) 60
• Predrilled with holes diameter 13 mm
YARD SCRAPERS
REF Blade Blade Blade Min fork spread Max fork Weight
width height thickness between forks section
(mm) (mm) (mm) (mm) (mm) (kg)
139TA5941 2000 400 35 635 170 x 45 90
139TA5942 2650 400 35 635 170 x 45 130
10
ATTACHMENTS
11
ATTACHMENTS
All replacement
par ts available
Properties:
• Built-in hydraulic motor
• Wear-resistant HB400-steel
• High collection capacity
• Easy to empty by tipping the collector bin
• Height adjustment of the sweeper brush by means of 2 adjustable supports inside the collector bin
• Brush made of synthetic material or mixed synthetic/steel
Technical information:
Type 1 – Brush material: synthetic Type 2 – Brush material: mixed synthetic/steel
REF Brush width (mm) REF Brush width (mm)
141TA5215 1800 141TA5221 1800
141TA5216 2000 141TA5222 2000
141TA5217 2200 141TA5223 2200
141TA5218 2400 141TA5224 2400
141TA5219 2600 141TA5225 2600
141TA5220 2800 141TA5226 2800
We offer the Maxi Sweeper and all parts for other makes as well.
Please contact your sales team for more information.
12
ATTACHMENTS
FORK-MOUNTED SCOOP
1 2
1 Mechanical scoop
Suitable for loose materials such as sand, coal, grain, scrap metal …
• Max fork section: 170 x 60 mm
• Min distance between forks: 466 mm
REF Volume Length Width Height Depth Weight
(l) (mm) (mm) (mm) (mm) (kg)
141TA1166 600 1873 965 606 1293 250
141TA1304 800 1873 1400 606 1293 280
141TA1167 1000 1873 1710 605 1293 310
141TA1168 1200 1873 1910 606 1293 331
2 Hydraulic scoop
Suitable for products sensitive to damage
• Max fork section: 185 x 70 mm
• Min distance between forks: 660 mm
REF Volume Width Height Depth Weight
(l) (mm) (mm) (mm) (kg)
141TA2233 950 1460 772 1394 335
141TA2234 1100 1840 772 1394 360
REF 24369772
More attachments and handling equipment in our
’Attachments & handling equipment’ catalogue: go to
downloads on www.tvh.com or order your free copy.
13
SPREADERS & GRITTERS
REF 141TA7352
• Gritting range: 2–6 m
• Capacity: 300 kg
• Volume: 249 l
• Can be used with salt and grit
• Width: 1080 mm
• Height: 1260 mm
• Weight: 52 kg
• Pneumatic rubber tyres
• Coupling for lift truck and trailer
14
SPREADERS & GRITTERS
REF 136TA8336
• Gritting range: 1–3 m
• Capacity: 30 kg
• Volume: 20 l
• Can be used with salt and grit
• Width: 430 mm
• Height: 800 mm
• Weight: 6 kg
• Solid tyres
• Manual model
REF 138TA8173
• Gritting range: 2–4 m
• Capacity: 45 kg
• Volume: 30 l
• Can be used with salt and grit
• Width: 510 mm
• Height: 940 mm
• Weight: 7 kg
• Pneumatic rubber tyres
• Manual model
REF 116TA6155
• Gritting range: 1-9 m
• Capacity: 360 kg
• Volume: 265 l
• Max output: 80 l/min
• Can be used with salt and grit
• Weight: 90 kg
• Max fork section: 200 x 70 mm
• Min oil consumption: 15 l/min
• Driven by lift truck hydraulic system
15
SNOW CLEARING ACCESSORIES
REF Description
139TA3291 Scoop for salt
139TA3167 De-icing salt (25 kg)
SNOW SHOVEL
REF 139TA3166
• Lacquered metal shaft
• Aluminium shovel edge
• Total height: 1450 mm
• Blade dimensions (W x H): 550 x 385 mm
REF 141TA7680
• Telescopic arm
• Dimensions: 900 mm (closed) – 1180 mm (open)
16
CAB HEATERS
• 1800 kcal/h
• Power: 30 W
• Water hose fitting: Ø 12 mm
• Air movement: 114 m³/h
• Dimensions (L x W x H): 350 x 120 x 120 mm
• Housing: ABS
• 64 dB
• Weight: 1,7 kg
• Ideal for cab heating and demisting (possible to switch
air flow direction)
• Works on vehicle water system
REF Description
107TA5029 12 V
107TA7866 24 V
107TA8357 Mounting kit Easy installation
• 3600 kcal/h
• Power: 70 W
• Air movement: 290 m³/h
• 2-speed fan (adjustable)
• Pressure: max 30 bar
• Housing: ABS
• 65 dB
• Weight: 1,6 kg
• Also provides cooled air, ideal for cab volume < 2 m³
• Works on vehicle water or oil system
REF 107TA8358
Mounting kit for Linde 351 (12 V – oil)
REF 107TA8359
Mounting kit for use with water (for 12–24 V)
17
CAB HEATERS
REF Description
107TA7873 48 V – rating: 1600 W
107TA7874 80 V – rating: 2000 W
REF Description
135TA2797 12 V cab heater (mounting kit included)
135TA2798 24 V cab heater (mounting kit included)
18
CAB HEATERS
19
CAB HEATERS
• 3-speed fan
• Water hose fitting: diameter 16 mm EVO2 E
• Voltage: 12 V
• Brand: Kalori
REF 141TA7755 – 12 V
REF 141TA7756 – 24 V
• Electrical power: 70 W
• Performance: 4,3 kW
• Air flow: 230 m³/h
• 3-speed fan (valve and 3-speed switch included)
• Water hose fitting: diameter 16 mm
• Weight: 2,5 kg
• Brand: Kalori
20
BLOWERS
21
CAB PROTECTION
REF 123TA8897
• Protection from debris and rain
• More coverage with the see-through visor
• Attaches to all forklift trucks in seconds
• Dimensions: 1340 x 1170 mm
PVC WEATHERGUARD
1092 mm
1143 mm
889 mm
Side Back
1372 mm 1168 mm
REF 116TA5837
889 mm
Side Back
CANOPY
REF 107TA5227
• Transparent plastic
• Dimensions: 1 x 1 m
• To install, unfold the canopy and stretch over the existing
overhead guard
22
ENGINE PREHEATER & GLOW PLUGS
ENGINE PREHEATER
Advantages:
• Reduced emission of carbon dioxide
• Reduced engine wear and fuel consumption
• On machines equipped with a cab heater: faster heat emission by the heater (the water is already
warmed up)
GLOW PLUGS
Look up Look up
these parts via these parts via
Problems with the glow plugs are common in winter time because
of the low temperatures.
If you don’t have the reference, you can look up the right glow plug:
• Go to downloads on www.tvh.com to find our ‘Engine parts’
catalogue (REF 20177485)
• Go to MyProductSearch via MyTotalSource
• Or contact your sales advisor
23
FUEL HEATER
FUEL HEATER
REF 147TA4251
• Makes starting easier
• Operates on fuel
• Facilitates the flow of diesel
• Automatic temperature control
• Diameter: 23 mm
• Length: 175 mm
• 10,7 A – 12 V
24
WIPER BLADES
Universal mounting
REF Length (mm)
107TA7927 280
139TA3222 300
139TA1919 330
139TA1920 350
139TA1921 400
139TA1922 450
138TA6561 500
139TA1923 550
139TA1924 600
122TA7038 700
WIPER BLADES
WIPER BLADES
25
WIPER ARMS
Universal mounting
REF Length (mm) Diameter
122TA7047 300 - 400 Ø 6 mm
122TA7048 400 - 500 Ø 6 mm
122TA7049 300 - 400 Ø 8 mm - M6
122TA7050 400 - 500 Ø 8 mm - M6
122TA7051 400 - 500 Ø 10 mm - M8
26
WIPER ARMS
27
SEATS & SEAT COVERS
WATER-REPELLENT SEAT
REF 135TA2792
• Universal model
• Dimensions (W x H x D): 470 x 500 x 520 mm
• Made of polyurethane
• Finished with a water-repellent coating
• Equipped with a drain
• Commonly used on MOFFETT truck-mounted lift trucks
• Without slide rails (matching slide rails: REF 106TA8625)
Ideal for lift trucks without a sealed cab that are frequently subject to heavy rainfall
REF 106TA6749
With openings for headrest and documents
28
SEAT HEATING
SEAT HEATING
REF 106TA8617 – 12 V
REF 106TA8618 – 24 V
REF 106TA8619 – 48 V
• For KAB, BEGE … seats
• To fit in seat and in back cushion
• With thermostat
SEAT HEATING
REF 106TA8620
• 12 V
• To fit on top of seat cushions with thermostat
• The heat cushion contains two connected elements,
back and seat element
• A temperature regulator in the current circuit of the
seat element is energized at 20 ± 3,3 °C and opens at
28,3 ± 2,8 °C
Optional
REF 139TA7282
• Socket 1-pole connector with flat cable
2 x 0,75 mm² - 1,8 m
• 12 V
• Max 8 A
29
SEAT HEATING
HEATED SEATS
REF 24261715
Go to downloads on www.tvh.com to find our ’Seats &
accessories’ special or order your free copy.
30
BATTERIES & ACCESSORIES
TERMINAL LOCATIONS
Type A Type B Type C Type D Type E Type F
– + – +
+ – + + – – + –
31
BATTERIES & ACCESSORIES
32
BATTERIES & ACCESSORIES
E5
REF 134TA8573
E3
REF 134TA8571
E2
REF 134TA8570
E1
REF 134TA8569
• State-of-charge indicator
• Increased performance + 30%
• Calcium technology
• 100 % maintenance-free
• Minimal water consumption
Dimensions (mm)
Y X
12 V
Length Width Height
(X) (Y) (H)
134TA8569 E1 50 480 207 175 175 B
134TA8570 E2 65 580 242 175 175 B
134TA8571 E3 75 730 278 175 175 B
134TA8572 E4 80 750 310 175 175 B
134TA8573 E5 100 850 353 175 175 B
144TA1468 E5H 100 860 353 175 190 B
33
BATTERIES & ACCESSORIES
JUMPER CABLES
REF 134TA8692
Battery tester 6 V – 12 V 100 A 1000 CCA
REF 134TA9538
Tester for 6 V and 12 V batteries, testing of 12 V and 24 V
load systems
34
BATTERIES & ACCESSORIES
REF 145TA1761
• Voltage: 12 V
• Charging amps: 7 A
• Battery capacity charge: 14–130 Ah
• Battery capacity maintenance: 14–230 Ah
• Voltage: 24 V
• Charging amps: 3,5 A
• Battery capacity charge: 14–60 Ah
• Battery capacity maintenance: 14–120 Ah
HIGH‑PRECISION DENSIMETER
1 2 3
4 5
With a hydrometer you measure the weight of the acid in the battery, this gives an
indication of the water level in the battery.
3 REF 142TA8267
• Robust hydrometer
• Baumé scale division and specific gravity
• Acidity indication by means of colours
35
START BOOSTERS
2
1
Professional start booster to start any type of vehicle, from engine-powered lift trucks,
over aerial work platforms, to cars. Even if there is no battery or if the battery is
completely discharged.
Select your booster according to your machine by means of the required peak
amperage (cranking current).
Fig REF Volt Start Peak Maximum Car plug Output - Weight Dimensions
Ampere Ampere discharge output fuse (mm)
12 V
2340 A – 12 V 6200 A – 12 V
3 147TA4371 12/24 V 28,08 kW 16 A 500 A 22,79 kg 440 x 320 x 220
1170 A – 24 V 3100 A – 24 V
2400 A – 12 V 5400 A – 12 V
4 147TA4372 12/24 V 28,80 kW 16 A 500 A 29,11 kg 540 x 410 x 260
1200 A – 24 V 2700 A – 24 V
6400 A – 12 V 15 500 A – 12 V
5 147TA4373 12/24 V 64,5 kW 16 A 500 A 69,80 kg 1100 x 610 x 650
3200 A – 24 V 7750 A – 24 V
36
ANTIFREEZE PRODUCTS & ACCESSORIES
REF 107TA1692
• 10 l
• For cooling circuits of thermal engines
• Based on monoethylene glycol
• Concentrated product
• Must be diluted to the recommended ratio before use
(preferably with deionised water REF 106TA8676)
• 20% antifreeze: protects in temperatures as low as -10 °C
• 30% antifreeze: protects in temperatures as low as -15 °C
• 50% antifreeze : protects in temperatures as low as -36 °C
• Type Classic – G11
ANTIFREEZE – RED
REF 140TA9059
• 10 l
• For cooling circuits of thermal engines
• Based on monoethylene glycol and organic corrosion
inhibitors to protect all metals used in a modern engine
• Concentrated product
• Must be diluted to the recommended ratio before use
(preferably with deionised water REF 106TA8676)
• 33% antifreeze: protects in temperatures as low as -20 °C
• 40% antifreeze: protects in temperatures as low as -26 °C
• 50% antifreeze: protects in temperatures as low as -37 °C
• 68% antifreeze: protects in temperatures as low as -69 °C
• Type D – G12
37
ANTIFREEZE PRODUCTS & ACCESSORIES
COOLANT – CLASSIC
REF 107TA1691
• 5 l
• For cooling circuits of thermal engines
• Based on monoethylene glycol
• This coolant is already diluted and is ready to use
• Protects in temperatures as low as -28 °C
• Type Classic – G11
COOLANT - RED
REF 139TA5995
• 5 l
• For cooling circuits of thermal engines
• Based on monoethylene glycol and organic corrosion
inhibitors to protect all metals used in a modern engine
• Strongly recommended for engines of the latest
technology, in which the protection of aluminium at high
temperatures is important
• This coolant is already diluted and is ready to use
• Protects in temperatures as low as -28 °C
• Type D – G12
38
ANTIFREEZE PRODUCTS & ACCESSORIES
ANTIFREEZE TESTER
Technical information:
• Suction volume: 52 ml
• Overall length: 155 mm
• Suction hose length: 200 mm
• Weight: 130 g
Applications:
REF 107TA1690
For propylene glycol (propanediol)/water mixtures for cooling systems in heating systems and solar
systems. Measuring range: -5 °C to -35 °C.
REF 142TA8270
For ethylene glycol (ethanediol)/water mixtures for cooling systems in cars, trucks, heating systems,
solar systems. Measuring range: -5 °C to -40 °C
REF 145TA2252
The HYDROVOLT battery tester is a heavy-duty, chemical-
resistant hydrometer which is direct reading and accurate
at all electrolyte temperatures. Its advanced design
incorporates important practical features which simplify
battery service as never before:
• Handy compact size for use with hard-to-get-at batteries
• Large, easy-to-read scale with quick-check colored sectors
• Readings independent of vertical positioning of
instrument
• Fast, bubble-free intake of fluid sample
• Automatic air-lock prevents fluid loss and air bleed
• Unexcelled temperature compensation and measuring
accuracy
• Sturdy, shock-resistant materials, completely
non-corrosive
39
ANTIFREEZE PRODUCTS & ACCESSORIES
TESTER CASE
REF 107TA1689
• Three instruments protected in a handy case:
−− Antifreeze tester for the radiator circulation
−− Antifreeze tester for the windscreen washer units
−− Battery acid tester for the state of charge of the battery
• Easy to transport
• Safe to store at home, in the car or in the workshop
• Extra probe for battery acid tester or antifreeze tester for
windscreen washer units: 130 mm, diameter: 3,1 mm
Technical information:
• Radiator circulation
−− Antifreeze measuring range: -5 °C to -40 °C
• Windscreen washer unit:
−− Antifreeze measuring range: 0 °C to -40 °C
−− Graduations: 0,005 g/ml
• Battery acid:
−− Density measuring range: 1,10 to 1,30 g/ml
−− Graduations: 0,01 g/ml
• Case dimensions: 325 x 275 x 55 mm
• Case weight: 750 g
40
ANTIFREEZE PRODUCTS & ACCESSORIES
REF 144TA3706
• To check circuit (pipes, joints, pumps, radiators) for leaks
under pressure
• To quickly fill circuit, avoiding air bubble formation
41
MAINTENANCE PRODUCTS
REF 107TA7933
• 5 l
• Antifreeze screenwash
• This screenwash is already diluted and is
ready to use
REF 139TA3290 • Quickly and easily removes dirt and insects
• 500 ml from your windscreen
• A high‑performance de‑icer spray, suitable • Prevents the windscreen and spray nozzles
for use on vehicle windscreens. Contains from freezing
antifreeze to help prevent refreezing • Protects in temperatures as low as -24 °C
REF 107TA1989
• 500 ml
• Lubricates and protects injectors and fuel
pump
• Increases cetane number
• Improves fuel combustion
• Avoids rust and corrosion formation in the
REF 107TA8512 injection system
• 1 l • Reduces black exhaust smoke formation in
• Diesel oil antifreeze anticoagulation the injection system
additive • Has a dispersant action on water and
• 1 l per 1000 l diesel impurities present in diesel fuels
• Prevents formation of paraffincrystals in • Add 1 bottle of 500 ml every 2 to 3
diesel in cold weather refuelling stops
42
MAINTENANCE PRODUCTS
QUICK START
REF 107TA1816
• 400 ml
• High-quality tool for starting problems with internal
combustion diesel and petroleum engines
HYDRAULIC OIL
REF 107TA7211 – 1 l
REF 107TA7212 – 5 l
• Recommended for all kind of hydraulic systems
operating under high pressure and high temperature
• Easy start-up at low temperature (-30 °C) for equipment
operating outside
• High viscosity index anti-wear hydraulic oil with
international specifications:
−− Afnor NF E 48-603 HV
−− ISO 6743/4 HV
−− DIN 51524 P3 HVLP
−− Cincinnati Milacron P68, P69, P70
−− Vickers M-2950S, -I-286
REF 144TA3717
• 500 ml
• Prevents freezing of condensation in the brake
system
• Protects against corrosion
• Lubricates the brake valves
43
MAINTENANCE PRODUCTS
START PILOT
REF 143TA7391
300 ml
2-26 ELECTRO
REF 143TA6919
• Multi-purpose maintenance for electrical equipment
• Prevents electrical and electronic malfunction caused by
water penetration, humidity, condensation or corrosion
• 500 ml
REF 21713862
Consult chapter 4 ‘Consumables’ in our ’Consumables &
accessories’ catalogue for more maintenance products.
44
SAFETY
REF 134TA8265
Dimensions: 600 x 400 mm
REF 107TA8178
Dimensions: 800 x 600 mm
REF 134TA8266
Dimensions: 1000 x 800 mm
45
VEHICLE SAFETY
• Width: 50 mm
• Length: 50 m
• In conformity with EEC u.n. 104 and EEC 48 regulations
Colour For use on hard For use on
surfaces canvas surfaces
(fabric, curtains)
White REF 141TA6745 REF 147TA4290
Yellow REF 141TA6746 REF 147TA4291
Red REF 141TA6747 REF 147TA4292
REF 107TA8126
• Width: 25 mm
• Length: 18,3 m
REF 107TA8127
• Width: 50 mm
• Length: 18,3 m
46
VEHICLE SAFETY
TRAILER PANELS
1 2
Rear reflecting and reflecting panels for trailers in conformity with ECE 70.01 RR* regulations
LIFTCAM™
REF 140TA8766
Wireless camera system for lift trucks and
other industrial machines
• Quick & easy installation
• No need for cables; no special cable reel
needed, no more broken cables
• Digital transfer of data: no interference or
distortion of the signal
• The camera can transfer the images via the
Scan this QR code to
wireless digital connection to the monitor,
view our liftCam movie
with a range of 150 m in open air
or visit ‘Downloads’ on
• High battery capacity with clear power
www.tvh.com
indicator
Extra
8G 82°
47
VEHICLE SAFETY
1
2
1 REF 143TA4317
• Non-rechargeable version
• Powered by battery CR123A (REF 143TA4318)
3
2 REF 141TA7068
Rechargeable via universal charger
3 REF 141TA7069
• Case with 6 pieces
• Rechargeable (case recharges all 6 LED lights
simultaneously)
REF 143TA7778
Rechargeable light without charger
Characteristics:
• Height: 34 mm
• Ø 106,50 mm
• 9 different flashing patterns
• Shock-resistant
• Magnetic
• Water-resistant
• With universal charger
48
WORKLIGHTS
The life span of worklights is determined by the cooling. TVH only supplies lights with a
reliable cooling.
49
WORKLIGHTS
REF 141TA9964
• Nominal power: 17 W
• 12-80 V
• Theoretical light output: 1100 lumen 100mm (3.9") 76mm (3.0")
• Operating light output: 750 lumen
• LED: 4 pieces
103mm (4.1")
• Housing: aluminium
122mm (4.8")
• Lens: transparent plastic
• Overheating protection
• M10 mounting bolt
• With DT connectors
• IP68
REF 142TA8015
• Nominal power: 18 W
• 10-30 V
• Theoretical light output: 1000 lumen
• Operating light output: 850 lumen
• LED: 4 pieces
• Housing: aluminium
• Lens: hardened glass
• With AMP connectors
• IP68
50
WORKLIGHTS
51
WORKLIGHTS
52
WORKLIGHTS
53
WORKLIGHTS
145 mm (5-3/4”)
171 mm (6-3/4”)
• HID-xenon 35 W bulb
• Housing: high-impact nylon
• Stainless steel mounting bracket with rubber cushion
• Internal ballast/igniter unit
REF 142TA1265
HID-xenon 35 W bulb
54
LIGHTS
LIGHT SENSOR
REF 134TA8374
• Available in 12 V
• Estimated installation time: 1 hour
Advantages:
• Ensures good mutual visibility: see and be seen
• Offers clear visibility in all circumstances
• Immediate reactivity: the lights come on as soon as the
vehicle enters a tunnel
• Automatic light control for a more comfortable drive
• The system takes care of your lighting
REF 143TA7112
• 4 high powered 10 W CREE LED lights – 2500 lumen
• Flood lens included
• Shock-resistant nylon housing
• Heat-resistant
• 14,4 V – 5000 mAh Li-ion battery pack with charge and
overcharge protection
• Carrying case with accessories: battery, adapter, strap,
flood lens
• Dimensions (L x W x H): 268 x 114 x 147 mm
• IP55
55
LIGHTS
REF 138TA3958
• 18 LED + spot 6 LED
• Magnetic base
• 120° adjustable
• 180° rotate
• AC adapter 4,3 V
• Li‑ion battery 3,6 V 1000 mAh
• Not waterproof
56
LIGHTS
LED TORCHES
2
3
The new Mini MagLite® LED and MagLite® LED flashlight are crafted after the legendary (Mini)
MagLite® flashlight. Its durability and patented features are now available with the new MagLED®
Technology. For the mini MagLite® LED you have the super bright 2-cell AA. The MagLite® LED is
available in 2 & 3 cell D size.
REF 22775197
Need more light?
Go to downloads on www.tvh.com to find our ’LED lights’
special or order your free copy.
57
HANDHELD WORK LAMPS & TORCH LIGHTS
REF 139TA3251
• 3 W high-powered LED
• Housing: aluminium
• Light output: 170 lumen
• 3 lighting modes: turbo/general/strobe
• Use of 3 standard AAA/LR03 batteries
(batteries included)
• Waterproof to 100 m (300 ft)
• Total length: 130 mm
• 15° lens
REF 139TA3253
• 5 W high-powered LED
• Housing: aluminium
• Light output: 210 lumen
• 3 lighting modes: turbo/general/strobe
• Rechargeable lithium-ion battery
• Waterproof to 100 m (300 ft)
• Total length: 150 mm
• 15° lens
58
HANDHELD WORK LAMPS & TORCH LIGHTS
REF 139TA3254
• 12 W high-powered LED
• Housing: aluminium
• Light output: up to 850 lumen
• 3 lighting modes: turbo/general/strobe
• Rechargeable lithium-ion battery
• Waterproof to 100 m (300 ft)
• 20° spot beam with original reflector & 35° flood beam
with included glass diffuser to suit different purposes
• Total length: 200 mm
REF 139TA3256
• 60-LED handheld work lamp
• Light output: 180 lumen
• Autonomy: up to 4 hours on a full charge
• Recharging time: 6 to 8 hours
• With charge indicator
• With swivel hooks and charge base
• Total length: 390 mm
59
HANDHELD WORK LAMPS & TORCH LIGHTS
REF 139TA3258
• 3 W CREE LED
• Light output: 160 lumen
• Use of 3 standard AA/LR03 batteries
(batteries included)
• Black and orange housing
• ABS – aluminium
• 3 lighting modes: turbo/general/strobe
• Weight: 76 g
• Zoom: x 2000
• Dimensions (L x W x H): 550 x 650 x 430 mm
REF 139TA3257
• 30-LED handheld work lamp
• Light output: 100 lumen
• Autonomy: 4 hours
• Recharging time: 4 to 6 hours
• With charge indicator
• With rubber surface cover
• Total length: 28,5 cm
60
BULBS
PHILIPS BULBS
XENON BULBS
61
WINTER CLOTHING
WINTER GLOVES
REF 107TA8084
• Cat I
• Winter working gloves with fur lining
• Suitable for construction
• One size: 11
WINTER GLOVES
62
WINTER CLOTHING
REF 144TA3722 – M
REF 144TA3721 – L
REF 144TA3723 – XL
• Made of PU nylon
• Colour: black
CAP
REF 147TA5101
• Made of acrylic fibre, lined in Thinsulate™
• Colour: black
• Unisize
BALACLAVA
REF 141TA7691
• For work in cold conditions, keeps you dry and warm
• Maximum moisture transport & quick-drying
• Naturally anti-bacterial
• Insulating Merino wool (57% Merino wool –
43% polypropylene)
63
WINTER CLOTHING
THERMAL UNDERWEAR
WINTER OVERALL
REF 139TA6705 – L
REF 139TA6706 – XL
• Type: SN MATTERHORN 6402
• Norm EN 342: protective clothing against the cold
• Material: 55% polyester – 45% cotton = outside fabric
• Isosoft lining: polyester fibre
• Colour: navy blue corn
• Protection to -40 °C
• Extra protection and lining at the shoulders, elbows and
knees
• High Tech thermal insulating lining
• Fleece inside collar
• Zipper under flap, chest pocket, 2 patched pockets and
1 pen pocket
• Ankle narrowing with velcro closure
• Elastic waist
64
WINTER CLOTHING
RAIN CLOTHING
65
WINTER CLOTHING
BODYWARMERS
REF 144TA4194 – S
REF 144TA4195 – M
REF 144TA4196 – L
REF 144TA4197 – XL
REF 144TA4198 – XXL
REF 144TA4199 – XXXL
• Colour: navy blue
• Material: 100% polyester
REF 21713862
Consult chapter 3 ‘Clothes’ in our ’Consumables & accessories’
catalogue for more workwear and clothes.
66
WINTER CLOTHING
67
ALL INFO YOU NEED AT HAND
WE SPEAK YOUR
LANGUAGE
info@tvh.com
Find all product information you need in our catalogues and brochures.
01 Safety 07 Powertools
03 Clothes 09 Vehicles
04 Consumables 10 Measuring
05 Warehouse 11 Outdoor
REF 21713862
06 Handtools 12 Promotional ‘Consumables & accessories’ catalogue