Professional Documents
Culture Documents
Kty 10
Kty 10
KTY 10-x KTY 11-x KTY 13-x KTY 21-x KTY 23-x KTY 19-6
Features Temperature dependent resistor with positive temperature coefficient Temperature range 50 C to + 150 C ( 60 F to 300 F) Available in SMD or leaded or customized packages Linear output Excellent longterm stability Polarity independent due to symmetrical construction Fast response time Resistance tolerances (R25) of 3% or 1%
SOT-23
Modified TO-92
TO-92 Mini
SOT-23
KTY 16-6
KTY 19-6
1:1
Data Sheet
2000-07-01
Standard Packages Type KT 100 KT 110 KT 130 KT 210 KT 230 KTY 10-5 KTY 10-6 KTY 10-62 KTY 10-7 KTY 11-5 KTY 11-6 KTY 11-7 KTY 13-5 KTY 13-6 KTY 13-7 KTY 21-5 KTY 21-6 KTY 21-7 KTY 23-5 KTY 23-6 KTY 23-7 Marking KT 100 T1 T1 N1 N1 KTY 10-5 KTY 10-6 KTY 10-62 KTY 10-7 T5 T6 T7 T5 T6 T7 N5 N6 N7 N5 N6 N7 Ordering Code Q62705-K331 Q62705-K332 Q62705-K333 Q62705-K334 Q62705-K335 Q62705-K110 Q62705-K132 Q62705-K71 Q62705-K111 Q62705-K245 Q62705-K246 Q62705-K247 Q62705-K249 Q62705-K250 Q62705-K251 Q62705-K258 Q62705-K259 Q62705-K260 Q62705-K262 Q62705-K263 Q62705-K264
R25 min
1940 1940 1940 970 970 1950 1980 1990 2010 1950 1980 2010 1950 1980 2010 975 990 1005 975 990 1005
R25 max
2060 2060 2060 1030 1030 1990 2020 2010 2050 1990 2020 2050 1990 2020 2050 995 1010 1025 995 1010 1025
Package TO-92 TO-92 Mini SOT-23 1) TO-92 Mini SOT-23 1) TO-92 TO-92 TO-92 TO-92 TO-92 Mini TO-92 Mini TO-92 Mini SOT-23 1) SOT-23 1) SOT-23 1) TO-92 Mini TO-92 Mini TO-92 Mini SOT-23 1) SOT-23 1) SOT-23 1)
R25 min
1980 1980 1980
R25 max
2020 2020 2020
Electrical contact between Pin1 and Pin2 (refer to package outlines drawing).
Data Sheet
2000-07-01
Absolute Maximum Ratings Parameter Maximum operating voltage 1) TA 25 C, t 10 ms Maximum operating current Peak operating current Symbol KT 1x0 KT 2x0 Unit KTY 1x-x KTY 2x-x 25 5 7 7 10 50 + 150 50 + 150 V mA mA C C
TA 25 C, t 10 ms
Operating temperature range Storage temperature range
1)
When the temperature sensor is operated with long supply leads, it should be protected through the parallel connection of a > 10 nF capacitor to prevent damage to the sensor through induced voltage peaks.
Electrical Characteristics Iop = 1 mA Thermal Time Constant (); (63% of T) KT 100, KTY 10-x KT 110, KT 210, KTY 11-x, KTY 21-x KT 130, KT 230, KTY 13-x, KTY 23-x KTY 16-6 KTY 19-6M/Z air (typ.) 40 11 7 40 40 oil (typ.) 4 1.5 1 4 4 Unit s
Data Sheet
2000-07-01
General Technical Data: KT- and KTY-Series Temperature Sensors These temperature sensors are designed for the measurement, control and regulation of air, gases and liquids within the temperature range of 50 C to + 150 C. The temperature sensing element is an n-conducting silicon crystal in planar technology. The gentle curvature of the characteristic, RT = f (TA), is described as a regression parabola in the following expressions. The resistance of the sensor can be calculated for various temperatures from the following second order equation, valid over the temperature range 30 C to + 130 C.
R T = R 25 ( 1 + T A + T A2 ) = f ( T A )
with: = 7.88 10 3 K 1; = 1.937 10 5 K 2 The temperature factor kT can be derived from this:
RT k T = ------- = 1 + T A + T A2 = f ( T A ) R 25
The temperature at the sensor can be calculated from the change in the sensors resistance from the following equation, which approximates the characteristic curve. 2 4 + 4 k T T = 25 + --------------------------------------------------------------------- C 2
Data Sheet
2000-07-01
TA
C 50 40 30 20 10 0 10 20 25 30 40 50 60 70 80 90 100 110 120 130 140 150
1) Normalising point
kT
min. 0.506 0.559 0.615 0.676 0.741 0.810 0.883 0.960 1.039 1.119 1.204 1.291 1.383 1.478 1.577 1.680 1.786 1.896 2.010 2.093 2.196 typ. 0.518 0.570 0.625 0.685 0.748 0.815 0.886 0.961 1.0 1) 1.040 1.123 1.209 1.300 1.394 1.492 1.594 1.700 1.810 1.923 2.041 2.128 2.235 1.041 1.126 1.215 1.308 1.405 1.506 1.611 1.720 1.833 1.951 2.072 2.163 2.274 max. 0.530 0.581 0.635 0.694 0.755 0.821 0.890 0.962
Data Sheet
2000-07-01
Typical Dependence of Sensor Resistance on Supply Current Example: KTY 10-6 in oil at TA = 25 C
Typical Dependence of Sensor Resistance on Supply Current Example: KTY 21-6 in oil at TA = 25 C
Data Sheet
2000-07-01
Typical Deviation of Sensor Resistance from the Basic Resistance R25 (IB = 1mA) Versus Supply Current Example: KTY 10-6 in oil at TA = 25 C
Typical Deviation of Sensor Resistance from the Basic Resistance R25 (IB = 1mA) Versus Supply Current Example: KTY 21-6 in oil at TA = 25 C
Data Sheet
2000-07-01
Data Sheet
2000-07-01
5.2 -0.2
0.5 0.2 5.2 14.5 -1
4.2 -0.2
1.5 +0.2
0.4+0.05
GPD05636
TO-92 Mini
2.1-0.2 1 1.9-0.2 2 (1.9) 1.7-0.2
0.928
0.9 0.1
Weight approx. 0.02 g
Sorts of Packing Package outlines for tubes, trays etc. are contained in our Data Book Package Information. Data Sheet 9
10
Dimensions in mm 2000-07-01
2 C 0.95 1.9
0.08...0.15
2... 30
0.25
Weight approx. 0.01 g
B C
Pins 1 - 2: R25
0.20
3 0.15
1.1 1
3 1
abisoliert/ stripped
0.4
GPD05638
Sorts of Packing Package outlines for tubes, trays etc. are contained in our Data Book Package Information. SMD = Surface Mounted Device Data Sheet 10
100 5
12 0.5
KTY 16-6
Dimensions in mm 2000-07-01
KTY 19-6M/Z
SW17 12
17
13.5
30 0.2
GMX05639
Weight approx. 20 g
Sorts of Packing Package outlines for tubes, trays etc. are contained in our Data Book Package Information. Data Sheet 11
Dimensions in mm 2000-07-01