Professional Documents
Culture Documents
Build PROP
Build PROP
Mobile Apps
UI Kits
Tutorials
About Us
Blog
Mobile Apps
UI Kits
Tutorials
About Us
Many audio modifications in the form of a Magisk module have a considerable
number of sound tweaks in their system.prop, but not every developer of a particular
module knows their meanings and scope. Below you can see a number of different
props (a line from build.prop) that can be used both individually and all together,
because each of them is responsible for a specific parameter that is not
interconnected with others. All props are taken from different devices, so it is possible
that some of them will not be applied correctly, or not applied at all. Props can have
numeric, string, or boolean values. All strings in the list have been tested by the
NLSound team and myself.
The build.prop file is located in the /vendor folder. The easiest way to edit build.prop
is by adding lines to the end of the file. For such actions, you definitely need ROOT
access and a file manager with support for root access.
Disable Deep Buffer.
Disabling this output will use the PRIMARY output, which is higher quality and does
not have extra processing compared to the deep_buffer output. It is not a complete
shutdown of the output, since applications that output sound through this output will
not stop using it. Only if the application can work through other outputs, these props
will remove deep_buffer from the status of the main one.
audio.deep_buffer.media=false
vendor.audio.deep_buffer.media=false
vendor.audio.feature.deepbuffer_as_primary.enable=false
qc.audio.deep_buffer.media=false
ro.qc.audio.deep_buffer.media=false
persist.vendor.audio.deep_buffer.media=false
ro.config.media_vol_steps=25
ro.vendor.audio.soundfx.type=dirac
persist.audio.dirac.speaker=true
vendor.audio.flac.sw.decoder.24bit=true
flac.sw.decoder.24bit.support=true
vendor.audio.aac.sw.decoder.24bit=true
vendor.audio.use.sw.alac.decoder=true
vendor.audio.flac.sw.encoder.24bit=true
vendor.audio.aac.sw.encoder.24bit=true
vendor.audio.use.sw.ape.decoder=true
vendor.audio.tunnel.encode=true
tunnel.audio.encode=true
qc.tunnel.audio.encode=true
use.non-omx.mp3.decoder=false
use.non-omx.aac.decoder=false
use.non-omx.flac.decoder=false
media.aac_51_output_enabled=true
vendor.audio.parser.ip.buffer.size=262144
vendor.mm.enable.qcom_parser=63963135
Shutdown
Something from "low power", and the sound becomes more saturated.
lpa.decode=false
lpa30.decode=false
lpa.use-stagefright=false
lpa.releaselock=false
af.thread.throttle=0
audio.playback.mch.downsample=false
vendor.audio.playback.mch.downsample=false
persist.vendor.audio.playback.mch.downsample=false
Features
Futures from about the middle of the build.prop file. Look in your firmware and make
sure that you have such lines, otherwise there will definitely be no point in using
them. Expansion of the capabilities of the DSP module, speaker output and TFA
amplifier, if available. Also turn off compression, bring the sound to its original form,
turn off power control.
vendor.audio.feature.dynamic_ecns.enable=true
vendor.audio.feature.external_dsp.enable=true
vendor.audio.feature.external_qdsp.enable=true
vendor.audio.feature.external_speaker.enable=true
vendor.audio.feature.external_speaker_tfa.enable=true
vendor.audio.feature.receiver_aided_stereo.enable=true
vendor.audio.feature.ext_hw_plugin=true
vendor.audio.feature.source_track_enabled=true
vendor.audio.feature.keep_alive.enable=true
vendor.audio.feature.compress_meta_data.enable=false
vendor.audio.feature.compress_in.enable=false
vendor.audio.feature.compr_cap.enable=false
vendor.audio.feature.compr_voip.enable=false
vendor.audio.feature.devicestate_listener.enable=false
vendor.audio.feature.thermal_listener.enable=false
vendor.audio.feature.power_mode.enable=true
vendor.audio.feature.hifi_audio.enable=true
ro.hardware.hifi.support=true
ro.audio.hifi=true
ro.vendor.audio.hifi=true
persist.audio.hifi=true
persist.audio.hifi.volume=72
persist.audio.hifi.int_codec=true
persist.vendor.audio.hifi=true
persist.vendor.audio.hifi.int_codec=true
Equalization settings.
Everything that makes the sound more saturated is turned on, and everything related
to the equalizer built into the system is turned off.
effect.reverb.pcm=1
audio.pp.asphere.enabled=true
vendor.audio.pp.asphere.enabled=true
vendor.audio.safx.pbe.enabled=true
vendor.audio.soundfx.usb=false
vendor.audio.keep_alive.disabled=false
ro.vendor.audio.soundfx.usb=false
ro.vendor.audio.sfx.speaker=false
ro.vendor.audio.sfx.earadj=false
ro.vendor.audio.sfx.scenario=false
ro.vendor.audio.sfx.audiovisual=false
ro.vendor.audio.sfx.independentequalizer=false
ro.vendor.audio.3d.audio.support=true
persist.vendor.audio.ambisonic.capture=true
persist.vendor.audio.ambisonic.auto.profile=true
vendor.voice.dsd.playback.conc.disabled=false
vendor.audio.hdr.record.enable=true
vendor.audio.3daudio.record.enable=true
ro.vendor.audio.recording.hd=true
ro.ril.enable.amr.wideband=1
persist.audio.lowlatency.rec=true
vendor.audio.matrix.limiter.enable=0
vendor.audio.capture.enforce_legacy_copp_sr=true
vendor.audio.snd_card.open.retries=50
vendor.audio.volume.headset.gain.depcal=true
vendor.audio.hal.output.suspend.supported=true
vendor.audio.tfa9874.dsp.enabled=true
ro.audio.soundtrigger.lowpower=false
ro.vendor.audio.soundtrigger.adjconf=true
ro.vendor.audio.ns.support=true
ro.vendor.audio.enhance.support=true
ro.vendor.audio.gain.support=true
persist.vendor.audio.ll_playback_bargein=true
persist.vendor.audio.bcl.enabled=false
persist.vendor.audio.format.24bit=true
persist.vendor.audio_hal.dsp_bit_width_enforce_mode=24
persist.vendor.audio.delta.refresh=true
audio.effect.a2dp.enable=1
vendor.audio.effect.a2dp.enable=1
qcom.hw.aac.encoder=true
vendor.audio.hw.aac.encoder=true
persist.service.btui.use_aptx=1
persist.bt.enableAptXHD=true
persist.bt.a2dp.aptx_disable=false
persist.bt.a2dp.aptx_hd_disable=false
persist.bt.a2dp.aac_disable=false
persist.bt.sbc_hd_enabled=1
persist.vendor.btstack.enable.lpa=false
persist.vendor.bt.a2dp.aac_whitelist=false
persist.vendor.bt.aac_frm_ctl.enabled=true
persist.vendor.bt.aac_vbr_frm_ctl.enabled=true
persist.vendor.btstack.enable.twsplus=true
persist.vendor.btstack.enable.twsplussho=true
persist.vendor.qcom.bluetooth.scram.enabled=false
persist.vendor.qcom.bluetooth.aac_frm_ctl.enabled=true
persist.vendor.qcom.bluetooth.aac_vbr_ctl.enabled=true
persist.vendor.qcom.bluetooth.twsp_state.enabled=false
persist.bluetooth.sbc_hd_higher_bitrate=1
persist.sys.fflag.override.settings_bluetooth_hearing_aid=true
Also, there is a small list of problematic lines that can disrupt the device:
vendor.audio.feature.compress_in.enable=false
vendor.audio.feature.compr_voip.enable=false
persist.vendor.audio_hal.dsp_bit_width_enforce_mode=24
qcom.hw.aac.encoder=true
vendor.audio.hw.aac.encoder=true
persist.vendor.qcom.bluetooth.aac_vbr_ctl.enabled=true
persist.vendor.btstack.enable.twsplus=true
persist.vendor.qcom.bluetooth.scram.enabled=false
Don't forget to backup your build.prop file before installing props to avoid possible
problems.
If the application of the strings caused problems, then select the problematic ones
from the list and try without them. If the problems remain, then use the elimination
method to find the line that causes your problem. In the future, an article of this kind
about the mixer_paths.xml file is possible. Happy use.
Related Articles
Flutter: Everything you need to protect your data
This article will tell you in what general ways you can protect your application from
hacking or
How it all started The road to protecting Android has been thorny. At the end of 2021,
Android
When it comes to quality portable audio, hi-fi audio players immediately come to
mind. The
Comments(2)
Tim
29 June 2022 01:30
Thanks for all of this, I had never encountered a number of these. I've been trying for a
minute to find a 'comprehensive' (as much as is possible, at least) list of audio build
props with descriptions (and non-audio.... it'd be nice to know what already exists) and
this is definitely the best I've found -- I really appreciate them broken into categories
with general descriptions.
It would be nice if there were such a comprehensive list of build props with
descriptions in, say, the AOSP repos I've done quite a bit of looking, but not had
any luck. It's possible I've missed, though, given the AOSP source tree is rather large.
One thing I'm not sure I'm understanding correctly.... Are the values given throughout
the article recommended for best audio quality? I was under the impression this was
the purpose of the article, but then I got to the "...small list of problematic lines..." and
realized that the exact same lines are listed above, with the same values.
Reply
wyup
10 August 2022 00:51
About Deep Buffer, I'm not sure if it's onvenient to disable since it lowers battery
consumption by means of a big buffer, and Primary Outpud doesn't have better quality
since it is low latency by default (fast and worse quality).
Reply
Name: *
Comment:
Trending Now
DEVLISTER.COM
Privacy Policy
DMCA
Disclaimer
Contact
Blog
Mobile Apps
UI Kits
Tutorials
OTHER SECTIONS