Professional Documents
Culture Documents
TDS Hyperdesmo Classic
TDS Hyperdesmo Classic
TDS Hyperdesmo Classic
com
Page 1/4
HYPERDESMO®-CLASSIC
Polyurethane liquid membrane for waterproofing & protection,
easy application.
DESCRIPTION
HYPERDESMO®-CLASSIC is a simple and
economic solution for waterproofing and
When used in dark colours for exposed
protection. It is a one component, low viscosity,
use, a protective topcoat of HYPERDESMO®-
polyurethane fluid which cures with the humidity
ADY-E (always pigmented) is required.
in the atmosphere to produce a highly elastic
membrane with strong adhesion to many types of
FEATURES & BENEFITS
surfaces.
• No thinning is required but SOLVENT-01 may be
used.
It is based on pure elastomeric hydrophobic
• Excellent weather and UV resistance. The white
polyurethane resin plus special inorganic fillers,
colour reflects much of the solar energy and so
which result in excellent mechanical, chemical,
reduces the internal temperature of buildings
thermal, UV and natural element resistance
considerably.
properties.
• Excellent thermal resistance, the product never
turns soft. Max service temperature 80 oC, max
Apply with brush, roller or airless spraying in two
shock temperature 200 oC.
coats. Minimum total consumption: 1.2-1.5
• Resistance in the cold: The film remains elastic
kg/m2.
even down to -40 oC.
COMPLIANCE - CERTIFICATION
• Excellent mechanical properties.
• CE: ETA-04/0082. See table below.
• Good chemical resistance.
• Non-toxic after full cure.
RECOMMENDED FOR • Water vapor transmission: The film breathes so
Waterproofing and protection of: there is no accumulation of humidity under the
• Gypsum and cement boards, coat.
• tiles (under),
• bathrooms, APPLICATION PREREQUISITES
• roofs,
Can be successfully applied on:
• light roofing made of metal or fibrous cement,
Concrete, fibrous cement, mosaic, cement roof
• asphalt membranes.
tiles, old (but well adhered) acrylic and asphalt
• As the main waterproofing membrane in car
coats, wood, corroded metal, galvanized steel.
park waterproofing systems.
For information about other substrates, please
contact our tech department.
LIMITATIONS
Not recommended for: Concrete substrate conditions (standard):
• unsound substrates, • Hardness: R28 = 15Mpa.
• waterproofing of swimming pool surfaces in • Humidity: W < 10%.
contact with chemically treated water. • Temperature: 5-35 oC.
Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & OHSAS 18001.
HYPERDESMO®-CLASSIC/EE/01-03-16
alchimica.com
Page 2/4
HYPERDESMO®-CLASSIC
Priming:
SHELF LIFE
Apply the required primer following the guidelines
Can be kept for minimum 12 months in the
above.
original unopened pails in dry places and at
temperatures of 5-25 oC. Once a pail has been
Mixing:
opened, use as soon as possible.
Use a low speed (300 rpm) mixer. May optionally
be thinned with 5-10% SOLVENT-01. For
application by spraying (airless) thin with 10% PRECAUTIONS
SOLVENT-01. Contains volatile flammable solvents. Apply in
well-ventilated, no smoking areas, away from
Application: naked flames. In closed spaces use ventilators
Apply the material with roller or brush in two, at and carbon active masks. Keep in mind that
least, coats. Leave 6-24 hours between coats. If solvents are heavier than air so they creep on the
more time passes (for example more than 4 days) floor. The MSDS (Material Safety Data Sheet) is
or if you are unsure of the interlayer adhesion, available on request.
use UNIVERSAL PRIMER-2K-4060.
Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & OHSAS 18001.
HYPERDESMO®-CLASSIC/EE/01-03-16
alchimica.com
Page 3/4
HYPERDESMO®-CLASSIC
APPROVAL)
HYPERDESMO® +
REQUIREMENT HYPERDESMO®
HYPERDESMO®-ADY
Minimum expected working life W3 (25 years) W2 (10 years)
User load P1 P3
Roof slope S1-S4
Minimum surface temperature TL3 (-20 οC)
TECHNICAL SPECIFICATIONS
The product in liquid form (before application):
95% dry matter in Xylol.
o
Service temperature C - -40 to 80
Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & OHSAS 18001.
HYPERDESMO®-CLASSIC/EE/01-03-16
alchimica.com
Page 4/4
HYPERDESMO®-CLASSIC
Tensile strength at break @ Kg/cm2
ASTM D412 / EN-ISO-527-3 55
23 oC (N/mm2)
Kg/cm2
Adhesion to concrete ASTM D4541 > 20 (> 2)
(N/mm2)
QUV Accelerated Weathering
Test (4hr UV, @ 60 oC (UVB- passed
- ASTM G53
Lamps) & 4hr COND @ 50 (2000 hours)
o
C)
no significant
Hydrolysis (8% KOH, 15
- - elastomeric
days @ 50°C)
property change
no significant
Hydrolysis (H2O, 14-day
- - elastomeric
cycle RT-100 °C)
property change
no significant
Hydrolysis (H2O, 30-day
- - elastomeric
cycle 60-100 °C)
property change
no significant
HCL (PH=2, 10 days @ RT) - - elastomeric
property change
Thermal resistance (100
- EOTA TR011 passed
days @ 80 °C)
Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & OHSAS 18001.
HYPERDESMO®-CLASSIC/EE/01-03-16