Professional Documents
Culture Documents
EVCF-A Filling Valve EN
EVCF-A Filling Valve EN
Filling Valves
Technical specification
Description: Filling valves
Size: DN-32 to DN-200
Flow rate: 160 – 7000 l/min
Opening pressure: 0.12, 0.13 & 0.15 bar
Pressure: max. 350 & 400 bar
Fluid temperature: -20°C to 75°C
Viscosity: 30 to 100 mm²/s (cSt) at 40°C
Technical specification subject to change without prior notice. Other specification on request. 2013/07/23
Recommended filtration: 25 µm
Compatibility: Suitable for hydraulic oils in compliance with
DIN51524
Weight: max. 116 kg
PP P
Hydraulic scheme: PP Pilot port
P Auxiliary
pressure port
IN OUT
IN Tank side
OUT Cylinder side
1
Order information
Max. Opening Decompr. Max. pilot Opening
Order code Size Max. flow Weight
pressure ratio Ratio Pressure pressure
EVCF-A114 DN-32 160 l/min 400 bar 3.6 : 1 1:5 100 bar 0.12 bar 1.2 kg
EVCF-A112 DN-40 250 l/min 400 bar 3.9 : 1 1:5 100 bar 0.12 bar 1.7 kg
EVCF-A200 DN-50 400 l/min 400 bar 4.2 : 1 1:5 100 bar 0.12 bar 2.5 kg
EVCF-A212 DN-63 600 l/min 400 bar 4.2 : 1 1:5 100 bar 0.13 bar 3.5 kg
EVCF-A300 DN-80 1000 l/min 400 bar 4.5 : 1 1:5 100 bar 0.13 bar 5.2 kg
EVCF-A400 DN-100 1600 l/min 400 bar 4.3 : 1 1:5 100 bar 0.13 bar 12.0 kg
EVCF-A500 DN-125 2500 l/min 400 bar 4.3 : 1 1:5 100 bar 0.13 bar 20.0 kg
EVCF-A600 DN-160 4000 l/min 400 bar 4.3 : 1 1:5 100 bar 0.15 bar 42.0 kg
EVCF-A800 DN-200 7000 l/min 350 bar 4.0 : 1 1:5 100 bar 0.15 bar 116.0 kg
For an optional pre-opening device (from size 114 to 400 only) add “-PO” to the order code.
For a complete assembly with 2 flanges add “-FL”.
0.4 0.4
∆p (bar)
∆p (bar)
EVCF-A114 EVCF-A112 EVCF-A212 EVCF-A300
0.3 0.3
EVCF-A200 EVCF-A400
0.2 0.2
0.1
0.1
0
0
0 100 200 300 400 500
Flow rate (l/min) Flow rate (l/min)
0.4
∆p (bar)
EVCF-A500 EVCF-A600
0.3
EVCF-A800
0.2
Technical specification subject to change without prior notice. Other specification on request. 2013/07/23
0.1
0
0 1000 2000 3000 4000 5000 6000 7000
Flow rate (l/min)
2
Dimensional drawings
Filling Valves
No. Description
1 Steel body
2 Pilot piston body
3 Obturator
4 Piston pilot
5 Spring locking cap
6 Obturator return spring
7 Pilot piston return spring
8 Locking ring
9 Braking grub screw
10 Seal
Technical specification subject to change without prior notice. Other specification on request. 2013/07/23
11 Seal
12 Screws
3
Flange dimensions
Technical specification subject to change without prior notice. Other specification on request. 2013/07/23