Professional Documents
Culture Documents
IL300 Vishay
IL300 Vishay
IL300 Vishay
www.vishay.com
Vishay Semiconductors
Linear Optocoupler, High Gain Stability, Wide Bandwidth
FEATURES
• Couples AC and DC signals
C 1 8 NC
• 0.01 % servo linearity
A 2 7 NC
K1 K2 • Wide bandwidth, > 200 kHz
C 3 6 C
• High gain stability, ± 0.005 %/°C typically
A 4 5 A • Low input-output capacitance
i179026_2
• Low power consumption, < 15 mW
V
D E
• Isolation test voltage, 5300 VRMS, 1 s
i179026
• Internal insulation distance, > 0.4 mm
• Compliant to RoHS Directive 2002/95/EC and in
DESCRIPTION accordance to WEEE 2002/96/EC
The IL300 linear optocoupler consists of an AlGaAs IRLED
irradiating an isolated feedback and an output PIN
APPLICATIONS
photodiode in a bifurcated arrangement. The feedback • Power supply feedback voltage/current
photodiode captures a percentage of the LEDs flux and • Medical sensor isolation
generates a control signal (IP1) that can be used to servo the • Audio signal interfacing
LED drive current. This technique compensates for the
LED’s non-linear, time, and temperature characteristics. • Isolated process control transducers
The output PIN photodiode produces an output signal (IP2) • Digital telephone isolation
that is linearly related to the servo optical flux created by the
LED. AGENCY APPROVALS
The time and temperature stability of the input-output • UL file no. E52744, system code H
coupler gain (K3) is insured by using matched PIN • DIN EN 60747-5-2 (VDE 0884)
photodiodes that accurately track the output flux of the LED.
• DIN EN 60747-5-5 (pending) available with option 1
• BSI
• FIMKO
ORDERING INFORMATION
DIP-8 Option 6
I L 3 0 0 - D E F G - X 0 # # T
7.62 mm 10.16 mm
PART NUMBER K3 BIN PACKAGE OPTION TAPE
AND Option 7 Option 9
REEL
AGENCY
CERTIFIED/ K3 BIN
PACKAGE
UL, cUL, BSI,
FIMKO 0.557 to 1.618 0.765 to 1.181 0.851 to 1.181 0.765 to 0.955 0.851 to 1.061 0.945 to 1.181 0.851 to 0.955 0.945 to 1.061
Vin U1 2 7
The ratio of the input photodiode current (IP1) to the LED Vb
K2 VCC
K1
current (IF) i.e., K1 = IP1/IF. - IF -
VCC 3 6 VCC
U2 Vout
K2-FORWARD GAIN Vc
4 5 +
The ratio of the output photodiode current (IP2) to the LED lp1 R2
R1 lp2
current (IF), i.e., K2 = IP2/IF.
K3-TRANSFER GAIN
iil300_01
The transfer gain is the ratio of the forward gain to the servo
gain, i.e., K3 = K2/K1. Fig. 1 - Typical Application Circuit
SWITCHING CHARACTERISTICS
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
tr 1 μs
Switching time ΔIF = 2 mA, IFq = 10 mA
tf 1 μs
Rise time tr 1.75 μs
Fall time tf 1.75 μs
35 0.010
30 0°
0.008
25°
25 50°
0.006 75°
20
100°
15 0.004
10
0.002
5
0 0
1.0 1.1 1.2 1.3 1.4 0.1 1 10 100
iil300_02 VF - LED Forward Voltage (V) 17754 IF - L ED Current (mA)
Fig. 2 - LED Forward Current vs. Forward Voltage Fig. 5 - Servo Gain vs. LED Current and Temperature
300 1.010
VD = - 15 V Normalized to:
K3 - Transfer Gain - (K2/K1)
IP1 - Servo Photocurrent (µA)
0 °C
250 0 °C IF = 10 mA
25 °C
50 °C 1.005 TA = 25 °C
200 75 °C 25 °C
150 1.000
50 °C
100
75 °C
0.995
50
0 0.990
0.1 1 10 100 0 5 10 15 20 25
iil300_04 IF - LED Current (mA) iil300_11 IF - LED Current (mA)
Fig. 3 - Servo Photocurrent vs. LED Current and Temperature Fig. 6 - Normalized Transfer Gain vs.
LED Current and Temperature
3.0 5
Normalized to: IP1 at IF = 10 mA IF = 10 mA, Mod = ± 2.0 Ma (peak)
Amplitude Response (dB)
Normalized Photocurrent
2.5 TA = 25 °C 0
0 °C
VD = - 15 V RL = 1 kΩ
25 °C
2.0
50 °C -5
75 °C
1.5
- 10
1.0 RL = 10 kΩ
0.5 - 15
0.0 - 20
0 5 10 15 20 25 104 105 106
iil300_06 IF - LED Current (mA) iil300_12 F - Frequency (Hz)
Fig. 4 - Normalized Servo Photocurrent vs. Fig. 7 - Amplitude Response vs. Frequency
LED Current and Temperature
Phase
110/ DC output
AC/DC AC/DC
220 Switch Xformer
rectifier rectifier
main
Switch
Control
mode Isolated
regulator feedback
TDA4918
iil300_17
R1 IL300
20 kΩ 1 8
V monitor 3 7 R4
+ V CC
Va 100 Ω
U1 6
2 7
LM201 K2
R2 2 1
Vb K1
30 kΩ -
8 V CC 3 6 V CC
4 100 pF V out To
4 5 control
R3 R5 input
30 kΩ 30 kΩ
iil300_18
TABLE 1 - R5 SELECTION
K3 R5 RESISTOR
BIN
MIN. MAX. TYP. 1 % kΩ
A 0.560 0.623 0.59 51.1
B 0.623 0.693 0.66 45.3
C 0.693 0.769 0.73 41.2
D 0.769 0.855 0.81 37.4
E 0.855 0.950 0.93 32.4
F 0.950 1.056 1 30
G 1.056 1.175 1.11 27
H 1.175 1.304 1.24 24
I 1.304 1.449 1.37 22
J 1.449 1.610 1.53 19.4
0.015
0.010
0.005
0.000
- 0.005
- 0.010
- 0.015
4.0 4.5 5.0 5.5 6.0
iil300_20 Vin - Input Voltage (V)
Phase
0 0 figure 17. In order for the amplifier to respond to a signal that
-8 - 180
103 104 105 106
iil300_21 F - Frequency (Hz)
Vin 3+ 7
Vcc
6 100 Ω + Vref2
R1 1 IL 300 8
R2
2 Vcc + Vcc 3+ 7
– 2 7 Vcc
4 Vcc 6
20 pF
3 6
Vout
R3 2– - Vcc
4 5
- Vcc 4
+ Vref1
iil300_22 R4
V OUT - K3 x R4 x R2 x ( R5 + R6 ) V ref1 x R4 x ( R5 + R6 ) x K3
Inverting Non-inverting ------------- = ------------------------------------------------------------------------------ V ref2 = ------------------------------------------------------------------------------
V IN R3 x ( R1 x R2 ) R3 x R6
Inverting
V OUT - K3 x R4 x R2 - V ref1 x R4 x K3
Non-inverting Inverting ------------- = ------------------------------------------ V ref2 = ----------------------------------------------
V IN R3 x ( R1 x R2 ) R3
4 5
ISO method A
3° 10°
9
0.203 2.794
i178010 0.305 3.302
0.7 4.6
4.1 0.102
0.249
8 min. 0.25 typ.
0.51
0.35 1.02
0.25 8.4 min. 15° max.
8 min.
10.16
10.92 10.3 max. 18450
IL300-E
X001
V YWW H 68
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.