Professional Documents
Culture Documents
SPLM2 Kinetics
SPLM2 Kinetics
SPLM2 Kinetics
Chapter 2 (Kinetics) 1
Kinetics
Force
➔ PUSH/ PULL
➔ unit:
Newton (N)
(kg.m/s2)
➔It is a VECTOR
QUANTITY
3
Types of Force:
4
(Weight)
5
6
7
How to deal with forces?
Free Body Diagram
To keep things simple ➔ only draw forces that
acting on the object
Example:
N
W
8
Exercise:
9
How to calculate forces?
Force is Vector, so….
➔ Calculate forces : calculate vectors!
Example:
A body is pulled in two opposing
directions by two ropes as shown in
Figure beside. The resultant force acting
is the vector sum of the forces.
12
Resultant Force
➔A single force that represents all the
forces acted on the system
𝑭𝒚
𝑭𝒙
𝟐
Horizontal component (x-axis)
𝑭= 𝑭𝒙 𝟐 + 𝑭𝒚 𝐅𝐱 = 𝐅 𝐜𝐨𝐬 𝛉
𝑭𝒚 Vertical Component (y-axis)
𝜽 = 𝐭𝐚𝐧−𝟏 | |
𝑭𝒙 𝐅𝐲 = 𝐅 𝐬𝐢𝐧 𝛉 13
Steps in solving resultant forces
16
Forces Balanced ➔ Equilibrium
Example:
16
Example:
Consider the situation below. If the forces on this box are
balanced:
a) write an equation for the components of the forces
parallel to the ramp. Calculate for F.
b) write equation for the forces perpendicular to the
ramp. Find N.
17
Example:
A ball of weight 10 N is suspended on a
string and pulled to one side by another
horizontal string as shown beside.
If the forces are balanced:
(a) write an equation for the horizontal
components of the forces acting on the
ball
(b) write an equation for the vertical
components of the forces acting on the
ball
(c) Calculate the tension in the upper
string, T
(d)find the horizontal force F.
24
Example:
A rock climber is hanging from a rope
attached to the cliff by two bolts as
shown in Figure beside. If the forces are
balanced
a) write an equation for the vertical
component of the forces on the knot
b) write an equation for the horizontal
forces exerted on the knot
c) calculate the tension T in the ropes
joined to the bolts.
19
Newton’s Laws of Motion
1st Law:
A body will remain at rest or moving with constant
velocity unless acted upon by an unbalanced force.
Net force = 0 ➔ no acceleration
ΣF =0
20
Example:
21
Example:
22
Example:
23
Example:
24
25
2nd Law:
The acceleration of an object is
directly proportional to the net force acting on it and
inversely proportional to its mass.
Σ F = m. a
26
27
Example:
28
Example:
29
Conventional steps in solving
2nd and 3rd Laws of motion
1. Find T.
44
Example 3
Try This!
1. A car of mass m is on an icy driveway inclined at an
angle =30.0o, as in Figure 4.16a. Determine (a) the
acceleration of the car, assuming that the incline is
frictionless. (b) If the length of the driveway is 20.0 m
and the car starts from rest at the top, how long does it
take to travel to the bottom? (c) What is the car’s speed
at the bottom?
Answers:
A.) a=4.90gm/s²
B.) t=2.86sec
C.) 𝑉𝑓 = 14𝑚/𝑠
4
1
2.
Answers:
A.) 3.35 m/s²
B.) 3.86 sec
C.) 12.9 m/s
3.
• Simple Pulley system
Find T.
45
3rd Law:
If body A exerts a force on body B then body B will
exert an equal and opposite force on body A.
36
37
4
0
Frictional Force
A frictional force ➔ vector
sum of many forces acting
between the surface atoms of
one body and those of
another body
39
Types of Frictional Force:
✓Static Friction (fs)
40
✓Kinetic Friction (fk)
41
Static Frictional Force:
fs ≤ s.N
Maximum static frictional force: ➔ in verge of
slipping
fs max = s.N
s= coefficient of static friction ➔ depend on the
nature of surfaces
N = Normal force
Kinetic Frictional Force:
fk = k.N
k= coefficient of kinetic friction
Note:
, coefficient of friction is always positive (+)
42
43
Conventional steps in solving
2nd and 3rd Laws of motion
45
Example 2
64
Try This!
1.
Answer: 19.3°
2.