This document is a report on a structural engineering practicum analyzing shear truss frame systems. It includes:
1) An overview of shear truss frames consisting of rigid frames with diagonal bracing that act as trusses to resist lateral loads in all directions.
2) A case study of the BBVA Bancomer Tower designed using this system.
3) The design of a shear truss frame system to resist lateral loads, including structural drawings.
This document is a report on a structural engineering practicum analyzing shear truss frame systems. It includes:
1) An overview of shear truss frames consisting of rigid frames with diagonal bracing that act as trusses to resist lateral loads in all directions.
2) A case study of the BBVA Bancomer Tower designed using this system.
3) The design of a shear truss frame system to resist lateral loads, including structural drawings.
This document is a report on a structural engineering practicum analyzing shear truss frame systems. It includes:
1) An overview of shear truss frames consisting of rigid frames with diagonal bracing that act as trusses to resist lateral loads in all directions.
2) A case study of the BBVA Bancomer Tower designed using this system.
3) The design of a shear truss frame system to resist lateral loads, including structural drawings.
PRAKTIKUM MATA KULIAH STRUKTUR KONSTRUKSI DAN BAHAN III
SEMESTER GENAP TAHUN AJARAN 2017 - 2018
SISTEM STRUKTUR SHEAR TRUSS FRAME
PRAKTIKUM 4
JOB SHEET STRUKTUR BANGUNAN TINGGI KELAS : 14
KELOMPOK : : Ir. Mirza,. MT
NAMA : Muhammad Rizqan Farizi
NIM : 2004104010124
Tanggal Penilaian
Nilai
PRAKTIKUM 4
JOB Paraf Dosen
SISTEM STRUKTUR SHEAR TRUSS LANDASAN TEORI ALAT DAN BAHAN
Shear trussed frame
(braced frame)
Shear trussed frame (braced frame) systems
consist of rigid frames and braces in the form of vertical trusses
Diagonal brace elements between the columns of
the rigid frame create a truss frame at that bay where those columns act as vertical continuous chords. Columns, beams and braces are generally made of steel, sometimes composite, but rarely are of reinforced concrete. Because the lateral loads can act in all directions and/or The diagonal brace elements can be single or according to the direction of the lateral force, cyclic, brace elements are exposed to both double. Brace elements (diagonals) are designed when tension occurs in one of the brace elements tension taking buckling into account,or else double it is assumed that the other brace element diagonal braces (X-braces, chevron-braces, buckles and compression force is not developed and compression. Reinforced concrete braces are knee-braces) are used and designed in such a in the brace elements. weak in tension due to the inherent way that, characteristic of concrete. Therefore in general, steel but sometimes composite braces
are preferred. On the other hand, buckling is a
critical factor for steel braces and they
must be sized accordingly.
JOB SHEETPRAKTIKUM 4 SISTEM STRUKTUR SHEAR 1
STUDI LITERATUR
BBVA Bancomer Tower
Architects : LEGORRETA, Rogers Stirk Harbour + Partners Area : 188777 m²
Year : 2016
Location : Mexico City, Mexico
JOB SHEETPRAKTIKUM 4 SISTEM STRUKTUR SHEAR 2
DESAIN
JOB SHEETPRAKTIKUM 4 SISTEM STRUKTUR SHEAR 3
HASIL RANCANGAN
JOB SHEETPRAKTIKUM 4 SISTEM STRUKTUR SHEAR 4
JOB SHEETPRAKTIKUM 4 SISTEM STRUKTUR SHEAR 5 POSTER